COVID-19: How WIDIA is responding

KM40TS™ • HPC • High Pressure Coolant Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (6)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
    • N6
      Carbon, Graphite Composites, CFRP
      (8)
    • N7
      MMC's
      (8)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
  • Back Boring Back Boring (8)
  • Cut-Off Cut-Off (8)
  • Deep Grooving Deep Grooving (8)
  • Face Grooving Face Grooving (8)
  • Facing Facing (8)
  • Grooving Grooving (8)
  • ID Facing ID Facing (8)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (8)
  • OD Thread Turning OD Thread Turning (8)
  • TRN Boring TRN Boring (8)
  • Threading Threading (8)
  • Turning Turning (8)
Cutting Condition
  • Heavily Interrupted Cut (8)
  • Interrupted (6)
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Tool Cutting Edge Angle
  • 93.0 (4)
  • 95.0 (4)
to
Connection Style
  • KM (4)
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (6)
  • 3.0 (2)
  • 4.0 (4)
  • 6.0 (2)
  • 8.0 (2)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.038 (2)
  • 0.1 (6)
  • 0.102 (4)
  • 0.2 (6)
  • 0.203 (2)
  • 0.34 (2)
  • 0.397 (8)
  • 0.4 (8)
  • 0.406 (2)
  • 0.6 (2)
  • 0.792 (4)
  • 0.794 (8)
  • 0.8 (8)
  • 1.188 (2)
  • 1.19 (2)
  • 1.191 (6)
  • 1.2 (8)
  • 1.587 (2)
  • 1.588 (4)
  • 1.6 (6)
to
Corner Radius
  • 0.0015 (2)
  • 0.004 (8)
  • 0.008 (6)
  • 0.0083 (2)
  • 0.013 (2)
  • 0.0156 (8)
  • 0.016 (6)
  • 0.031 (6)
  • 0.0312 (8)
  • 0.0313 (8)
  • 0.0315 (4)
  • 0.0468 (2)
  • 0.0469 (8)
  • 0.047 (6)
  • 0.0472 (2)
  • 0.0625 (6)
  • 0.063 (6)
  • 0.1563 (2)
  • 0.312 (2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (4)
  • 241 (2)
  • CL4 (4)
  • CM2 (4)
  • CM3 (4)
  • CM4 (2)
  • CPX (4)
  • CW2 (4)
  • CW2015 (4)
  • CW5025 (6)
  • GX (2)
  • HK1500 (8)
  • HT2 (6)
  • HTX (4)
  • K060 (2)
  • K090 (4)
  • K1 (2)
  • K10M (8)
  • K10P (6)
  • K10U (6)
  • K15U (8)
  • K20K (6)
  • K21 (2)
  • K25M (6)
  • K25P (6)
  • K313 (8)
  • K35P (2)
  • K420 (2)
  • K45 (2)
  • K68 (6)
  • KB1340 (2)
  • KB1345 (2)
  • KB1610 (6)
  • KB1625 (4)
  • KB1630 (2)
  • KB5610 (6)
  • KB5625 (4)
  • KB5630 (4)
  • KB9610 (8)
  • KB9640 (4)
  • KBH10 (8)
  • KBH10B (4)
  • KBH20 (8)
  • KBH20B (4)
  • KBK35 (2)
  • KC210 (4)
  • KC250 (2)
  • KC5010 (8)
  • KC5020P (2)
  • KC5025 (8)
  • KC5410 (8)
  • KC5510 (6)
  • KC5525 (6)
  • KC710 (2)
  • KC720 (6)
  • KC722 (2)
  • KC730 (6)
  • KC7310 (6)
  • KC732 (6)
  • KC8050 (8)
  • KC810 (8)
  • KC850 (8)
  • KC9010 (6)
  • KC9025 (8)
  • KC910 (8)
  • KC9105 (8)
  • KC9110 (8)
  • KC9120 (6)
  • KC9125 (8)
  • KC9140 (6)
  • KC9145 (6)
  • KC9210 (2)
  • KC9215 (6)
  • KC9225 (8)
  • KC9240 (8)
  • KC9240NEW (8)
  • KC9245 (6)
  • KC9315 (8)
  • KC9320 (8)
  • KC9325 (6)
  • KC935 (8)
  • KC950 (8)
  • KC990 (6)
  • KCD25 (2)
  • KCK05 (8)
  • KCK05B (8)
  • KCK15 (8)
  • KCK15B (8)
  • KCK20 (8)
  • KCK20B (8)
  • KCM15 (8)
  • KCM15B (8)
  • KCM25 (8)
  • KCM25B (8)
  • KCM35 (8)
  • KCM35B (6)
  • KCP05 (8)
  • KCP05B (8)
  • KCP10 (8)
  • KCP10B (8)
  • KCP15 (2)
  • KCP25 (8)
  • KCP25B (8)
  • KCP30 (8)
  • KCP30B (6)
  • KCP40 (6)
  • KCP40B (8)
  • KCPK05 (6)
  • KCS10 (4)
  • KCS10B (8)
  • KCU10 (8)
  • KCU25 (8)
  • KD050 (4)
  • KD081 (4)
  • KD100 (4)
  • KD120 (2)
  • KD1400 (6)
  • KD1405 (4)
  • KD1425 (6)
  • KM1 (2)
  • KMF (2)
  • KT1120 (2)
  • KT125 (4)
  • KT150 (2)
  • KT175 (6)
  • KT315 (8)
  • KT325 (6)
  • KTP10 (2)
  • KU10 (2)
  • KU10T (8)
  • KU30T (8)
  • KY1310 (4)
  • KY1320 (6)
  • KY1540 (2)
  • KY1615 (4)
  • KY2000 (2)
  • KY2100 (2)
  • KY3000 (4)
  • KY3400 (4)
  • KY3500 (6)
  • KY4000 (2)
  • KY4300 (2)
  • KY4400 (6)
  • KYHK15B (6)
  • KYK10 (4)
  • KYK25 (4)
  • KYK35 (6)
  • KYS25 (2)
  • KYS30 (4)
  • NL200 (4)
  • NL250 (6)
  • NL300 (4)
  • NL400 (4)
  • NL920 (6)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (4)
  • SP0819 (6)
  • SP3019 (4)
  • SP4019 (2)
  • THM (4)
  • THM-X (4)
  • THMF-X (2)
  • TN10P (8)
  • TN10U (8)
  • TN15M (8)
  • TN15U (8)
  • TN2000 (8)
  • TN20K (8)
  • TN20P (8)
  • TN30M (8)
  • TN30P (6)
  • TN4000 (8)
  • TN5015 (6)
  • TN5020 (8)
  • TN5105 (6)
  • TN5120 (8)
  • TN6010 (4)
  • TN6025 (6)
  • TN7005 (8)
  • TN7010 (8)
  • TN7015 (8)
  • TN7025 (8)
  • TN7035 (8)
  • TN7105 (8)
  • TN7110 (8)
  • TN7115 (8)
  • TN7125 (8)
  • TN7135 (8)
  • TN8025 (6)
  • TTI15 (6)
  • TTR (2)
  • TTS (4)
  • TTX (6)
  • WBH10C (6)
  • WBH10P (4)
  • WBH10U (4)
  • WBH25P (4)
  • WBH25U (6)
  • WBH30P (4)
  • WBK40U (2)
  • WBK45U (4)
  • WDN00U (2)
  • WDN25U (6)
  • WK05CT (6)
  • WK15CT (8)
  • WK20CT (8)
  • WM15CT (8)
  • WM25CT (8)
  • WM35CT (6)
  • WP05CT (4)
  • WP15CT (8)
  • WP20TT (2)
  • WP25CT (8)
  • WP35CT (8)
  • WS10PT (6)
  • WS25PT (6)
  • WU10HT (8)
  • X00511 (2)
Hand Of Tool
  • L (2)
  • R (2)
Wiper Insert
  • N (8)
  • Y (6)
Minimum Axial Groove Diameter
  • 1.969 (4)
to
Minimum Axial Groove Diameter
  • 50.0 (4)
to
Cutting Direction
  • S (4)
Rake Angle Style
  • DOUBLE NEGATIVE (2)
  • NEUTRAL (ZERO) (2)
Maximum Bore Depth
  • 40.0 (4)
to
Maximum Bore Depth
  • 1.575 (4)
to
Front-End
Clamp Style
  • P (6)
  • S (2)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • D-DIAMOND/RHOMBIC 55 (2)
  • V-DIAMOND/RHOMBIC 35 (2)
  • W-TRIGON 80 (2)
Insert Geometry
Cutting Tool Material
  • B H (8)
  • B L (8)
  • C A (6)
  • C N (6)
  • D P (8)
  • H T (8)
  • H W (8)
Back-End
Connection Type
  • TAPER SHANK (4)
System Size
  • KM40TS (4)
Back-End Diameter
  • 1.575 (8)
to
Back-End Diameter
  • 40.0 (8)
to
other
Platform
  • KM40 (8)
Tool Unit
  • M (8)
Over All Length [L]
  • 40.0 (4)
  • 50.0 (4)
to
Over All Length [L]
  • 1.575 (4)
  • 1.969 (4)
to
Insert Hand
  • L (2)
  • N (8)
  • R (2)
obsoleteFacet
  • false (8)
  • true (8)
Cutting Condition Material
  • H-All (8)
  • K-All (8)
  • K1 (2)
  • M-All (8)
  • N-All (8)
  • P-All (8)
  • S-All (8)
  • S4 (4)
No filters matching ""
View Products in
Metric
Inch
KM40TS™ Cutting Units HPC

P-Clamping
(2 Products)
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Multi Coolant TurningMulti Coolant Turning
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
6250365 KM40TSPCLNL12HPC KM40TSPCLNL12HPC 40.0000 1.575 27.0000 1.063 50.0000 1.969 CN..120408/CN..432 0.36 0.80
    6250363 KM40TSPCLNR12HPC KM40TSPCLNR12HPC 40.0000 1.575 27.0000 1.063 50.0000 1.969 CN..120408/CN..432 0.36 0.80
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      KM40TS™ Cutting Units HPC

      P-Clamping
      (2 Products)
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Multi Coolant TurningMulti Coolant Turning
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
      6250367 KM40TSPDJNL15050MHPC KM40TSPDJNL15050MHPC 50.0000 1.969 27.0000 1.063 DN..150608/DN..442 0.42 0.93
        6250366 KM40TSPDJNR15050MHPC KM40TSPDJNR15050MHPC 50.0000 1.969 27.0000 1.063 DN..150608/DN..442 0.42 0.93
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          KM40TS™ Cutting Units HPC

          P-Clamping
          (2 Products)
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Multi Coolant TurningMulti Coolant Turning
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
          6250371 KM40TSPWLNL08HPC KM40TSPWLNL08HPC 40.0000 1.575 27.0000 1.063 50.0000 1.969 WN..080408/WN..432 0.35 0.78
            6250370 KM40TSPWLNR08HPC KM40TSPWLNR08HPC 40.0000 1.575 27.0000 1.063 50.0000 1.969 WN..080408/WN..432 0.35 0.78
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM40TS™ Cutting Units HPC

              S-Clamping
              (2 Products)
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Multi Coolant TurningMulti Coolant Turning
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              6250369 KM40TSSVJBL16050MHPC KM40TSSVJBL16050MHPC 50.0000 1.969 27.0000 1.063 VB..160408/VB..332 0.31 0.69
                6250368 KM40TSSVJBR16050MHPC KM40TSSVJBR16050MHPC 50.0000 1.969 27.0000 1.063 VB..160408/VB..332 0.31 0.69
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty
                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                  You are about to create a duplicate . Do you want to proceed?
                  You are about to delete Do you want to proceed?
                  What would you like to rename your to?
                  Please enter a valid name
                  Please enter a name for the duplicate
                  Please enter a valid name
                  You are about to add to your My Solutions page. Do you want to proceed?
                  Please enter a valid name
                  Send a copy of

                  Please enter a valid Email
                  Please enter a valid name

                  We have found the following CAD Drawings

                  Select the files you are looking for and download them all at once

                  You should be logged to see your dashboard information
                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                  item(s) successfully added to the cart
                  View Cart