COVID-19: How WIDIA is responding
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (44)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (44)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (44)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (44)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (44)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (44)
  • M Stainless Steel (44)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (44)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (44)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (44)
  • K Cast Iron (44)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (44)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (44)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (44)
  • N Non-Ferrous Materials (44)
    • N1
      Wrought Aluminum
      (44)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (44)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (42)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (44)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (44)
    • N6
      Carbon, Graphite Composites, CFRP
      (44)
    • N7
      MMC's
      (44)
  • S High-Temp Alloys (44)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (44)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (44)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (44)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (44)
  • H Hardened Materials (44)
    • H1
      Hardened Materials 44-48 HRC
      (44)
    • H2
      Hardened Materials 48-55 HRC
      (44)
    • H3
      Hardened Materials 56-60 HRC
      (44)
    • H4
      Hardened Materials >60 HRC
      (44)
Applications
  • Back Boring Back Boring (44)
  • Facing Facing (44)
  • Multiple Direction Cutting Multiple Direction Cutting (44)
  • Profiling Profiling (44)
  • TRN Boring TRN Boring (44)
  • Turning Turning (44)
Cutting Condition
  • Heavily Interrupted Cut (44)
  • Interrupted (44)
  • Lightly Interrupted Cut (44)
  • Smooth Cut (44)
  • Varying Depth of Cut (44)
Tool Cutting Edge Angle
  • 93.0 (17)
  • 95.0 (27)
to
Connection Style
  • KM (44)
Cutting Edges Per Insert
  • 1.0 (42)
  • 2.0 (39)
  • 3.0 (5)
  • 4.0 (39)
  • 6.0 (5)
  • 8.0 (22)
to
Corner configuration
Corner Radius
  • 0.1 (42)
  • 0.102 (37)
  • 0.2 (42)
  • 0.203 (37)
  • 0.397 (42)
  • 0.4 (44)
  • 0.406 (17)
  • 0.6 (5)
  • 0.792 (20)
  • 0.794 (42)
  • 0.8 (44)
  • 1.188 (2)
  • 1.19 (20)
  • 1.191 (44)
  • 1.2 (44)
  • 1.587 (20)
  • 1.588 (44)
  • 1.6 (44)
  • 2.38 (2)
  • 2.381 (17)
  • 2.4 (2)
  • 3.2 (2)
to
Corner Radius
  • 0.004 (42)
  • 0.008 (42)
  • 0.0083 (20)
  • 0.0156 (44)
  • 0.016 (42)
  • 0.031 (42)
  • 0.0312 (42)
  • 0.0313 (44)
  • 0.0315 (20)
  • 0.0468 (2)
  • 0.0469 (44)
  • 0.047 (44)
  • 0.0472 (20)
  • 0.0625 (44)
  • 0.063 (27)
  • 0.0938 (19)
  • 0.094 (2)
  • 0.126 (2)
  • 0.1563 (20)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (39)
  • 241 (20)
  • CL4 (20)
  • CM2 (39)
  • CM3 (20)
  • CM4 (22)
  • CPX (39)
  • CW2 (20)
  • CW2015 (39)
  • CW5025 (44)
  • GX (20)
  • HK1500 (25)
  • HT2 (20)
  • HTX (20)
  • K060 (37)
  • K090 (39)
  • K1 (20)
  • K10M (44)
  • K10P (44)
  • K10U (42)
  • K15U (42)
  • K20K (44)
  • K21 (20)
  • K25M (42)
  • K25P (42)
  • K313 (44)
  • K35P (24)
  • K420 (39)
  • K45 (37)
  • K68 (39)
  • KB1340 (20)
  • KB1345 (37)
  • KB1610 (42)
  • KB1625 (37)
  • KB1630 (37)
  • KB5610 (42)
  • KB5625 (37)
  • KB5630 (37)
  • KB9610 (42)
  • KB9640 (25)
  • KBH10 (42)
  • KBH10B (37)
  • KBH20 (42)
  • KBH20B (37)
  • KBK35 (20)
  • KC210 (37)
  • KC250 (39)
  • KC5010 (44)
  • KC5025 (44)
  • KC5410 (44)
  • KC5510 (44)
  • KC5525 (42)
  • KC710 (20)
  • KC720 (44)
  • KC722 (20)
  • KC730 (44)
  • KC7310 (44)
  • KC732 (44)
  • KC8050 (44)
  • KC810 (44)
  • KC850 (44)
  • KC9010 (44)
  • KC9025 (44)
  • KC910 (44)
  • KC9105 (44)
  • KC9110 (44)
  • KC9120 (44)
  • KC9125 (44)
  • KC9140 (44)
  • KC9145 (44)
  • KC9215 (44)
  • KC9225 (44)
  • KC9240 (44)
  • KC9240NEW (44)
  • KC9245 (44)
  • KC9315 (44)
  • KC9320 (44)
  • KC9325 (44)
  • KC935 (44)
  • KC950 (44)
  • KC990 (44)
  • KCD25 (17)
  • KCK05 (44)
  • KCK05B (44)
  • KCK15 (44)
  • KCK15B (44)
  • KCK20 (44)
  • KCK20B (44)
  • KCM15 (44)
  • KCM15B (44)
  • KCM25 (44)
  • KCM25B (44)
  • KCM35 (44)
  • KCM35B (27)
  • KCP05 (44)
  • KCP05B (42)
  • KCP10 (44)
  • KCP10B (44)
  • KCP25 (44)
  • KCP25B (44)
  • KCP30 (44)
  • KCP30B (44)
  • KCP40 (44)
  • KCP40B (44)
  • KCPK05 (44)
  • KCS10 (20)
  • KCS10B (44)
  • KCU10 (44)
  • KCU25 (44)
  • KD050 (37)
  • KD081 (37)
  • KD100 (37)
  • KD120 (37)
  • KD1400 (42)
  • KD1405 (37)
  • KD1425 (42)
  • KM1 (20)
  • KMF (20)
  • KT1120 (20)
  • KT125 (37)
  • KT150 (37)
  • KT175 (37)
  • KT315 (42)
  • KT325 (20)
  • KTP10 (17)
  • KU10T (42)
  • KU30T (44)
  • KY1310 (44)
  • KY1320 (44)
  • KY1540 (37)
  • KY1615 (39)
  • KY2000 (39)
  • KY2100 (37)
  • KY3000 (39)
  • KY3400 (44)
  • KY3500 (44)
  • KY4000 (22)
  • KY4300 (39)
  • KY4400 (44)
  • KYHK15B (44)
  • KYK10 (42)
  • KYK25 (44)
  • KYK35 (44)
  • KYS25 (37)
  • KYS30 (42)
  • NL200 (20)
  • NL250 (44)
  • NL300 (22)
  • NL400 (27)
  • NL920 (42)
  • P25 (20)
  • PB100 (20)
  • PB170 (20)
  • PB250 (20)
  • PB300 (20)
  • PS5 (20)
  • SP0819 (27)
  • SP3019 (27)
  • SP4019 (22)
  • THM (20)
  • THM-X (20)
  • THMF-X (20)
  • TN10P (44)
  • TN10U (42)
  • TN15M (44)
  • TN15U (42)
  • TN2000 (25)
  • TN20K (44)
  • TN20P (44)
  • TN30M (44)
  • TN30P (44)
  • TN4000 (25)
  • TN5015 (27)
  • TN5020 (27)
  • TN5105 (42)
  • TN5120 (44)
  • TN6010 (37)
  • TN6025 (25)
  • TN7005 (42)
  • TN7010 (44)
  • TN7015 (44)
  • TN7025 (44)
  • TN7035 (27)
  • TN7105 (25)
  • TN7110 (27)
  • TN7115 (44)
  • TN7125 (27)
  • TN7135 (27)
  • TN8025 (44)
  • TTI15 (20)
  • TTR (20)
  • TTS (20)
  • TTX (20)
  • WBH10C (37)
  • WBH10P (37)
  • WBH10U (37)
  • WBH25P (37)
  • WBH25U (37)
  • WBH30P (37)
  • WBK40U (20)
  • WBK45U (37)
  • WDN00U (37)
  • WDN25U (42)
  • WK05CT (44)
  • WK15CT (25)
  • WK20CT (44)
  • WM15CT (44)
  • WM25CT (44)
  • WM35CT (44)
  • WP05CT (25)
  • WP15CT (44)
  • WP25CT (44)
  • WP35CT (44)
  • WS10PT (44)
  • WS25PT (44)
  • WU10HT (44)
  • X00511 (20)
Hand Of Tool
  • L (22)
  • R (22)
Wiper Insert
  • N (44)
  • Y (42)
Minimum Axial Groove Diameter
  • 1.2598 (13)
  • 1.5748 (13)
  • 1.9685 (14)
  • 1.969 (2)
  • 2.4803 (2)
to
Minimum Axial Groove Diameter
  • 32.0 (13)
  • 40.0 (13)
  • 50.0 (16)
  • 63.0 (2)
to
Cutting Direction
  • B (27)
  • E (6)
Rake Angle Style
  • DOUBLE NEGATIVE (44)
Maximum Bore Depth
  • 38.3 (4)
  • 48.3 (1)
  • 49.22 (2)
  • 60.47 (4)
  • 70.47 (4)
  • 81.26 (4)
  • 87.23 (6)
  • 91.26 (2)
  • 91.28 (2)
  • 96.26 (5)
  • 120.34 (8)
  • 140.0 (2)
to
Maximum Bore Depth
  • 1.5079 (2)
  • 1.508 (2)
  • 1.902 (1)
  • 1.9378 (2)
  • 2.3807 (2)
  • 2.381 (2)
  • 2.774 (2)
  • 2.7744 (2)
  • 3.1992 (2)
  • 3.2 (2)
  • 3.434 (4)
  • 3.4343 (2)
  • 3.593 (2)
  • 3.594 (2)
  • 3.7898 (2)
  • 3.79 (3)
  • 4.7378 (4)
  • 4.738 (4)
  • 5.5118 (2)
to
Boring Bar Material
  • S (44)
Front-End
Clamp Style
  • M (44)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (22)
  • D-DIAMOND/RHOMBIC 55 (17)
  • W-TRIGON 80 (5)
Insert Geometry
Cutting Tool Material
  • B H (42)
  • B L (42)
  • C A (44)
  • C N (44)
  • D P (42)
  • H T (42)
  • H W (44)
Back-End
Connection Type
  • TAPER SHANK (44)
System Size
  • KM50TS (44)
Back-End Diameter
  • 1.9685 (44)
to
Back-End Diameter
  • 50.0 (44)
to
other
Platform
  • KM50 (42)
Tool Unit
  • M (44)
Over All Length [L]
  • 60.0 (4)
  • 70.0 (3)
  • 80.0 (4)
  • 90.0 (4)
  • 100.0 (4)
  • 110.0 (10)
  • 125.0 (5)
  • 140.0 (10)
to
Over All Length [L]
  • 2.3622 (4)
  • 2.7559 (3)
  • 3.1496 (4)
  • 3.5433 (4)
  • 3.937 (4)
  • 4.3307 (8)
  • 4.331 (2)
  • 4.9213 (5)
  • 5.5118 (10)
to
Insert Hand
  • N (44)
obsoleteFacet
  • true (44)
  • false (42)
Cutting Condition Material
  • H-All (44)
  • K-All (44)
  • K1 (20)
  • M-All (44)
  • N-All (44)
  • P-All (44)
  • S-All (44)
  • S4 (37)
No filters matching ""
View Products in
Metric
Inch
KM50TS™ Internal Cutting Units

M-Clamping
(22 Products)
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3753687 KM50TSS25DMCLNL12 KM50TSS25DMCLNL12 32.0000 1.259 17.0000 .6693 38.3000 1.507 60.0000 2.362 CN..120408/CN..432 0.48 1.06
    3753688 KM50TSS25DMCLNR12 KM50TSS25DMCLNR12 32.0000 1.259 17.0000 .6693 38.3000 1.507 60.0000 2.362 CN..120408/CN..432 0.48 1.06
      3753689 KM50TSS25EMCLNL12 KM50TSS25EMCLNL12 32.0000 1.259 17.0000 .6693 49.2200 1.937 70.0000 2.755 CN..120408/CN..432 0.51 1.13
        3753690 KM50TSS25EMCLNR12 KM50TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 49.2200 1.937 70.0000 2.755 CN..120408/CN..432 0.51 1.13
          3753691 KM50TSS25JMCLNL12 KM50TSS25JMCLNL12 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 CN..120408/CN..432 0.67 1.48
            3753692 KM50TSS25JMCLNR12 KM50TSS25JMCLNR12 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 CN..120408/CN..432 0.67 1.48
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM50TS™ Internal Cutting Units

              M-Clamping
              (17 Products)
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
              3753597 KM50TSS25DMDUNL15 KM50TSS25DMDUNL15 32.0000 1.259 17.0000 .6693 38.3000 1.508 60.0000 2.362 DN..150408/DN..432 0.47 1.03
                3753598 KM50TSS25DMDUNR15 KM50TSS25DMDUNR15 32.0000 1.259 17.0000 .6693 38.3000 1.508 60.0000 2.362 DN..150408/DN..432 0.47 1.03
                  3753599 KM50TSS25EMDUNL15 KM50TSS25EMDUNL15 32.0000 1.259 17.0000 .6693 48.3000 1.902 70.0000 2.755 DN..150408/DN..432 0.51 1.11
                    3753600 KM50TSS25JMDUNL15 KM50TSS25JMDUNL15 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 DN..150408/DN..432 0.66 1.45
                      3753601 KM50TSS25JMDUNR15 KM50TSS25JMDUNR15 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 DN..150408/DN..432 0.66 1.46
                        3753602 KM50TSS32FMDUNL15 KM50TSS32FMDUNL15 40.0000 1.574 22.0000 .8661 60.4700 2.381 80.0000 3.149 DN..150408/DN..432 0.66 1.46
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          KM50TS™ Internal Cutting Units

                          M-Clamping
                          (5 Products)
                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                          3747122 KM50TSS25JMWLNL08 KM50TSS25JMWLNL08 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 WN..080408/WN..432 0.67 1.47
                            3747121 KM50TSS25JMWLNR08 KM50TSS25JMWLNR08 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 WN..080408/WN..432 0.67 1.48
                              3747123 KM50TSS32KMWLNR08 KM50TSS32KMWLNR08 40.0000 1.574 22.0000 .8661 96.2600 3.790 125.0000 4.921 WN..080408/WN..432 0.99 2.17
                                3747119 KM50TSS40LMWLNL08 KM50TSS40LMWLNL08 50.0000 1.968 27.0000 1.063 120.3400 4.738 140.0000 5.511 WN..080408/WN..432 1.40 3.08
                                  3747120 KM50TSS40LMWLNR08 KM50TSS40LMWLNR08 50.0000 1.968 27.0000 1.063 120.3400 4.738 140.0000 5.511 WN..080408/WN..432 1.40 3.08
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty
                                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                    You are about to create a duplicate . Do you want to proceed?
                                    You are about to delete Do you want to proceed?
                                    What would you like to rename your to?
                                    Please enter a valid name
                                    Please enter a name for the duplicate
                                    Please enter a valid name
                                    You are about to add to your My Solutions page. Do you want to proceed?
                                    Please enter a valid name
                                    Send a copy of

                                    Please enter a valid Email
                                    Please enter a valid name

                                    We have found the following CAD Drawings

                                    Select the files you are looking for and download them all at once

                                    You should be logged to see your dashboard information
                                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                    item(s) successfully added to the cart
                                    View Cart