COVID-19: How WIDIA is responding

KM32TS™ Internal Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (28)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (28)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (28)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (28)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (28)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (28)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (28)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (28)
  • M Stainless Steel (28)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (28)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (28)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (28)
  • K Cast Iron (28)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (28)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (28)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (28)
  • N Non-Ferrous Materials (28)
    • N1
      Wrought Aluminum
      (28)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (28)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (28)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (28)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (28)
    • N6
      Carbon, Graphite Composites, CFRP
      (28)
    • N7
      MMC's
      (28)
  • S High-Temp Alloys (28)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (28)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (28)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (28)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (28)
  • H Hardened Materials (28)
    • H1
      Hardened Materials 44-48 HRC
      (28)
    • H2
      Hardened Materials 48-55 HRC
      (24)
    • H3
      Hardened Materials 56-60 HRC
      (20)
    • H4
      Hardened Materials >60 HRC
      (20)
Applications
  • Back Boring Back Boring (24)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (8)
  • Blind Hole Finishing Blind Hole Finishing (8)
  • Chamfer Turning Chamfer Turning (8)
  • Cut-Off Cut-Off (8)
  • Deep Grooving Deep Grooving (8)
  • Face Grooving Face Grooving (8)
  • Facing Facing (26)
  • Grooving Grooving (2)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (27)
  • OD Thread Turning OD Thread Turning (8)
  • Plunge Turning Plunge Turning (8)
  • Profiling Profiling (25)
  • TRN Boring TRN Boring (25)
  • Threading Threading (8)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (8)
  • Through Hole Finishing Through Hole Finishing (8)
  • Turning Turning (26)
Type of Thread
  • 55 (4)
  • 60 (8)
  • ACME (2)
  • API RD (2)
  • BSPT (4)
  • BSW (4)
  • BUTTRESS (4)
  • M (6)
  • NPT (4)
  • NPTF (4)
  • RD DIN 405 (2)
  • STUB ACME (2)
  • TR DIN 103 (2)
  • UN (8)
  • UNJ (4)
Cutting Condition
  • Heavily Interrupted Cut (24)
  • Interrupted (5)
  • Lightly Interrupted Cut (24)
  • Smooth Cut (24)
  • Varying Depth of Cut (24)
Tool Cutting Edge Angle
  • 90.0 (8)
  • 93.0 (7)
  • 95.0 (13)
to
Connection Style
  • KM (28)
Cutting Edges Per Insert
  • 1.0 (24)
  • 2.0 (24)
  • 3.0 (4)
  • 4.0 (14)
  • 8.0 (4)
to
Corner configuration
Corner Radius
  • 0.03 (1)
  • 0.033 (2)
  • 0.038 (1)
  • 0.051 (4)
  • 0.056 (1)
  • 0.07 (2)
  • 0.076 (5)
  • 0.08 (4)
  • 0.081 (1)
  • 0.089 (4)
  • 0.09 (4)
  • 0.097 (1)
  • 0.1 (19)
  • 0.102 (10)
  • 0.108 (1)
  • 0.152 (2)
  • 0.16 (1)
  • 0.18 (2)
  • 0.185 (2)
  • 0.19 (4)
  • 0.191 (4)
  • 0.2 (21)
  • 0.202 (2)
  • 0.203 (13)
  • 0.21 (2)
  • 0.225 (2)
  • 0.343 (2)
  • 0.397 (14)
  • 0.4 (20)
  • 0.406 (1)
  • 0.5 (4)
  • 0.7 (1)
  • 0.75 (4)
  • 0.787 (4)
  • 0.792 (4)
  • 0.794 (12)
  • 0.8 (20)
  • 0.936 (1)
  • 1.0 (4)
  • 1.19 (6)
  • 1.191 (5)
  • 1.194 (4)
  • 1.2 (10)
  • 1.25 (4)
  • 1.5 (4)
  • 1.587 (4)
  • 1.588 (9)
  • 1.6 (5)
  • 1.75 (4)
  • 2.381 (1)
to
Corner Radius
  • 0.0012 (1)
  • 0.0013 (2)
  • 0.0015 (1)
  • 0.002 (4)
  • 0.0028 (2)
  • 0.003 (5)
  • 0.0031 (4)
  • 0.0032 (1)
  • 0.0035 (4)
  • 0.0038 (1)
  • 0.004 (20)
  • 0.0043 (1)
  • 0.006 (2)
  • 0.0063 (1)
  • 0.0075 (4)
  • 0.008 (23)
  • 0.0083 (6)
  • 0.0089 (2)
  • 0.0135 (2)
  • 0.0156 (20)
  • 0.016 (5)
  • 0.0197 (4)
  • 0.022 (1)
  • 0.0276 (1)
  • 0.0295 (4)
  • 0.031 (9)
  • 0.0312 (12)
  • 0.0313 (20)
  • 0.0315 (4)
  • 0.0369 (1)
  • 0.0394 (4)
  • 0.0469 (10)
  • 0.047 (11)
  • 0.0472 (4)
  • 0.0492 (4)
  • 0.0591 (4)
  • 0.0625 (9)
  • 0.063 (4)
  • 0.0689 (4)
  • 0.0938 (1)
  • 0.1563 (4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (5)
  • 241 (4)
  • CG5 (5)
  • CL4 (4)
  • CM1 (5)
  • CM2 (5)
  • CM3 (4)
  • CM4 (4)
  • CPX (5)
  • CW2 (4)
  • CW2015 (5)
  • CW5025 (5)
  • GX (4)
  • HCK20 (1)
  • HCM15 (2)
  • HK1500 (4)
  • HT2 (4)
  • HTX (4)
  • K060 (5)
  • K090 (5)
  • K1 (4)
  • K10M (5)
  • K10P (5)
  • K10U (5)
  • K15 (4)
  • K15U (5)
  • K20K (5)
  • K21 (4)
  • K25M (5)
  • K25P (5)
  • K2885 (4)
  • K313 (24)
  • K35P (1)
  • K420 (9)
  • K45 (5)
  • K4H (2)
  • K68 (27)
  • KB1340 (4)
  • KB1345 (7)
  • KB1610 (16)
  • KB1625 (7)
  • KB1630 (12)
  • KB5610 (14)
  • KB5625 (11)
  • KB5630 (10)
  • KB9610 (16)
  • KB9640 (4)
  • KBH10 (5)
  • KBH10B (5)
  • KBH20 (5)
  • KBH20B (5)
  • KBK35 (4)
  • KC210 (5)
  • KC250 (13)
  • KC5010 (27)
  • KC5025 (28)
  • KC5410 (24)
  • KC5510 (5)
  • KC5525 (5)
  • KC710 (13)
  • KC720 (28)
  • KC722 (11)
  • KC730 (28)
  • KC7310 (9)
  • KC732 (20)
  • KC8050 (20)
  • KC810 (24)
  • KC850 (24)
  • KC9010 (16)
  • KC9025 (20)
  • KC910 (22)
  • KC9105 (16)
  • KC9110 (24)
  • KC9120 (16)
  • KC9125 (20)
  • KC9140 (5)
  • KC9145 (5)
  • KC9215 (5)
  • KC9225 (20)
  • KC9240 (20)
  • KC9240NEW (20)
  • KC9245 (5)
  • KC9315 (20)
  • KC9320 (20)
  • KC9325 (16)
  • KC935 (24)
  • KC950 (20)
  • KC990 (20)
  • KCD25 (16)
  • KCK05 (20)
  • KCK05B (7)
  • KCK15 (16)
  • KCK15B (16)
  • KCK20 (22)
  • KCK20B (24)
  • KCM15 (20)
  • KCM15B (14)
  • KCM25 (20)
  • KCM25B (16)
  • KCM35 (12)
  • KCM35B (4)
  • KCP05 (20)
  • KCP05B (5)
  • KCP10 (20)
  • KCP10B (24)
  • KCP25 (20)
  • KCP25B (24)
  • KCP30 (20)
  • KCP30B (5)
  • KCP40 (5)
  • KCP40B (5)
  • KCPK05 (9)
  • KCS10 (19)
  • KCS10B (20)
  • KCU10 (24)
  • KCU25 (24)
  • KD050 (16)
  • KD081 (5)
  • KD100 (20)
  • KD105 (9)
  • KD120 (16)
  • KD1400 (20)
  • KD1405 (20)
  • KD1425 (20)
  • KM1 (4)
  • KMF (4)
  • KT1120 (4)
  • KT125 (9)
  • KT150 (9)
  • KT175 (24)
  • KT315 (24)
  • KT325 (4)
  • KTP10 (16)
  • KU10 (9)
  • KU10T (24)
  • KU25T (7)
  • KU30T (20)
  • KY1310 (5)
  • KY1320 (5)
  • KY1540 (5)
  • KY1615 (5)
  • KY2000 (5)
  • KY2100 (5)
  • KY3000 (5)
  • KY3400 (5)
  • KY3500 (5)
  • KY4000 (4)
  • KY4300 (5)
  • KY4400 (5)
  • KYHK15B (5)
  • KYK10 (5)
  • KYK25 (5)
  • KYK35 (5)
  • KYS25 (5)
  • KYS30 (5)
  • NL200 (4)
  • NL250 (5)
  • NL300 (4)
  • NL400 (4)
  • NL920 (5)
  • P25 (6)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (4)
  • SP0819 (4)
  • SP3019 (4)
  • SP4019 (4)
  • SP4066 (1)
  • THM (8)
  • THM-X (4)
  • THMF-X (4)
  • TN10P (7)
  • TN10U (5)
  • TN15M (5)
  • TN15U (5)
  • TN2000 (4)
  • TN20K (5)
  • TN20P (5)
  • TN30M (5)
  • TN30P (5)
  • TN4000 (4)
  • TN5015 (4)
  • TN5020 (4)
  • TN5105 (5)
  • TN5120 (5)
  • TN6010 (9)
  • TN6025 (12)
  • TN7005 (5)
  • TN7010 (5)
  • TN7015 (5)
  • TN7025 (5)
  • TN7035 (4)
  • TN7105 (4)
  • TN7110 (8)
  • TN7115 (5)
  • TN7125 (4)
  • TN7135 (4)
  • TN8025 (5)
  • TTI15 (4)
  • TTR (4)
  • TTS (4)
  • TTX (4)
  • W00162 (4)
  • WBH10C (10)
  • WBH10P (14)
  • WBH10U (14)
  • WBH25P (18)
  • WBH25U (5)
  • WBH30P (14)
  • WBK40U (4)
  • WBK45U (5)
  • WDN00U (20)
  • WDN25U (20)
  • WK05CT (5)
  • WK15CT (4)
  • WK20CT (16)
  • WM15CT (18)
  • WM25CT (14)
  • WM35CT (5)
  • WP05CT (4)
  • WP15CT (14)
  • WP25CT (20)
  • WP35CT (5)
  • WS10PT (5)
  • WS25PT (5)
  • WU10HT (5)
  • WU10PT (2)
  • X00511 (4)
Hand Of Tool
  • L (14)
  • R (14)
Wiper Insert
  • N (28)
  • Y (20)
Minimum Axial Groove Diameter
  • 0.5118 (3)
  • 0.6299 (2)
  • 0.63 (2)
  • 0.7283 (1)
  • 0.787 (2)
  • 0.7874 (3)
  • 0.9843 (6)
  • 1.2598 (8)
  • 1.26 (1)
to
Minimum Axial Groove Diameter
  • 13.0 (3)
  • 16.0 (4)
  • 18.5 (1)
  • 20.0 (5)
  • 25.0 (6)
  • 32.0 (9)
to
Maximum Axial Groove Diameter
  • 9999.0 (4)
to
Maximum Axial Groove Diameter
  • 393.661 (4)
to
Cutting Direction
  • B (15)
  • E (5)
  • S (8)
Rake Angle Style
  • DOUBLE NEGATIVE (5)
  • DOUBLE POSITIVE (4)
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (11)
  • POSITIVE-ZERO (6)
Maximum Bore Depth
  • 35.0 (3)
  • 42.0 (3)
  • 43.21 (2)
  • 56.0 (3)
  • 57.25 (2)
  • 58.0 (4)
  • 60.0 (7)
  • 75.0 (4)
to
Maximum Bore Depth
  • 1.378 (3)
  • 1.6535 (1)
  • 1.654 (2)
  • 1.701 (2)
  • 2.2047 (3)
  • 2.254 (2)
  • 2.2835 (4)
  • 2.362 (3)
  • 2.3622 (4)
  • 2.9528 (3)
  • 2.953 (1)
to
Boring Bar Material
  • S (28)
Front-End
Clamp Style
  • M (7)
  • N (4)
  • S (17)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (13)
  • D-DIAMOND/RHOMBIC 55 (7)
  • LT-TRIANGLE LAY DOWN THREAD 60 (4)
  • TN-TOP NOTCH (4)
Cutting Width
  • 0.5 (4)
  • 0.787 (4)
  • 0.8 (4)
  • 0.889 (4)
  • 0.991 (4)
  • 1.0 (4)
  • 1.041 (4)
  • 1.19 (4)
  • 1.194 (4)
  • 1.199 (2)
  • 1.2 (4)
  • 1.39 (4)
  • 1.397 (4)
  • 1.4 (4)
  • 1.473 (4)
  • 1.5 (4)
  • 1.56 (2)
  • 1.57 (2)
  • 1.575 (4)
  • 1.69 (4)
  • 1.7 (4)
  • 1.702 (4)
  • 1.75 (4)
  • 1.94 (4)
  • 1.95 (4)
  • 1.956 (4)
  • 2.0 (4)
  • 2.007 (4)
  • 2.2 (4)
  • 2.235 (4)
  • 2.24 (4)
  • 2.25 (4)
  • 2.388 (4)
  • 2.5 (4)
  • 2.74 (4)
  • 2.743 (4)
  • 2.75 (4)
  • 2.997 (4)
  • 3.0 (4)
  • 3.175 (4)
  • 3.18 (2)
  • 3.2 (4)
  • 3.245 (4)
  • 3.251 (4)
  • 3.27 (4)
  • 3.5 (4)
  • 3.73 (2)
  • 3.81 (4)
  • 3.84 (4)
to
Cutting Width
  • 0.0197 (4)
  • 0.031 (4)
  • 0.0315 (4)
  • 0.035 (4)
  • 0.039 (4)
  • 0.0394 (4)
  • 0.041 (4)
  • 0.047 (4)
  • 0.0472 (4)
  • 0.055 (4)
  • 0.0551 (4)
  • 0.058 (4)
  • 0.0591 (4)
  • 0.062 (4)
  • 0.0669 (4)
  • 0.067 (4)
  • 0.0689 (4)
  • 0.076 (4)
  • 0.0768 (4)
  • 0.077 (4)
  • 0.0787 (4)
  • 0.079 (4)
  • 0.0866 (4)
  • 0.088 (4)
  • 0.0886 (4)
  • 0.094 (4)
  • 0.0984 (4)
  • 0.108 (4)
  • 0.1083 (4)
  • 0.118 (4)
  • 0.1181 (4)
  • 0.125 (4)
  • 0.126 (4)
  • 0.1278 (4)
  • 0.128 (4)
  • 0.129 (4)
  • 0.1378 (4)
  • 0.147 (2)
  • 0.15 (4)
  • 0.151 (4)
to
Maximum Cutting Depth
  • 3.0 (4)
  • 3.18 (2)
  • 3.505 (1)
  • 3.51 (1)
  • 4.5 (3)
to
Maximum Cutting Depth
  • 0.1181 (4)
  • 0.1252 (2)
  • 0.138 (2)
  • 0.1772 (3)
to
Insert Size
  • 2 (4)
Insert Geometry
Cutting Tool Material
  • B H (16)
  • B L (20)
  • C A (5)
  • C N (5)
  • D P (20)
  • H T (24)
  • H W (28)
Back-End
Connection Type
  • TAPER SHANK (28)
System Size
  • KM32 (23)
  • KM32TS (5)
Back-End Diameter
  • 1.258 (1)
  • 1.2598 (27)
to
Back-End Diameter
  • 32.0 (28)
to
other
Platform
  • KM32 (22)
Tool Unit
  • I (4)
  • M (28)
Over All Length [L]
  • 50.0 (3)
  • 60.0 (5)
  • 70.0 (10)
  • 80.0 (6)
  • 90.0 (4)
to
Over All Length [L]
  • 1.9685 (3)
  • 2.362 (2)
  • 2.3622 (3)
  • 2.7559 (7)
  • 2.756 (3)
  • 3.1496 (6)
  • 3.5433 (4)
to
Insert Hand
  • L (3)
  • N (20)
  • R (5)
obsoleteFacet
  • true (28)
  • false (22)
Cutting Condition Material
  • H-All (16)
  • K-All (24)
  • K1 (4)
  • M-All (24)
  • N-All (24)
  • P-All (24)
  • S-All (24)
  • S4 (20)
No filters matching ""
View Products in
Metric
Inch
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1020454 KM32TSS10CLSER11 KM32TSS10CLSER11 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 LT11NR 0.11 0.24
    1020456 KM32TSS12DLSER11 KM32TSS12DLSER11 16.0000 .6299 9.0000 .3543 42.0000 1.654 60.0000 2.362 LT11NR 0.14 0.31
      1020458 KM32TSS20FLSER16 KM32TSS20FLSER16 25.0000 .9843 13.0000 .5118 60.0000 2.362 80.0000 3.149 LT16NR    
        1020461 KM32TSS25GLSEL16 KM32TSS25GLSEL16 32.0000 1.259 17.0000 .6693 75.0000 2.953 90.0000 3.543 LT16NL    
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
          1144615 KM32TSS10CSCLPL06 KM32TSS10CSCLPL06 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 CP..060204/CP..2151    
            1144614 KM32TSS10CSCLPR06 KM32TSS10CSCLPR06 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 CP..060204/CP..2151    
              1144617 KM32TSS12DSCLPL06 KM32TSS12DSCLPL06 16.0000 .6300 9.0000 .3540 43.2100 1.701 60.0000 2.362 CP..060204/CP..2151 0.13 0.29
                1144616 KM32TSS12DSCLPR06 KM32TSS12DSCLPR06 16.0000 .6300 9.0000 .3540 43.2100 1.701 60.0000 2.362 CP..060204/CP..2151 0.13 0.29
                  1144619 KM32TSS16ESCLPL09 KM32TSS16ESCLPL09 20.0000 .7874 11.0000 .4331 56.0000 2.204 70.0000 2.755 CP..09T308/CP..3252    
                    1144618 KM32TSS16ESCLPR09 KM32TSS16ESCLPR09 20.0000 .7874 11.0000 .4331 56.0000 2.204 70.0000 2.755 CP..09T308/CP..3252    
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                      1020727 KM32TSS12DNER2 KM32TSS12DNER2 18.5000 .7283 11.0000 .4331 42.0000 1.654 60.0000 2.362 NG2L    
                        1020730 KM32TSS16ENEL2 KM32TSS16ENEL2 20.0000 .7870 11.0000 .4330 57.2500 2.254 70.0000 2.756 NG2R 0.16 0.35
                          1020729 KM32TSS16ENER2 KM32TSS16ENER2 20.0000 .7870 11.0000 .4330 57.2500 2.254 70.0000 2.756 NG2L 0.16 0.35
                            1144713 KM32TSS20FNEL2 KM32TSS20FNEL2 25.0000 .9843 13.0000 .5118 60.0000 2.362 80.0000 3.149 NG2R    
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              Qty
                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert
                              1020683 KM32TSS12DSDUPL07 KM32TSS12DSDUPL07 16.0000 .6299 9.0000 .3543 42.0000 1.653 60.0000 2.362 DP..070204/DP..2151
                                1020725 KM32TSS16ESDUPL07 KM32TSS16ESDUPL07 20.0000 .7874 11.0000 .4331 56.0000 2.204