COVID-19: How WIDIA is responding

Positive Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (197)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (152)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (152)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (197)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (197)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (197)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (152)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (150)
  • M Stainless Steel (192)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (192)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (192)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (192)
  • K Cast Iron (167)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (156)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (167)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (154)
  • N Non-Ferrous Materials (170)
    • N1
      Wrought Aluminum
      (164)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (164)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (79)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2)
    • N6
      Carbon, Graphite Composites, CFRP
      (2)
    • N7
      MMC's
      (6)
  • S High-Temp Alloys (4)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (4)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (4)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (4)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (4)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC
      (9)
    • H2
      Hardened Materials 48-55 HRC
      (9)
    • H3
      Hardened Materials 56-60 HRC
      (9)
    • H4
      Hardened Materials >60 HRC
      (9)
Select First Choice
  • US (2)
Applications
  • Grooving Grooving (5)
  • ID Thread Turning ID Thread Turning (243)
  • OD Thread Turning OD Thread Turning (3)
Cutting Condition
  • Lightly Interrupted Cut (1)
  • Smooth Cut (7)
  • Varying Depth of Cut (7)
Cutting Edges Per Insert
  • 0.0 (1)
  • 1.0 (20)
  • 2.0 (69)
  • 3.0 (160)
  • 4.0 (9)
to
Corner configuration
Corner Radius
  • 0.05 (13)
  • 0.051 (16)
  • 0.1 (3)
  • 0.102 (4)
  • 0.127 (4)
  • 0.178 (23)
  • 0.18 (49)
  • 0.2 (6)
  • 0.202 (1)
  • 0.203 (2)
  • 0.38 (37)
  • 0.381 (27)
  • 0.397 (11)
  • 0.4 (13)
  • 0.53 (1)
  • 0.787 (8)
  • 0.79 (8)
  • 0.794 (15)
  • 0.8 (2)
  • 0.94 (2)
  • 1.6 (1)
to
Corner Radius
  • 0.002 (29)
  • 0.004 (7)
  • 0.005 (4)
  • 0.007 (72)
  • 0.008 (9)
  • 0.015 (66)
  • 0.0156 (22)
  • 0.021 (1)
  • 0.031 (19)
  • 0.0312 (11)
  • 0.0313 (3)
  • 0.037 (2)
  • 0.063 (1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Lightly Interrupted Cut (1)
  • Smooth Cut (7)
  • Varying Depth of Cut (7)
Grade Of Cutting Tool
  • ALO (2)
  • C2 (4)
  • C25 (11)
  • C3 (4)
  • CBN6 (9)
  • CG5 (81)
  • CG55 (4)
  • CG6 (45)
  • CM1 (62)
  • CPD1 (6)
  • TN7 (22)
  • WDN10U (2)
  • WDN15U (3)
  • WK20CT (3)
Wiper Insert
  • N (258)
Front-End
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (47)
  • G-RHOMBIC 45 (19)
  • GROOVING/CUTOFF MISC (12)
  • T-TRIANGLE 60 (159)
  • THREADING (6)
  • W-TRIGON 80 (16)
Cutting Width
  • 0.381 (1)
  • 0.635 (2)
  • 0.762 (5)
  • 1.524 (4)
to
Cutting Width
  • 0.015 (1)
  • 0.025 (2)
  • 0.03 (5)
  • 0.06 (4)
to
Thread TPI
  • 24.0 (4)
  • 48.0 (2)
to
Thread TPI
  • 24.0 (4)
  • 48.0 (2)
to
Thread Pitch
  • 1.0 (2)
  • 2.5 (4)
to
Thread Pitch
  • 1.0 (2)
  • 2.5 (4)
to
Insert Geometry
Shape
  • C-DIAMOND/RHOMBIC 80 (47)
  • G-RHOMBIC 45 (19)
  • GROOVING/CUTOFF MISC (12)
  • T-TRIANGLE 60 (159)
  • THREADING (6)
  • W-TRIGON 80 (16)
Insert IC Size
  • 0.1562 (27)
  • 0.1563 (22)
  • 0.16 (45)
  • 0.1605 (2)
  • 0.1875 (15)
  • 0.1902 (1)
  • 0.25 (81)
  • 0.256 (1)
  • 0.375 (61)
  • 0.386 (3)
to
Insert IC Size
  • 3.967 (13)
  • 3.969 (36)
  • 4.064 (45)
  • 4.076 (2)
  • 4.76 (1)
  • 4.762 (8)
  • 4.763 (6)
  • 4.831 (1)
  • 6.35 (81)
  • 6.5 (1)
  • 9.525 (61)
  • 9.804 (3)
to
Cutting Edge Length
  • 0.128 (7)
  • 0.1587 (15)
  • 0.159 (18)
  • 0.161 (1)
  • 0.171 (7)
  • 0.221 (6)
  • 0.227 (4)
  • 0.2539 (2)
  • 0.254 (6)
  • 0.2565 (2)
  • 0.265 (6)
  • 0.269 (3)
  • 0.277 (44)
  • 0.283 (1)
  • 0.3808 (4)
  • 0.433 (47)
  • 0.4331 (8)
  • 0.443 (1)
  • 0.6496 (27)
  • 0.65 (27)
  • 0.669 (3)
to
Cutting Edge Length
  • 3.25 (1)
  • 3.26 (6)
  • 4.03 (33)
  • 4.1 (1)
  • 4.344 (7)
  • 5.61 (6)
  • 5.76 (4)
  • 6.448 (2)
  • 6.45 (6)
  • 6.515 (2)
  • 6.73 (6)
  • 6.83 (3)
  • 7.036 (9)
  • 7.04 (35)
  • 7.18 (1)
  • 9.672 (4)
  • 11.0 (55)
  • 11.26 (1)
  • 16.5 (54)
  • 16.98 (3)
to
Cutting Tool Material
  • B L (9)
  • D P (11)
  • H T (22)
  • H W (197)
Chip Breaker CBMD
  • HP (6)
  • LF (21)
  • UF (1)
Tolerance Class
  • C (2)
  • G (7)
  • H (211)
  • M (16)
other
Grade
  • ALO (2)
  • C2 (4)
  • C25 (11)
  • C3 (4)
  • CBN6 (9)
  • CG5 (81)
  • CG55 (4)
  • CG6 (45)
  • CM1 (62)
  • CPD1 (6)
  • TN7 (22)
  • WDN10U (2)
  • WDN15U (3)
  • WK20CT (3)
Platform
  • CDG (2)
  • CDHB (19)
  • CDHH (10)
  • CDT (1)
  • CPG (2)
  • CPHB (2)
  • CPHH (5)
  • CPMT (3)
  • CPT (2)
  • GCHT (3)
  • GCHW (4)
  • GPHT (4)
  • GPHW (6)
  • TBHB (2)
  • TDHB (18)
  • TDHH (11)
  • TPGT (4)
  • TPHB (37)
  • TPHH (23)
  • TPMT (6)
  • WPHT (8)
  • WPMT (4)
Tool Unit
  • I (259)
  • M (259)
Insert Hand
  • L (39)
  • N (191)
  • R (28)
obsoleteFacet
  • true (259)
  • false (172)
Drilling Condition Material
  • K-All (6)
  • M-All (1)
  • N-All (6)
  • P-All (1)
Cutting Condition Material
  • K-All (6)
  • M-All (1)
  • N-All (6)
  • P-All (1)
No filters matching ""
View Products in
Metric
Inch
Specialty Turning • Small Hole Boring • Positive Inserts

CDHB
(21 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
2830870 CDHBS4T002 CDHB120605   WK20CT 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
    2830843 CDHBS4T002 CDHB120605   TN7 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
      2830848 CDHBS4T002 CDHB120605   CM1 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
        2830853 CDHBS4T002 CDHB120605   CG6 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
          2830864 CDHBS4T002 CDHB120605   C25 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
            3884732 CDHBS4T002 CDHB120605   CG5 3.9690 .1563 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              Specialty Turning • Small Hole Boring • Positive Inserts

              TDHB
              (27 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
              2828763 TDHB07S102 TDHB130805   WK20CT 4.0640 .1600 7.0400 .2770 1.1910 .0469 0.1800 .0070 2.4100 .0950
                2828720 TDHB07S102 TDHB130805   TN7 4.0640 .1600 7.0400 .2770 1.1910 .0469 0.1800 .0070 2.4100 .0950
                  2828727 TDHB07S102 TDHB130805   CM1 4.0640 .1600 7.0400 .2770 1.1910 .0469 0.1800 .0070 2.4100 .0950
                    2828732 TDHB07S102 TDHB130805   C25 4.0640 .1600 7.0400 .2770 1.1910 .0469 0.1800 .0070 2.4100 .0950
                      2828749 TDHB07S102 TDHB130805   CG6 4.0640 .1600 7.0400 .2770 1.1910 .0469 0.1800 .0070 2.4100 .0950
                        2828755 TDHB07S102 TDHB130805   CG5 4.0640 .1600 7.0400 .2770 1.1910 .0469 0.1800 .0070 2.4100 .0950
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          Small Hole Boring Positive Inserts

                          (6 Products)
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                          1393070 40072636012 40072636012                      
                            2824454 CPHH06T102 CPHH21205 CG6 6.3500 .2500 6.4500 .2540 1.9050 .0750 0.1800 .0070 2.7900 .1100
                              2824461 CPHH06T102 CPHH21205 CG5 6.3500 .2500 6.4500 .2540 1.9050 .0750 0.1800 .0070 2.7900 .1100
                                2824468 CPHH06T102 CPHH21205 CM1 6.3500 .2500 6.4500 .2540 1.9050 .0750 0.1800 .0070 2.7900 .1100
                                  2824433 CPHH06T104 CPHH2121 CG6 6.3500 .2500 6.4480 .2539 1.9050 .0750 0.3810 .0150 2.8000 .1100
                                    2824441 CPHH06T104 CPHH2121 CG5 6.3500 .2500 6.4480 .2539 1.9050 .0750 0.3810 .0150 2.8000 .1100
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      Small Hole Boring Positive Inserts

                                      (5 Products)
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [T] Cuttg Depth [T] Cutting Depth [W] Cutting Width [W] Cutting Width [D1] Insert Hole Size [D1] Insert Hole Size
                                      2830561 CDG50152R CDG50152R CM1 3.9670 .1562 1.2700 .0500 0.5080 .0200 0.3810 .0150 2.1340 .0840
                                        2830541 CDG50252R CDG50252R CG5 3.9670 .1562 1.2700 .0500 1.0160 .0400 0.6350 .0250 2.1340 .0840
                                          2830548 CDG50252R CDG50252R CM1 3.9670 .1562 1.2700 .0500 1.0160 .0400 0.6350 .0250 2.1340 .0840
                                            2830529 CDG50302R CDG50302R CG5 3.9670 .1562 1.2700 .0500 1.0160 .0400 0.7620 .0300 2.1340 .0840
                                              2830535 CDG50302R CDG50302R CM1 3.9670 .1562 1.2700 .0500 1.0160 .0400 0.7620 .0300 2.1340 .0840
                                                List price:
                                                Discount: %
                                                Your price::
                                                Replacement This item is not available
                                                Replacement Product This item may be available through a distributor
                                                Qty
                                                Small Hole Boring Positive Inserts

                                                (13 Products)
                                                View Products
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                                                2830638 CDHHS4T002 CDHH120605 CM1 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.1780 .0070 2.1340 .0840
                                                  2830632 CDHHS4T002 CDHH120605 CG5 3.9690 .1563 4.0300 .1587 1.0200 .0400 0.1780 .0070 2.1340 .0840
                                                    2830688 CDHHS4T002L CDHH120605L TN7 3.9690 .1562 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                                                      2830700 CDHHS4T002L CDHH120605L CM1 3.9690 .1562 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                                                        2830712 CDHHS4T002L CDHH120605L CG6 3.9690 .1562 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                                                          2830724 CDHHS4T002L CDHH120605L CG5 3.9690 .1562 4.0300 .1590 1.0200 .0400 0.1800 .0070 2.1300 .0840
                                                            List price:
                                                            Discount: %
                                                            Your price::
                                                            Replacement This item is not available
                                                            Replacement Product This item may be available through a distributor
                                                            Qty
                                                            Small Hole Boring Positive Inserts

                                                            (2 Products)
                                                            View Products
                                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [T] Cuttg Depth [T] Cutting Depth [RC] Corner Radius Center [RC] Corner Radius Center [D1] Insert Hole Size [D1] Insert Hole Size Thread Pitch Mimum Thread Pitch Maximum
                                                            2830567 CDT50022R CDT50022R CG5 3.9690 .1562 1.2700 .0500 0.7600 .0300 0.0500 .0020 2.1100 .0830 0.5000 1.0000
                                                              2830572 CDT50022R CDT50022R CM1 3.9690 .1562 1.2700 .0500 0.7600 .0300 0.0500 .0020 2.1100 .0830 0.5000 1.0000
                                                                List price:
                                                                Discount: %
                                                                Your price::
                                                                Replacement This item is not available
                                                                Replacement Product This item may be available through a distributor
                                                                Qty
                                                                Small Hole Boring Positive Inserts

                                                                (7 Products)
                                                                View Products
                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [T] Cuttg Depth [T] Cutting Depth [W] Cutting Width [W] Cutting Width [D1] Insert Hole Size [D1] Insert Hole Size
                                                                2824508 CPG2032L CPG2032L CM1 6.3500 .2500 1.9050 .0750 1.6510 .0650 0.7620 .0300 2.7940 .1100
                                                                  2824546 CPG2032R CPG2032R CG5 6.3500 .2500 1.9050 .0750 1.6510 .0650 0.7620 .0300 2.7940 .1100
                                                                    2824552 CPG2032R CPG2032R CM1 6.3500 .2500 1.9050 .0750 1.6510 .0650 0.7620 .0300 2.7940 .1100
                                                                      2824488 CPG2062L CPG2062L CG5 6.3500 .2500 1.9050 .0750 1.6510 .0650 1.5240 .0600 2.7940 .1100
                                                                        2824495 CPG2062L CPG2062L CM1 6.3500 .2500 1.9050 .0750 1.6510 .0650 1.5240 .0600 2.7940 .1100
                                                                          2824531 CPG2062R CPG2062R CG5 6.3500 .2500 1.9050 .0750 1.6510 .0650 1.5240 .0600 2.7940 .1100
                                                                            List price:
                                                                            Discount: %
                                                                            Your price::
                                                                            Replacement This item is not available
                                                                            Replacement Product This item may be available through a distributor
                                                                            Qty
                                                                            Small Hole Boring Positive Inserts

                                                                            (3 Products)
                                                                            View Products
                                                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                                                                            2824583 CPHB06T102 CPHB21205 CG5 6.3500 .2500 6.4500 .2540 1.9000 .0750 0.1800 .0070 2.7900 .1100
                                                                              2824590 CPHB06T102 CPHB21205 CM1 6.3500 .2500 6.4500 .2540 1.9000 .0750 0.1800 .0070 2.7900 .1100
                                                                                2824562 CPHB06T104 CPHB2121 CG5 6.3500 .2500 6.4500 .2540 1.9000 .0750 0.3800 .0150 2.7900 .1100
                                                                                  List price:
                                                                                  Discount: %
                                                                                  Your price::
                                                                                  Replacement This item is not available
                                                                                  Replacement Product This item may be available through a distributor
                                                                                  Qty
                                                                                  Small Hole Boring Positive Inserts

                                                                                  (4 Products)
                                                                                  View Products
                                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                                                                                  2821519 CPMT09T302LF CPMT32505LF CG5 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.2000 .0080 4.4000 .1732
                                                                                    2821494 CPMT09T304LF CPMT3251LF CM1 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.4000 .0156 4.4000 .1732
                                                                                      2821499 CPMT09T304LF CPMT3251LF CG5 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.4000 .0156 4.4000 .1732
                                                                                        2821484 CPMT09T308LF CPMT3252LF CG5 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.8000 .0312 4.4000 .1732
                                                                                          List price:
                                                                                          Discount: %
                                                                                          Your price::
                                                                                          Replacement This item is not available
                                                                                          Replacement Product This item may be available through a distributor
                                                                                          Qty
                                                                                          Small Hole Boring Positive Inserts

                                                                                          (4 Products)
                                                                                          View Products
                                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [T] Cuttg Depth [T] Cutting Depth [RC] Corner Radius Center [RC] Corner Radius Center [D1] Insert Hole Size [D1] Insert Hole Size TPI Minimum TPI Maximum Thread Pitch Mimum Thread Pitch Maximum
                                                                                          2824474 CPT20052L CPT20052L CG5 6.3500 .2500 1.9050 .0750 1.6510 .0650 0.1270 .0050 2.7940 .1100 10.000 24.000 1.0000 2.5000
                                                                                            2824481 CPT20052L CPT20052L CM1 6.3500 .2500 1.9050 .0750 1.6510 .0650 0.1270 .0050 2.7940 .1100 10.000 24.000 1.0000 2.5000
                                                                                              2824516 CPT20052R CPT20052R CG5 6.3500 .2500 1.9050 .0750 1.6510 .0650 0.1270 .0050 2.7940 .1100 10.000 24.000 1.0000 2.5000
                                                                                                2824523 CPT20052R CPT20052R CM1 6.3500 .2500 1.9050 .0750 1.6510 .0650 0.1270 .0050 2.7940 .1100 10.000 24.000 1.0000 2.5000
                                                                                                  List price:
                                                                                                  Discount: %
                                                                                                  Your price::
                                                                                                  Replacement This item is not available
                                                                                                  Replacement Product This item may be available through a distributor
                                                                                                  Qty
                                                                                                  Small Hole Boring Positive Inserts

                                                                                                  (3 Products)
                                                                                                  View Products
                                                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                                                                                                  2827537 GCHT060202 GCHT151505 CG5 4.8310 .1902 6.8300 .2690 2.3600 .0930 0.1800 .0070 2.3900 .0940
                                                                                                    2827525 GCHT060204 GCHT15151 CG5 4.7620 .1875 6.8300 .2690 2.3600 .0930 0.3800 .0150 2.3900 .0940
                                                                                                      2827531 GCHT060204 GCHT15151 CM1 4.7620 .1875 6.8300 .2690 2.3600 .0930 0.3800 .0150 2.3900 .0940
                                                                                                        List price:
                                                                                                        Discount: %
                                                                                                        Your price::
                                                                                                        Replacement This item is not available
                                                                                                        Replacement Product This item may be available through a distributor
                                                                                                        Qty
                                                                                                        Small Hole Boring Positive Inserts

                                                                                                        (6 Products)
                                                                                                        View Products
                                                                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                                                                                                        2827589 GCHW060202 GCHW151505 CG6 4.7630 .1875 6.7300 .2650 2.3620 .0930 0.1780 .0070 2.3880 .0940
                                                                                                          2827596 GCHW060202 GCHW151505 CG5 4.7630 .1875 6.7300 .2650 2.3620 .0930 0.1780 .0070 2.3880 .0940
                                                                                                            2827601 GCHW060202 GCHW151505 CM1 4.7630 .1875 6.7300 .2650 2.3620 .0930 0.1780 .0070 2.3880 .0940
                                                                                                              2827570 GCHW060204 GCHW15151 CG6 4.7630 .1875 6.7300 .2650 2.3620 .0930 0.3810 .0150 2.3880 .0940
                                                                                                                2827577 GCHW060204 GCHW15151 CG5 4.7630 .1875 6.7300 .2650 2.3620 .0930 0.3810 .0150 2.3880 .0940
                                                                                                                  2827584 GCHW060204 GCHW15151 CM1 4.7630 .1875 6.7300 .2650 2.3620 .0930 0.3810 .0150 2.3880 .0940
                                                                                                                    List price:
                                                                                                                    Discount: %
                                                                                                                    Your price::
                                                                                                                    Replacement This item is not available
                                                                                                                    Replacement Product This item may be available through a distributor
                                                                                                                    Qty
                                                                                                                    Small Hole Boring Positive Inserts

                                                                                                                    (4 Products)
                                                                                                                    View Products
                                                                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                                                                                                                    2827560 GPHT050102 GPHT12105 CG5 3.9670 .1562 5.7600 .2270 1.5700 .0620 0.1800 .0070 2.1300 .0840
                                                                                                                      2827566 GPHT050102 GPHT12105 CM1 3.9670 .1562 5.7600 .2270 1.5700 .0620 0.1800 .0070 2.1300 .0840
                                                                                                                        2827548 GPHT050104 GPHT1211 CG5 4.0760 .1605 5.7600 .2270 1.5700 .0620 0.3800 .0150 2.1300 .0840
                                                                                                                          2827554 GPHT050104 GPHT1211 CM1 4.0760 .1605 5.7600 .2270 1.5700 .0620 0.3800 .0150 2.1300 .0840
                                                                                                                            List price:
                                                                                                                            Discount: %
                                                                                                                            Your price::
                                                                                                                            Replacement This item is not available
                                                                                                                            Replacement Product This item may be available through a distributor
                                                                                                                            Qty
                                                                                                                            Small Hole Boring Positive Inserts

                                                                                                                            (6 Products)
                                                                                                                            View Products
                                                                                                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                                                                                                                            2827625 GPHW050102 GPHW12105 CG6 3.9670 .1562 5.6100 .2210 1.5900 .0620 0.1800 .0070 2.1300 .0840
                                                                                                                              2827631 GPHW050102 GPHW12105 CG5 3.9670 .1562 5.6100 .2210 1.5900 .0620 0.1800 .0070 2.1300 .0840
                                                                                                                                2827637 GPHW050102 GPHW12105 CM1 3.9670 .1562 5.6100 .2210 1.5900 .0620 0.1800 .0070 2.1300 .0840
                                                                                                                                  2827608 GPHW050104 GPHW1211 CG6 3.9670 .1562 5.6100 .2210 1.5900 .0620 0.3800 .0150 2.1300 .0840
                                                                                                                                    2827615 GPHW050104 GPHW1211 CG5 3.9670 .1562 5.6100 .2210 1.5900 .0620 0.3800 .0150 2.1300 .0840
                                                                                                                                      2827621 GPHW050104 GPHW1211 CM1 3.9670 .1562 5.6100 .2210 1.5900 .0620 0.3800 .0150 2.1300 .0840
                                                                                                                                        List price:
                                                                                                                                        Discount: %
                                                                                                                                        Your price::
                                                                                                                                        Replacement This item is not available
                                                                                                                                        Replacement Product This item may be available through a distributor
                                                                                                                                        Qty
                                                                                                                                        Small Hole Boring Positive Inserts

                                                                                                                                        (8 Products)
                                                                                                                                        View Products
                                                                                                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size Thread Pitch Minimum Thread Pitch Maximum
                                                                                                                                        2828556 TBHB07S1X0 TBHB1308X0 CG5 4.0640 .1600 7.0400 .2770 1.1900 .0470 0.0500 .0020 2.3900 .0940 0.5000 1.3000
                                                                                                                                          2828641 TBHB07S1X0 TBHB1308X0 C25 4.0640 .1600 7.0400 .2770 1.1900 .0470 0.0500 .0020 2.3900 .0940 0.5000 1.3000
                                                                                                                                            2828648 TBHB07S1X0 TBHB1308X0 CM1 4.0640 .1600 7.0400 .2770 1.1900 .0470 0.0500 .0020 2.3900 .0940 0.5000 1.3000
                                                                                                                                              2828652 TBHB07S1X0 TBHB1308X0 CG6 4.0640 .1600 7.0400 .2770 1.1900 .0470 0.0500 .0020 2.3900 .0940 0.5000 1.3000
                                                                                                                                                2824266 TBHB110201 TBHB2150 CG5 6.3500 .2500 11.0000 .4330 2.3810 .0938 0.1000 .0040 3.3300 .1310 0.8000 2.5000
                                                                                                                                                  2824302 TBHB110201 TBHB2150 C25 6.3500 .2500 11.0000 .4330 2.3810 .0938 0.1000 .0040 3.3300 .1310 0.8000 2.5000
                                                                                                                                                    List price:
                                                                                                                                                    Discount: %
                                                                                                                                                    Your price::
                                                                                                                                                    Replacement This item is not available
                                                                                                                                                    Replacement Product This item may be available through a distributor
                                                                                                                                                    Qty
                                                                                                                                                    Small Hole Boring Positive Inserts

                                                                                                                                                    (47 Products)
                                                                                                                                                    View Products
                                                                                                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
                                                                                                                                                    2821822 TPCB160302 TD6P05 CG6 9.5250 .3750     3.2300 .1270 0.1780 .0070 3.3000 .1300
                                                                                                                                                      2824148 TPHB110202 TPHB21505 TN7 6.3500 .2500 11.0000 .4330 2.3830 .0938 0.1780 .0070 3.3020 .1300
                                                                                                                                                        2824168 TPHB110202 TPHB21505 CM1 6.3500 .2500 11.0000 .4330 2.3830 .0938 0.1780 .0070 3.3020 .1300
                                                                                                                                                          2824191 TPHB110202 TPHB21505 C3 6.3500 .2500 11.0000 .4330 2.3830 .0938 0.1780 .0070 3.3020 .1300
                                                                                                                                                            2824195