COVID-19: How WIDIA is responding

Toolholders

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (140)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (140)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (140)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (140)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (140)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (140)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (140)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (140)
  • M Stainless Steel (140)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (140)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (140)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (140)
  • K Cast Iron (140)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (140)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (140)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (140)
  • N Non-Ferrous Materials (140)
    • N1
      Wrought Aluminum
      (140)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (140)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (140)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (93)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (140)
    • N6
      Carbon, Graphite Composites, CFRP
      (140)
    • N7
      MMC's
      (93)
  • S High-Temp Alloys (140)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (140)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (140)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (140)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (140)
  • H Hardened Materials (58)
    • H1
      Hardened Materials 44-48 HRC
      (58)
    • H2
      Hardened Materials 48-55 HRC
      (58)
Select First Choice
  • IN (1)
Applications
  • Cut-Off Cut-Off (139)
  • Deep Grooving Deep Grooving (139)
  • Face Grooving Face Grooving (139)
  • Grooving Grooving (139)
  • ID Facing ID Facing (139)
  • ID Grooving ID Grooving (139)
  • ID Thread Turning ID Thread Turning (139)
  • Multiple Direction Cutting Multiple Direction Cutting (140)
  • OD Thread Turning OD Thread Turning (141)
  • Profiling Profiling (139)
  • TRN Boring TRN Boring (139)
  • Threading Threading (139)
  • Turning Turning (139)
Type of Thread
  • 60 (129)
  • ACME (92)
  • API RD (49)
  • BSW (26)
  • BUTTRESS (23)
  • STUB ACME (49)
  • UN (111)
  • UNJ (26)
Cutting Condition
  • Heavily Interrupted Cut (133)
  • Lightly Interrupted Cut (133)
  • Smooth Cut (133)
  • Varying Depth of Cut (133)
Tool Cutting Edge Angle
  • 90.0 (144)
to
Connection Style
  • Toolholder (98)
Cutting Edges Per Insert
  • 1.0 (129)
  • 2.0 (140)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.076 (71)
  • 0.089 (44)
  • 0.09 (70)
  • 0.1 (44)
  • 0.102 (67)
  • 0.16 (18)
  • 0.165 (85)
  • 0.18 (22)
  • 0.185 (22)
  • 0.19 (129)
  • 0.191 (129)
  • 0.198 (26)
  • 0.2 (49)
  • 0.224 (26)
  • 0.235 (26)
  • 0.254 (26)
  • 0.3 (26)
  • 0.315 (67)
  • 0.318 (71)
  • 0.33 (26)
  • 0.34 (26)
  • 0.343 (26)
  • 0.356 (23)
  • 0.43 (49)
  • 0.5 (44)
  • 0.565 (18)
  • 0.57 (23)
  • 0.572 (85)
  • 0.575 (62)
  • 0.75 (44)
  • 0.787 (93)
  • 1.0 (93)
  • 1.194 (93)
  • 1.195 (23)
  • 1.25 (93)
  • 1.5 (93)
  • 1.585 (49)
  • 1.588 (85)
  • 1.59 (18)
  • 1.75 (93)
  • 1.98 (23)
  • 1.981 (26)
  • 2.0 (85)
  • 2.25 (85)
  • 2.388 (85)
  • 2.5 (36)
  • 3.175 (36)
  • 3.18 (18)
to
Corner Radius
  • 0.003 (71)
  • 0.0035 (70)
  • 0.004 (67)
  • 0.0065 (85)
  • 0.0075 (129)
  • 0.0078 (26)
  • 0.008 (49)
  • 0.0088 (26)
  • 0.0093 (26)
  • 0.01 (26)
  • 0.0118 (26)
  • 0.0125 (89)
  • 0.013 (26)
  • 0.0135 (26)
  • 0.014 (23)
  • 0.017 (49)
  • 0.0197 (44)
  • 0.0225 (85)
  • 0.0295 (44)
  • 0.031 (93)
  • 0.0394 (93)
  • 0.047 (93)
  • 0.0492 (93)
  • 0.0591 (93)
  • 0.0625 (85)
  • 0.0689 (93)
  • 0.078 (49)
  • 0.0787 (85)
  • 0.0886 (85)
  • 0.094 (85)
  • 0.0984 (36)
  • 0.125 (36)
to
Application
Grade Of Cutting Tool
  • THM (93)
  • TN10P (89)
  • TN6010 (129)
  • TN6025 (140)
  • TN7110 (129)
  • WU10HT (26)
  • WU10PT (58)
  • WU25PT (23)
Hand Of Tool
  • L (46)
  • R (52)
Wiper Insert
  • N (140)
Minimum Axial Groove Diameter
  • 0.0 (86)
  • 1.626 (42)
  • 1.874 (42)
  • 2.2 (4)
  • 2.252 (29)
  • 2.375 (2)
  • 2.5 (4)
  • 3.0 (2)
  • 3.5 (46)
  • 5.5 (42)
  • 6.874 (42)
  • 8.252 (29)
  • 8.752 (29)
  • 13.11 (4)
to
Minimum Axial Groove Diameter
  • 0.0 (86)
  • 41.3 (42)
  • 47.6 (42)
  • 55.88 (4)
  • 57.2 (29)
  • 60.325 (2)
  • 63.5 (4)
  • 76.2 (2)
  • 88.9 (46)
  • 139.7 (42)
  • 174.6 (42)
  • 209.6 (29)
  • 222.3 (29)
  • 333.0 (4)
to
Maximum Axial Groove Diameter
  • 9999.0 (133)
to
Maximum Axial Groove Diameter
  • 393.661 (133)
to
Cutting Direction
  • E (98)
Rake Angle Style
  • NEUTRAL (ZERO) (98)
Maximum Bore Depth
  • 12.7 (2)
  • 25.4 (9)
  • 50.8 (33)
  • 63.5 (2)
to
Maximum Bore Depth
  • 0.5 (2)
  • 1.0 (9)
  • 2.0 (33)
  • 2.5 (2)
to
Front-End
Clamp Style
  • N (144)
Insert Shape
  • TN-TOP NOTCH (144)
Cutting Width
  • 0.5 (44)
  • 0.787 (44)
  • 0.8 (44)
  • 1.0 (93)
  • 1.041 (22)
  • 1.19 (45)
  • 1.194 (71)
  • 1.2 (93)
  • 1.4 (44)
  • 1.473 (44)
  • 1.5 (93)
  • 1.56 (22)
  • 1.57 (71)
  • 1.575 (93)
  • 1.7 (44)
  • 1.75 (93)
  • 1.829 (49)
  • 1.95 (44)
  • 1.981 (49)
  • 2.0 (93)
  • 2.2 (93)
  • 2.24 (26)
  • 2.25 (67)
  • 2.388 (93)
  • 2.39 (23)
  • 2.5 (93)
  • 2.75 (93)
  • 3.0 (129)
  • 3.17 (49)
  • 3.175 (129)
  • 3.18 (18)
  • 3.2 (49)
  • 3.245 (44)
  • 3.25 (49)
  • 3.5 (129)
  • 3.73 (22)
  • 3.84 (44)
  • 3.96 (23)
  • 3.962 (49)
  • 3.974 (26)
  • 4.0 (85)
  • 4.24 (23)
  • 4.25 (26)
  • 4.5 (85)
  • 4.775 (49)
  • 4.785 (18)
  • 4.788 (18)
  • 4.8 (49)
  • 4.801 (85)
  • 4.88 (26)
  • 4.95 (49)
  • 5.0 (36)
  • 5.004 (4)
  • 5.5 (36)
  • 6.0 (36)
  • 6.35 (36)
  • 6.36 (18)
to
Cutting Width
  • 0.0197 (44)
  • 0.031 (44)
  • 0.0315 (44)
  • 0.0394 (93)
  • 0.041 (22)
  • 0.047 (93)
  • 0.0472 (93)
  • 0.0551 (44)
  • 0.058 (44)
  • 0.0591 (93)
  • 0.062 (93)
  • 0.0669 (44)
  • 0.0689 (93)
  • 0.072 (49)
  • 0.0768 (44)
  • 0.078 (49)
  • 0.0787 (93)
  • 0.0866 (93)
  • 0.088 (26)
  • 0.0886 (67)
  • 0.094 (93)
  • 0.0984 (93)
  • 0.1083 (93)
  • 0.1181 (129)
  • 0.125 (129)
  • 0.126 (49)
  • 0.1278 (44)
  • 0.128 (49)
  • 0.1378 (129)
  • 0.147 (22)
  • 0.151 (44)
  • 0.156 (49)
  • 0.1574 (85)
  • 0.1575 (85)
  • 0.167 (23)
  • 0.1673 (26)
  • 0.1771 (85)
  • 0.1772 (85)
  • 0.188 (85)
  • 0.189 (85)
  • 0.192 (26)
  • 0.195 (49)
  • 0.1969 (36)
  • 0.197 (4)
  • 0.2165 (36)
  • 0.2166 (18)
  • 0.2362 (36)
  • 0.25 (36)
to
Maximum Cutting Depth
  • 3.505 (24)
  • 3.51 (20)
  • 3.81 (2)
  • 5.33 (12)
  • 5.334 (35)
  • 5.715 (1)
  • 6.35 (2)
  • 7.468 (24)
  • 7.47 (10)
  • 7.62 (2)
  • 8.484 (5)
  • 10.54 (2)
  • 10.541 (5)
to
Maximum Cutting Depth
  • 0.138 (28)
  • 0.1382 (16)
  • 0.15 (2)
  • 0.2098 (12)
  • 0.21 (35)
  • 0.225 (1)
  • 0.25 (2)
  • 0.294 (24)
  • 0.2941 (10)
  • 0.3 (2)
  • 0.334 (5)
  • 0.415 (7)
to
Insert Size
  • 1 (3)
  • 2 (52)
  • 3 (52)
  • 4 (27)
  • 5 (7)
  • 6 (3)
Insert Geometry
Cutting Tool Material
  • H W (140)
Back-End
Connection Type
  • SQUARE SHANK (98)
other
Grade
  • W (144)
Platform
  • TopThread TopGroove (123)
Tool Unit
  • I (96)
  • M (48)
Over All Length [L]
  • 63.5 (4)
  • 70.0 (2)
  • 80.0 (2)
  • 88.9 (2)
  • 100.0 (4)
  • 101.6 (2)
  • 114.3 (16)
  • 125.0 (8)
  • 127.0 (15)
  • 150.0 (16)
  • 152.4 (51)
  • 170.0 (16)
  • 177.8 (6)
to
Over All Length [L]
  • 2.5 (4)
  • 2.7559 (2)
  • 3.1496 (2)
  • 3.5 (2)
  • 3.937 (4)
  • 4.0 (2)
  • 4.5 (16)
  • 4.9213 (8)
  • 5.0 (15)
  • 5.9055 (14)
  • 5.906 (2)
  • 6.0 (51)
  • 6.6929 (16)
  • 7.0 (6)
to
Insert Hand
  • L (70)
  • R (70)
obsoleteFacet
  • true (144)
  • false (66)
Cutting Condition Material
  • H-All (133)
  • K-All (133)
  • M-All (133)
  • N-All (133)
  • P-All (133)
  • S-All (133)
No filters matching ""
View Products in
Metric
Inch
TopThread™

Toolholders
(16 Products)
  • Face GroovingFace Grooving
  • GroovingGrooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth [B3] Head Back Offset [B3] Head Back Offset [L3] Head Back Length [L3] Head Back Length Gage Insert Clamp Screw ID Drive Size
3637531 NASL062D NASL062D W 2 9.5250 .3750 9.5250 .3750 9.5250 .3750 152.4000 6.000 19.050 .7500 8.8900 .3500 3.5050 .1380 1.7780 .0700 22.2250 .8750 N.2L 7/64
    3636534 NASL082D NASL082D W 2 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 19.050 .7500 8.8900 .3500 3.5050 .1380         N.2L 7/64
      3637497 NASL083D NASL083D W 3 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 31.750 1.250 12.7000 .5000 5.3340 .2100 3.1750 .1250 33.6300 1.324 N.3L 25 IP
        3641691 NASL1010M2Q NASL1010M2Q W 2 10.0000 .3937 10.0000 .3937 10.0000 .3937 150.0000 5.906 19.000 .7480 9.0000 .3543 3.5100 .1382 2.0300 .0799 19.3500 .7618 N.2L T10
          3637489 NASL102B NASL102B W 2 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 19.050 .7500 8.8900 .3500 3.5050 .1380         N.2L 7/64
            3636524 NASL103B NASL103B W 3 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 31.750 1.250     5.3340 .2100         N.3L 25 IP
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              TopThread™

              Toolholders
              (46 Products)
              • ThreadingThreading
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
              3637525 NEL062 NEL062 W 2 9.5250 .3750 9.5250 .3750 19.0500 .7500 63.5000 2.500 12.700 .5000 12.7000 .5000     3.5050 .1380 N.2R 7/64
                3637503 NEL122B NEL122B W 2 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 12.700 .5000 25.4000 1.000 7.3660 .2900 3.5050 .1380 N.2R 7/64
                  3632144 NEL123B NEL123B W 3 19.0500 .7500 19.0500 .7500 28.5750 1.125 114.3000 4.500 19.050 .7500 50.8000 2.000     5.3340 .2100 N.3R 25 IP
                    3641684 NEL1616H2 NEL1616H2 W 2 16.0000 .6300 16.0000 .6300 20.0000 .7870 100.0000 3.937 15.000 .5906 63.5000 2.500     3.5100 .1380 N.2R T10
                      3637500 NEL162C NEL162C W 2 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 12.700 .5000 25.4000 1.000 10.4140 .4100 3.5050 .1380 N.2R 7/64
                        3632155 NEL163C NEL163C W 3 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 19.050 .7500 50.8000 2.000     5.3340 .2100 N.3R 25 IP
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          TopThread™

                          Toolholders
                          (54 Products)
                          • Face GroovingFace Grooving
                          • GroovingGrooving
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
                          3632161 NSL062 NSL062 W 2 9.5250 .3750 9.5250 .3750 14.2750 .5620 63.5000 2.500 19.050 .7500 8.8900 .3500 3.5050 .1380 N.2L 7/64
                            3637485 NSL082V NSL082V W 2 12.7000 .5000 12.7000 .5000 19.0500 .7500 88.9000 3.500 19.050 .7500 8.8900 .3500 3.5050 .1380 N.2L 7/64
                              3641683 NSL1010E2 NSL1010E2 W 2 10.0000 .3937 10.0000 .3937 14.0000 .5512 70.0000 2.755 19.0000 .7480 8.8000 .3465 3.5100 .1382 N.2L T10
                                3637510 NSL102B NSL102B W 2 15.8750 .6250 15.8750 .6250 22.2250 .8750 114.3000 4.500 19.050 .7500 8.8900 .3500 3.5050 .1380 N.2L 7/64
                                  3641681 NSL1212F2 NSL1212F2 W 2 12.0000 .4724 12.0000 .4724 16.0000 .6299 80.0000 3.149 19.0000 .7480 8.8000 .3465 3.5100 .1382 N.2L T10
                                    3632145 NSL122B NSL122B W 2 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 19.050 .7500 8.8900 .3500 3.5050 .1380 N.2L 7/64
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      TopGroove™

                                      Toolholders
                                      (22 Products)
                                      • GroovingGrooving
                                      • Face GroovingFace Grooving
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size Shim Screw ID Drive Size
                                      3632151 NSL164C NSL164C W 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 35.052 1.380 13.7160 .5400 7.4680 .2940 N.4L 25 IP  
                                        3639040 NSL164D NSL164D W 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 35.052 1.380 13.7160 .5400 7.4680 .2940 N.4L 25 IP  
                                          3641699 NSL204C NSL204C W 31.7500 1.250 31.7500 1.250 38.1000 1.500 127.0000 5.000 35.0520 1.380 13.7160 .5400 7.4680 .2940 N.4L 25 IP  
                                            3639036 NSL204D NSL204D W 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 35.052 1.380 13.7160 .5400 7.4680 .2940 N.4L 25 IP  
                                              3637507 NSL206D NSL206D W 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 35.052 1.380 17.0180 .6700 8.4840 .3340 N.6L 5/32 1/16
                                                3637505 NSL244D NSL244D W 38.1000 1.500 38.1000 1.500 50.8000 2.000 152.4000 6.000 38.1000 1.500 13.7160 .5400 7.4680 .2940 N.4L 25 IP  
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty
                                                  TopGroove™

                                                  Toolholders
                                                  (6 Products)
                                                  • GroovingGrooving
                                                  • Face GroovingFace Grooving
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
                                                  3637518 NSLDH203D NSLDH203D W 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 31.750 1.250 15.7480 .6200 5.3340 .2100 N.3L 25 IP
                                                    3637547 NSRDH122B NSRDH122B W 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 19.050 .7500 10.1600 .4000 3.5050 .1380 N.2R 7/64
                                                      3637499 NSRDH163C NSRDH163C W 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.750 1.250 14.7320 .5800 5.3340 .2100 N.3R 25 IP
                                                        3637528 NSRDH163D NSRDH163D W 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.750 1.250 14.7320 .5800 5.3340 .2100 N.3R 25 IP
                                                          3637511 NSRDH203D NSRDH203D W 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 31.750 1.250 15.7480 .6200 5.3340 .2100 N.3R 25 IP
                                                            3637530 NSRDH204D NSRDH204D W 31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 35.052 1.380 15.7480 .6200 7.4680 .2940 N.4R 25 IP
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              Qty
                                                              If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                              You are about to create a duplicate . Do you want to proceed?
                                                              You are about to delete Do you want to proceed?
                                                              What would you like to rename your to?
                                                              Please enter a valid name
                                                              Please enter a name for the duplicate
                                                              Please enter a valid name
                                                              You are about to add to your My Solutions page. Do you want to proceed?
                                                              Please enter a valid name
                                                              Send a copy of

                                                              Please enter a valid Email
                                                              Please enter a valid name

                                                              We have found the following CAD Drawings

                                                              Select the files you are looking for and download them all at once

                                                              You should be logged to see your dashboard information
                                                              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                              item(s) successfully added to the cart
                                                              View Cart