successfully added to cart
View Cart

Laydown Threading

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (366)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (366)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (366)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (366)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (366)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (366)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (366)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (366)
  • M Stainless Steel (366)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (366)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (366)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (366)
  • K Cast Iron (366)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (366)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (366)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (366)
  • N Non-Ferrous Materials (365)
    • N1
      Wrought Aluminum
      (365)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (365)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (365)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (20)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (365)
    • N6
      Carbon, Graphite Composites, CFRP
      (365)
    • N7
      MMC's
      (20)
  • S High-Temp Alloys (366)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (366)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (366)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (366)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (366)
  • H Hardened Materials (20)
    • H1
      Hardened Materials 44-48 HRC
      (20)
Applications
  • Back Boring Back Boring (24)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (24)
  • Blind Hole Finishing Blind Hole Finishing (24)
  • Chamfer Turning Chamfer Turning (24)
  • Cut-Off Cut-Off (39)
  • Deep Grooving Deep Grooving (39)
  • Face Grooving Face Grooving (39)
  • Facing Facing (24)
  • Grooving Grooving (15)
  • ID Facing ID Facing (15)
  • ID Grooving ID Grooving (39)
  • ID Thread Turning ID Thread Turning (235)
  • Multiple Direction Cutting Multiple Direction Cutting (87)
  • OD Thread Turning OD Thread Turning (239)
  • Plunge Turning Plunge Turning (24)
  • Profiling Profiling (39)
  • TRN Boring TRN Boring (40)
  • Threading Threading (39)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (24)
  • Through Hole Finishing Through Hole Finishing (24)
  • Turning Turning (39)
Type of Thread
  • 55 (89)
  • 60 (109)
  • ACME (17)
  • API (6)
  • API BUTTRESS (5)
  • API RD (12)
  • BSPT (16)
  • BSW (121)
  • M (207)
  • NPT (62)
  • NPTF (16)
  • RD DIN 405 (88)
  • STUB ACME (17)
  • TR DIN 103 (91)
  • UN (114)
  • UNJ (16)
Tool Cutting Edge Angle
  • 90.0 (98)
to
Connection Style
  • Boring Bar Shank (43)
  • KM (23)
  • Toolholder (31)
Cutting Edges Per Insert
  • 3.0 (390)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.03 (6)
  • 0.033 (2)
  • 0.038 (5)
  • 0.04 (2)
  • 0.05 (1)
  • 0.051 (84)
  • 0.056 (15)
  • 0.07 (22)
  • 0.071 (1)
  • 0.073 (1)
  • 0.076 (30)
  • 0.08 (19)
  • 0.081 (5)
  • 0.082 (14)
  • 0.085 (14)
  • 0.086 (1)
  • 0.091 (1)
  • 0.094 (1)
  • 0.097 (5)
  • 0.1 (14)
  • 0.102 (5)
  • 0.108 (16)
  • 0.135 (1)
  • 0.152 (23)
  • 0.159 (1)
  • 0.16 (5)
  • 0.178 (1)
  • 0.2 (6)
  • 0.203 (24)
  • 0.21 (33)
  • 0.223 (1)
  • 0.225 (2)
  • 0.226 (1)
  • 0.23 (2)
  • 0.24 (14)
  • 0.269 (1)
  • 0.279 (26)
  • 0.3 (2)
  • 0.305 (10)
  • 0.31 (10)
  • 0.318 (1)
  • 0.381 (1)
  • 0.432 (15)
  • 0.51 (1)
  • 0.533 (7)
  • 0.61 (1)
  • 0.64 (2)
  • 0.69 (2)
  • 0.7 (18)
  • 0.755 (2)
  • 0.76 (15)
  • 0.93 (7)
  • 0.936 (17)
  • 0.97 (1)
  • 1.01 (6)
  • 1.404 (7)
  • 1.515 (6)
to
Corner Radius
  • 0.0012 (6)
  • 0.0013 (2)
  • 0.0015 (5)
  • 0.0016 (2)
  • 0.002 (85)
  • 0.0028 (23)
  • 0.0029 (1)
  • 0.003 (30)
  • 0.0031 (14)
  • 0.0032 (19)
  • 0.0033 (14)
  • 0.0034 (1)
  • 0.0037 (1)
  • 0.0038 (5)
  • 0.0039 (14)
  • 0.004 (5)
  • 0.0043 (16)
  • 0.0053 (1)
  • 0.006 (23)
  • 0.0063 (6)
  • 0.007 (1)
  • 0.0079 (1)
  • 0.008 (29)
  • 0.0083 (33)
  • 0.0088 (1)
  • 0.0089 (3)
  • 0.0091 (2)
  • 0.0094 (14)
  • 0.0106 (1)
  • 0.011 (26)
  • 0.012 (12)
  • 0.0122 (10)
  • 0.0125 (1)
  • 0.015 (1)
  • 0.017 (15)
  • 0.02 (1)
  • 0.021 (7)
  • 0.022 (15)
  • 0.024 (1)
  • 0.025 (2)
  • 0.0272 (2)
  • 0.0276 (18)
  • 0.0297 (2)
  • 0.0298 (14)
  • 0.03 (1)
  • 0.0368 (7)
  • 0.0369 (17)
  • 0.038 (1)
  • 0.0398 (6)
  • 0.0553 (7)
  • 0.0597 (6)
to
Application
Grade Of Cutting Tool
  • HCK20 (17)
  • HCM15 (11)
  • K15 (66)
  • K68 (8)
  • KC5010 (10)
  • KC5025 (22)
  • KC710 (9)
  • KC720 (19)
  • KC722 (8)
  • KC730 (20)
  • KC9105 (1)
  • KU25T (8)
  • P25 (40)
  • PN120 (15)
  • SP4066 (5)
  • TN6025 (365)
  • TTS (15)
Hand Of Tool
  • L (37)
  • R (60)
Wiper Insert
  • N (390)
Minimum Axial Groove Diameter
  • 0.5 (4)
  • 0.5118 (6)
  • 0.6299 (4)
  • 0.65 (4)
  • 0.7874 (4)
  • 0.8 (4)
  • 0.9 (4)
  • 0.9449 (2)
  • 0.9843 (2)
  • 1.063 (1)
  • 1.1417 (4)
  • 1.2 (2)
  • 1.2598 (5)
  • 1.4173 (1)
  • 1.45 (1)
  • 1.5354 (1)
  • 1.5748 (5)
  • 1.7323 (1)
  • 1.8898 (1)
  • 2.126 (4)
  • 2.2835 (1)
to
Minimum Axial Groove Diameter
  • 12.7 (4)
  • 13.0 (6)
  • 16.0 (4)
  • 16.51 (4)
  • 20.0 (4)
  • 20.32 (4)
  • 22.86 (4)
  • 24.0 (2)
  • 25.0 (2)
  • 27.0 (1)
  • 29.0 (4)
  • 30.48 (2)
  • 32.0 (5)
  • 36.0 (1)
  • 36.83 (1)
  • 39.0 (1)
  • 40.0 (5)
  • 44.0 (1)
  • 48.0 (1)
  • 54.0 (4)
  • 58.0 (1)
to
Countersunk Angle
  • 15.0 (24)
  • 27.5 (36)
  • 30.0 (142)
to
Cutting Direction
  • E (43)
  • S (54)
Rake Angle Style
  • DOUBLE NEGATIVE (96)
  • POSITIVE-ZERO (1)
Maximum Bore Depth
  • 25.0 (1)
  • 25.4 (2)
  • 31.75 (2)
  • 32.0 (1)
  • 35.16 (2)
  • 38.1 (3)
  • 40.0 (4)
  • 42.0 (1)
  • 42.21 (1)
  • 45.0 (1)
  • 48.0 (1)
  • 56.11 (2)
  • 57.15 (2)
  • 60.0 (4)
  • 63.5 (2)
  • 70.02 (2)
  • 75.04 (2)
  • 76.2 (4)
  • 80.0 (5)
  • 95.25 (2)
  • 96.02 (4)
  • 100.0 (4)
  • 114.3 (2)
  • 127.0 (1)
  • 128.0 (3)
  • 160.0 (2)
  • 200.0 (1)
to
Maximum Bore Depth
  • 0.9843 (1)
  • 1.0 (2)
  • 1.25 (2)
  • 1.2598 (1)
  • 1.3842 (2)
  • 1.5 (3)
  • 1.5748 (1)
  • 1.575 (3)
  • 1.6535 (1)
  • 1.6618 (1)
  • 1.772 (1)
  • 1.8896 (1)
  • 2.209 (2)
  • 2.25 (2)
  • 2.3622 (3)
  • 2.3624 (1)
  • 2.5 (2)
  • 2.7567 (2)
  • 2.9543 (2)
  • 3.0 (4)
  • 3.1496 (5)
  • 3.75 (2)
  • 3.7803 (4)
  • 3.9372 (4)
  • 4.5 (2)
  • 5.0 (1)
  • 5.0392 (3)
  • 6.2992 (2)
  • 7.874 (1)
to
Boring Bar Material
  • C (8)
  • S (52)
Front-End
Clamp Style
  • C (26)
  • M (8)
  • S (64)
Insert Shape
  • LT-TRIANGLE LAY DOWN THREAD 60 (394)
  • ON EDGE MISC (5)
Thread TPI
  • 3.0 (1)
  • 4.0 (8)
  • 4.5 (4)
  • 5.0 (2)
  • 6.0 (6)
  • 7.0 (7)
  • 8.0 (14)
  • 9.0 (1)
  • 10.0 (8)
  • 11.0 (8)
  • 11.5 (3)
  • 12.0 (7)
  • 13.0 (2)
  • 14.0 (20)
  • 16.0 (7)
  • 18.0 (9)
  • 19.0 (4)
  • 20.0 (4)
  • 24.0 (3)
  • 26.0 (1)
  • 27.0 (4)
  • 28.0 (5)
  • 32.0 (5)
  • 36.0 (4)
  • 40.0 (1)
  • 48.0 (21)
  • 56.0 (1)
  • 64.0 (1)
to
Thread TPI
  • 3.0 (1)
  • 4.0 (8)
  • 4.5 (4)
  • 5.0 (2)
  • 6.0 (6)
  • 7.0 (7)
  • 8.0 (14)
  • 9.0 (1)
  • 10.0 (8)
  • 11.0 (8)
  • 11.5 (3)
  • 12.0 (7)
  • 13.0 (2)
  • 14.0 (20)
  • 16.0 (7)
  • 18.0 (9)
  • 19.0 (4)
  • 20.0 (4)
  • 24.0 (3)
  • 26.0 (1)
  • 27.0 (4)
  • 28.0 (5)
  • 32.0 (5)
  • 36.0 (4)
  • 40.0 (1)
  • 48.0 (21)
  • 56.0 (1)
  • 64.0 (1)
to
Thread Pitch
  • 0.35 (4)
  • 0.4 (3)
  • 0.45 (1)
  • 0.5 (8)
  • 0.6 (4)
  • 0.7 (4)
  • 0.75 (9)
  • 0.8 (7)
  • 1.0 (7)
  • 1.25 (8)
  • 1.5 (28)
  • 1.75 (10)
  • 2.0 (8)
  • 2.5 (7)
  • 3.0 (27)
  • 3.5 (5)
  • 4.0 (10)
  • 4.5 (3)
  • 5.0 (13)
  • 5.5 (3)
  • 6.0 (9)
to
Thread Pitch
  • 0.35 (4)
  • 0.4 (3)
  • 0.45 (1)
  • 0.5 (8)
  • 0.6 (4)
  • 0.7 (4)
  • 0.75 (9)
  • 0.8 (7)
  • 1.0 (7)
  • 1.25 (8)
  • 1.5 (28)
  • 1.75 (10)
  • 2.0 (8)
  • 2.5 (7)
  • 3.0 (27)
  • 3.5 (5)
  • 4.0 (10)
  • 4.5 (3)
  • 5.0 (13)
  • 5.5 (3)
  • 6.0 (9)
to
Insert Geometry
Shape
  • LT-TRIANGLE LAY DOWN THREAD 60 (301)
Insert IC Size
  • 0.25 (39)
  • 0.375 (169)
  • 0.5 (41)
  • 0.625 (9)
to
Insert IC Size
  • 6.35 (39)
  • 9.525 (169)
  • 12.7 (41)
  • 15.875 (9)
to
Insert Seat Size
  • 2 (54)
  • 3 (187)
  • 4 (41)
  • 5 (19)
Cutting Tool Material
  • H W (344)
Back-End
Connection Type
  • BORING BAR (42)
  • CYLINDRICAL (1)
  • SQUARE SHANK (31)
  • TAPER SHANK (23)
System Size
  • KM40TS (23)
Back-End Diameter
  • 0.375 (3)
  • 0.4724 (1)
  • 0.5 (2)
  • 0.5906 (1)
  • 0.625 (2)
  • 0.75 (10)
  • 0.7874 (8)
  • 0.9843 (4)
  • 1.25 (3)
  • 1.2598 (6)
  • 1.5748 (26)
  • 1.9685 (1)
to
Back-End Diameter
  • 9.525 (3)
  • 12.0 (1)
  • 12.7 (2)
  • 15.0 (1)
  • 15.875 (2)
  • 19.05 (10)
  • 20.0 (8)
  • 25.0 (4)
  • 31.75 (3)
  • 32.0 (6)
  • 40.0 (26)
  • 50.0 (1)
to
other
Grade
  • HCK20 (1)
  • HCM15 (1)
  • K15 (14)
  • P25 (4)
  • PN120 (2)
  • TN6025 (277)
  • TTS (2)
  • W (57)
Platform
  • KM40 (23)
  • Laydown Threading (165)
Tool Unit
  • I (338)
  • M (362)
Over All Length [L]
  • 40.0 (7)
  • 45.0 (3)
  • 60.0 (2)
  • 70.0 (2)
  • 75.0 (1)
  • 80.0 (2)
  • 82.55 (2)
  • 90.0 (2)
  • 100.0 (6)
  • 110.0 (4)
  • 125.0 (1)
  • 127.0 (4)
  • 128.0 (1)
  • 136.0 (1)
  • 150.0 (1)
  • 152.4 (13)
  • 153.0 (1)
  • 155.0 (1)
  • 173.0 (1)
  • 175.0 (1)
  • 176.0 (1)
  • 177.8 (9)
  • 180.0 (8)
  • 200.0 (4)
  • 203.2 (2)
  • 205.0 (1)
  • 206.0 (1)
  • 250.0 (6)
  • 254.0 (7)
  • 300.0 (2)
  • 350.0 (1)
to
Over All Length [L]
  • 1.5748 (4)
  • 1.575 (3)
  • 1.7717 (2)
  • 1.772 (1)
  • 2.3622 (2)
  • 2.7559 (2)
  • 2.9528 (1)
  • 3.1496 (2)
  • 3.25 (2)
  • 3.5433 (2)
  • 3.937 (6)
  • 4.3307 (4)
  • 4.9213 (1)
  • 5.0 (4)
  • 5.0394 (1)
  • 5.3543 (1)
  • 5.9055 (1)
  • 6.0 (13)
  • 6.0236 (1)
  • 6.1024 (1)
  • 6.811 (1)
  • 6.8898 (1)
  • 6.9291 (1)
  • 7.0 (9)
  • 7.0866 (8)
  • 7.874 (4)
  • 8.0 (2)
  • 8.0709 (1)
  • 8.1102 (1)
  • 9.8425 (6)
  • 10.0 (7)
  • 11.811 (2)
  • 13.7795 (1)
to
Insert Hand
  • L (155)
  • R (236)
No filters matching ""
View Products in
Metric
Inch
Laydown Threading

Threading Inserts
(48 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [EX] Profile Distance [EX] Profile Distance [E] Profile Distance [E] Profile Distance Insert Size Thread Pitch INS_IRR_CTLG_THREAD_PITCH_I
3118234 2EL05ISO 2EL05ISO TN6025 0.6000 .0240 0.4000 .0160 2 0,50  
    Your price::
    Qty
    3118236 2EL06ISO 2EL06ISO TN6025 0.6000 .0240 0.6000 .0240 2 0,6  
      Your price::
      Qty
      3118238 2EL075ISO 2EL075ISO TN6025 0.6000 .0240 0.6000 .0240 2 0,75  
        Your price::
        Qty
        3118240 2EL07ISO 2EL07ISO TN6025 0.6000 .0240 0.6000 .0240 2 0,7  
          Your price::
          Qty
          3118242 2EL08ISO 2EL08ISO TN6025 0.6000 .0240 0.6000 .0240 2 0,8  
            Your price::
            Qty
            3118374 2EL10ISO 2EL10ISO TN6025 0.7000 .0280 0.7000 .0280 2 1,0  
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              Laydown Threading

              Threading Inserts
              (10 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [RC] Corner Radius Center [RC] Corner Radius Center [EX] Profile Distance [EX] Profile Distance [E] Profile Distance [E] Profile Distance Insert Size Thread Pitch INS_IRR_CTLG_THREAD_PITCH_I TPI
              2100216 2ELA60 2ELA60 TN6025 0.0500 .0020 0.8000 .0310 0.9000 .0350 2     48-16
                Your price::
                Qty
                2007404 2ERA60 2ERA60 TN6025 0.0510 .0020 0.9000 .0354 0.8000 .0315 2 0,50-1,50   16-48
                  List price:
                  $22.25 /each.
                  Your price::
                  Qty

                  Sold in pkg. of 10

                  2100240 3ELA60 3ELA60 TN6025 0.0510 .0020 0.7870 .0310 0.8890 .0350 3 0,50-1,50   16-48
                    Your price::
                    Qty
                    2071904 3ELAG60 3ELAG60 TN6025 0.0760 .0030 1.1940 .0470 1.7020 .0670 3 0,50-3,0   8-48
                      List price:
                      $23.77 /each.
                      Your price::
                      Qty
                      2018236 3ELG60 3ELG60 TN6025 0.2790 .0110 1.1940 .0470 1.7020 .0670 3 1,75-3,0   8-14
                        List price:
                        $24.26 /each.
                        Your price::
                        Qty

                        Sold in pkg. of 10

                        2018214 3ERA60 3ERA60 TN6025 0.0510 .0020 0.7870 .0310 0.8890 .0350 3 0,50-1,50   16-48