COVID-19: How WIDIA is responding
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (4)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (4)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (4)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (4)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (4)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (4)
  • M Stainless Steel (4)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4)
  • K Cast Iron (4)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (4)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (4)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (4)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum
      (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (4)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (4)
    • N6
      Carbon, Graphite Composites, CFRP
      (4)
    • N7
      MMC's
      (4)
  • S High-Temp Alloys (4)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (4)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (4)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (4)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (4)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC
      (4)
Applications
  • Back Boring Back Boring (4)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (4)
  • Blind Hole Finishing Blind Hole Finishing (4)
  • Chamfer Turning Chamfer Turning (4)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (4)
  • Facing Facing (4)
  • ID Grooving ID Grooving (4)
  • ID Thread Turning ID Thread Turning (4)
  • Multiple Direction Cutting Multiple Direction Cutting (4)
  • OD Thread Turning OD Thread Turning (4)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (4)
  • Threading Threading (4)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (4)
  • Through Hole Finishing Through Hole Finishing (4)
  • Turning Turning (4)
Type of Thread
  • 55 (4)
  • 60 (4)
  • ACME (4)
  • API RD (4)
  • BSPT (4)
  • BSW (4)
  • M (4)
  • NPT (4)
  • NPTF (4)
  • RD DIN 405 (4)
  • STUB ACME (4)
  • TR DIN 103 (4)
  • UN (4)
  • UNJ (4)
Tool Cutting Edge Angle
  • 90.0 (4)
to
Connection Style
  • KM (4)
Cutting Edges Per Insert
  • 3.0 (4)
to
Corner configuration
Corner Radius
  • 0.03 (1)
  • 0.038 (1)
  • 0.051 (4)
  • 0.07 (1)
  • 0.076 (4)
  • 0.08 (2)
  • 0.081 (1)
  • 0.082 (2)
  • 0.085 (2)
  • 0.086 (2)
  • 0.091 (2)
  • 0.097 (1)
  • 0.1 (2)
  • 0.102 (1)
  • 0.108 (1)
  • 0.135 (2)
  • 0.152 (1)
  • 0.159 (2)
  • 0.16 (1)
  • 0.178 (2)
  • 0.203 (3)
  • 0.21 (1)
  • 0.223 (2)
  • 0.24 (2)
  • 0.269 (2)
  • 0.279 (3)
  • 0.31 (1)
  • 0.318 (2)
  • 0.381 (2)
  • 0.7 (1)
  • 0.76 (2)
  • 0.936 (1)
to
Corner Radius
  • 0.0012 (1)
  • 0.0015 (1)
  • 0.002 (4)
  • 0.0028 (3)
  • 0.003 (4)
  • 0.0031 (2)
  • 0.0032 (3)
  • 0.0033 (2)
  • 0.0034 (2)
  • 0.0038 (1)
  • 0.0039 (2)
  • 0.004 (1)
  • 0.0043 (1)
  • 0.0053 (2)
  • 0.006 (1)
  • 0.0063 (3)
  • 0.007 (2)
  • 0.008 (3)
  • 0.0083 (1)
  • 0.0088 (2)
  • 0.0094 (2)
  • 0.0106 (2)
  • 0.011 (3)
  • 0.0122 (1)
  • 0.0125 (2)
  • 0.015 (2)
  • 0.0276 (1)
  • 0.0298 (2)
  • 0.0369 (1)
to
Application
Grade Of Cutting Tool
  • HCK20 (1)
  • K15 (1)
  • K68 (3)
  • KC5010 (4)
  • KC5025 (4)
  • KC710 (3)
  • KC720 (4)
  • KC722 (3)
  • KC730 (4)
  • KU25T (3)
  • P25 (1)
  • PN120 (2)
  • TN6025 (4)
  • TTS (2)
Hand Of Tool
  • L (2)
  • R (2)
Wiper Insert
  • N (4)
Minimum Axial Groove Diameter
  • 1.732 (1)
to
Minimum Axial Groove Diameter
  • 44.0 (1)
to
Cutting Direction
  • E (2)
  • S (2)
Rake Angle Style
  • DOUBLE NEGATIVE (4)
Maximum Bore Depth
  • 35.0 (1)
to
Maximum Bore Depth
  • 1.378 (1)
to
Boring Bar Material
  • S (1)
Front-End
Clamp Style
  • M (4)
Insert Shape
  • LT-TRIANGLE LAY DOWN THREAD 60 (4)
Insert Geometry
Cutting Tool Material
  • H W (4)
Back-End
Connection Type
  • TAPER SHANK (4)
System Size
  • KM32 (4)
Back-End Diameter
  • 1.2598 (4)
to
Back-End Diameter
  • 32.0 (4)
to
other
Platform
  • KM32 (3)
  • KM32TS (1)
Tool Unit
  • M (4)
Over All Length [L]
  • 35.0 (4)
to
Over All Length [L]
  • 1.378 (4)
to
Insert Hand
  • L (3)
  • R (3)
obsoleteFacet
  • false (4)
  • true (4)
No filters matching ""
View Products in
Metric
Inch
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert
1144372 KM32TSLSEL16E KM32TSLSEL16E 35.0000 1.378 22.0000 .8661 LT16ER
    List price:
    Discount: %
    Your price::
    Replacement This item is not available
    Replacement Product This item may be available through a distributor
    Qty
    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert
    1144357 KM32TSLSER16N KM32TSLSER16N 35.0000 1.378 22.0000 .8661 44.0000 1.732 LT16NR
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert
      1019299 KM32TSLSSL16 KM32TSLSSL16 35.0000 1.378 22.0000 .8661 LT16EL
        1019298 KM32TSLSSR16 KM32TSLSSR16 35.0000 1.378 22.0000 .8661 LT16ER
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
          You are about to create a duplicate . Do you want to proceed?
          You are about to delete Do you want to proceed?
          What would you like to rename your to?
          Please enter a valid name
          Please enter a name for the duplicate
          Please enter a valid name
          You are about to add to your My Solutions page. Do you want to proceed?
          Please enter a valid name
          Send a copy of

          Please enter a valid Email
          Please enter a valid name

          We have found the following CAD Drawings

          Select the files you are looking for and download them all at once

          You should be logged to see your dashboard information
          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
          item(s) successfully added to the cart
          View Cart