COVID-19: How WIDIA is responding

KM63XMZ™ Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (21)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (21)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (21)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (21)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (21)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (21)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (21)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (21)
  • M Stainless Steel (21)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (21)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (21)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (21)
  • K Cast Iron (21)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (21)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (21)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (21)
  • N Non-Ferrous Materials (21)
    • N1
      Wrought Aluminum
      (21)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (21)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (21)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (21)
    • N6
      Carbon, Graphite Composites, CFRP
      (21)
    • N7
      MMC's
      (21)
  • S High-Temp Alloys (21)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (21)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (21)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (21)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (21)
  • H Hardened Materials (21)
    • H1
      Hardened Materials 44-48 HRC
      (21)
    • H2
      Hardened Materials 48-55 HRC
      (21)
    • H3
      Hardened Materials 56-60 HRC
      (21)
    • H4
      Hardened Materials >60 HRC
      (21)
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Facing Facing (21)
  • Multiple Direction Cutting Multiple Direction Cutting (20)
  • Plunge Turning Plunge Turning (5)
  • Profiling Profiling (21)
  • TRN Boring TRN Boring (16)
  • Turning Turning (21)
Cutting Condition
  • Heavily Interrupted Cut (21)
  • Interrupted (16)
  • Lightly Interrupted Cut (21)
  • Smooth Cut (21)
  • Varying Depth of Cut (21)
Tool Cutting Edge Angle
  • 48.0 (6)
  • 49.783 (1)
  • 50.0 (2)
  • 93.0 (6)
  • 95.0 (6)
to
Connection Style
  • KM (5)
Cutting Edges Per Insert
  • 1.0 (19)
  • 2.0 (19)
  • 3.0 (2)
  • 4.0 (18)
  • 6.0 (2)
  • 8.0 (11)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.038 (1)
  • 0.1 (16)
  • 0.102 (12)
  • 0.2 (16)
  • 0.203 (13)
  • 0.34 (3)
  • 0.397 (19)
  • 0.4 (21)
  • 0.406 (7)
  • 0.6 (2)
  • 0.792 (8)
  • 0.794 (19)
  • 0.8 (21)
  • 1.188 (3)
  • 1.19 (5)
  • 1.191 (20)
  • 1.2 (21)
  • 1.587 (5)
  • 1.588 (13)
  • 1.6 (16)
  • 2.38 (2)
  • 2.381 (4)
  • 2.4 (2)
  • 3.2 (2)
to
Corner Radius
  • 0.0015 (1)
  • 0.004 (19)
  • 0.008 (16)
  • 0.0083 (5)
  • 0.013 (3)
  • 0.0156 (21)
  • 0.016 (18)
  • 0.031 (18)
  • 0.0312 (19)
  • 0.0313 (21)
  • 0.0315 (6)
  • 0.0468 (3)
  • 0.0469 (21)
  • 0.047 (16)
  • 0.0472 (5)
  • 0.0625 (16)
  • 0.063 (12)
  • 0.0938 (6)
  • 0.094 (2)
  • 0.126 (2)
  • 0.1563 (5)
  • 0.312 (3)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (18)
  • 241 (5)
  • CL4 (8)
  • CM2 (18)
  • CM3 (8)
  • CM4 (7)
  • CPX (14)
  • CW2 (8)
  • CW2015 (18)
  • CW5025 (20)
  • GX (5)
  • HK1500 (11)
  • HT2 (9)
  • HTX (6)
  • K060 (9)
  • K090 (18)
  • K1 (5)
  • K10M (21)
  • K10P (20)
  • K10U (16)
  • K15U (19)
  • K20K (20)
  • K21 (5)
  • K25M (18)
  • K25P (18)
  • K313 (21)
  • K35P (8)
  • K420 (15)
  • K45 (13)
  • K68 (19)
  • KB1340 (5)
  • KB1345 (9)
  • KB1610 (16)
  • KB1625 (14)
  • KB1630 (13)
  • KB5610 (16)
  • KB5625 (14)
  • KB5630 (14)
  • KB9610 (19)
  • KB9640 (7)
  • KBH10 (19)
  • KBH10B (16)
  • KBH20 (19)
  • KBH20B (16)
  • KBK35 (5)
  • KC210 (12)
  • KC250 (11)
  • KC5010 (21)
  • KC5020P (1)
  • KC5025 (21)
  • KC5410 (21)
  • KC5510 (20)
  • KC5525 (14)
  • KC710 (5)
  • KC720 (18)
  • KC722 (5)
  • KC730 (18)
  • KC7310 (20)
  • KC732 (18)
  • KC8050 (21)
  • KC810 (21)
  • KC850 (21)
  • KC9010 (20)
  • KC9025 (21)
  • KC910 (21)
  • KC9105 (21)
  • KC9110 (21)
  • KC9120 (20)
  • KC9125 (21)
  • KC9140 (20)
  • KC9145 (16)
  • KC9210 (3)
  • KC9215 (20)
  • KC9225 (21)
  • KC9240 (21)
  • KC9240NEW (21)
  • KC9245 (20)
  • KC9315 (21)
  • KC9320 (21)
  • KC9325 (20)
  • KC935 (21)
  • KC950 (21)
  • KC990 (20)
  • KCD25 (5)
  • KCK05 (21)
  • KCK05B (21)
  • KCK15 (21)
  • KCK15B (21)
  • KCK20 (21)
  • KCK20B (21)
  • KCM15 (21)
  • KCM15B (21)
  • KCM25 (21)
  • KCM25B (21)
  • KCM35 (21)
  • KCM35B (12)
  • KCP05 (21)
  • KCP05B (19)
  • KCP10 (21)
  • KCP10B (21)
  • KCP15 (1)
  • KCP25 (21)
  • KCP25B (21)
  • KCP30 (21)
  • KCP30B (16)
  • KCP40 (16)
  • KCP40B (17)
  • KCPK05 (20)
  • KCS10 (6)
  • KCS10B (21)
  • KCU10 (21)
  • KCU25 (21)
  • KD050 (14)
  • KD081 (14)
  • KD100 (14)
  • KD120 (13)
  • KD1400 (16)
  • KD1405 (14)
  • KD1425 (16)
  • KM1 (5)
  • KMF (5)
  • KT1120 (8)
  • KT125 (16)
  • KT150 (13)
  • KT175 (17)
  • KT315 (19)
  • KT325 (9)
  • KT5020 (4)
  • KTP10 (5)
  • KU10 (1)
  • KU10T (19)
  • KU30T (21)
  • KY1310 (13)
  • KY1320 (20)
  • KY1540 (9)
  • KY1615 (18)
  • KY2000 (11)
  • KY2100 (9)
  • KY3000 (18)
  • KY3400 (13)
  • KY3500 (20)
  • KY4000 (11)
  • KY4300 (11)
  • KY4400 (20)
  • KYHK15B (20)
  • KYK10 (11)
  • KYK25 (13)
  • KYK35 (20)
  • KYS25 (9)
  • KYS30 (11)
  • NL200 (8)
  • NL250 (20)
  • NL300 (10)
  • NL400 (9)
  • NL920 (14)
  • P25 (5)
  • PB100 (5)
  • PB170 (5)
  • PB250 (5)
  • PB300 (5)
  • PS5 (8)
  • SP0819 (12)
  • SP3019 (9)
  • SP4019 (7)
  • SP4036 (4)
  • SP4093 (4)
  • THM (6)
  • THM-X (8)
  • THMF-X (5)
  • TN10P (21)
  • TN10U (19)
  • TN15M (21)
  • TN15U (19)
  • TN2000 (11)
  • TN20K (21)
  • TN20P (21)
  • TN30M (21)
  • TN30P (16)
  • TN4000 (11)
  • TN5015 (12)
  • TN5020 (13)
  • TN5105 (14)
  • TN5120 (17)
  • TN6010 (16)
  • TN6025 (10)
  • TN7005 (15)
  • TN7010 (17)
  • TN7015 (17)
  • TN7025 (17)
  • TN7035 (13)
  • TN7105 (11)
  • TN7110 (13)
  • TN7115 (17)
  • TN7125 (13)
  • TN7135 (13)
  • TN8025 (16)
  • TTI15 (9)
  • TTR (5)
  • TTS (8)
  • TTX (9)
  • WBH10C (17)
  • WBH10P (14)
  • WBH10U (14)
  • WBH25P (14)
  • WBH25U (13)
  • WBH30P (14)
  • WBK40U (5)
  • WBK45U (12)
  • WDN00U (9)
  • WDN25U (16)
  • WK05CT (20)
  • WK15CT (11)
  • WK20CT (21)
  • WM15CT (21)
  • WM25CT (21)
  • WM35CT (20)
  • WP05CT (7)
  • WP15CT (21)
  • WP20TT (1)
  • WP25CT (21)
  • WP35CT (21)
  • WS10PT (20)
  • WS25PT (20)
  • WU10HT (21)
  • X00511 (5)
Hand Of Tool
  • L (2)
  • R (3)
Wiper Insert
  • N (21)
  • Y (7)
Minimum Axial Groove Diameter
  • 3.386 (7)
  • 3.937 (9)
to
Minimum Axial Groove Diameter
  • 86.0 (7)
  • 100.0 (9)
to
Cutting Direction
  • S (5)
Rake Angle Style
  • DOUBLE NEGATIVE (5)
Maximum Bore Depth
  • 60.0 (7)
  • 115.0 (9)
to
Maximum Bore Depth
  • 2.362 (7)
  • 4.528 (9)
to
Front-End
Clamp Style
  • M (17)
  • P (3)
  • S (1)
Adapter Front-End
  • CARTRIDGE MOUNT (2)
  • CUTOFF SUPPORT BLADE (4)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (7)
  • D-DIAMOND/RHOMBIC 55 (7)
  • V-DIAMOND/RHOMBIC 35 (5)
  • W-TRIGON 80 (2)
Front End Type
  • KMC - Cartridge Mount Kenna (2)
  • PMK - Prismatic Adapter Kenna (4)
Front End Style
  • KMC-29WID/MAN SerratedBlade Mt (2)
  • PMK02 Cutoff Sup Bld A1-A3 (4)
Gage Length
  • 18.0000 (2)
  • 53.7900 (2)
Gage Length
  • 0.7090 (2)
  • 2.1180 (2)
Insert Geometry
Cutting Tool Material
  • B H (19)
  • B L (19)
  • C A (20)
  • C N (20)
  • D P (19)
  • H T (19)
  • H W (21)
Back-End
Connection Type
  • TAPER SHANK (5)
System Size
  • KM63TS (2)
  • KM63XMZ (9)
Back-End Diameter
  • 2.4803 (21)
to
Back-End Diameter
  • 63.0 (21)
to
other
Grade
  • WG (2)
Platform
  • KM63 (26)
  • KM63XMZ (1)
Tool Unit
  • M (27)
Over All Length [L]
  • 60.0 (12)
  • 115.0 (9)
to
Over All Length [L]
  • 2.362 (7)
  • 2.3622 (5)
  • 4.528 (9)
to
Insert Hand
  • L (1)
  • N (21)
  • R (1)
obsoleteFacet
  • false (27)
  • true (27)
Cutting Condition Material
  • H-All (21)
  • K-All (21)
  • K1 (5)
  • M-All (21)
  • N-All (21)
  • P-All (21)
  • S-All (21)
  • S4 (14)
No filters matching ""
View Products in
Metric
Inch
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [B1] Front Clearance [B1] Front Clearance [LPR] Protruding Length [LPR] Protruding Length [F] F Dimension [F] F Dimension [H2] Overall Height [H2] Overall Height [HW] Shank Height [HW] Shank Height Cartridge Size Cartridge Weight Kilograms Weight Pounds
1982387 KM63XMZBSLF4Y KM63XMZBSLF4Y 37.6000 1.480 104.6000 4.118 21.9200 .8630 69.0750 2.719 26.0000 1.023 26 A2BN..26... 2.31 5.10
    1831634 KM63XMZBSLF5Y KM63XMZBSLF5Y 40.0000 1.574 123.8000 4.874 39.9200 1.571 71.4750 2.814 32.0000 1.259 32 A2BN..32... 3.63 7.99
      1982386 KM63XMZBSR4Y KM63XMZBSR4Y 37.6000 1.480 104.6000 4.118 21.9200 .8630 69.0750 2.719 26.0000 1.023 26 A2BN..26... 2.27 5.00
        1831638 KM63XMZBSR5Y KM63XMZBSR5Y 40.0000 1.574 123.8000 4.874 39.9200 1.571 71.4750 2.814 32.0000 1.259 32 A2BN..32... 3.64 8.04
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          KM63XMZ™ Cutting Units

          M-Clamping
          (4 Products)
          • Shank - KM-XMZShank - KM-XMZ
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
          3103485 KM63XMZMCLNLF12Y KM63XMZMCLNLF12Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..120408/CN..432 1.24 2.73
            3103486 KM63XMZMCLNLF16Y KM63XMZMCLNLF16Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..160612/CN..543 1.24 2.74
              1551813 KM63XMZMCLNR12Y KM63XMZMCLNR12Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..120408/CN..432 1.24 2.73
                1603738 KM63XMZMCLNR16Y KM63XMZMCLNR16Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..160612/CN..543 1.24 2.74
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty
                  KM63XMZ™ Cutting Units

                  M-Clamping Centerline
                  (1 Products)
                  • Shank - KM-XMZShank - KM-XMZ
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                  3180556 KM63XMZMCMNNF12115Y KM63XMZMCMNNF12115Y 115.0000 4.528 0.0000 .0000 CN..120408/CN..432 2.07 4.57
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty
                    KM63XMZ™ Cutting Units

                    M-Clamping
                    (2 Products)
                    • Shank - KM-XMZShank - KM-XMZ
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                    3103488 KM63XMZMDJNLF1504Y KM63XMZMDJNLF1504Y 60.0000 2.362 43.0000 1.692 DN..150408/DN..432 1.07 2.36
                      3103487 KM63XMZMDJNR1504Y KM63XMZMDJNR1504Y 60.0000 2.362 43.0000 1.692 DN..150408/DN..432 1.07 2.36
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty
                        KM63XMZ™ Cutting Units

                        M-Clamping Centerline
                        (4 Products)
                        • Shank - KM-XMZShank - KM-XMZ
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                        3487458 KM63XMZMDMNLF1504115Y KM63XMZMDMNLF1504115Y 115.0000 4.528 0.0000 .0000 DN..150408/DN..432 1.87 4.11
                          3487459 KM63XMZMDMNLF1506115Y KM63XMZMDMNLF1506115Y 115.0000 4.528 0.0000 .0000 DN..150608/DN..442 1.86 4.10
                            3487461 KM63XMZMDMNR1504115Y KM63XMZMDMNR1504115Y 115.0000 4.528 0.0000 .0000 DN..150408/DN..432 1.88 4.14
                              3487462 KM63XMZMDMNR1506115Y KM63XMZMDMNR1506115Y 115.0000 4.528 0.0000 .0000 DN..150608/DN..442 1.88 4.13
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor
                                Qty
                                KM63XMZ™ Cutting Units

                                M-Clamping
                                (2 Products)
                                • Shank - KM-XMZShank - KM-XMZ
                                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                3103490 KM63XMZMVJNLF16Y KM63XMZMVJNLF16Y 60.0000 2.362 43.0000 1.692 VN..160408/VN..332 1.05 2.32
                                  3103489 KM63XMZMVJNR16Y KM63XMZMVJNR16Y 60.0000 2.362 43.0000 1.692 VN..160408/VN..332 1.05 2.32
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty
                                    KM63XMZ™ Cutting Units

                                    M-Clamping Centerline
                                    (2 Products)
                                    • Shank - KM-XMZShank - KM-XMZ
                                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                    View Products
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                    3487460 KM63XMZMVMNLF16115Y KM63XMZMVMNLF16115Y 115.0000 4.528 0.0000 .0000 VN..160408/VN..332 1.97 4.35
                                      3487473 KM63XMZMVMNR16115Y KM63XMZMVMNR16115Y 115.0000 4.528 0.0000 .0000 VN..160408/VN..332 1.97 4.35
                                        List price:
                                        Discount: %
                                        Your price::
                                        Replacement This item is not available
                                        Replacement Product This item may be available through a distributor
                                        Qty
                                        • Shank - KM-XMZShank - KM-XMZ
                                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                        View Products
                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                        3487571 KM63XMZMWMNLF08115Y KM63XMZMWMNLF08115Y 115.0000 4.528 0.0000 .0000 WN..080408/WN..432 2.02 4.46
                                          3487572 KM63XMZMWMNR08115Y KM63XMZMWMNR08115Y 115.0000 4.528 0.0000 .0000 WN..080408/WN..432 2.03 4.47
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty
                                            KM63XMZ™ Cutting Units

                                            P-Clamping
                                            (2 Products)
                                            • Shank - KM-XMZShank - KM-XMZ
                                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                            2231264 KM63XMZPCLNLF12Y KM63XMZPCLNLF12Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..120408/CN..432 1.23 2.71
                                              2231263 KM63XMZPCLNR12Y KM63XMZPCLNR12Y 60.0000 2.362 43.0000 1.692 86.0000 3.386 CN..120408/CN..432 1.23 2.71
                                                List price:
                                                Discount: %
                                                Your price::
                                                Replacement This item is not available
                                                Replacement Product This item may be available through a distributor
                                                Qty
                                                KM63XMZ™ Cutting Units

                                                P-Clamping
                                                (1 Products)
                                                • Shank - KM-XMZShank - KM-XMZ
                                                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                View Products
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                2231265 KM63XMZPDJNR15Y KM63XMZPDJNR15Y 60.0000 2.362 43.0000 1.692 DN..150608/DN..442 1.04 2.29
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty
                                                  KM63XMZ™ Cutting Units

                                                  S-Clamping • Cut-Off Blocks for Cut-Off Blades
                                                  (1 Products)
                                                  • Shank - KM-XMZShank - KM-XMZ
                                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                  2231270 KM63XMZSVJBLF16Y KM63XMZSVJBLF16Y 60.0000 2.362 43.0000 1.692 VB..160408/VB..332 1.07 2.35
                                                    List price:
                                                    Discount: %
                                                    Your price::
                                                    Replacement This item is not available
                                                    Replacement Product This item may be available through a distributor
                                                    Qty
                                                    KM63XMZ™ Cutting Units

                                                    WMT™ SLS Grooving and Cut-Off
                                                    (2 Products)
                                                    • Shank - KM-XMZShank - KM-XMZ
                                                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                    View Products
                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [L1] Gage Length [L1] Gage Length [F] F Dimension [F] F Dimension Weight Kilograms Weight Pounds
                                                    3949661 KM63XMZWGMELF55MY KM63XMZWGMELF55MY WG 53.7900 2.118 1.5200 .0600 1.24 2.73
                                                      3949660 KM63XMZWGMER55MY KM63XMZWGMER55MY WG 53.7900 2.118 1.5200 .0600 1.24 2.73
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        Qty
                                                        If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                        You are about to create a duplicate . Do you want to proceed?
                                                        You are about to delete Do you want to proceed?
                                                        What would you like to rename your to?
                                                        Please enter a valid name
                                                        Please enter a name for the duplicate
                                                        Please enter a valid name
                                                        You are about to add to your My Solutions page. Do you want to proceed?
                                                        Please enter a valid name
                                                        Send a copy of

                                                        Please enter a valid Email
                                                        Please enter a valid name

                                                        We have found the following CAD Drawings

                                                        Select the files you are looking for and download them all at once

                                                        You should be logged to see your dashboard information
                                                        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                        item(s) successfully added to the cart
                                                        View Cart