COVID-19: How WIDIA is responding

M200™ IC10 • Double-Sided Round Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (52)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (48)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (48)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (48)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (48)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (48)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (52)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (52)
  • M Stainless Steel (52)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (52)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (52)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (52)
  • K Cast Iron (42)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (42)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (42)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (42)
  • N Non-Ferrous Materials (35)
    • N1
      Wrought Aluminum
      (35)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (35)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (35)
  • S High-Temp Alloys (49)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (45)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (45)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (45)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (49)
  • H Hardened Materials (39)
    • H1
      Hardened Materials 44-48 HRC
      (39)
Select First Choice
  • US (4)
Applications
  • Chamfer Milling Chamfer Milling (30)
  • Countersinking Countersinking (30)
  • Drilling Drilling (30)
  • Face Milling Face Milling (30)
  • Flat Bottom Drilling Flat Bottom Drilling (30)
  • ID Thread Turning ID Thread Turning (24)
  • Pipe Thread Pipe Thread (30)
  • Pocket Pocket (30)
  • Pocket Helical Pocket Helical (30)
  • Pocket Milling Pocket Milling (30)
  • Pocket Plunge Milling Pocket Plunge Milling (30)
  • Profile Milling Profile Milling (30)
  • Ramping Ramping (30)
  • Shoulder Ball Nose Shoulder Ball Nose (30)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (30)
  • Shoulder Milling Shoulder Milling (30)
  • Shoulder Roughing Shoulder Roughing (30)
  • Shoulder Square End Shoulder Square End (30)
  • Slot Ball Nose Slot Ball Nose (30)
  • Slot Milling Slot Milling (30)
  • Slot Side Slot Side (30)
  • Slot Square End Slot Square End (30)
  • Slot T Slot T (30)
  • Thread Milling Thread Milling (30)
  • Threading Threading (30)
Cutting Diameter
  • 15.0 (5)
  • 15.4 (4)
  • 18.0 (1)
  • 21.75 (4)
  • 22.0 (4)
  • 25.0 (1)
  • 28.1 (3)
  • 30.0 (2)
  • 32.0 (1)
  • 40.0 (2)
  • 40.8 (2)
  • 42.0 (1)
to
Cutting Diameter
  • 0.591 (5)
  • 0.606 (4)
  • 0.709 (1)
  • 0.856 (4)
  • 0.866 (4)
  • 0.984 (1)
  • 1.106 (3)
  • 1.181 (2)
  • 1.26 (1)
  • 1.575 (2)
  • 1.606 (2)
  • 1.654 (1)
to
Cutting Length
  • 0.195 (16)
  • 0.196 (1)
  • 0.2 (13)
to
Cutting Length
  • 4.96 (17)
  • 5.0 (13)
to
Reach
  • 31.75 (1)
  • 32.0 (5)
  • 38.1 (6)
  • 40.0 (7)
  • 50.8 (2)
to
Reach
  • 1.25 (1)
  • 1.26 (5)
  • 1.5 (6)
  • 1.575 (7)
  • 2.0 (2)
to
Tool Cutting Edge Angle
  • 90.0 (30)
to
Connection Style
  • A-Socket Head Cap Screw (9)
  • Screw-On Connection (8)
  • Straight-Cylindrical (9)
  • Weldon (4)
Cutting Edges Per Insert
  • 0.0 (2)
  • 2.0 (52)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 5.0 (52)
  • -4999.5 (2)
to
Corner Radius
  • 0.1969 (52)
  • -4999.5 (2)
to
Application
Grade Of Cutting Tool
  • WK15CM (31)
  • WN25PM (31)
  • WP20CM (33)
  • WP25PM (34)
  • WP35CM (34)
  • WP40PM (32)
  • WS30PM (32)
  • WS40PM (34)
  • WU35PM (33)
Hand Of Tool
  • R (30)
Wiper Insert
  • N (22)
Maximum Ramp Angle
  • 0.31 (2)
  • 0.32 (3)
  • 0.37 (2)
  • 0.38 (1)
  • 0.39 (1)
  • 0.4 (1)
  • 0.41 (1)
  • 0.45 (1)
  • 0.49 (8)
  • 0.55 (1)
  • 0.6 (9)
to
Front-End
Insert Shape
  • R-ROUND (54)
Center Cutting
Insert Geometry
Shape
  • R-ROUND (24)
Insert IC Size
  • 0.3937 (22)
to
Insert IC Size
  • 10.0 (22)
to
Cutting Tool Material
  • H W (24)
Chip Breaker CBMD
  • ALP (1)
  • MH (7)
  • ML (5)
  • MM (9)
Tolerance Class
  • G (10)
  • P (12)
Back-End
Connection Type
  • CYLINDRICAL (13)
  • SCREW-ON (8)
  • SHELL MILL (9)
Back-End Diameter
  • 0.5 (2)
  • 0.63 (2)
  • 0.75 (2)
  • 0.827 (2)
  • 0.866 (3)
  • 0.984 (4)
  • 1.0 (3)
  • 1.142 (6)
  • 1.25 (2)
  • 1.26 (4)
to
Back-End Diameter
  • 12.7 (2)
  • 16.0 (2)
  • 19.05 (2)
  • 21.0 (2)
  • 22.0 (3)
  • 25.0 (4)
  • 25.4 (3)
  • 29.0 (6)
  • 31.7 (2)
  • 32.0 (4)
to
other
Grade
  • WK15CM (1)
  • WN25PM (1)
  • WP20CM (3)
  • WP25PM (4)
  • WP35CM (4)
  • WP40PM (2)
  • WS30PM (2)
  • WS40PM (4)
  • WU35PM (3)
Platform
  • M200 Series (49)
Tool Unit
  • I (33)
  • M (45)
Over All Length [L]
  • 39.88 (2)
  • 40.0 (4)
  • 50.0 (1)
  • 50.8 (2)
  • 89.0 (1)
  • 101.0 (1)
  • 108.71 (2)
  • 150.0 (2)
  • 152.4 (1)
  • 200.0 (3)
  • 203.2 (1)
  • 228.6 (1)
  • 250.0 (1)
to
Over All Length [L]
  • 1.57 (2)
  • 1.575 (4)
  • 1.969 (1)
  • 2.0 (2)
  • 3.504 (1)
  • 3.976 (1)
  • 4.28 (2)
  • 5.906 (2)
  • 6.0 (1)
  • 7.874 (3)
  • 8.0 (1)
  • 9.0 (1)
  • 9.843 (1)
to
Head Length [L2]
  • 31.75 (1)
  • 32.0 (5)
  • 38.1 (6)
  • 40.0 (7)
  • 50.8 (2)
to
Head Length [L2]
  • 1.25 (1)
  • 1.26 (5)
  • 1.5 (6)
  • 1.575 (7)
  • 2.0 (2)
to
Insert Hand
  • N (22)
obsoleteFacet
  • true (54)
  • false (49)
Number of Inserts
  • 3.0 (15)
  • 4.0 (6)
  • 5.0 (4)
  • 6.0 (5)
to
No filters matching ""
View Products in
Metric
Inch
Copy Mills • M200™ Series

Shell Mills • Inch
(4 Products)
  • Milling - Side and FaceMilling - Side and Face
  • 3D Profiling3D Profiling
  • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
  • PocketingPocketing
  • Milling - Through CoolantMilling - Through Coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
5283482 M200D150Z05S050RN10 M200D150Z05S050RN10   38.1000 1.500 28.1000 1.106 12.7 .5 33.0200 1.300 39.8800 1.570 5.0000 .2000 5 0.370 44300 Y 0.43
    5283484 M200D200Z06S075RN10 M200D200Z06S075RN10   50.8000 2.000 40.8000 1.606 19.05 .75 42.0000 1.654 50.8000 2.000 5.0000 .2000 6 0.320 38300 Y 1.02
      5283481 M200D150Z03S050RN10 M200D150Z03S050RN10   38.1000 1.500 28.1000 1.106 12.7 .5 33.0200 1.300 39.8800 1.570 5.0000 .2000 3 0.410 44300 Y 0.46
        5283483 M200D200Z04S075RN10 M200D200Z04S075RN10   50.8000 2.000 40.8000 1.606 19.05 .75 42.0000 1.654 50.8000 2.000 5.0000 .2000 4 0.310 38300 Y 1.04
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          Copy Mills • M200™ • IC10

          Inserts • RNPJ-MH
          (7 Products)
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Number of Indexes [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
          5276243 RNPJ10T3M0SMH RNPJ10T3M0SMH   WK15CM 8 10.0000 .3937 3.9300 .1547 0.1750 .0069
            5276199 RNPJ10T3M0SMH RNPJ10T3M0SMH   WP35CM 8 10.0000 .3937 3.9300 .1547 0.1750 .0069
              5276240 RNPJ10T3M0SMH RNPJ10T3M0SMH   WP25PM 8 10.0000 .3937 3.9300 .1547 0.1750 .0069
                5276241 RNPJ10T3M0SMH RNPJ10T3M0SMH   WP20CM 8 10.0000 .3937 3.9300 .1547 0.1750 .0069
                  5476633 RNPJ10T3M0SMH RNPJ10T3M0SMH   WU35PM 8 10.0000 .3937 3.9300 .1547 0.1750 .0069
                    5542328 RNPJ10T3M0SMH RNPJ10T3M0SMH   WP40PM 8 10.0000 .3937 3.9300 .1547 0.1750 .0069
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      Copy Mills • M200™ • IC10

                      Inserts • RNPJ-MM
                      (5 Products)
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Number of Indexes [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
                      5276196 RNPJ10T3M0SMM RNPJ10T3M0SMM   WP35CM 8 10.0000 .3937 3.9310 .1548 0.0870 .0034
                        5276197 RNPJ10T3M0SMM RNPJ10T3M0SMM   WP25PM 8 10.0000 .3937 3.9310 .1548 0.0870 .0034
                          5276198 RNPJ10T3M0SMM RNPJ10T3M0SMM   WP20CM 8 10.0000 .3937 3.9310 .1548 0.0870 .0034
                            5542327 RNPJ10T3M0SMM RNPJ10T3M0SMM   WP40PM 8 10.0000 .3937 3.9310 .1548 0.0870 .0034
                              6408151 RNPJ10T3M0SMM RNPJ10T3M0SMM   WS40PM 8 10.0000 .3937 3.9310 .1548 0.0870 .0034
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor
                                Qty
                                Copy Mills • M200™ Series

                                IC10 • Inserts • RN.J10…
                                (6 Products)
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Number of Indexes [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
                                5274458 RNGJ10T3M0SMM *DO NOT USE* RNGJ10T3M0SMM *DO NOT USE* WP35CM 8            
                                  5274459 RNGJ10T3M0SMM *DO NOT USE* RNGJ10T3M0SMM *DO NOT USE* WP20CM 8            
                                    5274511 RNGJ10T3M0SMM RNGJ10T3M0SMM WP25PM 8 10.0000 .3937 3.9310 .1548 0.0870 .0034
                                      5274512 RNGJ10T3M0SMM RNGJ10T3M0SMM WU35PM 8 10.0000 .3937 3.9310 .1548 0.0870 .0034
                                        5520353 RNGJ10T3M0SMM RNGJ10T3M0SMM WS30PM 8 10.0000 .3937 3.9310 .1548 0.0870 .0034
                                          6291550 RNGJ10T3M0SMM RNGJ10T3M0SMM WS40PM 8 10.0000 .3937 3.9310 .1548 0.0870 .0034
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty
                                            Copy Mills • M200™ Series

                                            Cylindrical End Mills
                                            (3 Products)
                                            • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                            • 3D Profiling3D Profiling
                                            • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                            • Slotting: Square EndSlotting: Square End
                                            • Face MillingFace Milling
                                            • PocketingPocketing
                                            • Milling - Through CoolantMilling - Through Coolant
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                            5283438 M200D100Z03C100RN10L600 M200D100Z03C100RN10L600 25.4000 1.000 15.4000 .6060 25.4 1.0 152.4000 6.000 38.1000 1.500 5.0000 .2000 3 0.600 54200 Y 1.15
                                              5283439 M200D100Z03C100RN10L800 M200D100Z03C100RN10L800 25.4000 1.000 15.4000 .6060 25.4 1.0 203.2000 8.000 38.1000 1.500 5.0000 .2000 3 0.600 54200 Y 1.58
                                                5283480 M200D125Z03C125RN10L900 M200D125Z03C125RN10L900 31.7500 1.250 21.7500 .8560 31.7 1.25 228.6000 9.000 38.1000 1.500 5.0000 .2000 3 0.490 48500 Y 2.85
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty
                                                  Copy Mills • M200™ Series

                                                  IC10 • Screw-On End Mills
                                                  (4 Products)
                                                  • Shank - Screw-OnShank - Screw-On
                                                  • 3D Profiling3D Profiling
                                                  • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                  • Slotting: Square EndSlotting: Square End
                                                  • Face MillingFace Milling
                                                  • PocketingPocketing
                                                  • Milling - Through CoolantMilling - Through Coolant
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                                  5283432 M200D100Z03M12RN10 M200D100Z03M12RN10 25.4000 1.000 15.4000 .6060 21.0 .827 12.5000 .4900 M12 31.7500 1.250 16.9500 .6670 5.0000 .2000 3 0.600 54200 Y 0.16
                                                    5283433 M200D125Z03M16RN10 M200D125Z03M16RN10 31.7500 1.250 21.7500 .8560 29.0 1.142 17.0000 .6700 M16 38.1000 1.500 23.9500 .9430 5.0000 .2000 3 0.490 48500 Y 0.38
                                                      5283434 M200D125Z04M16RN10 M200D125Z04M16RN10 31.7500 1.250 21.7500 .8560 29.0 1.142 17.0000 .6700 M16 38.1000 1.500 23.9500 .9430 5.0000 .2000 4 0.490 48500 Y 0.38
                                                        5283435 M200D150Z05M16RN10 M200D150Z05M16RN10 38.1000 1.500 28.1000 1.106 29.0 1.142 17.0000 .6700 M16 38.1000 1.500 23.9500 .9430 5.0000 .2000 5 0.370 44300 Y 0.45
                                                          List price:
                                                          Discount: %
                                                          Your price::
                                                          Replacement This item is not available
                                                          Replacement Product This item may be available through a distributor
                                                          Qty
                                                          Copy Mills • M200™ Series

                                                          IC10 • Weldon® Shanks
                                                          (2 Products)
                                                          • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                                                          • 3D Profiling3D Profiling
                                                          • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                          • Slotting: Square EndSlotting: Square End
                                                          • Face MillingFace Milling
                                                          • PocketingPocketing
                                                          • Milling - Through CoolantMilling - Through Coolant
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                                          5283436 M200D100Z03W100RN10 M200D100Z03W100RN10 25.4000 1.000 15.4000 .6060 25.4 1.0 108.7100 4.280 50.8000 2.000 5.0000 .2000 3 0.600 54200 Y 0.76
                                                            5283437 M200D125Z03W125RN10 M200D125Z03W125RN10 31.7500 1.250 21.7500 .8560 31.7 1.25 108.7100 4.280 50.8000 2.000 5.0000 .2000 3 0.490 48500 Y 1.20
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              Qty
                                                              Copy Mills • M200™ Series

                                                              IC10 • Cylindrical End Mills
                                                              (6 Products)
                                                              • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                                              • 3D Profiling3D Profiling
                                                              • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                              • Slotting: Square EndSlotting: Square End
                                                              • Face MillingFace Milling
                                                              • PocketingPocketing
                                                              • Milling - Through CoolantMilling - Through Coolant
                                                              View Products
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                                              5210279 M200D25Z03A25RN10L150 M200D25Z03A25RN10L150 25.0000 .9840 15.0000 .5910 25.0 .984 150.0000 5.906 32.0000 1.260 4.9600 .1950 3 0.600 54700 Y 0.50
                                                                5210300 M200D25Z03A25RN10L200 M200D25Z03A25RN10L200 25.0000 .9840 15.0000 .5910 25.0 .984 200.0000 7.874 32.0000 1.260 4.9600 .1950 3 0.600 54700 Y 0.69
                                                                  5210301 M200D25Z03A32RN10L250 M200D25Z03A32RN10L250 25.0000 .9840 15.0000 .5910 32.0 1.26 250.0000 9.843 32.0000 1.260 4.9600 .1950 3 0.600 54700 Y 1.42
                                                                    5210302 M200D28Z03A25RN10L200 M200D28Z03A25RN10L200 28.0000 1.102 18.0000 .7090 25.0 .984 200.0000 7.874 40.0000 1.575 4.9600 .1950 3 0.550 51600 Y 0.70
                                                                      5210304 M200D32Z03A32RN10L200 M200D32Z03A32RN10L200 32.0000 1.260 22.0000 .8660 32.0 1.26 200.0000 7.874 40.0000 1.575 4.9600 .1950 3 0.490 48300 Y 1.14
                                                                        5210303 M200D32Z04A32RN10L150 M200D32Z04A32RN10L150 32.0000 1.260 22.0000 .8660 32.0 1.26 150.0000 5.906 40.0000 1.575 4.9600 .1950 4 0.490 48300 Y 0.83
                                                                          List price:
                                                                          Discount: %
                                                                          Your price::
                                                                          Replacement This item is not available
                                                                          Replacement Product This item may be available through a distributor
                                                                          Qty
                                                                          Copy Mills • M200™ Series

                                                                          IC10 • Weldon® Shanks
                                                                          (2 Products)
                                                                          • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                                                                          • 3D Profiling3D Profiling
                                                                          • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                                          • Slotting: Square EndSlotting: Square End
                                                                          • Face MillingFace Milling
                                                                          • PocketingPocketing
                                                                          • Milling - Through CoolantMilling - Through Coolant
                                                                          View Products
                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                                                          5210277 M200D25Z03B25RN10 M200D25Z03B25RN10 25.0000 .9840 15.0000 .5910 25.0 .984 89.0000 3.504 40.0000 1.575 4.9600 .1950 3 0.600 54700 Y 0.27
                                                                            5210278 M200D32Z04B32RN10 M200D32Z04B32RN10 32.0000 1.260 22.0000 .8660 32.0 1.26 101.0000 3.976 40.0000 1.575 4.9600 .1950 4 0.490 48300 Y 0.52
                                                                              List price:
                                                                              Discount: %
                                                                              Your price::
                                                                              Replacement This item is not available
                                                                              Replacement Product This item may be available through a distributor
                                                                              Qty
                                                                              Copy Mills • M200™ Series

                                                                              IC10 • Screw-On End Mills
                                                                              (4 Products)
                                                                              • Shank - Screw-OnShank - Screw-On
                                                                              • 3D Profiling3D Profiling
                                                                              • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                                              • Slotting: Square EndSlotting: Square End
                                                                              • Face MillingFace Milling
                                                                              • PocketingPocketing
                                                                              • Milling - Through CoolantMilling - Through Coolant
                                                                              View Products
                                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                                                              5210273 M200D25Z03M12RN10 M200D25Z03M12RN10 25.0000 .9840 15.0000 .5910 21.0 .827 12.5000 .4900 M12 32.0000 1.260 16.9500 .6670 4.9600 .1950 3 0.600 54700 Y 0.08
                                                                                5210274 M200D32Z04M16RN10 M200D32Z04M16RN10 32.0000 1.260 22.0000 .8660 29.0 1.142 17.0000 .6700 M16 40.0000 1.575 23.9500 .9430 4.9600 .1950 4 0.490 48300 Y 0.18
                                                                                  5210275 M200D35Z05M16RN10 M200D35Z05M16RN10 35.0000 1.378 25.0000 .9840 29.0 1.142 17.0000 .6700 M16 40.0000 1.575 23.9500 .9430 4.9600 .1950 5 0.450 46200 Y 0.20
                                                                                    5210276 M200D42Z06M16RN10 M200D42Z06M16RN10 42.0000 1.654 32.0000 1.260 29.0 1.142 17.0000 .6700 M16 40.0000 1.575 24.7500 .9740 4.9600 .1960 6 0.380 42200 Y 0.24
                                                                                      List price:
                                                                                      Discount: %
                                                                                      Your price::
                                                                                      Replacement This item is not available
                                                                                      Replacement Product This item may be available through a distributor
                                                                                      Qty
                                                                                      Copy Mills • M200™ Series

                                                                                      IC10 • Shell Mills
                                                                                      (5 Products)
                                                                                      • Milling - Side and FaceMilling - Side and Face
                                                                                      • 3D Profiling3D Profiling
                                                                                      • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                                                      • Slotting: Square EndSlotting: Square End
                                                                                      • Face MillingFace Milling
                                                                                      • PocketingPocketing
                                                                                      • Milling - Through CoolantMilling - Through Coolant
                                                                                      View Products
                                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                                                                      5210305 M200D40Z04RN10 M200D40Z04RN10 40.0000 1.575 30.0000 1.181 16.0 .63 38.0000 1.496 40.0000 1.575 4.9600 .1950 4 0.390 43200 Y 0.23
                                                                                        5210306 M200D40Z06RN10 M200D40Z06RN10 40.0000 1.575 30.0000 1.181 16.0 .63 38.0000 1.496 40.0000 1.575 4.9600 .1950 6 0.400 43200 Y 0.24
                                                                                          5210307 M200D50Z05RN10 M200D50Z05RN10 50.0000 1.969 40.0000 1.575 22.0 .866 42.0000 1.654 40.0000 1.575 4.9600 .1950 5 0.320 38600 Y 0.32
                                                                                            5210308 M200D50Z06RN10 M200D50Z06RN10 50.0000 1.969 40.0000 1.575 22.0 .866 42.0000 1.654 40.0000 1.575 4.9600 .1950 6 0.320 38600 Y 0.32
                                                                                              5210309 M200D52Z06RN10 M200D52Z06RN10 52.0000 2.047 42.0000 1.654 22.0 .866 49.0000 1.929 50.0000 1.969 4.9600 .1950 6 0.310 37900 Y 0.52
                                                                                                List price:
                                                                                                Discount: %
                                                                                                Your price::
                                                                                                Replacement This item is not available
                                                                                                Replacement Product This item may be available through a distributor
                                                                                                Qty
                                                                                                Copy Mills • M200™ Series

                                                                                                IC10 • Inserts • RN.J10…
                                                                                                (5 Products)
                                                                                                View Products
                                                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Number of Indexes [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                                                5274456 RNGJ10T3M0EML RNGJ10T3M0EML WP25PM 8 10.0000 .3937 3.9310 .1548 0.0380 .0015
                                                                                                  5274455 RNGJ10T3M0EML RNGJ10T3M0EML WP35CM 8 10.0000 .3937 3.9310 .1548 0.0380 .0015
                                                                                                    5274457 RNGJ10T3M0EML RNGJ10T3M0EML WU35PM 8 10.0000 .3937 3.9310 .1548 0.0380 .0015
                                                                                                      5520352 RNGJ10T3M0EML RNGJ10T3M0EML WS30PM 8 10.0000 .3937 3.9310 .1548 0.0380 .0015
                                                                                                        6383656 RNGJ10T3M0EML RNGJ10T3M0EML WS40PM 8 10.0000 .3937 3.9310 .1548 0.0380 .0015
                                                                                                          List price:
                                                                                                          Discount: %
                                                                                                          Your price::
                                                                                                          Replacement This item is not available
                                                                                                          Replacement Product This item may be available through a distributor
                                                                                                          Qty
                                                                                                          Copy Mills • M200™ Series

                                                                                                          IC10 • Inserts • RN.J10…
                                                                                                          (1 Products)
                                                                                                          View Products
                                                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Number of Indexes [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                                                          6065590 RNGJ10T3M0FALP RNGJ10T3M0FALP WN25PM 8 10.0000 .3937 3.9310 .1548 0.0200 .0008
                                                                                                            List price:
                                                                                                            Discount: %
                                                                                                            Your price::
                                                                                                            Replacement This item is not available
                                                                                                            Replacement Product This item may be available through a distributor
                                                                                                            Qty
                                                                                                            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                                                            You are about to create a duplicate . Do you want to proceed?
                                                                                                            You are about to delete Do you want to proceed?
                                                                                                            What would you like to rename your to?
                                                                                                            Please enter a valid name
                                                                                                            Please enter a name for the duplicate
                                                                                                            Please enter a valid name
                                                                                                            You are about to add to your My Solutions page. Do you want to proceed?
                                                                                                            Please enter a valid name
                                                                                                            Send a copy of

                                                                                                            Please enter a valid Email
                                                                                                            Please enter a valid name

                                                                                                            We have found the following CAD Drawings

                                                                                                            Select the files you are looking for and download them all at once

                                                                                                            You should be logged to see your dashboard information
                                                                                                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                                                            item(s) successfully added to the cart
                                                                                                            View Cart