COVID-19: How WIDIA is responding

M6800M

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (33)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (33)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (33)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (33)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (33)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (33)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (33)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (33)
  • M Stainless Steel (33)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (33)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (33)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (33)
  • K Cast Iron (39)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (39)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (39)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (39)
  • N Non-Ferrous Materials (26)
    • N1
      Wrought Aluminum
      (26)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (26)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (26)
  • S High-Temp Alloys (42)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (42)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (42)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (42)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (42)
  • H Hardened Materials (29)
    • H1
      Hardened Materials 44-48 HRC
      (29)
Applications
  • Face Milling Face Milling (23)
  • ID Thread Turning ID Thread Turning (19)
  • Pocket Pocket (23)
  • Pocket Helical Pocket Helical (23)
  • Pocket Milling Pocket Milling (23)
  • Ramping Ramping (23)
  • Shoulder Milling Shoulder Milling (23)
  • Shoulder Square End Shoulder Square End (23)
  • Slot Milling Slot Milling (23)
  • Slot Square End Slot Square End (23)
Cutting Diameter
  • 16.0 (2)
  • 18.0 (1)
  • 20.0 (5)
  • 22.0 (2)
  • 25.0 (5)
  • 28.0 (2)
  • 32.0 (5)
  • 40.0 (2)
  • 50.0 (1)
to
Cutting Diameter
  • 0.63 (2)
  • 0.709 (1)
  • 0.787 (5)
  • 0.866 (2)
  • 0.984 (5)
  • 1.102 (2)
  • 1.26 (5)
  • 1.575 (2)
  • 1.969 (1)
to
Cutting Length
  • 0.394 (25)
to
Cutting Length
  • 10.0 (25)
to
Reach
  • 23.5 (2)
  • 26.5 (2)
  • 29.5 (2)
  • 30.0 (1)
  • 30.5 (2)
  • 30.6 (1)
  • 32.5 (3)
  • 33.1 (1)
  • 40.5 (1)
  • 41.2 (1)
  • 50.5 (2)
  • 60.5 (4)
  • 65.5 (3)
to
Reach
  • 0.925 (2)
  • 1.043 (2)
  • 1.161 (2)
  • 1.181 (1)
  • 1.201 (2)
  • 1.205 (1)
  • 1.28 (3)
  • 1.303 (1)
  • 1.594 (1)
  • 1.622 (1)
  • 1.988 (2)
  • 2.382 (4)
  • 2.579 (3)
to
Tool Cutting Edge Angle
  • 90.0 (25)
to
Connection Style
  • Straight-Cylindrical (25)
Cutting Edges Per Insert
  • 2.0 (42)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.2 (24)
  • 0.4 (28)
  • 0.8 (28)
  • 1.2 (25)
  • 1.69 (25)
  • 2.11 (25)
  • 3.24 (25)
to
Corner Radius
  • 0.008 (24)
  • 0.0156 (28)
  • 0.0313 (28)
  • 0.0469 (25)
  • 0.0665 (25)
  • 0.0831 (25)
  • 0.1276 (25)
to
Application
Grade Of Cutting Tool
  • THR-S (26)
  • TN6405 (29)
  • TN6425 (25)
  • TN6430 (31)
Hand Of Tool
  • R (25)
Wiper Insert
  • N (19)
Maximum Ramp Angle
  • 0.7 (2)
  • 1.5 (7)
  • 2.5 (7)
  • 3.0 (3)
  • 5.0 (5)
to
Front-End
Insert Shape
  • X-PARALLELOGRAM 80 (42)
Center Cutting
Insert Geometry
Shape
  • X-PARALLELOGRAM 80 (19)
Cutting Edge Length
  • 0.433 (19)
to
Cutting Edge Length
  • 11.0 (19)
to
Cutting Tool Material
  • H W (19)
Chip Breaker CBMD
  • AL (3)
  • ML (12)
  • MS (4)
Tolerance Class
  • G (3)
  • M (16)
Back-End
Connection Type
  • CYLINDRICAL (25)
Back-End Diameter
  • 0.4724 (1)
  • 0.6299 (3)
  • 0.7087 (1)
  • 0.7874 (6)
  • 0.9055 (1)
  • 0.9843 (6)
  • 1.1811 (1)
  • 1.2598 (6)
to
Back-End Diameter
  • 12.0 (1)
  • 16.0 (3)
  • 18.0 (1)
  • 20.0 (6)
  • 23.0 (1)
  • 25.0 (6)
  • 30.0 (1)
  • 32.0 (6)
to
other
Grade
  • THR-S (3)
  • TN6405 (6)
  • TN6425 (2)
  • TN6430 (8)
Platform
  • M6800 Series (19)
Tool Unit
  • I (19)
  • M (44)
Over All Length [L]
  • 100.0 (3)
  • 110.0 (3)
  • 120.0 (3)
  • 130.0 (2)
  • 140.0 (1)
  • 150.0 (2)
  • 160.0 (1)
  • 170.0 (3)
  • 200.0 (1)
  • 210.0 (3)
  • 240.0 (1)
  • 250.0 (2)
to
Over All Length [L]
  • 3.937 (3)
  • 4.331 (3)
  • 4.724 (3)
  • 5.118 (2)
  • 5.512 (1)
  • 5.906 (2)
  • 6.299 (1)
  • 6.693 (3)
  • 7.874 (1)
  • 8.268 (3)
  • 9.449 (1)
  • 9.843 (2)
to
Head Length [L2]
  • 23.5 (2)
  • 26.5 (2)
  • 29.5 (2)
  • 30.0 (1)
  • 30.5 (2)
  • 30.6 (1)
  • 32.5 (3)
  • 33.1 (1)
  • 40.5 (1)
  • 41.2 (1)
  • 50.5 (2)
  • 60.5 (4)
  • 65.5 (3)
to
Head Length [L2]
  • 0.925 (2)
  • 1.043 (2)
  • 1.161 (2)
  • 1.181 (1)
  • 1.201 (2)
  • 1.205 (1)
  • 1.28 (3)
  • 1.303 (1)
  • 1.594 (1)
  • 1.622 (1)
  • 1.988 (2)
  • 2.382 (4)
  • 2.579 (3)
to
Insert Hand
  • R (19)
obsoleteFacet
  • true (44)
  • false (15)
Number of Inserts
  • 2.0 (15)
  • 3.0 (6)
  • 4.0 (2)
  • 5.0 (2)
to
No filters matching ""
View Products in
Metric
Inch
90° Shoulder Mills • M6800 Series

M6800M Tool Bodies
(25 Products)
  • Shank - Cylindrical  PlainShank - Cylindrical Plain
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
  • Ramping: BlankRamping: Blank
  • PocketingPocketing
  • Helical MillingHelical Milling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
3577852 12396461600 12396461600 16.0000 .6300 12.0 .4724 100.0000 3.937 23.5000 .9250 10.0000 .3940 2 3.000 43750 N 0.19
    3577853 12396461800 12396461800 16.0000 .6300 16.0 .6299 100.0000 3.937 30.5000 1.201 10.0000 .3940 2 3.000 43750 Y 0.25
      3577854 12396462000 12396462000 18.0000 .7090 16.0 .6299 100.0000 3.937 23.5000 .9250 10.0000 .3940 2 3.000 43000 Y 0.27
        3577856 12396462400 12396462400 20.0000 .7870 16.0 .6299 110.0000 4.331 26.5000 1.043 10.0000 .3940 3 5.000 41000 Y 0.28
          3577857 12396462600 12396462600 20.0000 .7870 18.0 .7087 170.0000 6.693 30.6000 1.205 10.0000 .3940 2 5.000 41000 Y 0.38
            3577858 12396462800 12396462800 20.0000 .7870 20.0 .7874 110.0000 4.331 30.5000 1.201 10.0000 .3940 3 5.000 41000 Y 0.36
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              90° Shoulder Mills • M6800 Series

              M6800M Inserts
              (3 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
              3859299 BDGT11T302FRAL BDGT11T302FRAL THR-S 2 11.0000 .4330 6.6400 .2614 3.8800 .1528 2.0000 .0787 0.2000 .0080 0.0800 .0031
                3859300 BDGT11T304FRAL BDGT11T304FRAL THR-S 2 11.0000 .4330 6.6700 .2626 3.8800 .1528 1.8000 .0709 0.4000 .0156 0.0800 .0031
                  3859301 BDGT11T308FRAL BDGT11T308FRAL THR-S 2 11.0000 .4330 6.6800 .2630 3.8800 .1528 1.4000 .0551 0.8000 .0312 0.0800 .0031
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty
                    90° Shoulder Mills • M6800 Series

                    M6800M Inserts
                    (12 Products)
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                    3577932 BDMT11T304ERML BDMT11T304ERML TN6405 2 11.0000 .4330 6.6600 .2622 3.8100 .1500 1.7900 .0705 0.4000 .0156 0.1000 .0039
                      3577933 BDMT11T304ERML BDMT11T304ERML TN6430 2 11.0000 .4330 6.6600 .2622 3.8100 .1500 1.7900 .0705 0.4000 .0156 0.1000 .0039
                        3577936 BDMT11T308ERML BDMT11T308ERML TN6405 2 11.0000 .4330 6.6700 .2626 3.8100 .1500 1.4000 .0551 0.8000 .0312 0.1000 .0039
                          3577937 BDMT11T308ERML BDMT11T308ERML TN6430 2 11.0000 .4330 6.6700 .2626 3.8100 .1500 1.4000 .0551 0.8000 .0312 0.1000 .0039
                            3577938 BDMT11T312ERML BDMT11T312ERML TN6405 2 11.0000 .4330 6.6900 .2634 3.8100 .1500 1.0100 .0398 1.2000 .0468 0.1000 .0039
                              3577939 BDMT11T312ERML BDMT11T312ERML TN6430 2 11.0000 .4330 6.6900 .2634 3.8100 .1500 1.0100 .0398 1.2000 .0468 0.1000 .0039
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor
                                Qty
                                90° Shoulder Mills • M6800 Series

                                M6800M Inserts
                                (4 Products)
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                3577930 BDMT11T304ERMS BDMT11T304ERMS TN6425 2 11.0000 .4330 6.6600 .2622 3.8100 .1500 1.7900 .0705 0.4000 .0156 0.0800 .0031
                                  3577931 BDMT11T304ERMS BDMT11T304ERMS TN6430 2 11.0000 .4330 6.6600 .2622 3.8100 .1500 1.7900 .0705 0.4000 .0156 0.0800 .0031
                                    3577934 BDMT11T308ERMS BDMT11T308ERMS TN6425 2 11.0000 .4330 6.6700 .2626 3.8100 .1500 1.4000 .0551 0.8000 .0312 0.0800 .0031
                                      3577935 BDMT11T308ERMS BDMT11T308ERMS TN6430 2 11.0000 .4330 6.6700 .2626 3.8100 .1500 1.4000 .0551 0.8000 .0312 0.0800 .0031
                                        List price:
                                        Discount: %
                                        Your price::
                                        Replacement This item is not available
                                        Replacement Product This item may be available through a distributor
                                        Qty
                                        If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                        You are about to create a duplicate . Do you want to proceed?
                                        You are about to delete Do you want to proceed?
                                        What would you like to rename your to?
                                        Please enter a valid name
                                        Please enter a name for the duplicate
                                        Please enter a valid name
                                        You are about to add to your My Solutions page. Do you want to proceed?
                                        Please enter a valid name
                                        Send a copy of

                                        Please enter a valid Email
                                        Please enter a valid name

                                        We have found the following CAD Drawings

                                        Select the files you are looking for and download them all at once

                                        You should be logged to see your dashboard information
                                        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                        item(s) successfully added to the cart
                                        View Cart