COVID-19: How WIDIA is responding
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (25)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (25)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (25)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (25)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (25)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (25)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (25)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (25)
  • M Stainless Steel (25)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (25)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (25)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (25)
  • K Cast Iron (25)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (25)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (25)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (25)
  • N Non-Ferrous Materials (25)
    • N1
      Wrought Aluminum
      (25)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (25)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (6)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (25)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (25)
    • N6
      Carbon, Graphite Composites, CFRP
      (25)
    • N7
      MMC's
      (25)
  • S High-Temp Alloys (25)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (25)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (25)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (25)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (25)
  • H Hardened Materials (18)
    • H1
      Hardened Materials 44-48 HRC
      (18)
    • H2
      Hardened Materials 48-55 HRC
      (18)
    • H3
      Hardened Materials 56-60 HRC
      (18)
    • H4
      Hardened Materials >60 HRC
      (18)
Applications
  • Back Boring Back Boring (25)
  • Cut-Off Cut-Off (25)
  • Deep Grooving Deep Grooving (25)
  • Face Grooving Face Grooving (25)
  • Facing Facing (25)
  • Grooving Grooving (25)
  • ID Facing ID Facing (25)
  • ID Grooving ID Grooving (25)
  • ID Thread Turning ID Thread Turning (25)
  • Multiple Direction Cutting Multiple Direction Cutting (25)
  • OD Thread Turning OD Thread Turning (25)
  • Plunge Turning Plunge Turning (10)
  • Profiling Profiling (10)
  • TRN Boring TRN Boring (25)
  • Turning Turning (25)
Cutting Condition
  • Heavily Interrupted Cut (25)
  • Interrupted (25)
  • Lightly Interrupted Cut (25)
  • Smooth Cut (25)
  • Varying Depth of Cut (25)
Tool Cutting Edge Angle
  • 45.0 (3)
  • 75.0 (4)
  • 93.0 (6)
  • 95.0 (12)
to
Connection Style
  • PSC (3)
Cutting Edges Per Insert
  • 1.0 (14)
  • 2.0 (16)
  • 3.0 (2)
  • 4.0 (23)
  • 6.0 (2)
  • 8.0 (17)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.1 (6)
  • 0.102 (10)
  • 0.2 (6)
  • 0.203 (4)
  • 0.34 (6)
  • 0.397 (12)
  • 0.4 (16)
  • 0.406 (6)
  • 0.6 (2)
  • 0.792 (10)
  • 0.794 (12)
  • 0.8 (25)
  • 1.188 (4)
  • 1.19 (4)
  • 1.191 (23)
  • 1.2 (25)
  • 1.587 (4)
  • 1.588 (19)
  • 1.6 (25)
  • 2.38 (4)
  • 2.4 (13)
  • 3.2 (11)
  • 4.0 (7)
to
Corner Radius
  • 0.004 (12)
  • 0.008 (6)
  • 0.0083 (4)
  • 0.013 (6)
  • 0.0156 (16)
  • 0.016 (12)
  • 0.031 (14)
  • 0.0312 (12)
  • 0.0313 (25)
  • 0.0315 (4)
  • 0.0468 (4)
  • 0.0469 (25)
  • 0.047 (25)
  • 0.0472 (4)
  • 0.0625 (25)
  • 0.063 (25)
  • 0.0938 (13)
  • 0.094 (11)
  • 0.126 (11)
  • 0.1563 (4)
  • 0.1575 (7)
  • 0.312 (6)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (16)
  • 241 (4)
  • CL4 (19)
  • CM2 (21)
  • CM3 (19)
  • CM4 (8)
  • CPX (23)
  • CW2 (10)
  • CW2015 (16)
  • CW5025 (18)
  • GX (13)
  • HK1500 (14)
  • HT2 (10)
  • HTX (4)
  • K060 (4)
  • K090 (23)
  • K1 (13)
  • K10M (25)
  • K10P (16)
  • K10U (6)
  • K15U (12)
  • K20K (25)
  • K21 (13)
  • K25M (12)
  • K25P (19)
  • K313 (25)
  • K35P (13)
  • K420 (17)
  • K45 (4)
  • K68 (23)
  • KB1340 (4)
  • KB1345 (4)
  • KB1610 (6)
  • KB1625 (4)
  • KB1630 (4)
  • KB5610 (6)
  • KB5625 (4)
  • KB5630 (4)
  • KB9610 (12)
  • KB9640 (6)
  • KBH10 (12)
  • KBH10B (10)
  • KBH20 (12)
  • KBH20B (10)
  • KBK35 (4)
  • KC210 (19)
  • KC250 (17)
  • KC5010 (25)
  • KC5025 (25)
  • KC5410 (25)
  • KC5510 (25)
  • KC5525 (12)
  • KC710 (4)
  • KC720 (17)
  • KC722 (4)
  • KC730 (19)
  • KC7310 (25)
  • KC732 (10)
  • KC8050 (25)
  • KC810 (25)
  • KC850 (25)
  • KC9010 (25)
  • KC9025 (25)
  • KC910 (25)
  • KC9105 (18)
  • KC9110 (25)
  • KC9120 (25)
  • KC9125 (25)
  • KC9140 (25)
  • KC9145 (25)
  • KC9210 (6)
  • KC9215 (25)
  • KC9225 (25)
  • KC9240 (25)
  • KC9240NEW (25)
  • KC9245 (25)
  • KC9315 (25)
  • KC9320 (25)
  • KC9325 (25)
  • KC935 (25)
  • KC950 (25)
  • KC990 (25)
  • KCK05 (25)
  • KCK05B (25)
  • KCK15 (25)
  • KCK15B (25)
  • KCK20 (25)
  • KCK20B (25)
  • KCM15 (25)
  • KCM15B (18)
  • KCM25 (25)
  • KCM25B (25)
  • KCM35 (25)
  • KCM35B (25)
  • KCP05 (16)
  • KCP05B (12)
  • KCP10 (25)
  • KCP10B (25)
  • KCP25 (25)
  • KCP25B (25)
  • KCP30 (25)
  • KCP30B (25)
  • KCP40 (25)
  • KCP40B (25)
  • KCPK05 (25)
  • KCS10 (4)
  • KCS10B (25)
  • KCU10 (25)
  • KCU25 (25)
  • KD050 (4)
  • KD081 (4)
  • KD100 (4)
  • KD120 (4)
  • KD1400 (6)
  • KD1405 (4)
  • KD1425 (6)
  • KM1 (11)
  • KMF (4)
  • KT1120 (4)
  • KT125 (10)
  • KT150 (4)
  • KT175 (10)
  • KT315 (12)
  • KT325 (10)
  • KU10T (12)
  • KU30T (25)
  • KY1310 (10)
  • KY1320 (18)
  • KY1540 (6)
  • KY1615 (16)
  • KY2000 (10)
  • KY2100 (4)
  • KY3000 (23)
  • KY3400 (19)
  • KY3500 (25)
  • KY4000 (8)
  • KY4300 (10)
  • KY4400 (18)
  • KYHK15B (18)
  • KYK10 (6)
  • KYK25 (12)
  • KYK35 (25)
  • KYS25 (6)
  • KYS30 (8)
  • NL200 (10)
  • NL250 (25)
  • NL300 (23)
  • NL400 (12)
  • NL920 (12)
  • P25 (4)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (10)
  • SP0819 (25)
  • SP3019 (19)
  • SP4019 (10)
  • SPADAP (9)
  • SPN4W2 (7)
  • THM (13)
  • THM-X (10)
  • THMF-X (4)
  • TN10P (18)
  • TN10U (12)
  • TN15M (25)
  • TN15U (12)
  • TN2000 (21)
  • TN20K (25)
  • TN20P (25)
  • TN30M (25)
  • TN30P (25)
  • TN4000 (21)
  • TN5015 (25)
  • TN5020 (25)
  • TN5105 (12)
  • TN5120 (25)
  • TN6010 (10)
  • TN6025 (12)
  • TN7005 (12)
  • TN7010 (25)
  • TN7015 (25)
  • TN7025 (25)
  • TN7035 (25)
  • TN7105 (12)
  • TN7110 (18)
  • TN7115 (25)
  • TN7125 (25)
  • TN7135 (25)
  • TN8025 (25)
  • TTI15 (10)
  • TTM09 (7)
  • TTR (4)
  • TTR-X (7)
  • TTS (19)
  • TTX (10)
  • W00342 (7)
  • WBH10C (10)
  • WBH10P (4)
  • WBH10U (4)
  • WBH20P (10)
  • WBH25P (4)
  • WBH25U (10)
  • WBH30P (4)
  • WBK40U (4)
  • WBK45U (10)
  • WDN00U (4)
  • WDN25U (6)
  • WK05CT (25)
  • WK15CT (12)
  • WK20CT (25)
  • WM15CT (25)
  • WM25CT (25)
  • WM35CT (25)
  • WP05CT (6)
  • WP15CT (25)
  • WP25CT (25)
  • WP35CT (25)
  • WS10PT (25)
  • WS25PT (25)
  • WU10HT (18)
  • X00511 (4)
Hand Of Tool
  • L (1)
  • N (1)
  • R (1)
Wiper Insert
  • N (25)
  • Y (14)
Minimum Axial Groove Diameter
  • 4.3307 (4)
  • 4.331 (8)
  • 4.921 (2)
  • 4.9213 (8)
to
Minimum Axial Groove Diameter
  • 110.0 (12)
  • 125.0 (10)
to
Cutting Direction
  • S (3)
Rake Angle Style
  • DOUBLE NEGATIVE (2)
  • NEGATIVE-ZERO (1)
Maximum Bore Depth
  • 64.4 (2)
  • 65.0 (20)
to
Maximum Bore Depth
  • 2.5354 (2)
  • 2.559 (10)
  • 2.5591 (10)
to
Front-End
Clamp Style
  • P (25)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (10)
  • D-DIAMOND/RHOMBIC 55 (6)
  • S-SQUARE 90 (7)
  • W-TRIGON 80 (2)
Insert Geometry
Cutting Tool Material
  • B H (12)
  • B L (12)
  • C A (25)
  • C N (25)
  • D P (12)
  • H T (12)
  • H W (25)
Back-End
Connection Type
  • TAPER SHANK (3)
System Size
  • PSC63 (3)
Back-End Diameter
  • 2.48 (10)
  • 2.4803 (15)
to
Back-End Diameter
  • 63.0 (25)
to
other
Platform
  • PSC63 (25)
Tool Unit
  • M (25)
Over All Length [L]
  • 52.0 (2)
  • 65.0 (23)
to
Over All Length [L]
  • 2.0472 (2)
  • 2.559 (10)
  • 2.5591 (13)
to
Insert Hand
  • N (25)
obsoleteFacet
  • false (25)
  • true (25)
Cutting Condition Material
  • H-All (18)
  • K-All (25)
  • K1 (4)
  • M-All (25)
  • N-All (25)
  • P-All (25)
  • S-All (25)
  • S2 (18)
  • S4 (4)
No filters matching ""
View Products in
Metric
Inch
PSC63

Cutting Units • P-Clamping
(6 Products)
  • Shank - PSCShank - PSC
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6340778 PSC63PCLNL12 PSC63PCLNL12 65.0000 2.559 45.0000 1.771 110.0000 4.330 CN..120408/CN..432 1.80
    6340779 PSC63PCLNL16 PSC63PCLNL16 65.0000 2.559 45.0000 1.771 125.0000 4.921 CN..160612/CN..543 1.76
      6340780 PSC63PCLNL19 PSC63PCLNL19 65.0000 2.559 45.0000 1.771 125.0000 4.921 CN..190612/CN..643 1.76
        6340801 PSC63PCLNR12 PSC63PCLNR12 65.0000 2.559 45.0000 1.771 110.0000 4.330 CN..120408/CN..432 1.80
          6340802 PSC63PCLNR16 PSC63PCLNR16 65.0000 2.559 45.0000 1.771 125.0000 4.921 CN..160612/CN..543 1.76
            6340803 PSC63PCLNR19 PSC63PCLNR19 65.0000 2.559 45.0000 1.771 125.0000 4.921 CN..190612/CN..643 1.76
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              PSC63

              Cutting Units • P-Clamping
              (4 Products)
              • Shank - PSCShank - PSC
              • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
              • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
              • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
              • Multi Coolant TurningMulti Coolant Turning
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
              6340043 PSC63PCLNL12HPC PSC63PCLNL12HPC 65.0000 2.559 45.0000 1.772 110.0000 4.331 CN..120408/CN..432 1.58
                6340045 PSC63PCLNL16HPC PSC63PCLNL16HPC 65.0000 2.559 45.0000 1.772 125.0000 4.921 CN..160612/CN..543 1.55
                  6340042 PSC63PCLNR12HPC PSC63PCLNR12HPC 65.0000 2.559 45.0000 1.772 110.0000 4.331 CN..120408/CN..432 1.58
                    6340044 PSC63PCLNR16HPC PSC63PCLNR16HPC 65.0000 2.559 45.0000 1.772 125.0000 4.921 CN..160612/CN..543 1.55
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      PSC63

                      Cutting Units • P-Clamp
                      (2 Products)
                      • Shank - PSCShank - PSC
                      • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                      • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                      6340806 PSC63PDJNL15 PSC63PDJNL15 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150608/DN..442 1.76
                        6340807 PSC63PDJNR15 PSC63PDJNR15 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150608/DN..442 1.76
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          PSC63

                          Cutting Units • P-Clamp
                          (2 Products)
                          • Shank - PSCShank - PSC
                          • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
                          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
                          • Multi Coolant TurningMulti Coolant Turning
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                          6340047 PSC63PDJNL15HPC PSC63PDJNL15HPC 65.0000 2.559 45.0000 1.772 110.0000 4.331 DN..150608/DN..442 1.22
                            6340046 PSC63PDJNR15HPC PSC63PDJNR15HPC 65.0000 2.559 45.0000 1.772 110.0000 4.331 DN..150608/DN..442 1.22
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              Qty
                              PSC63

                              Cutting Units • P-Clamping
                              (2 Products)
                              • Shank - PSCShank - PSC
                              • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                              • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
                              • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
                              • Multi Coolant TurningMulti Coolant Turning
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                              6340049 PSC63PDUNL15HPC PSC63PDUNL15HPC 65.0000 2.559 45.0000 1.772 110.0000 4.331 DN..150608/DN..442 1.46
                                6340048 PSC63PDUNR15HPC PSC63PDUNR15HPC 65.0000 2.559 45.0000 1.772 110.0000 4.331 DN..150608/DN..442 1.46
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  PSC63

                                  Cutting Units • P-Clamp
                                  (1 Products)
                                  • Shank - PSCShank - PSC
                                  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                                  6340817 PSC63PSDNN19 PSC63PSDNN19 65.0000 2.559 0.0000 .0000 SN..190612/SN..643 1.40
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty
                                    PSC63

                                    Cutting Units • P-Clamp
                                    (2 Products)
                                    • Shank - PSCShank - PSC
                                    • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                    • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                    View Products
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                    6340809 PSC63PSKNL19 PSC63PSKNL19 65.0000 2.559 45.0000 1.771 125.0000 4.921 SN..190612/SN..643 1.87
                                      6340811 PSC63PSKNR19 PSC63PSKNR19 65.0000 2.559 45.0000 1.771 125.0000 4.921 SN..190612/SN..643 1.87
                                        List price:
                                        Discount: %
                                        Your price::
                                        Replacement This item is not available
                                        Replacement Product This item may be available through a distributor
                                        Qty
                                        PSC63

                                        Cutting Units • P-Clamping
                                        (2 Products)
                                        • Shank - PSCShank - PSC
                                        • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                        • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                        View Products
                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                                        6340812 PSC63PSRNL19 PSC63PSRNL19 65.0000 2.559 35.0000 1.378 SN..190612/SN..643 1.87
                                          6340813 PSC63PSRNR19 PSC63PSRNR19 65.0000 2.559 35.0000 1.378 SN..190612/SN..643 1.87
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty
                                            PSC63

                                            Cutting Units • P-Clamping
                                            (2 Products)
                                            • Shank - PSCShank - PSC
                                            • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                            • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [L1S] Secondary Tool Length [L1S] Secondary Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                            6340814 PSC63PSSNL19 PSC63PSSNL19 52.0000 2.047 64.4000 2.535 45.0000 1.771 125.0000 4.921 SN..190612/SN..643 1.41
                                              6340815 PSC63PSSNR19 PSC63PSSNR19 52.0000 2.047 64.4000 2.535 45.0000 1.771 125.0000 4.921 SN..190612/SN..643 1.41
                                                List price:
                                                Discount: %
                                                Your price::
                                                Replacement This item is not available
                                                Replacement Product This item may be available through a distributor
                                                Qty
                                                PSC63

                                                Cutting Units • P-Clamping
                                                (2 Products)
                                                • Shank - PSCShank - PSC
                                                • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                                • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
                                                • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
                                                • Multi Coolant TurningMulti Coolant Turning
                                                View Products
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                                6340101 PSC63PWLNL08HPC PSC63PWLNL08HPC 65.0000 2.559 45.0000 1.772 110.0000 4.331 WN..080408/WN..432 1.58
                                                  6340050 PSC63PWLNR08HPC PSC63PWLNR08HPC 65.0000 2.559 45.0000 1.772 110.0000 4.331 WN..080408/WN..432 1.58
                                                    List price:
                                                    Discount: %
                                                    Your price::
                                                    Replacement This item is not available
                                                    Replacement Product This item may be available through a distributor
                                                    Qty
                                                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                    You are about to create a duplicate . Do you want to proceed?
                                                    You are about to delete Do you want to proceed?
                                                    What would you like to rename your to?
                                                    Please enter a valid name
                                                    Please enter a name for the duplicate
                                                    Please enter a valid name
                                                    You are about to add to your My Solutions page. Do you want to proceed?
                                                    Please enter a valid name
                                                    Send a copy of

                                                    Please enter a valid Email
                                                    Please enter a valid name

                                                    We have found the following CAD Drawings

                                                    Select the files you are looking for and download them all at once

                                                    You should be logged to see your dashboard information
                                                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                    item(s) successfully added to the cart
                                                    View Cart