COVID-19: How WIDIA is responding
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (6)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (6)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6)
  • M Stainless Steel (6)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • K Cast Iron (6)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (6)
  • N Non-Ferrous Materials (6)
    • N1
      Wrought Aluminum
      (6)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (6)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (6)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6)
    • N6
      Carbon, Graphite Composites, CFRP
      (6)
    • N7
      MMC's
      (6)
  • S High-Temp Alloys (6)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (6)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (6)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
    • H2
      Hardened Materials 48-55 HRC
      (6)
    • H3
      Hardened Materials 56-60 HRC
      (6)
    • H4
      Hardened Materials >60 HRC
      (6)
Applications
  • Back Boring Back Boring (6)
  • Facing Facing (6)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (6)
  • Turning Turning (6)
Cutting Condition
  • Heavily Interrupted Cut (6)
  • Lightly Interrupted Cut (6)
  • Smooth Cut (6)
  • Varying Depth of Cut (6)
Tool Cutting Edge Angle
  • 90.0 (2)
  • 93.0 (2)
  • 95.0 (2)
to
Connection Style
  • KM (6)
Cutting Edges Per Insert
  • 1.0 (4)
  • 2.0 (4)
  • 3.0 (2)
  • 4.0 (2)
to
Corner configuration
Corner Radius
  • 0.03 (2)
  • 0.038 (3)
  • 0.1 (5)
  • 0.2 (6)
  • 0.203 (2)
  • 0.394 (1)
  • 0.397 (4)
  • 0.4 (6)
  • 0.794 (6)
  • 0.8 (6)
  • 1.191 (2)
  • 1.2 (6)
to
Corner Radius
  • 0.001 (2)
  • 0.0015 (3)
  • 0.004 (5)
  • 0.0078 (2)
  • 0.0079 (2)
  • 0.008 (6)
  • 0.0155 (1)
  • 0.0156 (6)
  • 0.0158 (3)
  • 0.016 (2)
  • 0.0312 (6)
  • 0.0313 (6)
  • 0.0315 (4)
  • 0.0469 (6)
  • 0.047 (3)
  • 0.0472 (2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • CG5 (1)
  • CM1 (1)
  • GH1 (2)
  • HCK10 (4)
  • HK1500 (2)
  • HK35 (4)
  • HT2 (5)
  • HTX (5)
  • HWK15 (4)
  • K1010P (2)
  • K10M (5)
  • K10P (3)
  • K10U (3)
  • K15U (3)
  • K20K (5)
  • K313 (6)
  • K420 (2)
  • K68 (6)
  • KB1345 (4)
  • KB1610 (2)
  • KB1625 (4)
  • KB1630 (2)
  • KB5610 (3)
  • KB5625 (4)
  • KB5630 (2)
  • KB9610 (4)
  • KBH10 (2)
  • KBH20 (5)
  • KC5010 (6)
  • KC5020P (2)
  • KC5025 (6)
  • KC5410 (6)
  • KC720 (6)
  • KC730 (6)
  • KC732 (6)
  • KC8050 (6)
  • KC810 (6)
  • KC850 (6)
  • KC9010 (3)
  • KC9025 (6)
  • KC910 (6)
  • KC9105 (6)
  • KC9110 (6)
  • KC9120 (4)
  • KC9125 (6)
  • KC9225 (6)
  • KC9240 (6)
  • KC9240NEW (6)
  • KC9315 (6)
  • KC9320 (6)
  • KC9325 (6)
  • KC935 (6)
  • KC950 (4)
  • KC990 (4)
  • KCD25 (6)
  • KCK05 (6)
  • KCK05B (3)
  • KCK15 (6)
  • KCK15B (6)
  • KCK20 (6)
  • KCK20B (6)
  • KCM15 (6)
  • KCM15B (4)
  • KCM25 (6)
  • KCM25B (6)
  • KCM35 (6)
  • KCM35B (3)
  • KCP05 (6)
  • KCP10 (6)
  • KCP10B (6)
  • KCP25 (6)
  • KCP25B (6)
  • KCP30 (6)
  • KCP30B (2)
  • KCS10 (6)
  • KCS10B (5)
  • KCU10 (6)
  • KCU25 (6)
  • KD1400 (4)
  • KD1425 (4)
  • KT125 (2)
  • KT175 (2)
  • KT315 (6)
  • KT325 (5)
  • KTP10 (4)
  • KU10 (2)
  • KU10T (6)
  • KU30T (6)
  • NL300 (2)
  • NL920 (2)
  • PB100 (3)
  • PB170 (3)
  • PB250 (5)
  • PD100 (4)
  • PD50 (4)
  • SP0PW3 (2)
  • SP4019 (2)
  • THM (5)
  • THM-X (4)
  • TN10P (5)
  • TN10U (5)
  • TN15M (5)
  • TN15U (3)
  • TN2000 (4)
  • TN20K (5)
  • TN20P (5)
  • TN30M (5)
  • TN5015 (5)
  • TN5020 (5)
  • TN5105 (5)
  • TN5120 (5)
  • TN6010 (5)
  • TN6025 (3)
  • TN7005 (3)
  • TN7010 (5)
  • TN7015 (5)
  • TN7025 (5)
  • TN7035 (5)
  • TN7105 (5)
  • TN7110 (5)
  • TN7115 (5)
  • TN7125 (5)
  • TN7135 (5)
  • TN8025 (5)
  • TTI15 (2)
  • TTM09 (1)
  • TTR (5)
  • TTX (2)
  • W00160 (1)
  • W00342 (4)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH20P (4)
  • WBH25P (2)
  • WBH25U (3)
  • WBH30P (2)
  • WBK45U (5)
  • WDN25U (4)
  • WK05CT (5)
  • WK15CT (5)
  • WK20CT (6)
  • WM15CT (5)
  • WM25CT (6)
  • WP15CT (6)
  • WP20TT (2)
  • WP25CT (6)
  • WP35CT (4)
  • WS10PT (5)
  • WS25PT (3)
  • WU10HT (5)
Hand Of Tool
  • L (3)
  • R (3)
Wiper Insert
  • N (6)
  • Y (4)
Minimum Axial Groove Diameter
  • 1.5748 (2)
  • 1.9685 (4)
to
Minimum Axial Groove Diameter
  • 40.0 (2)
  • 50.0 (4)
to
Cutting Direction
  • B (2)
  • E (4)
Rake Angle Style
  • NEGATIVE-ZERO (6)
Maximum Bore Depth
  • 112.22 (2)
  • 117.14 (4)
to
Maximum Bore Depth
  • 4.418 (2)
  • 4.612 (4)
to
Boring Bar Material
  • S (6)
Front-End
Clamp Style
  • S (6)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • D-DIAMOND/RHOMBIC 55 (2)
  • T-TRIANGLE 60 (2)
Insert Geometry
Cutting Tool Material
  • B H (6)
  • B L (6)
  • D P (6)
  • H T (6)
  • H W (6)
Back-End
Connection Type
  • TAPER SHANK (6)
System Size
  • KM63TS (6)
Back-End Diameter
  • 2.4803 (6)
to
Back-End Diameter
  • 63.0 (6)
to
other
Platform
  • KM63 (4)
Tool Unit
  • I (6)
  • M (6)
Over All Length [L]
  • 140.0 (6)
to
Over All Length [L]
  • 5.5118 (6)
to
Insert Hand
  • L (2)
  • N (6)
  • R (4)
obsoleteFacet
  • true (6)
  • false (4)
Cutting Condition Material
  • H-All (5)
  • K-All (6)
  • M-All (6)
  • N-All (6)
  • P-All (6)
  • S-All (6)
No filters matching ""
View Products in
Metric
Inch
KM63TS™ Cutting Units

S-Clamping
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
2414895 KM63TSS32LSDUCL11 KM63TSS32LSDUCL11 32.0000 1.259 40.0000 1.574 22.0000 .8661 112.2200 4.418 140.0000 5.511 DC..11T308/DC..3252 1.35 2.98
    2414894 KM63TSS32LSDUCR11 KM63TSS32LSDUCR11 32.0000 1.259 40.0000 1.574 22.0000 .8661 112.2200 4.418 140.0000 5.511 DC..11T308/DC..3252 1.35 2.98
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      KM63TS™ Internal Cutting Units

      S-Clamping
      (2 Products)
      • Shank: KM-TS™ ISO 26622Shank: KM-TS™ ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
      2414909 KM63TSS40LSCLCL12 KM63TSS40LSCLCL12 40.0000 1.574 50.0000 1.968 27.0000 1.063 117.1400 4.612 140.0000 5.511 CC..120408/CC..432 1.70 3.76
        2414908 KM63TSS40LSCLCR12 KM63TSS40LSCLCR12 40.0000 1.574 50.0000 1.968 27.0000 1.063 117.1400 4.612 140.0000 5.511 CC..120408/CC..432 1.71 3.76
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          KM63TS™ Internal Cutting Units

          S-Clamping
          (2 Products)
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
          2414902 KM63TSS40LSTFCL16 KM63TSS40LSTFCL16 40.0000 1.574 50.0000 1.968 27.0000 1.063 117.1400 4.612 140.0000 5.511 TC..16T308/TC..3252 1.71 3.77
            2414901 KM63TSS40LSTFCR16 KM63TSS40LSTFCR16 40.0000 1.574 50.0000 1.968 27.0000 1.063 117.1400 4.612 140.0000 5.511 TC..16T308/TC..3252 1.71 3.77
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              We have found the following CAD Drawings

              Select the files you are looking for and download them all at once

              You should be logged to see your dashboard information
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart