COVID-19: How WIDIA is responding
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (41)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (41)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (41)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (41)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (41)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (41)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (41)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (41)
  • M Stainless Steel (41)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (41)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (41)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (41)
  • K Cast Iron (41)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (41)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (41)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (41)
  • N Non-Ferrous Materials (41)
    • N1
      Wrought Aluminum
      (39)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (39)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (41)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (39)
    • N6
      Carbon, Graphite Composites, CFRP
      (36)
    • N7
      MMC's
      (39)
  • S High-Temp Alloys (41)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (41)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (41)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (41)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (41)
  • H Hardened Materials (33)
    • H1
      Hardened Materials 44-48 HRC
      (33)
    • H2
      Hardened Materials 48-55 HRC
      (33)
    • H3
      Hardened Materials 56-60 HRC
      (33)
    • H4
      Hardened Materials >60 HRC
      (31)
Applications
  • Back Boring Back Boring (41)
  • Cut-Off Cut-Off (41)
  • Deep Grooving Deep Grooving (41)
  • Face Grooving Face Grooving (41)
  • Facing Facing (41)
  • Grooving Grooving (41)
  • ID Facing ID Facing (41)
  • ID Grooving ID Grooving (41)
  • ID Thread Turning ID Thread Turning (41)
  • Multiple Direction Cutting Multiple Direction Cutting (41)
  • OD Thread Turning OD Thread Turning (41)
  • Plunge Turning Plunge Turning (11)
  • Profiling Profiling (20)
  • TRN Boring TRN Boring (41)
  • Turning Turning (41)
Cutting Condition
  • Heavily Interrupted Cut (41)
  • Interrupted (35)
  • Lightly Interrupted Cut (41)
  • Smooth Cut (41)
  • Varying Depth of Cut (41)
Tool Cutting Edge Angle
  • 45.0 (7)
  • 62.5 (2)
  • 72.5 (1)
  • 75.0 (8)
  • 90.0 (2)
  • 93.0 (9)
  • 95.0 (8)
  • 107.5 (4)
to
Connection Style
  • PSC (12)
Cutting Edges Per Insert
  • 1.0 (25)
  • 2.0 (30)
  • 3.0 (2)
  • 4.0 (37)
  • 6.0 (2)
  • 8.0 (24)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.1 (17)
  • 0.102 (16)
  • 0.2 (17)
  • 0.203 (14)
  • 0.34 (5)
  • 0.397 (24)
  • 0.4 (28)
  • 0.406 (12)
  • 0.6 (2)
  • 0.79 (2)
  • 0.792 (9)
  • 0.794 (24)
  • 0.8 (39)
  • 1.188 (4)
  • 1.19 (4)
  • 1.191 (35)
  • 1.2 (39)
  • 1.587 (4)
  • 1.588 (28)
  • 1.6 (35)
  • 2.38 (4)
  • 2.381 (7)
  • 2.4 (17)
  • 3.2 (9)
  • 4.0 (5)
  • 6.35 (2)
to
Corner Radius
  • 0.004 (22)
  • 0.008 (17)
  • 0.0083 (4)
  • 0.013 (5)
  • 0.0156 (28)
  • 0.016 (23)
  • 0.031 (30)
  • 0.0312 (24)
  • 0.0313 (39)
  • 0.0315 (4)
  • 0.0468 (4)
  • 0.0469 (39)
  • 0.047 (35)
  • 0.0472 (4)
  • 0.0516 (2)
  • 0.0625 (35)
  • 0.063 (28)
  • 0.0938 (24)
  • 0.094 (11)
  • 0.126 (9)
  • 0.1563 (4)
  • 0.1575 (5)
  • 0.25 (2)
  • 0.312 (5)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (29)
  • 241 (4)
  • CL4 (20)
  • CM2 (30)
  • CM3 (20)
  • CM4 (10)
  • CPX (31)
  • CW2 (9)
  • CW2015 (29)
  • CW5025 (33)
  • GX (15)
  • HK1500 (17)
  • HT2 (10)
  • HTX (4)
  • K060 (13)
  • K090 (38)
  • K1 (13)
  • K10M (36)
  • K10P (27)
  • K10U (18)
  • K15U (23)
  • K20K (40)
  • K21 (15)
  • K25M (24)
  • K25P (30)
  • K313 (39)
  • K35P (20)
  • K420 (31)
  • K45 (16)
  • K68 (38)
  • KB1340 (7)
  • KB1345 (11)
  • KB1610 (18)
  • KB1625 (16)
  • KB1630 (14)
  • KB5610 (16)
  • KB5625 (16)
  • KB5630 (14)
  • KB9610 (23)
  • KB9640 (11)
  • KBH10 (23)
  • KBH10B (19)
  • KBH20 (23)
  • KBH20B (19)
  • KBK35 (4)
  • KC210 (27)
  • KC250 (26)
  • KC5010 (41)
  • KC5025 (39)
  • KC5410 (36)
  • KC5510 (39)
  • KC5525 (19)
  • KC710 (6)
  • KC720 (27)
  • KC722 (4)
  • KC730 (32)
  • KC7310 (39)
  • KC732 (22)
  • KC8050 (41)
  • KC810 (41)
  • KC850 (41)
  • KC9010 (39)
  • KC9025 (41)
  • KC910 (40)
  • KC9105 (34)
  • KC9110 (41)
  • KC9120 (41)
  • KC9125 (41)
  • KC9125RR (2)
  • KC9140 (41)
  • KC9145 (37)
  • KC9210 (5)
  • KC9215 (39)
  • KC9225 (39)
  • KC9240 (39)
  • KC9240NEW (39)
  • KC9245 (39)
  • KC9315 (41)
  • KC9320 (41)
  • KC9325 (41)
  • KC935 (41)
  • KC950 (40)
  • KC990 (41)
  • KCD25 (7)
  • KCK05 (41)
  • KCK05B (37)
  • KCK15 (41)
  • KCK15B (41)
  • KCK20 (41)
  • KCK20B (41)
  • KCM15 (39)
  • KCM15B (34)
  • KCM25 (39)
  • KCM25B (39)
  • KCM35 (38)
  • KCM35B (28)
  • KCP05 (28)
  • KCP05B (24)
  • KCP10 (41)
  • KCP10B (41)
  • KCP25 (41)
  • KCP25B (41)
  • KCP30 (41)
  • KCP30B (35)
  • KCP40 (35)
  • KCP40B (37)
  • KCPK05 (39)
  • KCS10 (4)
  • KCS10B (39)
  • KCU10 (41)
  • KCU25 (39)
  • KD050 (16)
  • KD081 (16)
  • KD100 (14)
  • KD120 (16)
  • KD1400 (16)
  • KD1405 (14)
  • KD1425 (16)
  • KM1 (11)
  • KMF (4)
  • KT1120 (5)
  • KT125 (21)
  • KT150 (16)
  • KT175 (21)
  • KT315 (24)
  • KT325 (10)
  • KT5020 (3)
  • KTP10 (7)
  • KU10T (24)
  • KU30T (41)
  • KY1310 (21)
  • KY1320 (33)
  • KY1540 (17)
  • KY1615 (31)
  • KY2000 (21)
  • KY2100 (13)
  • KY3000 (36)
  • KY3400 (30)
  • KY3500 (38)
  • KY4000 (13)
  • KY4300 (19)
  • KY4400 (33)
  • KYHK15B (33)
  • KYK10 (15)
  • KYK25 (25)
  • KYK35 (38)
  • KYS25 (17)
  • KYS30 (19)
  • NL200 (9)
  • NL250 (39)
  • NL300 (26)
  • NL400 (14)
  • NL920 (22)
  • P25 (6)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (10)
  • SP0819 (26)
  • SP0A00 (2)
  • SP3019 (21)
  • SP4019 (14)
  • SP4036 (3)
  • SP4093 (3)
  • SP61EJ (2)
  • SPADAP (9)
  • SPN4W2 (5)
  • SPSREJ (2)
  • THM (15)
  • THM-X (11)
  • THMF-X (6)
  • TN10P (32)
  • TN10U (23)
  • TN15M (36)
  • TN15U (23)
  • TN2000 (22)
  • TN20K (40)
  • TN20P (41)
  • TN30M (37)
  • TN30P (35)
  • TN4000 (22)
  • TN5015 (29)
  • TN5020 (27)
  • TN5105 (21)
  • TN5120 (34)
  • TN6010 (19)
  • TN6025 (11)
  • TN7005 (19)
  • TN7010 (36)
  • TN7015 (36)
  • TN7025 (36)
  • TN7035 (28)
  • TN7105 (12)
  • TN7110 (22)
  • TN7115 (34)
  • TN7125 (29)
  • TN7135 (28)
  • TN8025 (34)
  • TTI15 (10)
  • TTM09 (7)
  • TTR (6)
  • TTR-X (5)
  • TTS (20)
  • TTX (9)
  • W00342 (5)
  • WBH10C (19)
  • WBH10P (14)
  • WBH10U (16)
  • WBH20P (19)
  • WBH25P (14)
  • WBH25U (18)
  • WBH30P (14)
  • WBK40U (7)
  • WBK45U (16)
  • WDN00U (11)
  • WDN25U (16)
  • WK05CT (41)
  • WK15CT (15)
  • WK20CT (41)
  • WM15CT (39)
  • WM25CT (39)
  • WM35CT (39)
  • WP05CT (6)
  • WP15CT (41)
  • WP20TT (1)
  • WP25CT (41)
  • WP35CT (41)
  • WS10PT (37)
  • WS25PT (39)
  • WU10HT (34)
  • X00511 (4)
Hand Of Tool
  • L (4)
  • N (4)
  • R (4)
Wiper Insert
  • N (41)
  • Y (13)
Minimum Axial Groove Diameter
  • 3.189 (3)
  • 4.3307 (18)
  • 4.9213 (8)
to
Minimum Axial Groove Diameter
  • 81.0 (3)
  • 110.0 (18)
  • 125.0 (8)
to
Cutting Direction
  • S (12)
Rake Angle Style
  • DOUBLE NEGATIVE (8)
  • NEGATIVE-ZERO (4)
Maximum Bore Depth
  • 52.0 (2)
  • 54.0 (2)
  • 56.0 (2)
  • 65.0 (18)
to
Maximum Bore Depth
  • 2.0472 (2)
  • 2.126 (2)
  • 2.2047 (2)
  • 2.5591 (18)
to
Front-End
Clamp Style
  • D (41)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (12)
  • D-DIAMOND/RHOMBIC 55 (13)
  • R-ROUND (2)
  • S-SQUARE 90 (9)
  • V-DIAMOND/RHOMBIC 35 (3)
  • W-TRIGON 80 (2)
Insert Geometry
Cutting Tool Material
  • B H (26)
  • B L (23)
  • C A (40)
  • C N (38)
  • D P (21)
  • H T (24)
  • H W (41)
Back-End
Connection Type
  • TAPER SHANK (12)
System Size
  • PSC63 (12)
Back-End Diameter
  • 2.4803 (41)
to
Back-End Diameter
  • 63.0 (41)
to
other
Platform
  • PSC63 (41)
Tool Unit
  • M (41)
Over All Length [L]
  • 52.0 (2)
  • 54.0 (2)
  • 56.0 (2)
  • 65.0 (34)
  • 70.0 (1)
to
Over All Length [L]
  • 2.0472 (2)
  • 2.126 (2)
  • 2.2047 (2)
  • 2.5591 (34)
  • 2.7559 (1)
to
Insert Hand
  • N (41)
obsoleteFacet
  • false (41)
  • true (41)
Cutting Condition Material
  • H-All (33)
  • K-All (41)
  • K1 (7)
  • M-All (39)
  • N-All (37)
  • P-All (41)
  • S-All (39)
  • S2 (33)
  • S4 (14)
No filters matching ""
View Products in
Metric
Inch
PSC63

Cutting Units • D-Clamping
(6 Products)
  • Shank - PSCShank - PSC
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6339686 PSC63DCLNL12 PSC63DCLNL12 65.0000 2.559 45.0000 1.771 110.0000 4.330 CN..120408/CN..432 1.60
    6339687 PSC63DCLNL16 PSC63DCLNL16 65.0000 2.559 45.0000 1.771 125.0000 4.921 CN..160612/CN..543 1.64
      6339688 PSC63DCLNL19 PSC63DCLNL19 65.0000 2.559 45.0000 1.771 125.0000 4.921 CN..190612/CN..643 1.66
        6340001 PSC63DCLNR12 PSC63DCLNR12 65.0000 2.559 45.0000 1.771 110.0000 4.330 CN..120408/CN..432 1.60
          6340002 PSC63DCLNR16 PSC63DCLNR16 65.0000 2.559 45.0000 1.771 125.0000 4.921 CN..160612/CN..543 1.64
            6340003 PSC63DCLNR19 PSC63DCLNR19 65.0000 2.559 45.0000 1.771 125.0000 4.921 CN..190612/CN..643 1.66
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              PSC63

              Cutting Units • D-Clamp
              (6 Products)
              • Shank - PSCShank - PSC
              • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
              • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
              6340004 PSC63DCRNL12 PSC63DCRNL12 65.0000 2.559 35.0000 1.378 CN..120408/CN..432 1.38
                6340005 PSC63DCRNL16 PSC63DCRNL16 65.0000 2.559 35.0000 1.378 CN..160612/CN..543 1.66
                  6340006 PSC63DCRNL19 PSC63DCRNL19 65.0000 2.559 35.0000 1.378 CN..190612/CN..643 1.59
                    6340007 PSC63DCRNR12 PSC63DCRNR12 65.0000 2.559 35.0000 1.378 CN..120408/CN..432 1.37
                      6340008 PSC63DCRNR16 PSC63DCRNR16 65.0000 2.559 35.0000 1.378 CN..160612/CN..543 1.66
                        6340009 PSC63DCRNR19 PSC63DCRNR19 65.0000 2.559 35.0000 1.378 CN..190612/CN..643 1.59
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          PSC63

                          Cutting Units • D-Clamping
                          (4 Products)
                          • Shank - PSCShank - PSC
                          • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                          • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                          6340075 PSC63DDHNL1504 PSC63DDHNL1504 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150408/DN..432 1.10
                            6340074 PSC63DDHNL1506 PSC63DDHNL1506 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150608/DN..442 1.60
                              6340077 PSC63DDHNR1504 PSC63DDHNR1504 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150408/DN..432 1.59
                                6340076 PSC63DDHNR1506 PSC63DDHNR1506 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150608/DN..442 1.59
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  PSC63

                                  Cutting Units • D-Clamping
                                  (3 Products)
                                  • Shank - PSCShank - PSC
                                  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                  6340078 PSC63DDJNL1504 PSC63DDJNL1504 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150408/DN..432 1.31
                                    6340079 PSC63DDJNR11 PSC63DDJNR11 65.0000 2.559 45.0000 1.771 81.0000 3.189 DN..110408/DN..332 1.48
                                      6340080 PSC63DDJNR1504 PSC63DDJNR1504 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150408/DN..432 1.31
                                        List price:
                                        Discount: %
                                        Your price::
                                        Replacement This item is not available
                                        Replacement Product This item may be available through a distributor
                                        Qty
                                        PSC63

                                        Cutting Units • D-Clamping
                                        (2 Products)
                                        • Shank - PSCShank - PSC
                                        • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                        • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                        View Products
                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                                        6340877 PSC63DDNN1504 PSC63DDNN1504 65.0000 2.559 0.0000 .0000 DN..150412/DN..433 1.31
                                          6340876 PSC63DDNN1506 PSC63DDNN1506 65.0000 2.559 0.0000 .0000 DN..150612/DN..443 1.10
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty
                                            PSC63

                                            Cutting Units • D-Clamping
                                            (4 Products)
                                            • Shank - PSCShank - PSC
                                            • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                            • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                            6340132 PSC63DDUNL1504 PSC63DDUNL1504 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150408/DN..432 1.31
                                              6340131 PSC63DDUNL1506 PSC63DDUNL1506 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150608/DN..442 1.31
                                                6340134 PSC63DDUNR1504 PSC63DDUNR1504 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150408/DN..432 1.31
                                                  6340133 PSC63DDUNR1506 PSC63DDUNR1506 65.0000 2.559 45.0000 1.771 110.0000 4.330 DN..150608/DN..442 1.31
                                                    List price:
                                                    Discount: %
                                                    Your price::
                                                    Replacement This item is not available
                                                    Replacement Product This item may be available through a distributor
                                                    Qty
                                                    PSC63

                                                    Cutting Units • D-Clamping
                                                    (2 Products)
                                                    • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                                    • Shank - PSCShank - PSC
                                                    • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                                    View Products
                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                                    6340895 PSC63DRSNL12 PSC63DRSNL12 65.0000 2.559 45.0000 1.771 110.0000 4.330 RN..120400/RN..43 1.15
                                                      6340878 PSC63DRSNR12 PSC63DRSNR12 65.0000 2.559 45.0000 1.771 110.0000 4.330 RN..120400/RN..43 1.20
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        Qty
                                                        PSC63

                                                        Cutting Units • D-Clamping
                                                        (1 Products)
                                                        • Shank - PSCShank - PSC
                                                        • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                                        • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                                                        6341390 PSC63DSDNN19 PSC63DSDNN19 70.0000 2.755 0.0000 .0000 SN..190612/SN..643 1.49
                                                          List price:
                                                          Discount: %
                                                          Your price::
                                                          Replacement This item is not available
                                                          Replacement Product This item may be available through a distributor
                                                          Qty
                                                          PSC63

                                                          Cutting Units • D-Clamping
                                                          (2 Products)
                                                          • Shank - PSCShank - PSC
                                                          • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                                          • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                                                          6340879 PSC63DSRNL19 PSC63DSRNL19 65.0000 2.559 35.0000 1.378 SN..190612/SN..643 1.34
                                                            6340880 PSC63DSRNR19 PSC63DSRNR19 65.0000 2.559 35.0000 1.378 SN..190612/SN..643 1.32
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              Qty
                                                              PSC63

                                                              Cutting Units • D-Clamping
                                                              (6 Products)
                                                              • Shank - PSCShank - PSC
                                                              • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                                              • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                                              View Products
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [L1S] Secondary Tool Length [L1S] Secondary Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                                              6340893 PSC63DSSNL12 PSC63DSSNL12 56.0000 2.204 64.3000 2.531 45.0000 1.771 110.0000 4.330 SN..120408/SN..432 1.34
                                                                6340892 PSC63DSSNL15 PSC63DSSNL15 54.0000 2.126 64.2000 2.527 45.0000 1.771 125.0000 4.921 SN..150608/SN..543 1.37
                                                                  6340891 PSC63DSSNL19 PSC63DSSNL19 52.0000 2.047 64.4000 2.535 45.0000 1.771 125.0000 4.921 SN..190612/SN..643 1.38
                                                                    6341413 PSC63DSSNR12 PSC63DSSNR12 56.0000 2.204 64.3000 2.531 45.0000 1.771 110.0000 4.330 SN..120408/SN..432 1.34
                                                                      6341412 PSC63DSSNR15 PSC63DSSNR15 54.0000 2.126 64.2000 2.527 45.0000 1.771 125.0000 4.921 SN..150608/SN..542 1.37
                                                                        6341411 PSC63DSSNR19 PSC63DSSNR19 52.0000 2.047 64.4000 2.535 45.0000 1.771 125.0000 4.921 SN..190612/SN..643 1.38
                                                                          List price:
                                                                          Discount: %
                                                                          Your price::
                                                                          Replacement This item is not available
                                                                          Replacement Product This item may be available through a distributor
                                                                          Qty
                                                                          PSC63

                                                                          Cutting Units • D-Clamping
                                                                          (2 Products)
                                                                          • Shank - PSCShank - PSC
                                                                          • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                                                          • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                                                          View Products
                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                                                          6340896 PSC63DVJNL16 PSC63DVJNL16 65.0000 2.559 45.0000 1.771 81.0000 3.189 VN..160408/VN..332 1.34
                                                                            6340894 PSC63DVJNR16 PSC63DVJNR16 65.0000 2.559 45.0000 1.771 81.0000 3.189 VN..160408/VN..332 1.34
                                                                              List price:
                                                                              Discount: %
                                                                              Your price::
                                                                              Replacement This item is not available
                                                                              Replacement Product This item may be available through a distributor
                                                                              Qty
                                                                              PSC63

                                                                              Cutting Units • D-Clamping
                                                                              (1 Products)
                                                                              • Shank - PSCShank - PSC
                                                                              • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                                                              • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                                                              View Products
                                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                                                                              6341414 PSC63DVVNN16 PSC63DVVNN16 65.0000 2.559 0.0000 .0000 VN..160408/VN..332 1.25
                                                                                List price:
                                                                                Discount: %
                                                                                Your price::
                                                                                Replacement This item is not available
                                                                                Replacement Product This item may be available through a distributor
                                                                                Qty
                                                                                PSC63

                                                                                Cutting Units • D-Clamping
                                                                                (2 Products)
                                                                                • Shank - PSCShank - PSC
                                                                                • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                                                                • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                                                                View Products
                                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                                                                6341415 PSC63DWLNL08 PSC63DWLNL08 65.0000 2.559 45.0000 1.771 110.0000 4.330 WN..080408/WN..432 1.66
                                                                                  6341416 PSC63DWLNR08 PSC63DWLNR08 65.0000 2.559 45.0000 1.771 110.0000 4.330 WN..080408/WN..432 1.66
                                                                                    List price:
                                                                                    Discount: %
                                                                                    Your price::
                                                                                    Replacement This item is not available
                                                                                    Replacement Product This item may be available through a distributor
                                                                                    Qty
                                                                                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                                    You are about to create a duplicate . Do you want to proceed?
                                                                                    You are about to delete Do you want to proceed?
                                                                                    What would you like to rename your to?
                                                                                    Please enter a valid name
                                                                                    Please enter a name for the duplicate
                                                                                    Please enter a valid name
                                                                                    You are about to add to your My Solutions page. Do you want to proceed?
                                                                                    Please enter a valid name
                                                                                    Send a copy of

                                                                                    Please enter a valid Email
                                                                                    Please enter a valid name

                                                                                    We have found the following CAD Drawings

                                                                                    Select the files you are looking for and download them all at once

                                                                                    You should be logged to see your dashboard information
                                                                                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                                    item(s) successfully added to the cart
                                                                                    View Cart