COVID-19: How WIDIA is responding

KM4X63™ • HPC • High Pressure Coolant Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (12)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (12)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (12)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (12)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (12)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (12)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (12)
  • M Stainless Steel (12)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (12)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (12)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (12)
  • K Cast Iron (12)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (12)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (12)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (12)
  • N Non-Ferrous Materials (12)
    • N1
      Wrought Aluminum
      (12)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (12)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (7)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (12)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (12)
    • N6
      Carbon, Graphite Composites, CFRP
      (12)
    • N7
      MMC's
      (12)
  • S High-Temp Alloys (12)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (12)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (12)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (12)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (12)
  • H Hardened Materials (12)
    • H1
      Hardened Materials 44-48 HRC
      (12)
    • H2
      Hardened Materials 48-55 HRC
      (12)
    • H3
      Hardened Materials 56-60 HRC
      (12)
    • H4
      Hardened Materials >60 HRC
      (11)
Applications
  • Back Boring Back Boring (12)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (4)
  • Blind Hole Finishing Blind Hole Finishing (4)
  • Chamfer Turning Chamfer Turning (4)
  • Cut-Off Cut-Off (12)
  • Deep Grooving Deep Grooving (12)
  • Face Grooving Face Grooving (12)
  • Facing Facing (12)
  • Grooving Grooving (12)
  • ID Facing ID Facing (8)
  • ID Grooving ID Grooving (12)
  • ID Thread Turning ID Thread Turning (12)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • OD Thread Turning OD Thread Turning (12)
  • Plunge Turning Plunge Turning (12)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (12)
  • Threading Threading (12)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (4)
  • Through Hole Finishing Through Hole Finishing (4)
  • Turning Turning (12)
Cutting Condition
  • Heavily Interrupted Cut (12)
  • Interrupted (8)
  • Lightly Interrupted Cut (12)
  • Smooth Cut (12)
  • Varying Depth of Cut (12)
Tool Cutting Edge Angle
  • 0.0 (2)
  • 48.0 (1)
  • 49.683 (2)
  • 50.0 (2)
  • 72.5 (1)
  • 95.0 (4)
to
Cutting Edges Per Insert
  • 1.0 (9)
  • 2.0 (11)
  • 4.0 (9)
  • 8.0 (6)
to
Corner configuration
Corner Radius
  • 0.038 (2)
  • 0.1 (7)
  • 0.102 (6)
  • 0.2 (7)
  • 0.203 (4)
  • 0.34 (2)
  • 0.397 (8)
  • 0.4 (11)
  • 0.406 (2)
  • 0.792 (6)
  • 0.794 (9)
  • 0.8 (11)
  • 1.188 (4)
  • 1.19 (4)
  • 1.191 (8)
  • 1.2 (11)
  • 1.587 (4)
  • 1.588 (6)
  • 1.6 (8)
  • 2.38 (2)
  • 2.4 (2)
  • 3.2 (2)
  • 6.0 (1)
to
Corner Radius
  • 0.0015 (2)
  • 0.004 (9)
  • 0.008 (7)
  • 0.0083 (4)
  • 0.013 (2)
  • 0.0156 (11)
  • 0.0158 (1)
  • 0.016 (7)
  • 0.031 (6)
  • 0.0312 (9)
  • 0.0313 (11)
  • 0.0315 (7)
  • 0.0468 (4)
  • 0.0469 (11)
  • 0.047 (9)
  • 0.0472 (4)
  • 0.0625 (8)
  • 0.063 (8)
  • 0.0938 (2)
  • 0.094 (2)
  • 0.126 (2)
  • 0.1563 (4)
  • 0.2362 (1)
  • 0.312 (2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (9)
  • 241 (4)
  • AC5 (1)
  • CL4 (6)
  • CM2 (8)
  • CM3 (7)
  • CM4 (6)
  • CM5 (1)
  • CPX (9)
  • CW2 (6)
  • CW2015 (8)
  • CW5025 (8)
  • GX (4)
  • HCK10 (1)
  • HK1500 (8)
  • HK35 (1)
  • HT2 (9)
  • HTX (7)
  • HWK15 (1)
  • K060 (4)
  • K090 (8)
  • K1 (4)
  • K10M (11)
  • K10P (9)
  • K10U (6)
  • K15U (8)
  • K20K (9)
  • K21 (4)
  • K25M (6)
  • K25P (6)
  • K313 (12)
  • K35P (2)
  • K420 (6)
  • K45 (4)
  • K68 (12)
  • KB1340 (4)
  • KB1345 (5)
  • KB1610 (6)
  • KB1625 (6)
  • KB1630 (5)
  • KB5610 (6)
  • KB5625 (6)
  • KB5630 (6)
  • KB9610 (8)
  • KB9640 (4)
  • KBH10 (8)
  • KBH10B (6)
  • KBH20 (9)
  • KBH20B (6)
  • KBK35 (4)
  • KC210 (6)
  • KC250 (6)
  • KC5010 (12)
  • KC5020P (2)
  • KC5025 (12)
  • KC5410 (12)
  • KC5510 (8)
  • KC5525 (6)
  • KC710 (4)
  • KC720 (9)
  • KC722 (4)
  • KC730 (10)
  • KC7310 (8)
  • KC732 (10)
  • KC8050 (12)
  • KC810 (11)
  • KC850 (12)
  • KC9010 (8)
  • KC9025 (11)
  • KC910 (12)
  • KC9105 (11)
  • KC9110 (12)
  • KC9120 (8)
  • KC9125 (12)
  • KC9140 (8)
  • KC9145 (8)
  • KC9210 (2)
  • KC9215 (8)
  • KC9225 (11)
  • KC9240 (12)
  • KC9240NEW (12)
  • KC9245 (8)
  • KC9315 (12)
  • KC9320 (12)
  • KC9325 (9)
  • KC935 (11)
  • KC950 (10)
  • KC990 (8)
  • KCD25 (3)
  • KCK05 (11)
  • KCK05B (10)
  • KCK15 (12)
  • KCK15B (12)
  • KCK20 (12)
  • KCK20B (12)
  • KCM15 (11)
  • KCM15B (11)
  • KCM25 (12)
  • KCM25B (12)
  • KCM35 (11)
  • KCM35B (8)
  • KCP05 (11)
  • KCP05B (8)
  • KCP10 (12)
  • KCP10B (12)
  • KCP15 (2)
  • KCP25 (12)
  • KCP25B (12)
  • KCP30 (12)
  • KCP30B (10)
  • KCP40 (8)
  • KCP40B (10)
  • KCPK05 (9)
  • KCS10 (8)
  • KCS10B (12)
  • KCU10 (12)
  • KCU25 (12)
  • KD050 (6)
  • KD081 (6)
  • KD100 (6)
  • KD120 (4)
  • KD1400 (6)
  • KD1405 (6)
  • KD1425 (6)
  • KM1 (4)
  • KMF (4)
  • KT1120 (2)
  • KT125 (6)
  • KT150 (4)
  • KT175 (8)
  • KT315 (9)
  • KT325 (9)
  • KTP10 (2)
  • KU10 (2)
  • KU10T (9)
  • KU30T (11)
  • KY1310 (6)
  • KY1320 (8)
  • KY1540 (4)
  • KY1615 (9)
  • KY2000 (6)
  • KY2100 (4)
  • KY3000 (8)
  • KY3400 (6)
  • KY3500 (8)
  • KY4000 (6)
  • KY4300 (6)
  • KY4400 (8)
  • KYHK15B (8)
  • KYK10 (4)
  • KYK25 (6)
  • KYK35 (8)
  • KYS25 (4)
  • KYS30 (4)
  • MC2 (1)
  • NL200 (6)
  • NL250 (8)
  • NL300 (9)
  • NL400 (6)
  • NL920 (7)
  • P25 (4)
  • PB100 (4)
  • PB170 (5)
  • PB250 (5)
  • PB300 (4)
  • PD100 (1)
  • PD50 (1)
  • PS5 (6)
  • SP0819 (8)
  • SP0PW3 (1)
  • SP3019 (6)
  • SP4019 (7)
  • THM (8)
  • THM-X (7)
  • THMF-X (4)
  • TN10P (11)
  • TN10U (9)
  • TN15M (11)
  • TN15U (8)
  • TN2000 (9)
  • TN20K (11)
  • TN20P (11)
  • TN30M (11)
  • TN30P (8)
  • TN4000 (8)
  • TN5015 (10)
  • TN5020 (12)
  • TN5105 (7)
  • TN5120 (12)
  • TN6010 (7)
  • TN6025 (6)
  • TN7005 (8)
  • TN7010 (12)
  • TN7015 (12)
  • TN7025 (12)
  • TN7035 (12)
  • TN7105 (10)
  • TN7110 (12)
  • TN7115 (12)
  • TN7125 (12)
  • TN7135 (12)
  • TN8025 (9)
  • TTI15 (9)
  • TTM09 (1)
  • TTR (5)
  • TTS (6)
  • TTX (8)
  • W00342 (1)
  • WBH10C (8)
  • WBH10P (6)
  • WBH10U (6)
  • WBH25P (6)
  • WBH25U (8)
  • WBH30P (6)
  • WBK40U (4)
  • WBK45U (7)
  • WDN00U (4)
  • WDN25U (6)
  • WK05CT (9)
  • WK15CT (9)
  • WK20CT (12)
  • WM15CT (11)
  • WM25CT (11)
  • WM35CT (8)
  • WP05CT (4)
  • WP15CT (12)
  • WP20TT (2)
  • WP25CT (12)
  • WP35CT (12)
  • WS10PT (9)
  • WS25PT (8)
  • WU10HT (12)
  • X00511 (4)
Wiper Insert
  • N (12)
  • Y (2)
Minimum Axial Groove Diameter
  • 3.15 (4)
  • 3.9 (1)
  • 3.937 (7)
to
Minimum Axial Groove Diameter
  • 80.0 (4)
  • 100.0 (8)
to
Maximum Bore Depth
  • 70.0 (4)
  • 115.0 (8)
to
Maximum Bore Depth
  • 2.756 (4)
  • 4.528 (8)
to
Front-End
Clamp Style
  • D (1)
  • P (7)
  • S (4)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (7)
  • D-DIAMOND/RHOMBIC 55 (2)
  • R-ROUND (1)
  • V-DIAMOND/RHOMBIC 35 (2)
Insert Geometry
Cutting Tool Material
  • B H (9)
  • B L (9)
  • C A (9)
  • C N (8)
  • D P (9)
  • H T (10)
  • H W (12)
Back-End
Back-End Diameter
  • 2.5 (12)
to
Back-End Diameter
  • 63.0 (12)
to
other
Platform
  • KM4X63 (12)
Tool Unit
  • M (12)
Over All Length [L]
  • 70.0 (4)
  • 115.0 (8)
to
Over All Length [L]
  • 2.756 (4)
  • 4.528 (8)
to
Insert Hand
  • L (2)
  • N (12)
  • R (3)
obsoleteFacet
  • false (12)
  • true (12)
Cutting Condition Material
  • H-All (12)
  • K-All (12)
  • K1 (4)
  • M-All (12)
  • N-All (12)
  • P-All (12)
  • S-All (12)
  • S4 (6)
No filters matching ""
View Products in
Metric
Inch
  • Shank: KM4X™Shank: KM4X™
  • Multi Coolant TurningMulti Coolant Turning
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
6275084 KM4X63DCMNN12115HPC KM4X63DCMNN12115HPC 115.0000 4.528 0.0000 .0000 CN..120408/CN..432 2.10 4.62
    List price:
    Discount: %
    Your price::
    Replacement This item is not available
    Replacement Product This item may be available through a distributor
    Qty
    KM4X63 Cutting Units HPC

    P-Clamping
    (4 Products)
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
    5720354 KM4X63PCLNL12HPC KM4X63PCLNL12HPC 70.0000 2.756 43.0000 1.693 80.0000 3.150 CN..120408/CN..432 1.51 3.33
      5720356 KM4X63PCLNL16HPC KM4X63PCLNL16HPC 70.0000 2.756 43.0000 1.693 80.0000 3.150 CN..160612/CN..543 1.49 3.28
        5720353 KM4X63PCLNR12HPC KM4X63PCLNR12HPC 70.0000 2.756 43.0000 1.693 80.0000 3.150 CN..120408/CN..432 1.51 3.33
          5720355 KM4X63PCLNR16HPC KM4X63PCLNR16HPC 70.0000 2.756 43.0000 1.693 80.0000 3.150 CN..160612/CN..543 1.49 3.28
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty
            • Shank: KM4X™Shank: KM4X™
            • Multi Coolant TurningMulti Coolant Turning
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
            6275081 KM4X63PCMNN12115HPC KM4X63PCMNN12115HPC 115.0000 4.528 0.0000 .0000 CN..120408/CN..432 2.09 4.60
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              • Shank: KM4X™Shank: KM4X™
              • Multi Coolant TurningMulti Coolant Turning
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              6275082 KM4X63PDMNL15115HPC KM4X63PDMNL15115HPC 115.0000 4.528 0.0000 .0000 DN..150608/DN..442 1.82 4.02
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty
                • Shank: KM4X™Shank: KM4X™
                • Multi Coolant TurningMulti Coolant Turning
                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                6275083 KM4X63PDNNN15115HPC KM4X63PDNNN15115HPC 115.0000 4.528 0.0000 .0000 DN..150608/DN..442 1.95 4.30
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty
                  • Shank: KM4X™Shank: KM4X™
                  • Multi Coolant TurningMulti Coolant Turning
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                  6275085 KM4X63SCMCN12115HPC KM4X63SCMCN12115HPC 115.0000 4.528 0.0000 .0000 CC..120408/CC..432 1.89 4.16
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty
                    • Shank: KM4X™Shank: KM4X™
                    • Multi Coolant TurningMulti Coolant Turning
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                    6275086 KM4X63SRDCN12115HPC KM4X63SRDCN12115HPC 115.0000 4.528 0.0000 .0000 RC..1204M0 1.93 4.25
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      • Shank: KM4X™Shank: KM4X™
                      • Multi Coolant TurningMulti Coolant Turning
                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                      6275087 KM4X63SVMBL16115HPC KM4X63SVMBL16115HPC 115.0000 4.528 0.0000 .0000 VB..160408/VB..332 1.82 4.01
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty
                        • Shank: KM4X™Shank: KM4X™
                        • Multi Coolant TurningMulti Coolant Turning
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                        6275088 KM4X63SVVBN16115HPC KM4X63SVVBN16115HPC 115.0000 4.528 0.0000 .0000 VB..160408/VB..332 1.63 3.60
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                          You are about to create a duplicate . Do you want to proceed?
                          You are about to delete Do you want to proceed?
                          What would you like to rename your to?
                          Please enter a valid name
                          Please enter a name for the duplicate
                          Please enter a valid name
                          You are about to add to your My Solutions page. Do you want to proceed?
                          Please enter a valid name
                          Send a copy of

                          Please enter a valid Email
                          Please enter a valid name

                          We have found the following CAD Drawings

                          Select the files you are looking for and download them all at once

                          You should be logged to see your dashboard information
                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                          item(s) successfully added to the cart
                          View Cart