Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

M100 Series

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Select First Choice
  • CN (14)
  • DE (39)
  • GB (3)
  • US (11)
Applications
  • Face Milling Face Milling (58)
  • Pocket Pocket (58)
  • Pocket Helical Pocket Helical (56)
  • Pocket Milling Pocket Milling (58)
  • Profile Milling Profile Milling (58)
  • Ramping Ramping (58)
  • Shoulder Ball Nose Shoulder Ball Nose (58)
  • Shoulder Milling Shoulder Milling (58)
  • Slot Milling Slot Milling (58)
  • Slot Square End Slot Square End (58)
Workpiece Material
  • P Steel (128)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (126)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (128)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (128)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (121)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (121)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (115)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (115)
  • M Stainless Steel (106)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (106)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (106)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (106)
  • K Cast Iron (114)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (114)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (114)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (114)
  • N Non-Ferrous Materials (55)
    • N1
      Wrought Aluminum
      (55)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (55)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (55)
  • S High-Temp Alloys (70)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (66)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (66)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (66)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (70)
  • H Hardened Materials (52)
    • H1
      Hardened Materials 44-48 HRC
      (52)
    • H2
      Hardened Materials 48-55 HRC
      (51)
    • H3
      Hardened Materials 56-60 HRC
      (51)
Maximum Cutting Diameter
  • 0.4724 (2)
  • 0.625 (8)
  • 0.6299 (3)
  • 0.75 (9)
  • 0.7874 (3)
  • 0.9449 (1)
  • 0.9843 (1)
  • 1.0 (8)
  • 1.0236 (2)
  • 1.1811 (1)
  • 1.25 (4)
  • 1.2598 (1)
  • 1.378 (1)
  • 1.5 (1)
  • 1.5748 (1)
  • 1.9685 (3)
  • 2.0 (4)
  • 2.047 (1)
  • 2.0472 (1)
  • 2.4803 (3)
  • 2.5 (1)
  • 2.5984 (1)
  • 3.0 (1)
  • 3.15 (3)
  • 3.937 (3)
  • 4.0 (2)
  • 4.9213 (2)
  • 6.0 (1)
  • 6.2992 (1)
to
Maximum Cutting Diameter
  • 12.0 (2)
  • 15.875 (8)
  • 16.0 (3)
  • 19.05 (9)
  • 20.0 (3)
  • 24.0 (1)
  • 25.0 (1)
  • 25.4 (8)
  • 26.0 (2)
  • 30.0 (1)
  • 31.75 (4)
  • 32.0 (1)
  • 35.0 (1)
  • 38.1 (1)
  • 40.0 (1)
  • 50.0 (3)
  • 50.8 (4)
  • 52.0 (2)
  • 63.0 (3)
  • 63.5 (1)
  • 66.0 (1)
  • 76.2 (1)
  • 80.0 (3)
  • 100.0 (3)
  • 101.6 (2)
  • 125.0 (2)
  • 152.4 (1)
  • 160.0 (1)
to
Cutting Diameter
  • 4.0 (2)
  • 7.874 (8)
  • 8.0 (3)
  • 9.042 (5)
  • 10.0 (3)
  • 11.049 (4)
  • 12.0 (1)
  • 14.783 (5)
  • 15.0 (1)
  • 15.392 (3)
  • 16.0 (3)
  • 19.761 (3)
  • 19.781 (1)
  • 20.0 (1)
  • 23.0 (1)
  • 26.111 (1)
  • 28.0 (1)
  • 34.0 (2)
  • 34.798 (2)
  • 36.0 (1)
  • 38.0 (1)
  • 38.862 (2)
  • 40.0 (1)
  • 47.0 (2)
  • 50.0 (1)
  • 51.0 (1)
  • 51.511 (1)
  • 64.0 (2)
  • 64.211 (1)
  • 68.0 (1)
  • 84.0 (2)
  • 85.598 (2)
  • 88.0 (1)
  • 109.0 (2)
  • 136.398 (1)
  • 144.0 (1)
to
Cutting Diameter
  • 0.1575 (2)
  • 0.31 (8)
  • 0.315 (3)
  • 0.356 (5)
  • 0.3937 (3)
  • 0.435 (4)
  • 0.4724 (1)
  • 0.528 (5)
  • 0.5906 (1)
  • 0.606 (3)
  • 0.6299 (3)
  • 0.778 (4)
  • 0.7874 (1)
  • 0.9055 (1)
  • 1.028 (1)
  • 1.1024 (1)
  • 1.3386 (2)
  • 1.37 (2)
  • 1.4173 (1)
  • 1.4961 (1)
  • 1.53 (2)
  • 1.575 (1)
  • 1.8504 (2)
  • 1.9685 (1)
  • 2.0079 (1)
  • 2.028 (1)
  • 2.5197 (2)
  • 2.528 (1)
  • 2.6772 (1)
  • 3.3071 (2)
  • 3.37 (2)
  • 3.4646 (1)
  • 4.2913 (2)
  • 5.37 (1)
  • 5.6693 (1)
to
Cutting Length
  • 0.1575 (17)
  • 0.1969 (15)
  • 0.236 (1)
  • 0.2362 (21)
  • 0.315 (19)
to
Cutting Length
  • 4.0 (17)
  • 5.0 (15)
  • 6.0 (22)
  • 8.0 (19)
to
Reach
  • 30.0 (2)
  • 40.0 (6)
  • 41.91 (1)
  • 44.196 (3)
  • 44.45 (1)
  • 60.96 (1)
  • 63.246 (3)
  • 63.5 (1)
  • 76.2 (1)
  • 77.724 (1)
  • 78.994 (1)
  • 79.756 (2)
  • 80.0 (4)
  • 81.026 (1)
  • 82.0 (1)
  • 82.55 (1)
  • 98.044 (1)
  • 98.806 (1)
  • 99.822 (1)
  • 101.6 (1)
  • 110.236 (1)
  • 114.3 (1)
  • 115.824 (1)
  • 118.872 (1)
  • 120.65 (2)
  • 123.698 (1)
  • 125.0 (3)
  • 129.286 (1)
  • 131.826 (1)
to
Reach
  • 1.1811 (2)
  • 1.5748 (6)
  • 1.65 (1)
  • 1.74 (3)
  • 1.75 (1)
  • 2.4 (1)
  • 2.49 (3)
  • 2.5 (1)
  • 3.0 (1)
  • 3.06 (1)
  • 3.11 (1)
  • 3.14 (2)
  • 3.1496 (4)
  • 3.19 (1)
  • 3.228 (1)
  • 3.25 (1)
  • 3.86 (1)
  • 3.89 (1)
  • 3.93 (1)
  • 4.0 (1)
  • 4.34 (1)
  • 4.5 (1)
  • 4.56 (1)
  • 4.68 (1)
  • 4.75 (2)
  • 4.87 (1)
  • 4.9213 (3)
  • 5.09 (1)
  • 5.19 (1)
to
Tool Cutting Edge Angle
  • 90.0 (73)
to
Connection Style
  • A-Socket Head Cap Screw (14)
  • B-Cutter Retention Screw (12)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (5)
  • Weldon (41)
Cutting Edges Per Insert
  • 1.0 (157)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 4.0 (20)
  • 5.0 (28)
  • 6.0 (46)
  • 8.0 (63)
to
Corner Radius
  • 0.1575 (20)
  • 0.1969 (28)
  • 0.236 (23)
  • 0.2362 (42)
  • 0.315 (63)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • THM (53)
  • TN2510 (51)
  • TN25M (27)
  • TN450 (53)
  • TN5015 (1)
  • TN5020 (1)
  • TN5515 (51)
  • TN6525 (58)
  • TN6540 (63)
  • TN7010 (1)
  • TN7015 (1)
  • TN7025 (1)
  • TN7035 (1)
  • TN7110 (1)
  • TN7115 (1)
  • TN7125 (1)
  • TN7135 (1)
  • TN7525 (54)
  • TN7535 (55)
  • TN8025 (1)
  • TTI25 (49)
  • TTM (27)
  • TTM08 (44)
  • TTM09 (6)
  • WK15CM (29)
  • WP35CM (56)
  • WS30PM (20)
  • WS40PM (21)
Hand Of Tool
  • R (73)
Maximum Ramp Angle
  • 1.25 (1)
  • 1.75 (1)
  • 2.0 (2)
  • 2.25 (1)
  • 2.5 (1)
  • 2.75 (2)
  • 3.5 (1)
  • 3.75 (2)
  • 4.0 (1)
  • 4.5 (1)
  • 4.75 (1)
  • 5.0 (1)
  • 5.75 (1)
  • 6.0 (1)
  • 6.5 (1)
  • 6.75 (1)
  • 7.0 (4)
  • 7.5 (4)
  • 7.75 (2)
  • 8.0 (1)
  • 8.25 (1)
  • 8.75 (1)
  • 10.0 (6)
  • 10.25 (2)
  • 10.75 (1)
  • 12.0 (2)
  • 13.5 (1)
  • 14.25 (1)
  • 15.75 (1)
  • 17.0 (3)
  • 22.0 (4)
  • 23.0 (4)
  • 27.0 (1)
  • 40.0 (5)
  • 50.0 (5)
  • 60.0 (5)
to
Wiper Insert
  • N (101)
Front-End
Insert Shape
  • R-ROUND (157)
Center Cutting
Insert Geometry
Shape
  • R-ROUND (101)
Insert IC Size
  • 0.315 (14)
  • 0.3937 (15)
  • 0.472 (4)
  • 0.4724 (23)
  • 0.6299 (45)
to
Insert IC Size
  • 8.0 (14)
  • 10.0 (15)
  • 12.0 (27)
  • 16.0 (45)
to
Chip Breaker CBMD
  • 43 (18)
  • MMX (4)
  • X (31)
Cutting Tool Material
  • H T (5)
  • H W (96)
Tolerance Class
  • H (3)
  • M (94)
  • P (4)
Back-End
Connection Type
  • CYLINDRICAL (41)
  • SCREW-ON (5)
  • SHELL MILL (27)
Back-End Diameter
  • 0.625 (4)
  • 0.6299 (3)
  • 0.75 (11)
  • 0.7874 (2)
  • 0.8661 (7)
  • 0.9843 (3)
  • 1.0 (11)
  • 1.063 (7)
  • 1.1024 (3)
  • 1.25 (9)
  • 1.2598 (6)
  • 1.5 (3)
  • 1.5748 (3)
  • 2.0 (1)
to
Back-End Diameter
  • 15.875 (4)
  • 16.0 (3)
  • 19.05 (11)
  • 20.0 (2)
  • 22.0 (7)
  • 25.0 (3)
  • 25.4 (11)
  • 27.0 (7)
  • 28.0 (3)
  • 31.75 (9)
  • 32.0 (6)
  • 38.1 (3)
  • 40.0 (3)
  • 50.8 (1)
to
other
Grade
  • THM (9)
  • TN2510 (7)
  • TN25M (2)
  • TN450 (9)
  • TN5015 (1)
  • TN5020 (1)
  • TN5515 (7)
  • TN6525 (6)
  • TN6540 (11)
  • TN7010 (1)
  • TN7015 (1)
  • TN7025 (1)
  • TN7035 (1)
  • TN7110 (1)
  • TN7115 (1)
  • TN7125 (1)
  • TN7135 (1)
  • TN7525 (10)
  • TN7535 (11)
  • TN8025 (1)
  • TTI25 (5)
  • TTM (2)
  • TTM08 (6)
  • W (73)
  • WK15CM (2)
  • WS30PM (1)
  • WS40PM (2)
Platform
  • M100 Series (109)
Tool Unit
  • I (140)
  • M (135)
Display Configurable Products
  • false (174)
Category Path
Over All Length [L]
  • 40.0 (9)
  • 41.402 (4)
  • 44.45 (1)
  • 50.0 (8)
  • 50.8 (3)
  • 52.0 (2)
  • 63.0 (4)
  • 63.5 (1)
  • 72.71 (2)
  • 90.0 (2)
  • 92.0 (1)
  • 96.012 (2)
  • 111.76 (2)
  • 115.062 (2)
  • 121.412 (1)
  • 130.0 (1)
  • 132.0 (1)
  • 134.112 (3)
  • 137.16 (1)
  • 138.0 (1)
  • 140.462 (3)
  • 142.0 (2)
  • 153.162 (1)
  • 156.21 (1)
  • 159.512 (1)
  • 162.56 (1)
  • 172.212 (1)
  • 178.562 (3)
  • 179.07 (1)
  • 181.61 (2)
  • 183.0 (2)
  • 184.15 (1)
  • 187.0 (1)
  • 189.484 (1)
  • 203.2 (1)
to
Over All Length [L]
  • 1.5748 (8)
  • 1.575 (1)
  • 1.63 (4)
  • 1.75 (1)
  • 1.9685 (8)
  • 2.0 (3)
  • 2.0472 (2)
  • 2.4803 (4)
  • 2.5 (1)
  • 3.5433 (2)
  • 3.622 (1)
  • 3.65 (2)
  • 3.78 (2)
  • 4.4 (2)
  • 4.53 (2)
  • 4.78 (1)
  • 5.1181 (1)
  • 5.1969 (1)
  • 5.28 (3)
  • 5.4 (1)
  • 5.4331 (1)
  • 5.53 (3)
  • 5.59 (1)
  • 5.5906 (1)
  • 6.03 (1)
  • 6.15 (1)
  • 6.28 (1)
  • 6.4 (1)
  • 6.78 (1)
  • 7.03 (3)
  • 7.05 (1)
  • 7.15 (2)
  • 7.2047 (2)
  • 7.25 (1)
  • 7.3622 (1)
  • 7.46 (1)
  • 8.0 (1)
to
Head Length [L2]
  • 30.0 (2)
  • 40.0 (3)
  • 42.0 (3)
  • 44.196 (2)
  • 44.45 (2)
  • 63.246 (2)
  • 63.5 (3)
  • 76.2 (1)
  • 79.248 (1)
  • 82.0 (5)
  • 82.55 (5)
  • 98.298 (1)
  • 101.6 (2)
  • 104.648 (1)
  • 114.3 (1)
  • 115.824 (1)
  • 120.65 (3)
  • 123.698 (3)
  • 127.0 (3)
  • 131.826 (1)
  • 134.874 (1)
to
Head Length [L2]
  • 1.1811 (2)
  • 1.5748 (3)
  • 1.6535 (3)
  • 1.74 (2)
  • 1.75 (2)
  • 2.49 (2)
  • 2.5 (3)
  • 3.0 (1)
  • 3.12 (1)
  • 3.228 (1)
  • 3.2283 (4)
  • 3.25 (5)
  • 3.87 (1)
  • 4.0 (2)
  • 4.12 (1)
  • 4.5 (1)
  • 4.56 (1)
  • 4.75 (3)
  • 4.87 (3)
  • 5.0 (3)
  • 5.19 (1)
  • 5.31 (1)
to
Number of Inserts
  • 1.0 (5)
  • 2.0 (37)
  • 3.0 (4)
  • 4.0 (9)
  • 5.0 (5)
  • 6.0 (5)
  • 7.0 (5)
  • 8.0 (1)
  • 9.0 (2)
to
Insert Hand
  • N (101)
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Copy Mills • M100™ • IC16

Inserts • RCMT-TX
(9 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
2012418 RCMT1606M0TX RCMT1606M0TX   TN7525 1 16.0000 .6299 6.3500 .2500 0.2400 .0094
    List price:
    $19.18 /each.
    Your price::
    2020781 RCMT1606M0TX RCMT1606M0TX   TN7535 1 16.0000 .6299 6.3500 .2500 0.2400 .0094
      List price:
      $19.18 /each.
      Your price::
      2957427 RCMT1606M0TX RCMT1606M0TX   TN6540 1 16.0000 .6299 6.3500 .2500 0.2400 .0094
        List price:
        $17.90 /each.
        Your price::
        2957535 RCMT1606M0TX RCMT1606M0TX   TN6525 1 16.0000 .6299 6.3500 .2500 0.2400 .0094
          List price:
          $17.90 /each.
          Your price::
          5427442 RCMT1606M0TX RCMT1606M0TX   WK15CM 1 16.0000 .6299 6.3500 .2500 0.2400 .0094
            List price:
            $19.18 /each.
            Your price::
            2020785 RCMT1606M0TX RCMT1606M0TX   TN5515 1 16.0000 .6299 6.3500 .2500 0.2400 .0094
              This item is not available
              Replacement Product 5427442
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Copy Mills • M100™ • IC16

              Inserts • RDMT-TX
              (9 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
              2207645 RDMT1605M0TX RDMT1605M0TX   TN7535 1 16.0000 .6299 5.5600 .2189 0.1800 .0071
                List price:
                $17.01 /each.
                Your price::
                2020767 RDMT1605M0TX RDMT1605M0TX   TN7525 1 16.0000 .6299 5.5600 .2189 0.1800 .0071
                  List price:
                  $17.01 /each.
                  Your price::
                  2012548 RDMT1605M0TX RDMT1605M0TX   TN450 1 16.0000 .6299 5.5600 .2189 0.1800 .0071
                    This item is not available
                    Replacement Product 2207645
                    Your price::
                    2957536 RDMT1605M0TX RDMT1605M0TX   TN6525 1 16.0000 .6299 5.5600 .2189 0.1800 .0071
                      Your price::
                      2109572 RDMT1605M0TX RDMT1605M0TX   TN2510 1 16.0000 .6299 5.5600 .2189 0.1800 .0071
                        Your price::