COVID-19: How WIDIA is responding

S-Clamping

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (29)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (29)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (29)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (29)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (29)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (29)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (29)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (29)
  • M Stainless Steel (29)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (29)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (29)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (29)
  • K Cast Iron (29)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (29)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (29)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (29)
  • N Non-Ferrous Materials (29)
    • N1
      Wrought Aluminum
      (29)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (29)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (18)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (29)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (29)
    • N6
      Carbon, Graphite Composites, CFRP
      (23)
    • N7
      MMC's
      (29)
  • S High-Temp Alloys (29)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (29)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (29)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (29)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (29)
  • H Hardened Materials (16)
    • H1
      Hardened Materials 44-48 HRC
      (16)
    • H2
      Hardened Materials 48-55 HRC
      (16)
    • H3
      Hardened Materials 56-60 HRC
      (16)
    • H4
      Hardened Materials >60 HRC
      (14)
Applications
  • Chamfer Turning Chamfer Turning (17)
  • Facing Facing (21)
  • Multiple Direction Cutting Multiple Direction Cutting (27)
  • Plunge Turning Plunge Turning (17)
  • Profiling Profiling (27)
  • TRN Boring TRN Boring (12)
  • Turning Turning (25)
Cutting Condition
  • Heavily Interrupted Cut (29)
  • Lightly Interrupted Cut (29)
  • Smooth Cut (29)
  • Varying Depth of Cut (29)
Tool Cutting Edge Angle
  • 45.0 (3)
  • 62.5 (1)
  • 90.0 (11)
  • 93.0 (8)
  • 95.0 (2)
  • 107.5 (4)
to
Connection Style
  • KM (17)
Cutting Edges Per Insert
  • 1.0 (19)
  • 2.0 (15)
  • 3.0 (4)
  • 4.0 (5)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.03 (6)
  • 0.038 (12)
  • 0.1 (14)
  • 0.2 (14)
  • 0.203 (6)
  • 0.394 (4)
  • 0.397 (12)
  • 0.4 (22)
  • 0.794 (14)
  • 0.8 (22)
  • 1.188 (2)
  • 1.191 (6)
  • 1.2 (22)
  • 1.6 (5)
  • 3.0 (1)
  • 4.0 (1)
  • 5.0 (3)
  • 6.0 (2)
to
Corner Radius
  • 0.001 (6)
  • 0.0015 (12)
  • 0.004 (14)
  • 0.0078 (6)
  • 0.0079 (6)
  • 0.008 (14)
  • 0.0155 (4)
  • 0.0156 (22)
  • 0.0158 (6)
  • 0.016 (7)
  • 0.031 (5)
  • 0.0312 (14)
  • 0.0313 (22)
  • 0.0315 (15)
  • 0.0468 (2)
  • 0.0469 (22)
  • 0.047 (2)
  • 0.0472 (6)
  • 0.063 (5)
  • 0.1181 (1)
  • 0.1575 (1)
  • 0.1969 (3)
  • 0.197 (3)
  • 0.2362 (2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (2)
  • AC5 (2)
  • CM3 (3)
  • CM5 (2)
  • CPX (2)
  • GH1 (6)
  • HCK10 (9)
  • HK1500 (8)
  • HK35 (16)
  • HT2 (14)
  • HTX (17)
  • HWK10 (1)
  • HWK15 (11)
  • K1010P (6)
  • K10M (17)
  • K10P (11)
  • K10U (17)
  • K15U (12)
  • K20K (12)
  • K25P (8)
  • K313 (29)
  • K420 (6)
  • K68 (26)
  • KB1345 (8)
  • KB1610 (8)
  • KB1625 (12)
  • KB1630 (2)
  • KB5610 (12)
  • KB5625 (12)
  • KB5630 (8)
  • KB9610 (12)
  • KBH10 (8)
  • KBH20 (10)
  • KC5010 (29)
  • KC5020P (8)
  • KC5025 (28)
  • KC5410 (20)
  • KC720 (22)
  • KC730 (29)
  • KC732 (20)
  • KC8050 (29)
  • KC810 (22)
  • KC850 (29)
  • KC9010 (9)
  • KC9025 (17)
  • KC910 (28)
  • KC9105 (17)
  • KC9110 (26)
  • KC9120 (13)
  • KC9125 (26)
  • KC9225 (22)
  • KC9240 (29)
  • KC9240NEW (29)
  • KC9315 (29)
  • KC9320 (27)
  • KC9325 (15)
  • KC935 (22)
  • KC950 (15)
  • KC990 (10)
  • KCD25 (18)
  • KCK05 (22)
  • KCK05B (17)
  • KCK15 (19)
  • KCK15B (22)
  • KCK20 (29)
  • KCK20B (29)
  • KCM15 (17)
  • KCM15B (10)
  • KCM25 (29)
  • KCM25B (19)
  • KCM35 (17)
  • KCM35B (10)
  • KCP05 (22)
  • KCP05B (2)
  • KCP10 (24)
  • KCP10B (24)
  • KCP15 (2)
  • KCP25 (29)
  • KCP25B (26)
  • KCP30 (24)
  • KCP30B (5)
  • KCP40B (2)
  • KCPK05 (2)
  • KCS10 (29)
  • KCS10B (23)
  • KCU10 (26)
  • KCU25 (23)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD1400 (12)
  • KD1405 (2)
  • KD1425 (12)
  • KT125 (6)
  • KT175 (11)
  • KT315 (22)
  • KT325 (17)
  • KTP10 (12)
  • KU10 (8)
  • KU10T (22)
  • KU30T (22)
  • KY1615 (2)
  • MC2 (2)
  • NL300 (2)
  • NL920 (7)
  • PB100 (10)
  • PB170 (6)
  • PB250 (12)
  • PD100 (8)
  • PD50 (8)
  • SP0G00 (3)
  • SP0PW3 (2)
  • SP4019 (7)
  • THM (29)
  • THM-X (9)
  • TN10P (22)
  • TN10U (22)
  • TN15M (17)
  • TN15U (12)
  • TN2000 (11)
  • TN20K (22)
  • TN20P (22)
  • TN30M (17)
  • TN4000 (5)
  • TN5015 (27)
  • TN5020 (26)
  • TN5105 (20)
  • TN5120 (29)
  • TN6010 (17)
  • TN6025 (15)
  • TN7005 (12)
  • TN7010 (29)
  • TN7015 (29)
  • TN7025 (29)
  • TN7035 (27)
  • TN7105 (23)
  • TN7110 (28)
  • TN7115 (29)
  • TN7125 (29)
  • TN7135 (27)
  • TN8025 (20)
  • TTI15 (14)
  • TTM09 (19)
  • TTR (24)
  • TTX (11)
  • W00342 (13)
  • WBH10C (8)
  • WBH10P (8)
  • WBH10U (8)
  • WBH20P (8)
  • WBH25P (8)
  • WBH25U (12)
  • WBH30P (8)
  • WBK45U (12)
  • WDN25U (12)
  • WK05CT (20)
  • WK15CT (17)
  • WK20CT (29)
  • WM15CT (17)
  • WM25CT (22)
  • WP15CT (29)
  • WP20TT (6)
  • WP25CT (29)
  • WP35CT (23)
  • WS10PT (17)
  • WS25PT (15)
  • WU10HT (16)
Hand Of Tool
  • L (6)
  • N (5)
  • R (6)
Wiper Insert
  • N (29)
  • Y (6)
Minimum Axial Groove Diameter
  • 1.969 (12)
to
Minimum Axial Groove Diameter
  • 50.0 (12)
to
Cutting Direction
  • S (17)
Rake Angle Style
  • NEUTRAL (ZERO) (17)
Maximum Bore Depth
  • 40.0 (12)
to
Maximum Bore Depth
  • 1.575 (12)
to
Front-End
Clamp Style
  • S (29)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • D-DIAMOND/RHOMBIC 55 (11)
  • R-ROUND (7)
  • S-SQUARE 90 (3)
  • T-TRIANGLE 60 (4)
  • V-DIAMOND/RHOMBIC 35 (2)
Maximum Cutting Depth
  • 12.0 (1)
  • 16.0 (1)
  • 20.0 (1)
to
Maximum Cutting Depth
  • 0.4724 (1)
  • 0.6299 (1)
  • 0.7874 (1)
to
Insert Geometry
Cutting Tool Material
  • B H (14)
  • B L (14)
  • C A (2)
  • D P (14)
  • H T (25)
  • H W (29)
Back-End
Connection Type
  • TAPER SHANK (17)
System Size
  • KM40TS (17)
Back-End Diameter
  • 1.5748 (28)
  • 1.575 (1)
to
Back-End Diameter
  • 40.0 (29)
to
other
Platform
  • KM40 (27)
Tool Unit
  • M (29)
Over All Length [L]
  • 40.0 (26)
  • 45.0 (1)
  • 47.0 (2)
to
Over All Length [L]
  • 1.5748 (14)
  • 1.575 (12)
  • 1.7717 (1)
  • 1.8504 (2)
to
Insert Hand
  • L (8)
  • N (29)
  • R (10)
obsoleteFacet
  • true (29)
  • false (27)
Cutting Condition Material
  • H-All (17)
  • K-All (29)
  • M-All (29)
  • N-All (24)
  • P-All (29)
  • S-All (29)
  • S4 (2)
No filters matching ""
View Products in
Metric
Inch
KM40TS™ Cutting Units

S-Clamping
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3959952 KM40TSSCLCL12 KM40TSSCLCL12 40.0000 1.575 27.0000 1.063 50.0000 1.969 CC..120408/CC..432 0.31 0.68
    3960003 KM40TSSCLCR12 KM40TSSCLCR12 40.0000 1.575 27.0000 1.063 50.0000 1.969 CC..120408/CC..432 0.31 0.68
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      KM40TS™ Cutting Units

      S-Clamping
      (4 Products)
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
      3960004 KM40TSSDJCL11 KM40TSSDJCL11 40.0000 1.574 27.0000 1.063 DC..11T308/DC..3252 0.24 0.54
        3960006 KM40TSSDJCL15 KM40TSSDJCL15 40.0000 1.574 27.0000 1.063 DC..150408/DC..432 0.24 0.52
          3960005 KM40TSSDJCR11 KM40TSSDJCR11 40.0000 1.574 27.0000 1.063 DC..11T308/DC..3252 0.24 0.54
            3960007 KM40TSSDJCR15 KM40TSSDJCR15 40.0000 1.574 27.0000 1.063 DC..150408/DC..432 0.24 0.53
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM40TS™ Cutting Units

              S-Clamping
              (1 Products)
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              3960008 KM40TSSDNCN15045M KM40TSSDNCN15045M 45.0000 1.771 0.0000 .0000 DC..150408/DC..432 0.23 0.50
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty
                KM40TS™ Cutting Units

                S-Clamping
                (4 Products)
                • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                3960009 KM40TSSDQCL11 KM40TSSDQCL11 40.0000 1.575 27.0000 1.063 50.0000 1.969 DC..11T308/DC..3252 0.27 0.61
                  3960011 KM40TSSDQCL15 KM40TSSDQCL15 40.0000 1.575 27.0000 1.063 50.0000 1.969 DC..150408/DC..432 0.27 0.60
                    3960010 KM40TSSDQCR11 KM40TSSDQCR11 40.0000 1.575 27.0000 1.063 50.0000 1.969 DC..11T308/DC..3252 0.27 0.61
                      3960012 KM40TSSDQCR15 KM40TSSDQCR15 40.0000 1.575 27.0000 1.063 50.0000 1.969 DC..150408/DC..432 0.27 0.60
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty
                        KM40TS™ Cutting Units

                        S-Clamping
                        (2 Products)
                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                        3960013 KM40TSSDUCL11 KM40TSSDUCL11 40.0000 1.575 27.0000 1.063 50.0000 1.969 DC..11T308/DC..3252 0.30 0.65
                          3960014 KM40TSSDUCR11 KM40TSSDUCR11 40.0000 1.575 27.0000 1.063 50.0000 1.969 DC..11T308/DC..3252 0.30 0.65
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            Qty
                            KM40TS™ Cutting Units

                            S-Clamping
                            (3 Products)
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CD] Cutting Depth [CD] Cutting Depth Gage Insert Weight Kilograms Weight Pounds
                            3960015 KM40TSSRDCN06 KM40TSSRDCN06 40.0000 1.574 3.0000 .1181 12.0000 .4724 RC..0602M0 0.22 0.48
                              3960016 KM40TSSRDCN08 KM40TSSRDCN08 40.0000 1.574 4.0000 .1575 16.0000 .6299 RC..0803M0 0.22 0.48
                                3960017 KM40TSSRDCN10 KM40TSSRDCN10 40.0000 1.574 5.0000 .1969 20.0000 .7874 RC..10T3M0 0.21 0.47
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  KM40TS™ Cutting Units

                                  S-Clamping
                                  (4 Products)
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                  3960018 KM40TSSRGCL10 KM40TSSRGCL10 40.0000 1.574 27.0000 1.063 RC..10T3M0 0.32 0.70
                                    3960020 KM40TSSRGCL12 KM40TSSRGCL12 40.0000 1.574 27.0000 1.063 RC..1204M0 0.31 0.69
                                      3960019 KM40TSSRGCR10 KM40TSSRGCR10 40.0000 1.574 27.0000 1.063 RC..10T3M0 0.31 0.69
                                        3960021 KM40TSSRGCR12 KM40TSSRGCR12 40.0000 1.574 27.0000 1.063 RC..1204M0 0.31 0.69
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor
                                          Qty
                                          KM40TS™ Cutting Units

                                          S-Clamping
                                          (1 Products)
                                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                          View Products
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                          3960022 KM40TSSSDCN12 KM40TSSSDCN12 40.0000 1.574 0.0000 .0000 SC..120408/SC..432 0.25 0.55
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty
                                            KM40TS™ Cutting Units

                                            S-Clamping
                                            (2 Products)
                                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                            3960033 KM40TSSSSCL12 KM40TSSSSCL12 40.0000 1.575 27.0000 1.063 50.0000 1.969 SC..120408/SC..432 0.29 0.64
                                              3960034 KM40TSSSSCR12 KM40TSSSSCR12 40.0000 1.575 27.0000 1.063 50.0000 1.969 SC..120408/SC..432 0.29 0.64
                                                List price:
                                                Discount: %
                                                Your price::
                                                Replacement This item is not available
                                                Replacement Product This item may be available through a distributor
                                                Qty
                                                KM40TS™ Cutting Units

                                                S-Clamping
                                                (2 Products)
                                                View Products
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                3960035 KM40TSSTFCL16 KM40TSSTFCL16 40.0000 1.575 27.0000 1.063 50.0000 1.969 TC..16T308/TC..3252 0.33 0.73
                                                  3960036 KM40TSSTFCR16 KM40TSSTFCR16 40.0000 1.575 27.0000 1.063 50.0000 1.969 TC..16T308/TC..3252 0.33 0.72
                                                    List price:
                                                    Discount: %
                                                    Your price::
                                                    Replacement This item is not available
                                                    Replacement Product This item may be available through a distributor
                                                    Qty
                                                    KM40TS™ Cutting Units

                                                    S-Clamping
                                                    (2 Products)
                                                    View Products
                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                    3960037 KM40TSSTGCL16 KM40TSSTGCL16 40.0000 1.574 27.0000 1.063 TC..16T308/TC..3252 0.33 0.73
                                                      3960038 KM40TSSTGCR16 KM40TSSTGCR16 40.0000 1.574 27.0000 1.063 TC..16T308/TC..3252 0.33 0.73
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        Qty
                                                        KM40TS™ Cutting Units

                                                        S-Clamping
                                                        (2 Products)
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                        3960039 KM40TSSVJBL16 KM40TSSVJBL16 47.0000 1.850 27.0000 1.063 VB..160408/VB..332 0.27 0.59
                                                          3960040 KM40TSSVJBR16 KM40TSSVJBR16 47.0000 1.850 27.0000 1.063 VB..160408/VB..332 0.27 0.59
                                                            List price:
                                                            Discount: %
                                                            Your price::
                                                            Replacement This item is not available
                                                            Replacement Product This item may be available through a distributor
                                                            Qty
                                                            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                            You are about to create a duplicate . Do you want to proceed?
                                                            You are about to delete Do you want to proceed?
                                                            What would you like to rename your to?
                                                            Please enter a valid name
                                                            Please enter a name for the duplicate
                                                            Please enter a valid name
                                                            You are about to add to your My Solutions page. Do you want to proceed?
                                                            Please enter a valid name
                                                            Send a copy of

                                                            Please enter a valid Email
                                                            Please enter a valid name

                                                            We have found the following CAD Drawings

                                                            Select the files you are looking for and download them all at once

                                                            You should be logged to see your dashboard information
                                                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                            item(s) successfully added to the cart
                                                            View Cart