COVID-19: How WIDIA is responding

M6800LX

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (31)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (31)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (31)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (31)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (31)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (31)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (31)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (31)
  • M Stainless Steel (31)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (31)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (31)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (31)
  • K Cast Iron (37)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (37)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (37)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (37)
  • N Non-Ferrous Materials (25)
    • N1
      Wrought Aluminum
      (25)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (25)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (25)
  • S High-Temp Alloys (41)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (41)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (41)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (41)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (41)
  • H Hardened Materials (27)
    • H1
      Hardened Materials 44-48 HRC
      (27)
Applications
  • Face Milling Face Milling (21)
  • ID Thread Turning ID Thread Turning (20)
  • Pocket Pocket (17)
  • Pocket Helical Pocket Helical (17)
  • Pocket Milling Pocket Milling (17)
  • Ramping Ramping (17)
  • Shoulder Milling Shoulder Milling (21)
  • Shoulder Square End Shoulder Square End (21)
  • Slot Milling Slot Milling (21)
  • Slot Square End Slot Square End (21)
Cutting Diameter
  • 25.0 (4)
  • 25.4 (3)
  • 31.75 (2)
  • 32.0 (4)
  • 38.1 (2)
  • 40.0 (2)
  • 50.0 (1)
  • 50.8 (1)
  • 63.5 (1)
  • 76.4 (1)
  • 101.6 (1)
to
Cutting Diameter
  • 0.984 (4)
  • 1.0 (3)
  • 1.25 (2)
  • 1.26 (4)
  • 1.5 (2)
  • 1.575 (2)
  • 1.969 (1)
  • 2.0 (1)
  • 2.5 (1)
  • 3.0 (1)
  • 4.0 (1)
to
Cutting Length
  • 0.618 (13)
  • 0.6181 (9)
to
Cutting Length
  • 15.7 (22)
to
Reach
  • 36.5 (4)
  • 40.5 (4)
  • 50.5 (3)
  • 60.5 (3)
  • 65.0 (1)
  • 65.5 (3)
to
Reach
  • 1.437 (4)
  • 1.594 (2)
  • 1.5945 (2)
  • 1.988 (2)
  • 1.9882 (1)
  • 2.3819 (1)
  • 2.382 (2)
  • 2.559 (1)
  • 2.5787 (1)
  • 2.579 (2)
to
Tool Cutting Edge Angle
  • 90.0 (22)
to
Connection Style
  • A-Socket Head Cap Screw (4)
  • Straight-Cylindrical (11)
  • Weldon (7)
Cutting Edges Per Insert
  • 2.0 (41)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.4 (26)
  • 0.8 (26)
  • 1.2 (23)
  • 1.65 (23)
  • 2.06 (23)
  • 2.1 (22)
  • 3.21 (24)
to
Corner Radius
  • 0.0156 (26)
  • 0.0313 (26)
  • 0.0469 (23)
  • 0.065 (23)
  • 0.0811 (23)
  • 0.0826 (22)
  • 0.1264 (24)
to
Application
Grade Of Cutting Tool
  • THR-S (25)
  • TN6405 (27)
  • TN6425 (23)
  • TN6430 (29)
Hand Of Tool
  • R (22)
Wiper Insert
  • N (20)
Maximum Ramp Angle
  • 2.5 (4)
  • 5.0 (6)
  • 8.0 (7)
to
Front-End
Insert Shape
  • X-PARALLELOGRAM 80 (41)
Center Cutting
Insert Geometry
Shape
  • X-PARALLELOGRAM 80 (20)
Cutting Edge Length
  • 0.669 (20)
to
Cutting Edge Length
  • 17.0 (20)
to
Cutting Tool Material
  • H W (20)
Chip Breaker CBMD
  • AL (4)
  • ML (12)
  • MS (4)
Tolerance Class
  • G (4)
  • M (16)
Back-End
Connection Type
  • CYLINDRICAL (18)
  • SHELL MILL (4)
Back-End Diameter
  • 0.75 (3)
  • 0.7874 (1)
  • 0.9843 (4)
  • 1.0 (4)
  • 1.25 (3)
  • 1.2598 (6)
  • 1.5 (1)
to
Back-End Diameter
  • 19.05 (3)
  • 20.0 (1)
  • 25.0 (4)
  • 25.4 (4)
  • 31.75 (3)
  • 32.0 (6)
  • 38.1 (1)
to
other
Grade
  • THR-S (4)
  • TN6405 (6)
  • TN6425 (2)
  • TN6430 (8)
Platform
  • M6800 Series (27)
Tool Unit
  • I (31)
  • M (31)
Over All Length [L]
  • 40.0 (2)
  • 50.0 (1)
  • 63.0 (1)
  • 88.9 (1)
  • 95.25 (1)
  • 101.6 (2)
  • 110.5 (1)
  • 120.0 (2)
  • 130.0 (2)
  • 150.0 (2)
  • 160.0 (2)
  • 200.0 (1)
  • 210.0 (1)
  • 240.0 (2)
  • 250.0 (1)
to
Over All Length [L]
  • 1.575 (2)
  • 1.969 (1)
  • 2.48 (1)
  • 3.5 (1)
  • 3.75 (1)
  • 4.0 (2)
  • 4.3504 (1)
  • 4.724 (2)
  • 5.118 (2)
  • 5.906 (2)
  • 6.299 (1)
  • 6.2992 (1)
  • 7.874 (1)
  • 8.268 (1)
  • 9.4488 (1)
  • 9.449 (1)
  • 9.843 (1)
to
Head Length [L2]
  • 36.5 (4)
  • 40.5 (4)
  • 50.5 (3)
  • 60.5 (3)
  • 65.0 (1)
  • 65.5 (3)
to
Head Length [L2]
  • 1.437 (4)
  • 1.594 (2)
  • 1.5945 (2)
  • 1.988 (2)
  • 1.9882 (1)
  • 2.3819 (1)
  • 2.382 (2)
  • 2.559 (1)
  • 2.5787 (1)
  • 2.579 (2)
to
Insert Hand
  • R (20)
obsoleteFacet
  • true (42)
  • false (16)
Number of Inserts
  • 2.0 (11)
  • 3.0 (4)
  • 4.0 (4)
  • 5.0 (1)
  • 6.0 (1)
  • 7.0 (1)
to
No filters matching ""
View Products in
Metric
Inch
90° Shoulder Mills • M6800 Series

M6800LX Tool Bodies
(11 Products)
  • Shank - Cylindrical  PlainShank - Cylindrical Plain
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
  • Ramping: BlankRamping: Blank
  • PocketingPocketing
  • Helical MillingHelical Milling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
3577887 12396480000 12396480000 25.0000 .9840 20.0 .7874 120.0000 4.724 36.5000 1.437 15.7000 .6180 2 8.000 35000 Y 0.42
    3577888 12396480200 12396480200 25.0000 .9840 25.0 .9843 120.0000 4.724 36.5000 1.437 15.7000 .6180 2 8.000 35000 Y 0.56
      3577889 12396480400 12396480400 25.0000 .9840 25.0 .9843 160.0000 6.299 60.5000 2.382 15.7000 .6180 2 8.000 35000 Y 0.68
        3577890 12396480600 12396480600 25.0000 .9840 25.0 .9843 210.0000 8.268 60.5000 2.382 15.7000 .6180 2 8.000 35000 Y 0.82
          3577892 12396481000 12396481000 32.0000 1.260 25.0 .9843 130.0000 5.118 40.5000 1.594 15.7000 .6180 3 5.000 30000 Y 0.62
            3577893 12396481200 12396481200 32.0000 1.260 32.0 1.259 130.0000 5.118 40.5000 1.594 15.7000 .6180 3 5.000 30000 Y 0.86
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              90° Shoulder Mills • M6800 Series

              M6800LX Tool Bodies
              (4 Products)
              • Milling - Side and FaceMilling - Side and Face
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Slotting: Square EndSlotting: Square End
              • Face MillingFace Milling
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
              3786392 15396470400 15396470400 50.8000 2.000 19.05 .75 40.6400 1.600 40.0000 1.575 15.7000 .6181 4 16800 Y 0.98
                3786393 15396471000 15396471000 63.5000 2.500 19.05 .75 40.6400 1.600 40.0000 1.575 15.7000 .6181 5 14400 Y 1.63
                  3786394 15396471600 15396471600 76.4000 3.000 25.4 1.0 48.6920 1.917 50.0000 1.969 15.7000 .6181 6 12250 Y 2.34
                    3786395 15396477200 15396477200 101.6000 4.000 38.1 1.5 66.5480 2.620 63.0000 2.480 15.7000 .6181 7 10400 Y 4.64
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      90° Shoulder Mills • M6800 Series

                      M6800LX Tool Bodies
                      (5 Products)
                      • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                      • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                      • Slotting: Square EndSlotting: Square End
                      • Face MillingFace Milling
                      • Ramping: BlankRamping: Blank
                      • PocketingPocketing
                      • Helical MillingHelical Milling
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                      3577771 15396480000 15396480000 25.4000 1.000 19.05 .75 88.9000 3.500 36.5000 1.437 15.7000 .6181 2 8.000 35000 Y 0.93
                        3577772 15396480200 15396480200 25.4000 1.000 25.4 1.0 95.2500 3.750 36.5000 1.437 15.7000 .6181 2 8.000 35000 Y 1.00
                          3577774 15396481000 15396481000 31.7500 1.250 25.4 1.0 101.6000 4.000 40.5000 1.594 15.7000 .6181 3 5.000 30000 Y 1.36
                            3577775 15396481200 15396481200 31.7500 1.250 31.75 1.25 101.6000 4.000 40.5000 1.594 15.7000 .6181 3 5.000 30000 Y 1.48
                              3577776 15396481800 15396481800 38.1000 1.500 31.75 1.25 110.5000 4.350 50.5000 1.988 15.7000 .6181 4 2.500 25000 Y 1.82
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor
                                Qty
                                90° Shoulder Mills • M6800 Series

                                M6800LX Tool Bodies
                                (2 Products)
                                • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                • Slotting: Square EndSlotting: Square End
                                • Face MillingFace Milling
                                • Ramping: BlankRamping: Blank
                                • PocketingPocketing
                                • Helical MillingHelical Milling
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                3577773 15396480400 15396480400 25.4000 1.000 25.4 1.0 160.0000 6.299 60.5000 2.381 15.7000 .6180 2 8.000 35000 Y 1.00
                                  3577777 15396482000 15396482000 38.1000 1.500 31.75 1.25 240.0000 9.448 65.5000 2.578 15.7000 .6180 2 2.500 25000 Y 3.70
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty
                                    90° Shoulder Mills • M6800 Series

                                    M6800LX Inserts
                                    (4 Products)
                                    View Products
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                    3859302 BDGT170404FRAL BDGT170404FRAL THR-S 2 17.0000 .6690 9.6030 .3780 5.1000 .2007 2.3000 .0906 0.4000 .0156 0.0800 .0031
                                      3859373 BDGT170408FRAL BDGT170408FRAL THR-S 2 17.0000 .6690 9.6300 .3791 5.1000 .2007 1.9000 .0748 0.8000 .0312 0.0800 .0031
                                        3859374 BDGT170420FRAL BDGT170420FRAL THR-S 2 17.0000 .6690 9.6600 .3803 5.1000 .2007 0.6000 .0236 2.1000 .0826 0.0800 .0031
                                          3859375 BDGT170431FRAL BDGT170431FRAL THR-S 2 17.0000 .6690 9.6900 .3815 5.1000 .2007     3.2100 .1264 0.0800 .0031
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty
                                            90° Shoulder Mills • M6800 Series

                                            M6800LX Inserts
                                            (12 Products)
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                            3577948 BDMT170404ERML BDMT170404ERML TN6405 2 17.0000 .6690 9.5900 .3776 4.9020 .1930 2.2800 .0898 0.4000 .0156 0.1000 .0039
                                              3577949 BDMT170404ERML BDMT170404ERML TN6430 2 17.0000 .6690 9.5900 .3776 4.9020 .1930 2.2800 .0898 0.4000 .0156 0.1000 .0039
                                                3577952 BDMT170408ERML BDMT170408ERML TN6405 2 17.0000 .6690 9.6000 .3780 4.9020 .1930 1.8800 .0740 0.8000 .0312 0.1000 .0039
                                                  3577953 BDMT170408ERML BDMT170408ERML TN6430 2 17.0000 .6690 9.6000 .3780 4.9020 .1930 1.8800 .0740 0.8000 .0312 0.1000 .0039
                                                    3577954 BDMT170412ERML BDMT170412ERML TN6405 2 17.0000 .6690 9.6100 .3783 4.9020 .1930 1.4900 .0587 1.2000 .0468 0.1000 .0039
                                                      3577955 BDMT170412ERML BDMT170412ERML TN6430 2 17.0000 .6690 9.6100 .3783 4.9020 .1930 1.4900 .0587 1.2000 .0468 0.1000 .0039
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        Qty
                                                        90° Shoulder Mills • M6800 Series

                                                        M6800LX Inserts
                                                        (4 Products)
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                        3577946 BDMT170404ERMS BDMT170404ERMS TN6425 2 17.0000 .6690 9.5900 .3776 4.9020 .1930 2.2800 .0898 0.4000 .0156 0.0800 .0031
                                                          3577947 BDMT170404ERMS BDMT170404ERMS TN6430 2 17.0000 .6690 9.5900 .3776 4.9020 .1930 2.2800 .0898 0.4000 .0156 0.0800 .0031
                                                            3577950 BDMT170408ERMS BDMT170408ERMS TN6425 2 17.0000 .6690 9.6000 .3780 4.9020 .1930 1.8800 .0740 0.8000 .0312 0.0800 .0031
                                                              3577951 BDMT170408ERMS BDMT170408ERMS TN6430 2 17.0000 .6690 9.6000 .3780 4.9020 .1930 1.8800 .0740 0.8000 .0312 0.0800 .0031
                                                                List price:
                                                                Discount: %
                                                                Your price::
                                                                Replacement This item is not available
                                                                Replacement Product This item may be available through a distributor
                                                                Qty
                                                                If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                You are about to create a duplicate . Do you want to proceed?
                                                                You are about to delete Do you want to proceed?
                                                                What would you like to rename your to?
                                                                Please enter a valid name
                                                                Please enter a name for the duplicate
                                                                Please enter a valid name
                                                                You are about to add to your My Solutions page. Do you want to proceed?
                                                                Please enter a valid name
                                                                Send a copy of

                                                                Please enter a valid Email
                                                                Please enter a valid name

                                                                We have found the following CAD Drawings

                                                                Select the files you are looking for and download them all at once

                                                                You should be logged to see your dashboard information
                                                                The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                item(s) successfully added to the cart
                                                                View Cart