COVID-19: How WIDIA is responding

PSC 63 Internal Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (70)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (70)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (70)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (70)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (70)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (70)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (70)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (70)
  • M Stainless Steel (70)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (70)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (70)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (70)
  • K Cast Iron (70)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (70)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (70)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (70)
  • N Non-Ferrous Materials (70)
    • N1
      Wrought Aluminum
      (70)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (70)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (51)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (70)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (70)
    • N6
      Carbon, Graphite Composites, CFRP
      (68)
    • N7
      MMC's
      (66)
  • S High-Temp Alloys (70)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (70)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (70)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (70)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (70)
  • H Hardened Materials (68)
    • H1
      Hardened Materials 44-48 HRC
      (68)
    • H2
      Hardened Materials 48-55 HRC
      (56)
    • H3
      Hardened Materials 56-60 HRC
      (46)
    • H4
      Hardened Materials >60 HRC
      (46)
Applications
  • Back Boring Back Boring (58)
  • Chamfer Turning Chamfer Turning (12)
  • Cut-Off Cut-Off (44)
  • Deep Grooving Deep Grooving (44)
  • Face Grooving Face Grooving (58)
  • Facing Facing (58)
  • Grooving Grooving (58)
  • ID Facing ID Facing (58)
  • ID Grooving ID Grooving (58)
  • ID Thread Turning ID Thread Turning (58)
  • Multiple Direction Cutting Multiple Direction Cutting (70)
  • OD Thread Turning OD Thread Turning (58)
  • Plunge Turning Plunge Turning (54)
  • Profiling Profiling (50)
  • TRN Boring TRN Boring (58)
  • Turning Turning (46)
Type of Thread
  • 55 (12)
  • 60 (30)
  • ACME (24)
  • API (16)
  • API BUTTRESS (4)
  • API RD (16)
  • BSPT (8)
  • BSW (20)
  • BUTTRESS (18)
  • M (23)
  • NPT (16)
  • NPTF (8)
  • RD DIN 405 (12)
  • STUB ACME (20)
  • TR DIN 103 (12)
  • UN (26)
  • UNJ (16)
Cutting Condition
  • Heavily Interrupted Cut (54)
  • Interrupted (22)
  • Lightly Interrupted Cut (54)
  • Smooth Cut (54)
  • Varying Depth of Cut (54)
Tool Cutting Edge Angle
  • 75.0 (2)
  • 90.0 (30)
  • 93.0 (16)
  • 95.0 (18)
  • 107.5 (4)
to
Connection Style
  • PSC (70)
Cutting Edges Per Insert
  • 1.0 (40)
  • 2.0 (56)
  • 3.0 (12)
  • 4.0 (28)
  • 8.0 (14)
to
Corner configuration
Corner Radius
  • 0.026 (4)
  • 0.03 (8)
  • 0.038 (12)
  • 0.051 (12)
  • 0.056 (4)
  • 0.057 (4)
  • 0.066 (8)
  • 0.07 (8)
  • 0.076 (22)
  • 0.08 (14)
  • 0.081 (4)
  • 0.089 (10)
  • 0.09 (10)
  • 0.094 (8)
  • 0.097 (8)
  • 0.1 (35)
  • 0.102 (32)
  • 0.108 (4)
  • 0.116 (4)
  • 0.117 (4)
  • 0.127 (8)
  • 0.13 (2)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.15 (8)
  • 0.152 (8)
  • 0.155 (8)
  • 0.157 (8)
  • 0.16 (8)
  • 0.165 (12)
  • 0.173 (8)
  • 0.178 (8)
  • 0.18 (3)
  • 0.185 (3)
  • 0.19 (18)
  • 0.191 (18)
  • 0.198 (8)
  • 0.2 (37)
  • 0.202 (11)
  • 0.203 (9)
  • 0.21 (8)
  • 0.224 (8)
  • 0.235 (8)
  • 0.244 (4)
  • 0.25 (8)
  • 0.251 (8)
  • 0.254 (12)
  • 0.255 (4)
  • 0.269 (8)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (8)
  • 0.305 (4)
  • 0.315 (10)
  • 0.318 (12)
  • 0.33 (8)
  • 0.34 (15)
  • 0.343 (11)
  • 0.356 (8)
  • 0.396 (1)
  • 0.397 (28)
  • 0.4 (39)
  • 0.404 (8)
  • 0.406 (16)
  • 0.43 (8)
  • 0.432 (4)
  • 0.445 (12)
  • 0.472 (4)
  • 0.49 (8)
  • 0.5 (8)
  • 0.508 (8)
  • 0.565 (2)
  • 0.57 (4)
  • 0.572 (12)
  • 0.575 (8)
  • 0.7 (4)
  • 0.75 (6)
  • 0.787 (14)
  • 0.79 (2)
  • 0.792 (13)
  • 0.794 (32)
  • 0.795 (1)
  • 0.8 (40)
  • 0.902 (12)
  • 0.93 (2)
  • 0.936 (4)
  • 1.0 (16)
  • 1.188 (10)
  • 1.19 (6)
  • 1.191 (26)
  • 1.194 (14)
  • 1.195 (4)
  • 1.2 (34)
  • 1.25 (14)
  • 1.404 (2)
  • 1.5 (14)
  • 1.585 (8)
  • 1.587 (6)
  • 1.588 (33)
  • 1.59 (2)
  • 1.6 (24)
  • 1.75 (14)
  • 1.98 (4)
  • 1.981 (8)
  • 2.0 (12)
  • 2.25 (12)
  • 2.38 (6)
  • 2.381 (1)
  • 2.388 (12)
  • 2.39 (2)
  • 2.4 (8)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
  • 3.2 (6)
to
Corner Radius
  • 0.0011 (4)
  • 0.0012 (4)
  • 0.0015 (12)
  • 0.002 (12)
  • 0.0023 (4)
  • 0.0026 (8)
  • 0.0028 (8)
  • 0.003 (22)
  • 0.0031 (14)
  • 0.0032 (4)
  • 0.0035 (10)
  • 0.0037 (8)
  • 0.0038 (8)
  • 0.004 (46)
  • 0.0043 (4)
  • 0.0046 (8)
  • 0.005 (10)
  • 0.0052 (8)
  • 0.0053 (8)
  • 0.0059 (8)
  • 0.006 (16)
  • 0.0062 (8)
  • 0.0063 (4)
  • 0.0065 (12)
  • 0.0068 (8)
  • 0.007 (8)
  • 0.0075 (18)
  • 0.0078 (8)
  • 0.0079 (4)
  • 0.008 (40)
  • 0.0083 (14)
  • 0.0088 (8)
  • 0.0093 (8)
  • 0.0096 (4)
  • 0.0099 (8)
  • 0.01 (12)
  • 0.0106 (8)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (8)
  • 0.012 (4)
  • 0.0124 (8)
  • 0.0125 (12)
  • 0.013 (15)
  • 0.0135 (15)
  • 0.014 (8)
  • 0.0156 (40)
  • 0.0158 (4)
  • 0.0159 (8)
  • 0.016 (28)
  • 0.017 (12)
  • 0.0175 (12)
  • 0.0186 (4)
  • 0.0193 (8)
  • 0.0197 (8)
  • 0.02 (8)
  • 0.022 (4)
  • 0.0225 (12)
  • 0.0276 (4)
  • 0.0295 (6)
  • 0.031 (32)
  • 0.0312 (32)
  • 0.0313 (40)
  • 0.0315 (14)
  • 0.0355 (12)
  • 0.0368 (2)
  • 0.0369 (4)
  • 0.0394 (16)
  • 0.0468 (10)
  • 0.0469 (34)
  • 0.047 (40)
  • 0.0472 (6)
  • 0.0492 (14)
  • 0.0516 (2)
  • 0.0553 (2)
  • 0.0591 (14)
  • 0.0625 (42)
  • 0.063 (21)
  • 0.0689 (14)
  • 0.078 (8)
  • 0.0787 (12)
  • 0.0886 (12)
  • 0.0938 (9)
  • 0.094 (18)
  • 0.0984 (4)
  • 0.106 (4)
  • 0.125 (4)
  • 0.126 (6)
  • 0.1563 (6)
  • 0.312 (7)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (22)
  • 241 (6)
  • CL4 (15)
  • CM2 (22)
  • CM3 (15)
  • CM4 (14)
  • CPX (22)
  • CW2 (13)
  • CW2015 (22)
  • CW5025 (22)
  • GX (8)
  • HCK10 (4)
  • HCK20 (4)
  • HK1500 (19)
  • HK35 (4)
  • HT2 (27)
  • HTX (18)
  • HWK15 (4)
  • K060 (9)
  • K090 (22)
  • K1 (6)
  • K10M (34)
  • K10P (30)
  • K10U (17)
  • K15 (10)
  • K15U (24)
  • K20K (30)
  • K21 (8)
  • K25M (22)
  • K25P (20)
  • K2885 (14)
  • K313 (58)
  • K35P (9)
  • K420 (35)
  • K45 (9)
  • K4H (11)
  • K6 (1)
  • K68 (60)
  • KB1340 (10)
  • KB1345 (23)
  • KB1610 (13)
  • KB1625 (13)
  • KB1630 (23)
  • KB5610 (11)
  • KB5625 (21)
  • KB5630 (11)
  • KB9610 (20)
  • KB9640 (10)
  • KBH10 (24)
  • KBH10B (14)
  • KBH20 (28)
  • KBH20B (14)
  • KBK35 (6)
  • KC210 (16)
  • KC250 (31)
  • KC5010 (62)
  • KC5020P (8)
  • KC5025 (70)
  • KC5410 (54)
  • KC5510 (24)
  • KC5525 (16)
  • KC710 (30)
  • KC720 (57)
  • KC722 (28)
  • KC730 (63)
  • KC7310 (26)
  • KC732 (39)
  • KC8050 (40)
  • KC810 (58)
  • KC850 (58)
  • KC9010 (24)
  • KC9025 (40)
  • KC910 (49)
  • KC9105 (38)
  • KC9110 (58)
  • KC9120 (34)
  • KC9125 (40)
  • KC9125RR (2)
  • KC9140 (24)
  • KC9145 (22)
  • KC9210 (7)
  • KC9215 (24)
  • KC9225 (40)
  • KC9240 (36)
  • KC9240NEW (36)
  • KC9245 (24)
  • KC9315 (40)
  • KC9320 (54)
  • KC9325 (28)
  • KC935 (58)
  • KC950 (48)
  • KC990 (24)
  • KCD25 (15)
  • KCK05 (38)
  • KCK05B (32)
  • KCK15 (32)
  • KCK15B (34)
  • KCK20 (51)
  • KCK20B (54)
  • KCM15 (36)
  • KCM15B (34)
  • KCM25 (38)
  • KCM25B (36)
  • KCM35 (30)
  • KCM35B (21)
  • KCP05 (38)
  • KCP05B (22)
  • KCP10 (38)
  • KCP10B (58)
  • KCP15 (4)
  • KCP25 (38)
  • KCP25B (58)
  • KCP30 (36)
  • KCP30B (26)
  • KCP40 (22)
  • KCP40B (26)
  • KCPK05 (24)
  • KCS10 (18)
  • KCS10B (38)
  • KCU10 (58)
  • KCU25 (58)
  • KD050 (19)
  • KD081 (23)
  • KD100 (25)
  • KD120 (24)
  • KD1400 (15)
  • KD1405 (11)
  • KD1425 (25)
  • KM1 (8)
  • KMF (6)
  • KT1120 (6)
  • KT125 (18)
  • KT150 (11)
  • KT175 (38)
  • KT315 (52)
  • KT325 (27)
  • KTP10 (9)
  • KU10 (8)
  • KU10T (48)
  • KU25T (22)
  • KU30T (54)
  • KY1310 (15)
  • KY1320 (22)
  • KY1540 (9)
  • KY1615 (22)
  • KY2000 (15)
  • KY2100 (9)
  • KY3000 (34)
  • KY3400 (15)
  • KY3500 (22)
  • KY4000 (14)
  • KY4300 (13)
  • KY4400 (22)
  • KYHK15B (22)
  • KYK10 (9)
  • KYK25 (15)
  • KYK35 (22)
  • KYS25 (9)
  • KYS30 (9)
  • NL200 (13)
  • NL250 (24)
  • NL300 (25)
  • NL400 (12)
  • NL920 (20)
  • P25 (18)
  • PB100 (6)
  • PB170 (10)
  • PB250 (10)
  • PB300 (6)
  • PD100 (4)
  • PD50 (4)
  • PS5 (15)
  • SP0819 (19)
  • SP0A00 (2)
  • SP0PW3 (4)
  • SP3019 (14)
  • SP4019 (18)
  • SP4066 (4)
  • SP61EJ (2)
  • THM (30)
  • THM-X (19)
  • THMF-X (8)
  • TN10P (49)
  • TN10U (28)
  • TN15M (34)
  • TN15U (24)
  • TN2000 (23)
  • TN20K (34)
  • TN20P (36)
  • TN30M (36)
  • TN30P (22)
  • TN4000 (19)
  • TN5015 (27)
  • TN5020 (31)
  • TN5105 (22)
  • TN5120 (32)
  • TN6010 (36)
  • TN6025 (43)
  • TN7005 (20)
  • TN7010 (32)
  • TN7015 (32)
  • TN7025 (32)
  • TN7035 (29)
  • TN7105 (23)
  • TN7110 (49)
  • TN7115 (32)
  • TN7125 (31)
  • TN7135 (29)
  • TN8025 (28)
  • TTI15 (19)
  • TTM09 (2)
  • TTR (12)
  • TTS (15)
  • TTX (17)
  • W00342 (4)
  • WBH10C (18)
  • WBH10P (11)
  • WBH10U (13)
  • WBH25P (11)
  • WBH25U (20)
  • WBH30P (11)
  • WBK40U (10)
  • WBK45U (18)
  • WDN00U (7)
  • WDN25U (15)
  • WK05CT (28)
  • WK15CT (23)
  • WK20CT (32)
  • WM15CT (36)
  • WM25CT (36)
  • WM35CT (24)
  • WP05CT (6)
  • WP15CT (36)
  • WP20TT (6)
  • WP25CT (36)
  • WP35CT (32)
  • WS10PT (28)
  • WS25PT (24)
  • WU10HT (36)
  • WU10PT (7)
  • WU25PT (4)
  • X00511 (6)
Hand Of Tool
  • L (36)
  • R (34)
Wiper Insert
  • N (70)
  • Y (22)
Minimum Axial Groove Diameter
  • 0.748 (2)
  • 0.7874 (2)
  • 0.9449 (1)
  • 0.9646 (1)
  • 0.9843 (2)
  • 1.2598 (10)
  • 1.3386 (2)
  • 1.5157 (2)
  • 1.5748 (18)
  • 1.8898 (3)
  • 1.9094 (3)
  • 1.9685 (15)
  • 1.969 (2)
  • 2.0866 (2)
  • 2.48 (2)
  • 2.4803 (3)
to
Minimum Axial Groove Diameter
  • 19.0 (2)
  • 20.0 (2)
  • 24.0 (1)
  • 24.5 (1)
  • 25.0 (2)
  • 32.0 (10)
  • 34.0 (2)
  • 38.5 (2)
  • 40.0 (18)
  • 48.0 (3)
  • 48.5 (3)
  • 50.0 (17)
  • 53.0 (2)
  • 63.0 (5)
to
Maximum Axial Groove Diameter
  • 9999.0 (18)
to
Maximum Axial Groove Diameter
  • 393.661 (18)
to
Cutting Direction
  • B (16)
  • E (20)
  • P (2)
  • S (32)
Rake Angle Style
  • DOUBLE NEGATIVE (36)
  • NEGATIVE-ZERO (12)
  • NEUTRAL (ZERO) (4)
Maximum Bore Depth
  • 34.8 (2)
  • 42.0 (2)
  • 48.0 (2)
  • 48.84 (1)
  • 48.87 (1)
  • 62.0 (2)
  • 63.8 (2)
  • 64.0 (4)
  • 64.12 (2)
  • 72.0 (2)
  • 74.0 (4)
  • 80.0 (5)
  • 80.3 (1)
  • 83.29 (2)
  • 84.0 (6)
  • 94.0 (2)
  • 98.18 (2)
  • 99.32 (2)
  • 105.6 (2)
  • 110.2 (2)
  • 111.0 (1)
  • 111.02 (1)
  • 113.0 (2)
  • 114.0 (4)
  • 114.12 (2)
  • 115.0 (4)
  • 115.1 (2)
  • 120.0 (1)
  • 152.0 (5)
to
Maximum Bore Depth
  • 1.3701 (2)
  • 1.6535 (2)
  • 1.8898 (2)
  • 1.9228 (1)
  • 1.924 (1)
  • 2.4409 (2)
  • 2.5118 (2)
  • 2.5197 (4)
  • 2.524 (2)
  • 2.8346 (2)
  • 2.9134 (4)
  • 3.1496 (5)
  • 3.1614 (1)
  • 3.279 (2)
  • 3.3071 (6)
  • 3.7008 (2)
  • 3.865 (2)
  • 3.91 (2)
  • 4.1575 (2)
  • 4.3386 (2)
  • 4.3701 (1)
  • 4.3709 (1)
  • 4.4488 (2)
  • 4.4882 (4)
  • 4.493 (2)
  • 4.5276 (4)
  • 4.531 (2)
  • 4.7244 (1)
  • 5.9843 (5)
to
Boring Bar Material
  • S (70)
Front-End
Clamp Style
  • D (6)
  • N (22)
  • P (18)
  • S (24)
Adapter Front-End
  • BORING BAR ADAPTER (4)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (16)
  • D-DIAMOND/RHOMBIC 55 (10)
  • LT-TRIANGLE LAY DOWN THREAD 60 (12)
  • N/K-PARALLELOGRAM 55 (2)
  • S-SQUARE 90 (2)
  • TN-TOP NOTCH (18)
  • V-DIAMOND/RHOMBIC 35 (10)
Front End Type
  • ZYL - Cylindrical Adapter (4)
Cutting Width
  • 0.5 (6)
  • 0.787 (6)
  • 0.8 (6)
  • 0.889 (6)
  • 0.991 (6)
  • 1.0 (14)
  • 1.041 (6)
  • 1.19 (10)
  • 1.194 (14)
  • 1.199 (3)
  • 1.2 (14)
  • 1.39 (6)
  • 1.397 (6)
  • 1.4 (6)
  • 1.473 (6)
  • 1.5 (14)
  • 1.56 (3)
  • 1.57 (11)
  • 1.575 (14)
  • 1.69 (6)
  • 1.7 (6)
  • 1.702 (6)
  • 1.75 (14)
  • 1.829 (8)
  • 1.94 (6)
  • 1.95 (6)
  • 1.956 (6)
  • 1.981 (8)
  • 2.0 (14)
  • 2.007 (6)
  • 2.2 (14)
  • 2.235 (14)
  • 2.24 (10)
  • 2.25 (10)
  • 2.388 (14)
  • 2.39 (4)
  • 2.464 (8)
  • 2.5 (14)
  • 2.667 (8)
  • 2.74 (6)
  • 2.743 (14)
  • 2.75 (14)
  • 2.794 (8)
  • 2.997 (14)
  • 3.0 (18)
  • 3.099 (8)
  • 3.17 (8)
  • 3.175 (18)
  • 3.18 (5)
  • 3.2 (18)
  • 3.245 (6)
  • 3.25 (8)
  • 3.251 (14)
  • 3.27 (6)
  • 3.32 (4)
  • 3.329 (4)
  • 3.5 (18)
  • 3.607 (8)
  • 3.73 (3)
  • 3.81 (6)
  • 3.84 (6)
  • 3.96 (8)
  • 3.962 (8)
  • 3.974 (4)
  • 3.988 (8)
  • 4.0 (12)
  • 4.24 (4)
  • 4.242 (12)
  • 4.25 (4)
  • 4.3 (8)
  • 4.5 (12)
  • 4.521 (8)
  • 4.699 (10)
  • 4.775 (12)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (8)
  • 4.801 (12)
  • 4.81 (8)
  • 4.88 (4)
  • 4.95 (8)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)