COVID-19: How WIDIA is responding
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (13)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (13)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (13)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (13)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (13)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (13)
  • M Stainless Steel (13)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (13)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (13)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (13)
  • K Cast Iron (13)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (13)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (13)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (13)
  • N Non-Ferrous Materials (11)
    • N1
      Wrought Aluminum
      (11)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (11)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (11)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (11)
    • N6
      Carbon, Graphite Composites, CFRP
      (2)
    • N7
      MMC's
      (11)
  • S High-Temp Alloys (13)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (13)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (13)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (13)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (13)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
    • H2
      Hardened Materials 48-55 HRC
      (2)
    • H3
      Hardened Materials 56-60 HRC
      (2)
    • H4
      Hardened Materials >60 HRC
      (2)
Applications
  • Back Boring Back Boring (2)
  • Facing Facing (13)
  • Multiple Direction Cutting Multiple Direction Cutting (13)
  • Profiling Profiling (2)
  • TRN Boring TRN Boring (11)
  • Turning Turning (13)
Cutting Condition
  • Heavily Interrupted Cut (13)
  • Interrupted (8)
  • Lightly Interrupted Cut (13)
  • Smooth Cut (13)
  • Varying Depth of Cut (13)
Tool Cutting Edge Angle
  • 93.0 (4)
  • 95.0 (8)
  • 107.5 (1)
to
Connection Style
  • KM (2)
Cutting Edges Per Insert
  • 1.0 (2)
  • 2.0 (7)
  • 4.0 (9)
  • 6.0 (4)
  • 8.0 (4)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.1 (11)
  • 0.102 (2)
  • 0.2 (11)
  • 0.203 (2)
  • 0.397 (7)
  • 0.4 (13)
  • 0.792 (2)
  • 0.794 (11)
  • 0.8 (13)
  • 1.19 (2)
  • 1.191 (7)
  • 1.2 (13)
  • 1.587 (2)
  • 1.588 (2)
  • 1.6 (2)
to
Corner Radius
  • 0.004 (11)
  • 0.008 (11)
  • 0.0083 (2)
  • 0.0156 (13)
  • 0.016 (6)
  • 0.031 (7)
  • 0.0312 (11)
  • 0.0313 (13)
  • 0.0315 (2)
  • 0.0469 (13)
  • 0.047 (2)
  • 0.0472 (2)
  • 0.0625 (2)
  • 0.063 (2)
  • 0.1563 (2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (2)
  • 241 (2)
  • CL4 (2)
  • CM2 (2)
  • CM3 (2)
  • CM4 (2)
  • CPX (2)
  • CW2 (2)
  • CW2015 (2)
  • CW5025 (2)
  • GX (2)
  • HK1500 (6)
  • HT2 (7)
  • HTX (2)
  • K060 (2)
  • K090 (2)
  • K1 (2)
  • K10M (6)
  • K10P (8)
  • K10U (2)
  • K15U (2)
  • K20K (6)
  • K21 (2)
  • K25M (13)
  • K25P (4)
  • K313 (11)
  • K420 (2)
  • K45 (2)
  • K68 (2)
  • KB1340 (7)
  • KB1345 (2)
  • KB1610 (2)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (2)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (2)
  • KB9640 (7)
  • KBH10 (2)
  • KBH10B (2)
  • KBH20 (2)
  • KBH20B (2)
  • KBK35 (2)
  • KC210 (2)
  • KC250 (2)
  • KC5010 (13)
  • KC5025 (11)
  • KC5410 (2)
  • KC5510 (11)
  • KC5525 (11)
  • KC710 (2)
  • KC720 (2)
  • KC722 (2)
  • KC730 (13)
  • KC7310 (13)
  • KC732 (2)
  • KC8050 (13)
  • KC810 (7)
  • KC850 (9)
  • KC9010 (13)
  • KC9025 (13)
  • KC910 (2)
  • KC9105 (11)
  • KC9110 (13)
  • KC9120 (9)
  • KC9125 (13)
  • KC9140 (13)
  • KC9145 (2)
  • KC9215 (13)
  • KC9225 (13)
  • KC9240 (13)
  • KC9240NEW (13)
  • KC9245 (13)
  • KC9315 (13)
  • KC9320 (11)
  • KC9325 (11)
  • KC935 (13)
  • KC950 (2)
  • KC990 (13)
  • KCK05 (13)
  • KCK05B (7)
  • KCK15 (11)
  • KCK15B (13)
  • KCK20 (11)
  • KCK20B (11)
  • KCM15 (13)
  • KCM15B (13)
  • KCM25 (13)
  • KCM25B (11)
  • KCM35 (6)
  • KCM35B (6)
  • KCP05 (11)
  • KCP05B (11)
  • KCP10 (13)
  • KCP10B (13)
  • KCP25 (13)
  • KCP25B (13)
  • KCP30 (13)
  • KCP30B (6)
  • KCP40 (2)
  • KCP40B (8)
  • KCPK05 (7)
  • KCS10 (2)
  • KCS10B (7)
  • KCU10 (13)
  • KCU25 (11)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (2)
  • KD1405 (2)
  • KD1425 (2)
  • KM1 (2)
  • KMF (2)
  • KT1120 (2)
  • KT125 (2)
  • KT150 (2)
  • KT175 (2)
  • KT315 (13)
  • KT325 (7)
  • KU10T (11)
  • KU30T (11)
  • KY1310 (2)
  • KY1320 (2)
  • KY1540 (2)
  • KY1615 (2)
  • KY2000 (2)
  • KY2100 (2)
  • KY3000 (2)
  • KY3400 (2)
  • KY3500 (2)
  • KY4000 (2)
  • KY4300 (2)
  • KY4400 (2)
  • KYHK15B (2)
  • KYK10 (2)
  • KYK25 (2)
  • KYK35 (2)
  • KYS25 (2)
  • KYS30 (2)
  • NL200 (2)
  • NL250 (7)
  • NL300 (2)
  • NL400 (2)
  • NL920 (2)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (7)
  • SP0819 (2)
  • SP3019 (2)
  • SP4019 (6)
  • THM (2)
  • THM-X (2)
  • THMF-X (2)
  • TN10P (13)
  • TN10U (2)
  • TN15M (8)
  • TN15U (2)
  • TN2000 (6)
  • TN20K (6)
  • TN20P (13)
  • TN30M (13)
  • TN30P (2)
  • TN4000 (6)
  • TN5015 (7)
  • TN5020 (7)
  • TN5105 (7)
  • TN5120 (7)
  • TN6010 (2)
  • TN6025 (2)
  • TN7005 (9)
  • TN7010 (9)
  • TN7015 (9)
  • TN7025 (9)
  • TN7035 (2)
  • TN7105 (11)
  • TN7110 (7)
  • TN7115 (7)
  • TN7125 (7)
  • TN7135 (2)
  • TN8025 (11)
  • TTI15 (7)
  • TTR (2)
  • TTS (2)
  • TTX (2)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH25P (2)
  • WBH25U (2)
  • WBH30P (2)
  • WBK40U (7)
  • WBK45U (2)
  • WDN00U (2)
  • WDN25U (2)
  • WK05CT (11)
  • WK15CT (6)
  • WK20CT (11)
  • WM15CT (11)
  • WM25CT (11)
  • WM35CT (11)
  • WP05CT (2)
  • WP15CT (11)
  • WP20TT (5)
  • WP25CT (11)
  • WP35CT (11)
  • WS10PT (11)
  • WS25PT (11)
  • WU10HT (11)
  • X00511 (2)
Hand Of Tool
  • L (1)
  • R (1)
Wiper Insert
  • N (13)
  • Y (10)
Minimum Axial Groove Diameter
  • 1.2598 (4)
  • 1.575 (4)
  • 1.732 (3)
  • 2.913 (2)
to
Minimum Axial Groove Diameter
  • 32.0 (4)
  • 40.0 (4)
  • 44.0 (3)
  • 74.0 (2)
to
Cutting Direction
  • B (2)
Rake Angle Style
  • DOUBLE NEGATIVE (2)
Maximum Bore Depth
  • 35.0 (9)
  • 79.55 (1)
  • 80.0 (3)
to
Maximum Bore Depth
  • 1.378 (9)
  • 3.132 (1)
  • 3.1496 (3)
to
Boring Bar Material
  • S (2)
Front-End
Clamp Style
  • P (13)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (5)
  • W-TRIGON 80 (4)
Insert Geometry
Cutting Tool Material
  • B H (7)
  • B L (2)
  • C A (2)
  • C N (6)
  • D P (2)
  • H T (13)
  • H W (13)
Back-End
Connection Type
  • TAPER SHANK (2)
System Size
  • KM32 (2)
Back-End Diameter
  • 1.2598 (13)
to
Back-End Diameter
  • 32.0 (13)
to
other
Platform
  • KM32 (12)
Tool Unit
  • M (13)
Over All Length [L]
  • 35.0 (9)
  • 90.0 (4)
to
Over All Length [L]
  • 1.378 (9)
  • 3.5433 (4)
to
Insert Hand
  • N (13)
obsoleteFacet
  • true (13)
  • false (12)
Cutting Condition Material
  • H-All (2)
  • K-All (13)
  • K1 (7)
  • M-All (13)
  • N-All (7)
  • P-All (13)
  • S-All (11)
  • S4 (2)
No filters matching ""
View Products in
Metric
Inch
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
1135468 KM32TSPCLNL12 KM32TSPCLNL12 35.0000 1.378 22.0000 .8660 40.0000 1.575 CN..120408/CN..432 0.18 0.40
    1624632 KM32TSPCLNR12 KM32TSPCLNR12 35.0000 1.378 22.0000 .8661 40.0000 1.575 CN..120408/CN..432 0.18 0.40
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
      1232378 KM32TSPDJNL11 KM32TSPDJNL11 35.0000 1.378 22.0000 .8661 74.0000 2.913 DN..110408/DN..332 0.14 0.31
        1232377 KM32TSPDJNR11 KM32TSPDJNR11 35.0000 1.378 22.0000 .8661 74.0000 2.913 DN..110408/DN..332 0.14 0.31
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert
          1671515 KM32TSPDQNR11 KM32TSPDQNR11 35.0000 1.378 22.0000 .8661 44.0000 1.732 DN..110408/DN..332
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty
            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
            1232376 KM32TSPDUNL11 KM32TSPDUNL11 35.0000 1.378 22.0000 .8661 40.0000 1.575 DN..110408/DN..332 0.18 0.40
              1232375 KM32TSPDUNR11 KM32TSPDUNR11 35.0000 1.378 22.0000 .8661 40.0000 1.575 DN..110408/DN..332 0.18 0.40
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty
                • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                1232374 KM32TSPWLNL06 KM32TSPWLNL06 35.0000 1.378 22.0000 .8661 44.0000 1.732 WN..060408/WN..332 0.19 0.42
                  1232372 KM32TSPWLNR06 KM32TSPWLNR06 35.0000 1.378 22.0000 .8661 44.0000 1.732 WN..060408/WN..332 0.19 0.42
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty
                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                    1671736 KM32TSS25GPCLNL09 KM32TSS25GPCLNL09 32.0000 1.259 17.0000 .6693 79.5500 3.132 90.0000 3.543 CN..090308/CN..322 0.35 0.77
                      1671735 KM32TSS25GPCLNR09 KM32TSS25GPCLNR09 32.0000 1.259 17.0000 .6693 80.0000 3.149 90.0000 3.543 CN..090308/CN..322 0.35 0.77
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty
                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                        1695784 KM32TSS25GPWLNL06 KM32TSS25GPWLNL06 32.0000 1.259 17.0000 .6693 80.0000 3.149 90.0000 3.543 WN..060408/WN..332 0.35 0.77
                          1695783 KM32TSS25GPWLNR06 KM32TSS25GPWLNR06 32.0000 1.259 17.0000 .6693 80.0000 3.149 90.0000 3.543 WN..060408/WN..332    
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            Qty
                            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                            You are about to create a duplicate . Do you want to proceed?
                            You are about to delete Do you want to proceed?
                            What would you like to rename your to?
                            Please enter a valid name
                            Please enter a name for the duplicate
                            Please enter a valid name
                            You are about to add to your My Solutions page. Do you want to proceed?
                            Please enter a valid name
                            Send a copy of

                            Please enter a valid Email
                            Please enter a valid name

                            We have found the following CAD Drawings

                            Select the files you are looking for and download them all at once

                            You should be logged to see your dashboard information
                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                            item(s) successfully added to the cart
                            View Cart