Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

ProGroove™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (126)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (126)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (126)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (126)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (126)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (126)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (126)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (126)
  • M Stainless Steel (139)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (139)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (139)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (139)
  • K Cast Iron (125)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (125)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (125)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (125)
  • N Non-Ferrous Materials (71)
    • N1
      Wrought Aluminum
      (71)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (71)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (71)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (71)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (71)
    • N6
      Carbon, Graphite Composites, CFRP
      (71)
    • N7
      MMC's
      (71)
  • S High-Temp Alloys (71)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (71)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (71)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (71)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (71)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
    • H2
      Hardened Materials 48-55 HRC
      (2)
    • H3
      Hardened Materials 56-60 HRC
      (2)
    • H4
      Hardened Materials >60 HRC
      (2)
Applications
  • Cut-Off Cut-Off (45)
  • Deep Grooving Deep Grooving (72)
  • Grooving Grooving (110)
  • Multiple Direction Cutting Multiple Direction Cutting (79)
  • Profiling Profiling (30)
  • Turning Turning (8)
Cutting Condition
  • Lightly Interrupted Cut (2)
  • Smooth Cut (3)
  • Varying Depth of Cut (3)
Tool Cutting Edge Angle
  • 90.0 (99)
to
Connection Style
  • Toolholder (99)
Cutting Edges Per Insert
  • 1.0 (177)
  • 3.0 (3)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.2 (50)
  • 0.25 (39)
  • 0.3 (55)
  • 0.397 (2)
  • 0.4 (14)
  • 0.6 (12)
  • 0.8 (38)
  • 1.191 (2)
  • 1.2 (3)
  • 1.5 (11)
  • 1.6 (1)
  • 2.0 (11)
  • 2.5 (4)
  • 3.0 (2)
to
Corner Radius
  • 0.0079 (50)
  • 0.0098 (39)
  • 0.0118 (55)
  • 0.0156 (2)
  • 0.0157 (12)
  • 0.0158 (2)
  • 0.0236 (12)
  • 0.0313 (3)
  • 0.0315 (35)
  • 0.0469 (3)
  • 0.0591 (11)
  • 0.0625 (1)
  • 0.0787 (11)
  • 0.0984 (4)
  • 0.1181 (2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • CW2015 (2)
  • CW5025 (2)
  • HK1500 (2)
  • HK15M (2)
  • PB100 (2)
  • PB250 (2)
  • SP0A00 (2)
  • SPTM00 (2)
  • THM (58)
  • THM X (1)
  • THM-F (2)
  • THM-X (2)
  • THMF-X (2)
  • TN200 (34)
  • TN2000 (2)
  • TN35 (3)
  • TN4000 (2)
  • TN5015 (3)
  • TN5120 (3)
  • TN6030 (40)
  • TN7010 (3)
  • TN7015 (3)
  • TN7025 (3)
  • TN7035 (3)
  • TN7110 (3)
  • TN7115 (3)
  • TN7125 (3)
  • TN7135 (1)
  • TN7525 (67)
  • TN7535 (71)
  • TN8025 (40)
  • TPC25 (33)
  • TPC35 (39)
  • TTI15 (2)
  • TTM (4)
  • TTM08 (3)
  • TTM09 (15)
  • TTMS (2)
  • TTR (3)
  • TTR-X (3)
  • TTS (3)
  • TTX (3)
  • WBH25U (2)
  • WDN25U (3)
  • WK20CT (3)
  • WM35CT (38)
  • WP15CT (3)
  • WP25CT (3)
  • WP35CT (3)
Hand Of Tool
  • L (43)
  • N (11)
  • R (45)
Wiper Insert
  • N (177)
Maximum Axial Groove Diameter
  • 25.4 (16)
  • 31.999 (4)
  • 32.0 (6)
to
Maximum Axial Groove Diameter
  • 1.0 (16)
  • 1.2598 (10)
to
Cutting Direction
  • E (99)
Rake Angle Style
  • NEUTRAL (ZERO) (87)
  • POSITIVE-ZERO (12)
Front-End
Clamp Style
  • C (3)
  • M (9)
  • W (8)
  • Y (79)
Insert Shape
  • PRISMATIC (228)
  • T-TRIANGLE 60 (3)
Cutting Width
  • 2.1 (13)
  • 2.25 (10)
  • 3.0 (11)
  • 3.1 (28)
  • 3.25 (18)
  • 3.27 (11)
  • 4.0 (11)
  • 4.1 (28)
  • 4.25 (18)
  • 4.276 (11)
  • 5.0 (4)
  • 5.1 (16)
  • 6.0 (2)
  • 6.1 (12)
  • 8.15 (19)
  • 10.15 (7)
  • 12.2 (8)
  • 14.2 (6)
  • 16.2 (7)
to
Cutting Width
  • 0.0827 (13)
  • 0.0886 (10)
  • 0.1181 (11)
  • 0.122 (28)
  • 0.128 (18)
  • 0.1287 (11)
  • 0.1575 (11)
  • 0.1614 (28)
  • 0.1673 (18)
  • 0.1683 (11)
  • 0.1969 (4)
  • 0.2008 (16)
  • 0.2362 (2)
  • 0.2402 (12)
  • 0.3209 (16)
  • 0.3213 (6)
  • 0.3996 (3)
  • 0.4 (6)
  • 0.48 (8)
  • 0.4803 (4)
  • 0.5591 (3)
  • 0.5594 (6)
  • 0.6378 (4)
  • 0.6382 (6)
to
Maximum Cutting Depth
  • 10.0 (16)
  • 12.5 (10)
  • 12.502 (6)
  • 16.0 (10)
  • 20.0 (9)
  • 22.0 (2)
  • 23.0 (1)
  • 25.0 (11)
  • 25.001 (6)
  • 28.0 (1)
  • 30.0 (4)
  • 31.999 (1)
  • 32.0 (10)
  • 34.0 (1)
  • 40.0 (4)
  • 50.0 (2)
  • 60.0 (1)
  • 100.0 (1)
to
Maximum Cutting Depth
  • 0.3937 (16)
  • 0.4921 (10)
  • 0.4922 (6)
  • 0.6299 (10)
  • 0.7874 (9)
  • 0.8661 (2)
  • 0.9055 (1)
  • 0.9843 (17)
  • 1.1024 (1)
  • 1.1811 (4)
  • 1.2598 (11)
  • 1.3386 (1)
  • 1.5748 (4)
  • 1.9685 (2)
  • 2.3622 (1)
  • 3.937 (1)
to
Insert Size
  • 10 (1)
  • 12 (2)
  • 14 (2)
  • 16 (1)
  • 2 (8)
  • 3 (20)
  • 4 (21)
  • 5 (11)
  • 6 (6)
  • 8 (7)
Insert Geometry
Shape
  • PRISMATIC (132)
Insert Seat Size
  • 2 (19)
  • 3 (28)
  • 4 (28)
  • 5 (14)
  • 6 (12)
  • 8 (11)
Cutting Tool Material
  • B H (2)
  • C A (2)
  • C N (2)
  • D P (3)
  • H T (2)
  • H W (171)
Back-End
Connection Type
  • SQUARE SHANK (91)
other
Grade
  • THM (13)
  • TN200 (7)
  • TN6030 (13)
  • TN7525 (25)
  • TN7535 (29)
  • TN8025 (13)
  • TPC25 (6)
  • TPC35 (12)
  • TTM (1)
  • TTM09 (2)
  • W (97)
  • WM35CT (11)
Platform
  • ProGroove (159)
  • WGC (11)
Tool Unit
  • I (162)
  • M (212)
Over All Length [L]
  • 86.0 (1)
  • 90.0 (1)
  • 100.0 (10)
  • 110.0 (4)
  • 125.0 (12)
  • 127.0 (7)
  • 150.0 (26)
  • 152.4 (11)
  • 152.91 (3)
  • 160.0 (2)
  • 170.0 (22)
  • 178.31 (4)
  • 178.313 (1)
  • 200.0 (5)
  • 250.0 (1)
to
Over All Length [L]
  • 3.3858 (1)
  • 3.5433 (1)
  • 3.937 (10)
  • 4.3307 (4)
  • 4.9213 (12)
  • 5.0 (7)
  • 5.9055 (26)
  • 6.0 (11)
  • 6.0201 (3)
  • 6.2992 (2)
  • 6.6929 (22)
  • 7.0201 (4)
  • 7.0202 (1)
  • 7.874 (5)
  • 9.8425 (1)
to
Insert Hand
  • L (37)
  • N (142)
  • R (42)
Category Path
Cutting Condition Material
  • K-All (3)
  • P-All (3)
No filters matching ""
Narrow by category:
View Products in
Metric
Inch
KS

Integral Toolholders for Grooving with ISO/ANSI Inserts
(3 Products)
  • GroovingGrooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [W] Groove Width [W] Groove Width [H] Shank Height [H] Shank Height [H1] Cutting Height [H1] Cutting Height [B] Shank Width [B] Shank Width [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [GAAP] Axial Rake Angle Gage Insert
2007414 12191062086 12191062086 W 15.3000 .6024 20.0000 .7874 20.0000 .7874 13.0000 .5118 150.0000 5.905 27.0000 1.063 3.000 TP..1603../TP..32..
    List price:
    $92.69 /each.
    Your price::
    2022922 12191062586 12191062586   15.3000 .6024 25.0000 .9843 25.0000 .9842 13.0000 .5118 150.0000 5.905 27.0000 1.063 3.000 TP..1603../TP..32..
      List price:
      $101.90 /each.
      Your price::
      2058066 12191062686 12191062686   20.2000 .7953 25.0000 .9843 25.0000 .9842 18.0000 .7087 150.0000 5.905 35.0000 1.378 3.000 TP..2204../TP..43..
        List price:
        $97.98 /each.
        Your price::
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        ProGroove™

        Grooving and Profiling Integral Holders
        (40 Products)
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [W] Groove Width [W] Groove Width [CD] Cutting Depth [CD] Cutting Depth [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [H1] Cutting Height [H1] Cutting Height
        2962733 12250013000 12250013000 W 3.0990 .1220 10.0000 .3937 25.4000 1.000 25.0010 .9843 25.0010 .9843 19.4060 .7640 150.0000 5.905 31.0010 1.220 19.0500 .7500
          Your price::
          2962734 12250013100 12250013100 W 3.0990 .1220 10.0000 .3937 25.4000 1.000 19.0500 .7500 19.0500 .7500 19.4010 .7638 127.0000 5.000 25.9990 1.023 19.0500 .7500
            Your price::
            2962735 12250013200 12250013200 W 3.0990 .1220 10.0000 .3937 25.4000 1.000 25.4000 1.000 25.4000 1.000 25.8060 1.016 152.4000 6.000 25.9990 1.023 25.4000 1.000
              Your price::
              2962736 12250013300 12250013300 W 3.0990 .1220 10.0000 .3937 25.4000 1.000 25.4000 1.000 25.4000 1.000 25.8060 1.016 152.4000 6.000 25.9990 1.023 25.4000 1.000
                Your price::
                2962737 12250014000 12250014000   4.0890 .1610 12.5020 .4922 31.9990 1.259 19.0500 .7500 19.0500 .7500 19.5020 .7678 127.0000 5.000 31.0010 1.220 19.0500 .7500
                  Your price::
                  2962738 12250014100 12250014100 W 4.0890 .1610 12.5020 .4922 31.9990 1.259 19.0500 .7500 19.0500 .7500 19.5020 .7678 127.0000 5.000 31.0010 1.220 19.0500 .7500
                    Your price::
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    ProGroove™

                    Grooving and Cut-Off Integral Holders
                    (31 Products)
                    • GroovingGrooving
                    • Cut-OffCut-Off
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [W] Groove Width [W] Groove Width [CD] Cutting Depth [CD] Cutting Depth [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [H1] Cutting Height [H1] Cutting Height
                    2962743 12250023000 12250023000   3 3.0990 .1220 20.0000 .7874 19.0500 .7500 19.0500 .7500 19.4010 .7638 127.0000 5.000 31.9990 1.259 19.0500 .7500
                      List price:
                      $130.22 /each.
                      Your price::
                      2962744 12250023100 12250023100   3 3.0990 .1220 20.0000 .7874 19.0500 .7500 19.0500 .7500 19.4010 .7638 127.0000 5.000 31.9990 1.259 19.0500 .7500
                        List price:
                        $130.22 /each.
                        Your price::
                        2962745 12250023200 12250023200 W 3 3.0990 .1220 25.0010 .9843 25.4000 1.000 25.4000 1.000 25.7050 1.012 152.4000 6.000 40.0000 1.574 25.4000 1.000
                          List price:
                          $130.22 /each.
                          Your price::
                          2962746 12250023300 12250023300   3 3.0990 .1220 25.0010 .9843 25.4000 1.000 25.4000 1.000 25.7050 1.012 152.4000 6.000 40.0000 1.574 25.4000 1.000
                            Your price::
                            2962747 12250024000 12250024000   4 4.0890 .1610 25.0010 .9843 19.0500 .7500 19.0500 .7500 19.5020 .7678 127.0000 5.000 40.0000 1.574 19.0500 .7500
                              Your price::
                              2962748 12250024100 12250024100   4 4.0890 .1610 25.0010 .9843 19.0500 .7500 19.0500 .7500 19.5020 .7678 127.0000 5.000 40.0000 1.574 19.0500 .7500
                                Your price::
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor
                                LG

                                Integral Toolholders
                                (9 Products)
                                • GroovingGrooving
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Number of Insert Seats [W] Groove Width [W] Groove Width [CD] Cutting Depth [CD] Cutting Depth [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [H1] Cutting Height [H1] Cutting Height
                                2022446 12250110100 12250110100 W 1 8.0000 .3150 20.0000 .7874 32.0000 1.259 25.0000 .9843 25.5000 1.003 170.0000 6.692 32.0000 1.259
                                  List price:
                                  $157.66 /each.
                                  Your price::
                                  2022447 12250110200 12250110200 W 1 8.0000 .3150 20.0000 .7874 32.0000 1.259 25.0000 .9843 25.5000 1.003 170.0000 6.692 32.0000 1.259
                                    List price:
                                    $162.39 /each.
                                    Your price::
                                    2008147 12250110300 12250110300 W 1 10.0000 .3937 20.0000 .7874 32.0000 1.259 25.0000 .9843 25.5000 1.003 170.0000 6.692 32.0000 1.259
                                      List price:
                                      $169.87 /each.
                                      Your price::
                                      2008144 12250110400 12250110400 W 1 10.0000 .3937 20.0000 .7874 32.0000 1.259 25.0000 .9843 25.5000 1.003 170.0000 6.692 32.0000 1.259
                                        List price:
                                        $174.96 /each.
                                        Your price::
                                        2021719 12250110500 12250110500 W 1 12.0000 .4724 25.0000 .9843 40.0000 1.574 32.0000 1.259 33.0000 1.299 200.0000 7.874 40.0000 1.574
                                          List price:
                                          $173.81 /each.
                                          Your price::
                                          2021718 12250110600 12250110600 W 1 12.0000 .4724 25.0000 .9843 40.0000 1.574 32.0000 1.259 33.0000 1.299 200.0000 7.874 40.0000 1.574
                                            List price:
                                            $187.10 /each.
                                            Your price::
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Grooving and Cut-Off • WGC

                                            Blade Holders
                                            (8 Products)
                                            • Cut-OffCut-Off
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [HW] Shank Height [HW] Shank Height [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [H2] Overall Height [H2] Overall Height [B2] Overall Width [B2] Overall Width [H3] Head Bottom Offset [H3] Head Bottom Offset [L] Overall Length [L] Overall Length
                                            2021634 12251212500 12251212500 W 19.0000 .7480 19.0000 .7480 19.0000 .7480 17.3000 .6811 25.0000 .9843 19.0000 .7480     100.0000 3.937
                                              List price:
                                              $198.77 /each.
                                              Your price::
                                              2008141 12251213200 12251213200 W 26.0000 1.023 26.0000 1.023 20.0000 .7874 15.0000 .5906 32.0000 1.260 20.0000 .7874     125.0000 4.921
                                                Your price::
                                                2021626 12251221600 12251221600 W 26.0000 1.023 26.0000 1.023 16.0000 .6299 31.0000 1.220 40.0000 1.574 36.0000 14.173 12.0000 .4724 100.0000 3.937
                                                  List price:
                                                  $195.14 /each.
                                                  Your price::
                                                  2021625 12251221900 12251221900 W 19.0000 .7480 19.0000 .7480 16.0000 .6299 28.3000 1.114 30.0000 1.181 30.0000 1.181 4.0000 .1575 100.0000 3.937
                                                    Your price::
                                                    2007826 12251222000 12251222000 W 26.0000 1.023 26.0000 1.023 18.0000 .7087 33.0000 1.299 40.0000 1.574 38.0000 1.496 8.0000 .3150 100.0000 3.937
                                                      List price:
                                                      $192.86 /each.
                                                      Your price::
                                                      2021635 12251222500 12251222500 W 32.0000 1.259 32.0000 1.259 20.0000 .7874 35.0000 1.378 50.0000 1.968 40.0000 1.574 10.0000 .3937 125.0000 4.921
                                                        List price:
                                                        $195.93 /each.
                                                        Your price::
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        ProGroove™

                                                        Blades
                                                        (8 Products)
                                                        • Cut-OffCut-Off
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [W] Groove Width [W] Groove Width [H] Shank Height [H] Shank Height [H1] Cutting Height [H1] Cutting Height [L1] Tool Length [L1] Tool Length [B] Shank Width [B] Shank Width [CD] Cutting Depth [CD] Cutting Depth
                                                        2021629 12251332000 12251332000 W 2 2.1000 .0827 19.0000 .7480 15.7000 .6181 90.0000 3.543 1.7000 .0669 20.0000 .7874
                                                          List price:
                                                          $102.08 /each.
                                                          Your price::
                                                          2021640 12251343000 12251343000 W 3 3.1000 .1220 26.0000 1.023 21.4000 .8425 110.0000 4.330 2.4000 .0945 40.0000 1.574
                                                            List price:
                                                            $112.82 /each.
                                                            Your price::
                                                            2021641 12251344000 12251344000 W 4 4.1000 .1614 26.0000 1.023 21.4000 .8425 110.0000 4.330 3.2000 .1260 40.0000 1.574
                                                              List price:
                                                              $112.82 /each.
                                                              Your price::
                                                              2008113 12251352000 12251352000 W 2 2.1000 .0827 32.0000 1.259 25.0000 .9842 150.0000 5.905 1.7000 .0669 25.0000 .9843
                                                                Your price::
                                                                2008116 12251353000 12251353000 W 3 3.1000 .1220 32.0000 1.259 25.0000 .9842 150.0000 5.905 2.4000 .0945 50.0000 1.968
                                                                  List price:
                                                                  $136.15 /each.
                                                                  Your price::
                                                                  2008119 12251354000 12251354000 W 4 4.1000 .1614 32.0000 1.259 25.0000 .9842 150.0000 5.905 3.2000 .1260 50.0000 1.968
                                                                    List price:
                                                                    $136.15 /each.
                                                                    Your price::
                                                                    List price:
                                                                    Discount: %
                                                                    Your price::
                                                                    Replacement This item is not available
                                                                    Replacement Product This item may be available through a distributor
                                                                    ProGroove™

                                                                    Grooving and Cut-Off Inserts
                                                                    (52 Products)
                                                                    View Products
                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size Hand of Tool [W] Cutting Width [W] Cutting Width [RL] Corner Radius [RL] Corner Radius Cutting Edge Angle Right Hand
                                                                    2498717 123567230 123567230 TN7535 3 R 3.1000 .1220 0.2500 .0098 6.000
                                                                      List price:
                                                                      $17.71 /each.
                                                                      Your price::
                                                                      2498729 123567230 123567230 TN7525 3 R 3.1000 .1220 0.2500 .0098 6.000
                                                                        List price:
                                                                        $17.71 /each.
                                                                        Your price::
                                                                        2953291 123567230 123567230 TN6030 3 R 3.1000 .1220 0.2500 .0098 6.000
                                                                          List price:
                                                                          $16.94 /each.
                                                                          Your price::
                                                                          6245486 PGG310R06U25 123567230 WM35CT 3 R 3.1000 .1220 0.2500 .0098 6.000
                                                                            List price:
                                                                            $1.65 /each.
                                                                            Your price::
                                                                            2498718 123567231 123567231 TN7535 3 L 3.1000 .1220 0.2500 .0098  
                                                                              List price:
                                                                              $17.71 /each.
                                                                              Your price::
                                                                              2498730 123567231 123567231 TN7525 3 L 3.1000 .1220 0.2500 .0098  
                                                                                List price:
                                                                                $17.71 /each.
                                                                                Your price::
                                                                                List price:
                                                                                Discount: %
                                                                                Your price::
                                                                                Replacement This item is not available
                                                                                Replacement Product This item may be available through a distributor
                                                                                ProGroove™

                                                                                Grooving and Cut-Off Inserts
                                                                                (32 Products)
                                                                                View Products
                                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [W] Cutting Width [W] Cutting Width [RR] Corner Radius [RR] Corner Radius
                                                                                2498721 123567420 123567420 TN7535 2 2.1000 .0827 0.2000 .0079
                                                                                  List price:
                                                                                  $17.45 /each.
                                                                                  Your price::