COVID-19: How WIDIA is responding
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (65)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (65)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (65)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (65)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (65)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (65)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (65)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (65)
  • M Stainless Steel (65)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (65)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (65)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (65)
  • K Cast Iron (65)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (65)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (65)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (65)
  • N Non-Ferrous Materials (65)
    • N1
      Wrought Aluminum
      (63)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (63)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (25)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (65)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (63)
    • N6
      Carbon, Graphite Composites, CFRP
      (57)
    • N7
      MMC's
      (63)
  • S High-Temp Alloys (65)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (65)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (65)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (65)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (65)
  • H Hardened Materials (57)
    • H1
      Hardened Materials 44-48 HRC
      (57)
    • H2
      Hardened Materials 48-55 HRC
      (57)
    • H3
      Hardened Materials 56-60 HRC
      (57)
    • H4
      Hardened Materials >60 HRC
      (54)
Applications
  • Chamfer Turning Chamfer Turning (27)
  • Facing Facing (57)
  • Multiple Direction Cutting Multiple Direction Cutting (66)
  • Plunge Turning Plunge Turning (27)
  • Profiling Profiling (51)
  • TRN Boring TRN Boring (39)
  • Turning Turning (66)
Cutting Condition
  • Heavily Interrupted Cut (65)
  • Interrupted (56)
  • Lightly Interrupted Cut (65)
  • Smooth Cut (65)
  • Varying Depth of Cut (65)
Tool Cutting Edge Angle
  • 45.0 (7)
  • 62.5 (2)
  • 75.0 (22)
  • 90.0 (5)
  • 93.0 (16)
  • 95.0 (8)
  • 107.5 (6)
to
Connection Style
  • KM (26)
Cutting Edges Per Insert
  • 1.0 (36)
  • 2.0 (39)
  • 3.0 (8)
  • 4.0 (55)
  • 6.0 (8)
  • 8.0 (40)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.1 (21)
  • 0.102 (20)
  • 0.2 (25)
  • 0.203 (23)
  • 0.34 (7)
  • 0.397 (44)
  • 0.4 (50)
  • 0.406 (18)
  • 0.6 (2)
  • 0.79 (10)
  • 0.792 (13)
  • 0.794 (45)
  • 0.8 (63)
  • 1.188 (6)
  • 1.19 (6)
  • 1.191 (59)
  • 1.2 (63)
  • 1.587 (6)
  • 1.588 (39)
  • 1.6 (57)
  • 2.38 (6)
  • 2.381 (7)
  • 2.4 (34)
  • 3.18 (2)
  • 3.2 (10)
  • 4.0 (2)
  • 6.35 (2)
to
Corner Radius
  • 0.004 (28)
  • 0.008 (25)
  • 0.0083 (6)
  • 0.013 (7)
  • 0.0156 (50)
  • 0.016 (44)
  • 0.031 (55)
  • 0.0312 (45)
  • 0.0313 (63)
  • 0.0315 (6)
  • 0.0468 (6)
  • 0.0469 (63)
  • 0.047 (57)
  • 0.0472 (6)
  • 0.0516 (10)
  • 0.0625 (57)
  • 0.063 (49)
  • 0.0938 (41)
  • 0.094 (14)
  • 0.125 (2)
  • 0.126 (8)
  • 0.1563 (6)
  • 0.1575 (2)
  • 0.25 (2)
  • 0.312 (7)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (52)
  • 241 (6)
  • CL4 (33)
  • CM2 (50)
  • CM3 (35)
  • CM4 (26)
  • CPX (48)
  • CW2 (17)
  • CW2015 (52)
  • CW5025 (58)
  • GX (24)
  • HK1500 (35)
  • HT2 (13)
  • HTX (10)
  • K060 (27)
  • K090 (63)
  • K1 (15)
  • K10M (56)
  • K10P (50)
  • K10U (37)
  • K15U (44)
  • K20K (64)
  • K21 (28)
  • K25M (44)
  • K25P (52)
  • K313 (63)
  • K35P (32)
  • K420 (53)
  • K45 (35)
  • K68 (63)
  • KB1340 (16)
  • KB1345 (17)
  • KB1610 (35)
  • KB1625 (33)
  • KB1630 (23)
  • KB5610 (21)
  • KB5625 (33)
  • KB5630 (19)
  • KB9610 (42)
  • KB9640 (20)
  • KBH10 (42)
  • KBH10B (30)
  • KBH20 (42)
  • KBH20B (30)
  • KBK35 (6)
  • KC210 (38)
  • KC250 (37)
  • KC5010 (65)
  • KC5025 (62)
  • KC5410 (57)
  • KC5510 (62)
  • KC5525 (24)
  • KC710 (8)
  • KC720 (46)
  • KC722 (6)
  • KC730 (50)
  • KC7310 (62)
  • KC732 (43)
  • KC8050 (65)
  • KC810 (65)
  • KC850 (65)
  • KC9010 (62)
  • KC9025 (65)
  • KC910 (65)
  • KC9105 (60)
  • KC9110 (65)
  • KC9120 (65)
  • KC9125 (65)
  • KC9125RR (10)
  • KC9140 (65)
  • KC9145 (54)
  • KC9210 (7)
  • KC9215 (62)
  • KC9225 (62)
  • KC9240 (62)
  • KC9240NEW (62)
  • KC9245 (62)
  • KC9315 (64)
  • KC9320 (64)
  • KC9325 (64)
  • KC935 (65)
  • KC950 (65)
  • KC990 (65)
  • KCD25 (7)
  • KCK05 (64)
  • KCK05B (56)
  • KCK15 (64)
  • KCK15B (64)
  • KCK20 (64)
  • KCK20B (64)
  • KCM15 (62)
  • KCM15B (60)
  • KCM25 (62)
  • KCM25B (62)
  • KCM35 (62)
  • KCM35B (47)
  • KCP05 (50)
  • KCP05B (42)
  • KCP10 (65)
  • KCP10B (65)
  • KCP25 (65)
  • KCP25B (64)
  • KCP30 (65)
  • KCP30B (56)
  • KCP40 (56)
  • KCP40B (58)
  • KCPK05 (58)
  • KCS10 (6)
  • KCS10B (56)
  • KCU10 (64)
  • KCU25 (62)
  • KD050 (35)
  • KD081 (35)
  • KD100 (19)
  • KD120 (35)
  • KD1400 (25)
  • KD1405 (19)
  • KD1425 (25)
  • KM1 (24)
  • KMF (6)
  • KT1120 (8)
  • KT125 (42)
  • KT150 (33)
  • KT175 (42)
  • KT315 (44)
  • KT325 (17)
  • KT5020 (10)
  • KTP10 (7)
  • KU10T (44)
  • KU30T (65)
  • KY1310 (41)
  • KY1320 (60)
  • KY1540 (29)
  • KY1615 (55)
  • KY2000 (38)
  • KY2100 (23)
  • KY3000 (61)
  • KY3400 (49)
  • KY3500 (62)
  • KY4000 (28)
  • KY4300 (23)
  • KY4400 (56)
  • KYHK15B (56)
  • KYK10 (29)
  • KYK25 (47)
  • KYK35 (62)
  • KYS25 (27)
  • KYS30 (29)
  • NL200 (13)
  • NL250 (62)
  • NL300 (47)
  • NL400 (19)
  • NL920 (43)
  • P25 (18)
  • PB100 (6)
  • PB170 (6)
  • PB250 (6)
  • PB300 (6)
  • PS5 (13)
  • SP0819 (39)
  • SP0A00 (10)
  • SP3019 (36)
  • SP4019 (28)
  • SP4036 (6)
  • SP4093 (6)
  • SP61EJ (10)
  • SPADAP (6)
  • SPN4W2 (2)
  • SPSREJ (6)
  • THM (26)
  • THM-X (23)
  • THMF-X (20)
  • TN10P (54)
  • TN10U (44)
  • TN15M (56)
  • TN15U (44)
  • TN2000 (37)
  • TN20K (64)
  • TN20P (65)
  • TN30M (56)
  • TN30P (57)
  • TN4000 (37)
  • TN5015 (49)
  • TN5020 (43)
  • TN5105 (38)
  • TN5120 (50)
  • TN6010 (26)
  • TN6025 (19)
  • TN7005 (22)
  • TN7010 (56)
  • TN7015 (56)
  • TN7025 (56)
  • TN7035 (49)
  • TN7105 (19)
  • TN7110 (41)
  • TN7115 (50)
  • TN7125 (49)
  • TN7135 (49)
  • TN8025 (50)
  • TTI15 (13)
  • TTM09 (18)
  • TTR (18)
  • TTR-X (2)
  • TTS (33)
  • TTX (19)
  • W00342 (2)
  • WBH10C (26)
  • WBH10P (19)
  • WBH10U (33)
  • WBH25P (23)
  • WBH25U (34)
  • WBH30P (19)
  • WBK40U (16)
  • WBK45U (24)
  • WDN00U (13)
  • WDN25U (25)
  • WK05CT (64)
  • WK15CT (35)
  • WK20CT (64)
  • WM15CT (62)
  • WM25CT (62)
  • WM35CT (62)
  • WP05CT (8)
  • WP15CT (65)
  • WP25CT (65)
  • WP35CT (65)
  • WS10PT (56)
  • WS25PT (62)
  • WU10HT (60)
  • X00511 (6)
Hand Of Tool
  • L (11)
  • N (3)
  • R (12)
Wiper Insert
  • N (65)
  • Y (22)
Minimum Axial Groove Diameter
  • 2.7559 (1)
  • 2.756 (27)
  • 3.386 (2)
  • 3.543 (4)
  • 3.937 (6)
to
Minimum Axial Groove Diameter
  • 70.0 (28)
  • 86.0 (2)
  • 90.0 (4)
  • 100.0 (6)
to
Cutting Direction
  • S (26)
Rake Angle Style
  • DOUBLE NEGATIVE (24)
  • NEGATIVE-ZERO (2)
Maximum Bore Depth
  • 50.0 (39)
to
Maximum Bore Depth
  • 1.969 (39)
to
Front-End
Clamp Style
  • M (66)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (16)
  • D-DIAMOND/RHOMBIC 55 (15)
  • R-ROUND (2)
  • S-SQUARE 90 (19)
  • T-TRIANGLE 60 (6)
  • V-DIAMOND/RHOMBIC 35 (6)
  • W-TRIGON 80 (2)
Insert Geometry
Cutting Tool Material
  • B H (46)
  • B L (44)
  • C A (65)
  • C N (63)
  • D P (32)
  • H T (44)
  • H W (65)
Back-End
Connection Type
  • TAPER SHANK (26)
System Size
  • KM50TS (26)
Back-End Diameter
  • 1.9685 (66)
to
Back-End Diameter
  • 50.0 (66)
to
other
Platform
  • KM50 (62)
Tool Unit
  • M (66)
Over All Length [L]
  • 50.0 (66)
to
Over All Length [L]
  • 1.9685 (24)
  • 1.969 (42)
to
Insert Hand
  • N (65)
obsoleteFacet
  • true (66)
  • false (62)
Cutting Condition Material
  • H-All (57)
  • K-All (65)
  • K1 (16)
  • M-All (62)
  • N-All (56)
  • P-All (65)
  • S-All (62)
  • S4 (19)
No filters matching ""
View Products in
Metric
Inch
KM50TS™ Cutting Units

M-Clamping
(4 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3738137 KM50TSMCKNL12 KM50TSMCKNL12 50.0000 1.969 35.0000 1.378 70.0000 2.756 CN..120408/CN..432 0.68 1.51
    3738138 KM50TSMCKNL16 KM50TSMCKNL16 50.0000 1.969 35.0000 1.378 70.0000 2.756 CN..160612/CN..543 0.71 1.57
      3738139 KM50TSMCKNR12 KM50TSMCKNR12 50.0000 1.969 35.0000 1.378 70.0000 2.756 CN..120408/CN..432 0.68 1.51
        3738140 KM50TSMCKNR16 KM50TSMCKNR16 50.0000 1.969 35.0000 1.378 70.0000 2.756 CN..160612/CN..543 0.71 1.57
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          KM50TS™ Cutting Units

          M-Clamping
          (6 Products)
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
          3738141 KM50TSMCLNL12 KM50TSMCLNL12 50.0000 1.969 35.0000 1.378 70.0000 2.756 CN..120408/CN..432 0.61 1.35
            3738142 KM50TSMCLNL16 KM50TSMCLNL16 50.0000 1.969 35.0000 1.378 90.0000 3.543 CN..160612/CN..543 0.64 1.41
              3738163 KM50TSMCLNL19 KM50TSMCLNL19 50.0000 1.969 35.0000 1.378 90.0000 3.543 CN..190612/CN..643 0.63 1.39
                3738164 KM50TSMCLNR12 KM50TSMCLNR12 50.0000 1.969 35.0000 1.378 70.0000 2.756 CN..120408/CN..432 0.61 1.35
                  3738165 KM50TSMCLNR16 KM50TSMCLNR16 50.0000 1.969 35.0000 1.378 90.0000 3.543 CN..160612/CN..543 0.64 1.41
                    3738166 KM50TSMCLNR19 KM50TSMCLNR19 50.0000 1.969 35.0000 1.378 90.0000 3.543 CN..190612/CN..643 0.63 1.39
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      KM50TS™ Cutting Units

                      M-Clamping
                      (6 Products)
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                      3738179 KM50TSMCRNL12 KM50TSMCRNL12 50.0000 1.969 30.0000 1.181 CN..120408/CN..432 0.66 1.45
                        3738181 KM50TSMCRNL16 KM50TSMCRNL16 50.0000 1.968 30.0000 1.181 CN..160612/CN..543 0.64 1.41
                          3838384 KM50TSMCRNL19 KM50TSMCRNL19 50.0000 1.968 30.0000 1.181 CN..190612/CN..643 0.66 1.44
                            3738182 KM50TSMCRNR12 KM50TSMCRNR12 50.0000 1.969 30.0000 1.181 CN..120408/CN..432 0.66 1.45
                              3838383 KM50TSMCRNR16 KM50TSMCRNR16 50.0000 1.968 30.0000 1.181 CN..160612/CN..543 0.66 1.45
                                3738183 KM50TSMCRNR19 KM50TSMCRNR19 50.0000 1.968 30.0000 1.181 CN..190612/CN..643 0.66 1.45
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  KM50TS™ Cutting Units

                                  M-Clamping
                                  (5 Products)
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                  3738149 KM50TSMDJNL1504 KM50TSMDJNL1504 50.0000 1.968 35.0000 1.378 DN..150408/DN..432 0.51 1.11
                                    3738150 KM50TSMDJNL1506 KM50TSMDJNL1506 50.0000 1.968 35.0000 1.378 DN..150608/DN..442 0.50 1.11
                                      3738151 KM50TSMDJNR1504 KM50TSMDJNR1504 50.0000 1.968 35.0000 1.378 DN..150408/DN..432 0.50 1.11
                                        3738152 KM50TSMDJNR1506 KM50TSMDJNR1506 50.0000 1.968 35.0000 1.378 DN..150608/DN..442 0.50 1.11
                                          3738153 KM50TSMDJNR1906 KM50TSMDJNR1906 50.0000 1.969 35.0000 1.378 DN..190612/DN..543 0.54 1.20
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty
                                            KM50TS™ Cutting Units

                                            M-Clamping
                                            (2 Products)
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                            3738489 KM50TSMDPNN1504 KM50TSMDPNN1504 50.0000 1.968 0.0000 .0000 DN..150408/DN..432 0.46 1.02
                                              3738509 KM50TSMDPNN1506 KM50TSMDPNN1506 50.0000 1.968 0.0000 .0000 DN..150608/DN..442 0.46 1.02
                                                List price:
                                                Discount: %
                                                Your price::
                                                Replacement This item is not available
                                                Replacement Product This item may be available through a distributor
                                                Qty
                                                KM50TS™ Cutting Units

                                                M-Clamping
                                                (4 Products)
                                                View Products
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                3738515 KM50TSMDQNL1504 KM50TSMDQNL1504 50.0000 1.969 35.0000 1.378 70.0000 2.756 DN..150408/DN..432 0.59 1.30
                                                  3738519 KM50TSMDQNL1506 KM50TSMDQNL1506 50.0000 1.969 35.0000 1.378 70.0000 2.756 DN..150608/DN..442 0.59 1.29
                                                    3738522 KM50TSMDQNR1504 KM50TSMDQNR1504 50.0000 1.969 35.0000 1.378 70.0000 2.756 DN..150408/DN..432 0.59 1.30
                                                      3738524 KM50TSMDQNR1506 KM50TSMDQNR1506 50.0000 1.969 35.0000 1.378 70.0000 2.756 DN..150608/DN..442 0.59 1.29
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        Qty
                                                        KM50TS™ Cutting Units

                                                        M-Clamping
                                                        (4 Products)
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                        3738526 KM50TSMDUNL1504 KM50TSMDUNL1504 50.0000 1.969 35.0000 1.378 70.0000 2.756 DN..150408/DN..432 0.64 1.41
                                                          3738528 KM50TSMDUNL1506 KM50TSMDUNL1506 50.0000 1.969 35.0000 1.378 70.0000 2.756 DN..150608/DN..442 0.64 1.40
                                                            3738529 KM50TSMDUNR1504 KM50TSMDUNR1504 50.0000 1.969 35.0000 1.378 70.0000 2.756 DN..150408/DN..432 0.64 1.41
                                                              3738530 KM50TSMDUNR1506 KM50TSMDUNR1506 50.0000 1.969 35.0000 1.378 70.0000 2.756 DN..150608/DN..442 0.64 1.40
                                                                List price:
                                                                Discount: %
                                                                Your price::
                                                                Replacement This item is not available
                                                                Replacement Product This item may be available through a distributor
                                                                Qty
                                                                KM50TS™ Cutting Units

                                                                M-Clamping
                                                                (2 Products)
                                                                View Products
                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                                3738484 KM50TSMRGNL12 KM50TSMRGNL12 50.0000 1.969 35.0000 1.378 100.0000 3.937 RNMA1204000/RNMA43 0.64 1.41
                                                                  3738485 KM50TSMRGNR12 KM50TSMRGNR12 50.0000 1.969 35.0000 1.378 100.0000 3.937 RNMA1204000/RNMA43 0.64 1.41
                                                                    List price:
                                                                    Discount: %
                                                                    Your price::
                                                                    Replacement This item is not available
                                                                    Replacement Product This item may be available through a distributor
                                                                    Qty
                                                                    KM50TS™ Cutting Units

                                                                    M-Clamping
                                                                    (1 Products)
                                                                    View Products
                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                                    3738567 KM50TSMSDNN12 KM50TSMSDNN12 50.0000 1.968 0.0000 .0000 SN..120408/SN..432 0.51 1.13
                                                                      List price:
                                                                      Discount: %
                                                                      Your price::
                                                                      Replacement This item is not available
                                                                      Replacement Product This item may be available through a distributor
                                                                      Qty
                                                                      KM50TS™ Cutting Units

                                                                      M-Clamping
                                                                      (6 Products)
                                                                      View Products
                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                                      3738568 KM50TSMSKNL12 KM50TSMSKNL12 50.0000 1.969 35.0000 1.378 70.0000 2.756 SN..120408/SN..432 0.69 1.53
                                                                        3738569 KM50TSMSKNL15 KM50TSMSKNL15 50.0000 1.969 35.0000 1.378 70.0000 2.756 SN..150612/SN..543 0.71 1.57
                                                                          3738571 KM50TSMSKNL19 KM50TSMSKNL19 50.0000 1.969 35.0000 1.378 70.0000 2.756 SN..190612/SN..643 0.72 1.59
                                                                            3738572 KM50TSMSKNR12 KM50TSMSKNR12 50.0000 1.969 35.0000 1.378 70.0000 2.756 SN..120408/SN..432 0.69 1.52
                                                                              3738583 KM50TSMSKNR15 KM50TSMSKNR15 50.0000 1.969 35.0000 1.378 70.0000 2.756 SN..150612/SN..543 0.71 1.57
                                                                                3738585 KM50TSMSKNR19 KM50TSMSKNR19 50.0000 1.969 35.0000 1.378 70.0000 2.756 SN..190612/SN..643 0.72 1.59
                                                                                  List price:
                                                                                  Discount: %
                                                                                  Your price::
                                                                                  Replacement This item is not available
                                                                                  Replacement Product This item may be available through a distributor
                                                                                  Qty
                                                                                  KM50TS™ Cutting Units

                                                                                  M-Clamping
                                                                                  (6 Products)
                                                                                  View Products
                                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                                                  3738592 KM50TSMSRNL12 KM50TSMSRNL12 50.0000 1.968 30.0000 1.181 SN..120408/SN..432 0.58 1.28
                                                                                    3738613 KM50TSMSRNL15 KM50TSMSRNL15 50.0000 1.968 30.0000 1.181 SN..150612/SN..543 0.60 1.32
                                                                                      3738614 KM50TSMSRNL19 KM50TSMSRNL19 50.0000 1.968 30.0000 1.181 SN..190612/SN..643 0.60 1.31
                                                                                        3738615 KM50TSMSRNR12 KM50TSMSRNR12 50.0000 1.968 30.0000 1.181 SN..120408/SN..432 0.58 1.28
                                                                                          3738616 KM50TSMSRNR15 KM50TSMSRNR15 50.0000 1.968 30.0000 1.181 SN..150612/SN..543 0.60 1.32
                                                                                            3738617 KM50TSMSRNR19 KM50TSMSRNR19 50.0000 1.968 30.0000 1.181 SN..190612/SN..643 0.60 1.31
                                                                                              List price:
                                                                                              Discount: %
                                                                                              Your price::
                                                                                              Replacement This item is not available
                                                                                              Replacement Product This item may be available through a distributor
                                                                                              Qty
                                                                                              KM50TS™ Cutting Units

                                                                                              M-Clamping
                                                                                              (6 Products)
                                                                                              View Products
                                                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [L1S] Secondary Tool Length [L1S] Secondary Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                                                              3738618 KM50TSMSSNL12 KM50TSMSSNL12 50.0000 1.969 58.3300 2.296 35.0000 1.378 86.0000 3.386 SN..120408/SN..432 0.60 1.30
                                                                                                3738619 KM50TSMSSNL15 KM50TSMSSNL15 50.0000 1.969 60.2400 2.371 35.0000 1.378 100.0000 3.937 SN..150612/SN..543 0.63 1.38
                                                                                                  3738620 KM50TSMSSNL19 KM50TSMSSNL19 50.0000 1.969 62.4900 2.460 35.0000 1.378 100.0000 3.937 SN..190612/SN..643 0.67 1.47
                                                                                                    3738621 KM50TSMSSNR12 KM50TSMSSNR12 50.0000 1.969 58.3300 2.296 35.0000 1.378 86.0000 3.386 SN..120408/SN..432 0.60 1.30
                                                                                                      3738622 KM50TSMSSNR15 KM50TSMSSNR15 50.0000 1.969 60.2400 2.371 35.0000 1.378 100.0000 3.937 SN..150612/SN..543 0.63 1.38
                                                                                                        3738623 KM50TSMSSNR19 KM50TSMSSNR19 50.0000 1.969 62.4900 2.460 35.0000 1.378 100.0000 3.937 SN..190612/SN..643 0.67 1.47
                                                                                                          List price:
                                                                                                          Discount: %
                                                                                                          Your price::
                                                                                                          Replacement This item is not available
                                                                                                          Replacement Product This item may be available through a distributor
                                                                                                          Qty
                                                                                                          KM50TS™ Cutting Units

                                                                                                          M-Clamping
                                                                                                          (3 Products)
                                                                                                          View Products
                                                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                                                                          3838530 KM50TSMTFNL16 KM50TSMTFNL16 50.0000 1.969 35.0000 1.378 70.0000 2.756 TN..160408/TN..332 0.66 1.44
                                                                                                            3838532 KM50TSMTFNL22 KM50TSMTFNL22 50.0000 1.968 35.0000 1.378 70.0000 2.755 TN..220408/TN..432 0.68 1.50
                                                                                                              3738588 KM50TSMTFNR22 KM50TSMTFNR22 50.0000 1.969 35.0000 1.378 70.0000 2.756 TN..220408/TN..432 0.68 1.50
                                                                                                                List price:
                                                                                                                Discount: %
                                                                                                                Your price::
                                                                                                                Replacement This item is not available
                                                                                                                Replacement Product This item may be available through a distributor
                                                                                                                Qty
                                                                                                                KM50TS™ Cutting Units

                                                                                                                M-Clamping
                                                                                                                (2 Products)
                                                                                                                View Products
                                                                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                                                                                3738589 KM50TSMTJNL16 KM50TSMTJNL16 50.0000 1.968 35.0000 1.378 TN..160408/TN..332 0.64 1.41
                                                                                                                  3738590 KM50TSMTJNR16 KM50TSMTJNR16 50.0000 1.968 35.0000 1.378 TN..160408/TN..332 0.64 1.41
                                                                                                                    List price:
                                                                                                                    Discount: %
                                                                                                                    Your price::
                                                                                                                    Replacement This item is not available
                                                                                                                    Replacement Product This item may be available through a distributor
                                                                                                                    Qty
                                                                                                                    KM50TS™ Cutting Units

                                                                                                                    M-Clamping
                                                                                                                    (1 Products)
                                                                                                                    View Products
                                                                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                                                                                    3738591 KM50TSMTUNL16 KM50TSMTUNL16 50.0000 1.969 35.0000 1.378 70.0000 2.756 TN..160408/TN..332 0.63 1.39
                                                                                                                      List price:
                                                                                                                      Discount: %
                                                                                                                      Your price::
                                                                                                                      Replacement This item is not available
                                                                                                                      Replacement Product This item may be available through a distributor
                                                                                                                      Qty
                                                                                                                      KM50TS™ Cutting Units

                                                                                                                      M-Clamping
                                                                                                                      (2 Products)
                                                                                                                      View Products
                                                                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                                                                                      3738557 KM50TSMVHNL16 KM50TSMVHNL16 50.0000 1.968 35.0000 1.378 VN..160408/VN..332 0.55 1.22
                                                                                                                        3738558 KM50TSMVHNR16 KM50TSMVHNR16 50.0000 1.968 35.0000 1.378 VN..160408/VN..332 0.56 1.23
                                                                                                                          List price:
                                                                                                                          Discount: %
                                                                                                                          Your price::
                                                                                                                          Replacement This item is not available
                                                                                                                          Replacement Product This item may be available through a distributor
                                                                                                                          Qty