successfully added to cart
View Cart

Notifications

Mark all as read

Small Hole Boring Bars For Turning

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Select First Choice
  • IN (1)
  • US (43)
Applications
  • Multiple Direction Cutting Multiple Direction Cutting (169)
  • Profiling Profiling (38)
  • TRN Boring TRN Boring (181)
Workpiece Material
  • P Steel (211)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (211)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (211)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (211)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (211)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (211)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (211)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (211)
  • M Stainless Steel (211)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (211)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (211)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (211)
  • K Cast Iron (211)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (211)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (211)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (211)
  • N Non-Ferrous Materials (211)
    • N1
      Wrought Aluminum
      (211)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (211)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (207)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (140)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (115)
    • N6
      Carbon, Graphite Composites, CFRP
      (115)
    • N7
      MMC's
      (140)
  • S High-Temp Alloys (66)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (66)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (66)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (66)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (59)
  • H Hardened Materials (37)
    • H1
      Hardened Materials 44-48 HRC
      (37)
    • H2
      Hardened Materials 48-55 HRC
      (37)
    • H3
      Hardened Materials 56-60 HRC
      (37)
    • H4
      Hardened Materials >60 HRC
      (37)
Cutting Condition
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (138)
  • Varying Depth of Cut (138)
Cutting Condition Material
  • K-All (127)
  • M-All (14)
  • N-All (124)
  • P-All (14)
  • S-All (7)
Tool Cutting Edge Angle
  • 45.0 (2)
  • 60.0 (3)
  • 90.0 (45)
  • 93.0 (19)
  • 95.0 (140)
  • 97.0 (8)
to
Connection Style
  • Boring Bar Shank (215)
Cutting Edges Per Insert
  • 1.0 (140)
  • 2.0 (87)
  • 3.0 (124)
  • 4.0 (6)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.051 (78)
  • 0.102 (15)
  • 0.127 (3)
  • 0.178 (183)
  • 0.18 (186)
  • 0.2 (10)
  • 0.202 (7)
  • 0.203 (8)
  • 0.38 (186)
  • 0.381 (140)
  • 0.397 (77)
  • 0.4 (14)
  • 0.787 (25)
  • 0.79 (25)
  • 0.794 (62)
  • 0.8 (7)
to
Corner Radius
  • 0.002 (78)
  • 0.004 (15)
  • 0.005 (3)
  • 0.007 (186)
  • 0.008 (18)
  • 0.015 (186)
  • 0.0156 (47)
  • 0.031 (59)
  • 0.0312 (62)
  • 0.0313 (7)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • ALO (137)
  • C2 (59)
  • C25 (149)
  • C3 (34)
  • CBN6 (34)
  • CG5 (207)
  • CG55 (11)
  • CG6 (186)
  • CM1 (207)
  • CPD1 (59)
  • TN7 (183)
  • WBH10C (3)
  • WBH10P (3)
  • WBH10U (3)
  • WBH25P (3)
  • WBH30P (3)
  • WDN00U (3)
  • WDN10U (34)
  • WDN25U (81)
  • WK20CT (152)
  • WM15CT (7)
  • WM25CT (7)
  • WP15CT (7)
  • WP25CT (14)
Hand Of Tool
  • L (47)
  • R (168)
Minimum Axial Groove Diameter
  • 0.18 (8)
  • 0.204 (8)
  • 0.208 (9)
  • 0.218 (4)
  • 0.224 (2)
  • 0.228 (8)
  • 0.234 (11)
  • 0.244 (1)
  • 0.26 (2)
  • 0.267 (1)
  • 0.275 (11)
  • 0.278 (3)
  • 0.279 (3)
  • 0.2791 (1)
  • 0.285 (17)
  • 0.292 (4)
  • 0.296 (16)
  • 0.347 (3)
  • 0.356 (6)
  • 0.358 (15)
  • 0.36 (1)
  • 0.394 (1)
  • 0.407 (1)
  • 0.413 (3)
  • 0.42 (2)
  • 0.438 (13)
  • 0.439 (1)
  • 0.481 (2)
  • 0.492 (1)
  • 0.508 (1)
  • 0.518 (1)
  • 0.525 (2)
  • 0.538 (3)
  • 0.545 (1)
  • 0.563 (10)
  • 0.605 (1)
  • 0.606 (1)
  • 0.645 (3)
  • 0.668 (3)
  • 0.67 (1)
  • 0.673 (2)
  • 0.679 (1)
  • 0.68 (3)
  • 0.688 (1)
  • 0.72 (7)
  • 0.75 (2)
  • 0.797 (2)
  • 0.85 (7)
  • 0.969 (3)
  • 1.1 (4)
to
Minimum Axial Groove Diameter
  • 4.57 (8)
  • 5.18 (7)
  • 5.182 (1)
  • 5.28 (9)
  • 5.54 (4)
  • 5.69 (2)
  • 5.78 (1)
  • 5.79 (6)
  • 5.791 (1)
  • 5.94 (11)
  • 6.2 (1)
  • 6.6 (2)
  • 6.78 (1)
  • 6.98 (10)
  • 7.06 (3)
  • 7.08 (2)
  • 7.09 (2)
  • 7.24 (17)
  • 7.42 (4)
  • 7.52 (16)
  • 8.81 (3)
  • 9.04 (6)
  • 9.09 (15)
  • 9.16 (1)
  • 9.98 (1)
  • 10.01 (1)
  • 10.34 (1)
  • 10.49 (1)
  • 10.5 (2)
  • 10.67 (1)
  • 10.68 (1)
  • 11.13 (13)
  • 11.15 (1)
  • 12.22 (2)
  • 12.5 (1)
  • 12.9 (1)
  • 13.16 (1)
  • 13.34 (2)
  • 13.67 (3)
  • 13.84 (1)
  • 14.3 (10)
  • 15.37 (1)
  • 15.39 (1)
  • 16.38 (3)
  • 16.967 (1)
  • 16.97 (2)
  • 17.02 (1)
  • 17.09 (2)
  • 17.25 (1)
  • 17.27 (3)
  • 17.48 (1)
  • 18.29 (7)
  • 19.05 (2)
  • 20.24 (2)
  • 21.59 (7)
  • 24.61 (3)
  • 27.94 (4)
to
Cutting Direction
  • B (138)
  • E (67)
  • P (7)
  • S (3)
Rake Angle Style
  • NEGATIVE-ZERO (19)
  • NEUTRAL (ZERO) (26)
  • POSITIVE-ZERO (170)
Maximum Bore Depth
  • 12.3 (1)
  • 12.7 (10)
  • 16.0 (2)
  • 19.048 (7)
  • 19.05 (7)
  • 20.0 (3)
  • 22.22 (3)
  • 22.225 (1)
  • 22.23 (1)
  • 23.76 (3)
  • 24.0 (4)
  • 25.4 (20)
  • 25.72 (1)
  • 28.56 (4)
  • 28.572 (9)
  • 28.578 (1)
  • 28.58 (3)
  • 30.0 (2)
  • 31.748 (5)
  • 31.75 (13)
  • 31.76 (1)
  • 32.0 (1)
  • 36.0 (5)
  • 38.04 (4)
  • 38.08 (4)
  • 38.1 (21)
  • 38.12 (3)
  • 40.0 (1)
  • 47.55 (1)
  • 47.58 (6)
  • 47.61 (1)
  • 47.62 (2)
  • 47.622 (4)
  • 48.0 (4)
  • 50.8 (10)
  • 57.12 (6)
  • 57.15 (2)
  • 63.48 (3)
  • 63.5 (4)
  • 63.52 (4)
  • 72.0 (1)
  • 76.2 (14)
  • 95.22 (6)
  • 96.0 (1)
  • 101.6 (1)
  • 114.24 (3)
  • 114.3 (1)
  • 152.4 (3)
to
Maximum Bore Depth
  • 0.484 (1)
  • 0.5 (10)
  • 0.628 (2)
  • 0.75 (14)
  • 0.788 (3)
  • 0.875 (5)
  • 0.936 (3)
  • 0.942 (1)
  • 0.9432 (1)
  • 0.944 (2)
  • 1.0 (20)
  • 1.012 (1)
  • 1.122 (2)
  • 1.125 (15)
  • 1.182 (2)
  • 1.25 (19)
  • 1.26 (1)
  • 1.416 (5)
  • 1.5 (32)
  • 1.5748 (1)
  • 1.872 (7)
  • 1.875 (7)
  • 1.888 (1)
  • 1.89 (3)
  • 2.0 (10)
  • 2.25 (8)
  • 2.5 (11)
  • 2.832 (1)
  • 3.0 (14)
  • 3.75 (6)
  • 3.78 (1)
  • 4.0 (1)
  • 4.5 (4)
  • 6.0 (3)
to
Boring Bar Material
  • C (97)
  • S (109)
Wiper Insert
  • N (211)
  • Y (3)
Front-End
Clamp Style
  • S (188)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (87)
  • T-TRIANGLE 60 (107)
  • THREADING (3)
  • W-TRIGON 80 (19)
Cutting Width
  • 0.762 (3)
  • 1.524 (3)
to
Cutting Width
  • 0.03 (3)
  • 0.06 (3)
to
Maximum Cutting Depth
  • 1.57 (1)
  • 1.91 (1)
  • 2.59 (1)
  • 3.17 (1)
  • 3.18 (4)
to
Maximum Cutting Depth
  • 0.062 (1)
  • 0.075 (1)
  • 0.102 (1)
  • 0.125 (5)
to
Insert Geometry
Cutting Tool Material
  • B H (3)
  • B L (37)
  • D P (140)
  • H T (183)
  • H W (208)
Back-End
Connection Type
  • BORING BAR (215)
Back-End Diameter
  • 0.156 (3)
  • 0.157 (3)
  • 0.187 (2)
  • 0.1875 (21)
  • 0.197 (5)
  • 0.2358 (1)
  • 0.236 (7)
  • 0.25 (17)
  • 0.312 (7)
  • 0.3125 (9)
  • 0.315 (4)
  • 0.375 (25)
  • 0.3937 (1)
  • 0.394 (2)
  • 0.472 (3)
  • 0.5 (52)
  • 0.625 (33)
  • 0.63 (2)
  • 0.75 (13)
  • 1.0 (7)
to
Back-End Diameter
  • 3.96 (3)
  • 4.0 (3)
  • 4.76 (4)
  • 4.762 (18)
  • 4.763 (1)
  • 5.0 (5)
  • 6.0 (8)
  • 6.34 (4)
  • 6.35 (13)
  • 7.925 (1)
  • 7.93 (6)
  • 7.937 (9)
  • 8.0 (4)
  • 9.52 (14)
  • 9.524 (1)
  • 9.525 (7)
  • 9.53 (3)
  • 10.0 (3)
  • 12.0 (3)
  • 12.7 (52)
  • 15.87 (27)
  • 15.875 (1)
  • 15.88 (5)
  • 16.0 (2)
  • 19.04 (3)
  • 19.05 (10)
  • 25.4 (7)
to
other
Platform
  • CCBI (34)
  • CCBM (10)
  • CSBI (26)
  • CSBM (10)
  • FCBI (24)
  • FCBM (3)
  • FSBI (18)
  • FSBM (1)
  • FSRI (2)
  • GCBIW (4)
  • GSBIW (3)
  • GSBMW (1)
  • QCBI (8)
  • QCBIW (4)
  • QCBM (1)
  • QCMI (3)
  • QSBI (16)
  • QSBIW (2)
  • QSBM (1)
  • QSBMW (1)
  • QSMI (4)
  • QSOI (3)
  • QSRI (6)
  • SCBI (8)
  • SCBIW (2)
  • SDBIC (2)
  • SDBM (1)
  • SSBI (13)
  • SSBIC (1)
  • SSBIW (2)
  • SSOI (3)
Tool Unit
  • I (188)
  • M (29)
Over All Length [L]
  • 60.32 (2)
  • 63.5 (25)
  • 69.85 (11)
  • 69.86 (1)
  • 70.0 (3)
  • 72.2 (1)
  • 76.2 (14)
  • 79.37 (1)
  • 85.72 (3)
  • 85.73 (1)
  • 88.9 (6)
  • 95.25 (10)
  • 100.33 (3)
  • 100.58 (2)
  • 101.51 (2)
  • 101.59 (1)
  • 101.6 (36)
  • 107.95 (5)
  • 114.3 (2)
  • 120.65 (2)
  • 126.91 (1)
  • 127.0 (9)
  • 152.0 (1)
  • 152.15 (2)
  • 152.4 (44)
  • 154.2 (1)
  • 177.8 (4)
  • 203.2 (9)
  • 254.0 (9)
  • 304.8 (1)
  • 304.81 (1)
to
Over All Length [L]
  • 2.375 (2)
  • 2.5 (25)
  • 2.75 (12)
  • 2.756 (2)
  • 2.757 (1)
  • 3.0 (15)
  • 3.125 (1)
  • 3.375 (4)
  • 3.5 (6)
  • 3.75 (10)
  • 3.95 (3)
  • 3.96 (2)
  • 3.997 (2)
  • 4.0 (37)
  • 4.25 (5)
  • 4.5 (2)
  • 4.75 (2)
  • 4.997 (1)
  • 5.0 (9)
  • 5.9843 (1)
  • 5.99 (2)
  • 6.0 (45)
  • 7.0 (4)
  • 8.0 (9)
  • 10.0 (9)
  • 12.0 (2)
to
Insert Hand
  • L (184)
  • N (208)
  • R (185)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Small Hole Boring Bars for Turning

Clamping System S • Steel
(4 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [KRA] Lead Angle ANSI [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [GAAP] Axial Rake Angle Gage Insert Insert Screw ID Drive Size
2830358 FSBI25045R FSBI25045R   WG -5.000 6.35 .25 7.5200 .2960 6.6000 .2600 3.9600 .1560 101.6000 4.000 1.0200 .0400 5.000 TD..130805 T7
    List price:
    $94.06 /each.
    Your price::
    Qty
    2830260 FSBI31245R FSBI31245R   WG -5.000 7.937 .3125 9.0900 .3580 8.1800 .3220 4.7500 .1870 101.6000 4.000 1.5200 .0600 5.000 TD..130805 T7
      List price:
      $94.06 /each.
      Your price::
      Qty
      2830455 FSBI187355R FSBI187355R   WG -5.000 4.762 .1875 6.9800 .2750 5.0000 .1970 3.1200 .1230 88.9000 3.500 1.0200 .0400 5.000 TD..130805 T7
        List price:
        $94.06 /each.
        Your price::
        Qty
        2830270 FSBI31245L FSBI31245L   WG -5.000 7.937 .3125 9.0900 .3580 8.1800 .3220 4.7500 .1870 101.6000 4.000 1.5200 .0600 5.000 TD..130805 T7
          List price:
          $94.06 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          Small Hole Boring Bars for Turning

          Clamping System S • Steel
          (13 Products)
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [KRA] Lead Angle ANSI [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [GAAP] Axial Rake Angle Gage Insert Insert Screw ID Drive Size
          2822898 SSBI75085R SSBI75085R   WG -5.000 19.05 .75 21.5900 .8500 19.3000 .7600 11.6800 .4600 203.2000 8.000 3.9600 .1560 5.000 TP..3205 T10
            List price:
            $119.69 /each.
            Your price::
            Qty
            2822947 SSBI62575R SSBI62575R   WG -5.000 15.87 .625 18.2900 .7200 16.1300 .6350 9.9800 .3930 177.8000 7.000 3.9600 .1560 5.000 TP..3205 T10
              List price:
              $110.03 /each.
              Your price::
              Qty
              2823121 SSBI1000105R SSBI1000105R   WG -5.000 25.4 1.0 27.9400 1.100 25.6500 1.010 14.8600 .5850 254.0000 10.000 6.3500 .2500 5.000 TP..3205 T10
                List price:
                $170.84 /each.
                Your price::
                Qty
                2822901 SSBI75085L SSBI75085L   WG -5.000 19.05 .75 21.5900 .8500 19.3000 .7600 11.6800 .4600 203.2000 8.000 3.9600 .1560 5.000 TP..3205 T10
                  List price:
                  $119.69 /each.
                  Your price::
                  Qty
                  2822921 SSBI75045R