successfully added to cart
View Cart

Notifications

Mark all as read

M680 Series

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Select First Choice
  • CN (30)
  • DE (55)
  • GB (7)
  • IN (28)
Applications
  • Face Milling Face Milling (61)
  • Pocket Pocket (8)
  • Pocket Milling Pocket Milling (8)
  • Pocket Plunge Milling Pocket Plunge Milling (8)
  • Ramping Ramping (8)
  • Shoulder Milling Shoulder Milling (61)
  • Shoulder Roughing Shoulder Roughing (8)
  • Shoulder Square End Shoulder Square End (51)
  • Slot Milling Slot Milling (61)
  • Slot Side Slot Side (8)
  • Slot Square End Slot Square End (59)
Workpiece Material
  • P Steel (179)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (179)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (179)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (179)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (173)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (173)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (169)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (169)
  • M Stainless Steel (157)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (157)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (157)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (157)
  • K Cast Iron (193)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (193)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (190)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (190)
  • N Non-Ferrous Materials (90)
    • N1
      Wrought Aluminum
      (90)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (90)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (90)
  • S High-Temp Alloys (102)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (87)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (87)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (87)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (102)
  • H Hardened Materials (65)
    • H1
      Hardened Materials 44-48 HRC
      (65)
    • H2
      Hardened Materials 48-55 HRC
      (56)
    • H3
      Hardened Materials 56-60 HRC
      (56)
Cutting Diameter
  • 16.0 (2)
  • 19.05 (2)
  • 20.0 (3)
  • 25.0 (6)
  • 25.4 (8)
  • 31.75 (4)
  • 32.0 (6)
  • 35.0 (1)
  • 38.1 (9)
  • 40.0 (5)
  • 50.0 (3)
  • 50.8 (4)
  • 63.0 (2)
  • 63.5 (2)
  • 76.2 (1)
  • 80.0 (1)
  • 100.0 (1)
  • 101.6 (4)
  • 125.0 (1)
  • 127.0 (2)
  • 152.4 (2)
  • 160.0 (1)
  • 203.2 (1)
to
Cutting Diameter
  • 0.6299 (1)
  • 0.63 (1)
  • 0.75 (2)
  • 0.787 (1)
  • 0.7874 (2)
  • 0.984 (3)
  • 0.9843 (3)
  • 1.0 (8)
  • 1.25 (4)
  • 1.2598 (3)
  • 1.26 (3)
  • 1.378 (1)
  • 1.5 (9)
  • 1.5748 (3)
  • 1.575 (2)
  • 1.9685 (1)
  • 1.969 (2)
  • 2.0 (4)
  • 2.48 (1)
  • 2.4803 (1)
  • 2.5 (2)
  • 3.0 (1)
  • 3.15 (1)
  • 3.937 (1)
  • 4.0 (4)
  • 4.921 (1)
  • 5.0 (2)
  • 6.0 (2)
  • 6.2992 (1)
  • 8.0 (1)
to
Cutting Length
  • 0.35 (3)
  • 0.354 (4)
  • 0.3543 (4)
  • 0.374 (9)
  • 0.55 (37)
  • 0.551 (6)
  • 0.5512 (6)
  • 0.6022 (1)
  • 0.6046 (1)
to
Cutting Length
  • 8.89 (3)
  • 9.0 (8)
  • 9.5 (9)
  • 13.97 (37)
  • 14.0 (12)
  • 15.297 (1)
  • 15.36 (1)
to
Reach
  • 27.0 (1)
  • 27.1978 (1)
  • 30.0 (2)
  • 31.75 (1)
  • 32.0 (2)
  • 32.674 (1)
  • 37.313 (1)
  • 37.338 (1)
  • 39.0 (2)
  • 39.8 (1)
  • 40.0 (9)
  • 42.418 (1)
  • 43.663 (2)
  • 43.688 (3)
  • 50.0 (2)
  • 53.823 (1)
  • 53.848 (2)
  • 57.15 (1)
  • 69.063 (1)
  • 69.088 (1)
  • 76.2 (2)
  • 94.488 (1)
  • 101.6 (1)
  • 104.648 (1)
  • 152.4 (2)
  • 155.448 (1)
to
Reach
  • 1.063 (1)
  • 1.0708 (1)
  • 1.181 (1)
  • 1.1811 (1)
  • 1.25 (1)
  • 1.2598 (1)
  • 1.26 (1)
  • 1.2864 (1)
  • 1.469 (1)
  • 1.47 (1)
  • 1.5354 (2)
  • 1.5669 (1)
  • 1.5748 (6)
  • 1.575 (3)
  • 1.67 (1)
  • 1.719 (2)
  • 1.72 (3)
  • 1.9685 (1)
  • 1.969 (1)
  • 2.119 (1)
  • 2.12 (2)
  • 2.25 (1)
  • 2.719 (1)
  • 2.72 (1)
  • 3.0 (2)
  • 3.72 (1)
  • 4.0 (1)
  • 4.12 (1)
  • 6.0 (2)
  • 6.12 (1)
to
Tool Cutting Edge Angle
  • 90.0 (67)
  • 90.25 (1)
  • 90.28 (1)
  • 90.4 (2)
to
Connection Style
  • A-Socket Head Cap Screw (22)
  • B-Cutter Retention Screw (3)
  • C-Bolt Circle (1)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (6)
  • Straight-Cylindrical (9)
  • Weldon (33)
Cutting Edges Per Insert
  • 2.0 (248)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.4 (54)
  • 0.8 (133)
  • 1.2 (111)
  • 1.6 (62)
  • 1.67 (48)
  • 2.0 (59)
  • 2.5 (49)
  • 3.17 (50)
  • 3.175 (43)
  • 4.0 (49)
to
Corner Radius
  • 0.0154 (9)
  • 0.0157 (44)
  • 0.016 (43)
  • 0.0313 (133)
  • 0.0469 (102)
  • 0.0475 (9)
  • 0.0625 (53)
  • 0.0635 (9)
  • 0.0657 (48)
  • 0.0781 (50)
  • 0.0795 (9)
  • 0.0984 (49)
  • 0.125 (51)
  • 0.1563 (48)
  • 0.1574 (43)
to
Application
Rough Finish
  • FR (7)
Grade Of Cutting Tool
  • THM (71)
  • THM-U (45)
  • THR (52)
  • TN2510 (56)
  • TN25M (54)
  • TN450 (71)
  • TN5515 (76)
  • TN6501 (55)
  • TN6502 (54)
  • TN6510 (56)
  • TN6520 (57)
  • TN6525 (61)
  • TN6540 (61)
  • TN7525 (75)
  • TN7535 (76)
  • TTI25 (66)
  • TTM (11)
  • TTM08 (54)
  • TTR (43)
  • WK15CM (75)
  • WK15PM (9)
  • WP35CM (74)
  • WP40PM (49)
  • WS30PM (44)
  • WU20PM (57)
Hand Of Tool
  • R (75)
Wiper Insert
  • N (189)
Front-End
Insert Shape
  • A-PARALLELOGRAM 85 (39)
  • X-PARALLELOGRAM 80 (197)
  • X-RECTANGLE MILL 4 90 (43)
  • X-RH0MBIC 70 (19)
Center Cutting
Insert Geometry
Shape
  • A-PARALLELOGRAM 85 (30)
  • X-PARALLELOGRAM 80 (147)
  • X-RECTANGLE MILL 4 90 (1)
  • X-RH0MBIC 70 (11)
Insert IC Size
  • 0.375 (7)
to
Insert IC Size
  • 9.525 (7)
to
Cutting Edge Length
  • 0.0617 (9)
  • 0.3494 (1)
  • 0.3526 (1)
  • 0.3545 (1)
  • 0.3613 (1)
  • 0.3724 (1)
  • 0.3728 (12)
  • 0.389 (2)
  • 0.4083 (12)
  • 0.411 (18)
  • 0.6168 (6)
  • 0.6169 (101)
  • 0.617 (1)
  • 0.6209 (7)
  • 0.625 (11)
to
Cutting Edge Length
  • 8.875 (1)
  • 8.956 (1)
  • 9.003 (1)
  • 9.176 (1)
  • 9.46 (1)
  • 9.47 (12)
  • 9.88 (2)
  • 10.37 (12)
  • 10.44 (18)
  • 15.67 (116)
  • 15.672 (1)
  • 15.772 (7)
  • 15.875 (11)
to
Chip Breaker CBMD
  • AL (10)
  • ALP (6)
  • GE (27)
  • MH (9)
  • ML (12)
  • MM (11)
  • MR (10)
Cutting Tool Material
  • H T (7)
  • H W (182)
Tolerance Class
  • H (146)
  • M (2)
  • N (41)
Back-End
Connection Type
  • CYLINDRICAL (42)
  • SCREW-ON (6)
  • SHELL MILL (27)
Back-End Diameter
  • 0.6299 (2)
  • 0.75 (7)
  • 0.7874 (3)
  • 0.8661 (7)
  • 0.9594 (1)
  • 0.9843 (5)
  • 1.0 (7)
  • 1.063 (1)
  • 1.1024 (3)
  • 1.25 (15)
  • 1.2598 (8)
  • 1.5 (4)
  • 1.5748 (2)
  • 2.0 (5)
  • 2.5 (1)
to
Back-End Diameter
  • 16.0 (2)
  • 19.05 (7)
  • 20.0 (3)
  • 22.0 (7)
  • 24.37 (1)
  • 25.0 (5)
  • 25.4 (7)
  • 27.0 (1)
  • 28.0 (3)
  • 31.75 (15)
  • 32.0 (8)
  • 38.1 (4)
  • 40.0 (2)
  • 50.8 (5)
  • 63.5 (1)
to
other
Grade
  • THM (12)
  • THM-U (3)
  • THR (2)
  • TN2510 (6)
  • TN25M (4)
  • TN450 (12)
  • TN5515 (17)
  • TN6501 (4)
  • TN6502 (3)
  • TN6510 (5)
  • TN6520 (6)
  • TN6525 (10)
  • TN6540 (10)
  • TN7525 (16)
  • TN7535 (17)
  • TTI25 (7)
  • TTM (2)
  • TTM08 (4)
  • TTR (1)
  • W (47)
  • WK15CM (16)
  • WK15PM (1)
  • WP35CM (15)
  • WP40PM (7)
  • WS30PM (2)
  • WU20PM (7)
Platform
  • M300 Series (1)
  • M680 (13)
  • M680 Series (163)
Tool Unit
  • I (232)
  • M (221)
Display Configurable Products
  • false (264)
Over All Length [L]
  • 38.1 (3)
  • 40.0 (6)
  • 44.45 (2)
  • 45.0 (1)
  • 50.0 (2)
  • 50.8 (8)
  • 52.0 (2)
  • 63.0 (6)
  • 63.5 (3)
  • 75.0 (1)
  • 82.0 (2)
  • 88.9 (2)
  • 93.98 (1)
  • 96.0 (3)
  • 100.0 (3)
  • 101.6 (5)
  • 110.0 (2)
  • 111.76 (4)
  • 127.0 (1)
  • 134.112 (1)
  • 152.4 (1)
  • 162.56 (1)
  • 180.0 (1)
  • 184.15 (1)
  • 200.0 (1)
  • 203.2 (1)
  • 213.36 (1)
  • 220.0 (1)
  • 234.95 (2)
  • 250.0 (1)
  • 254.0 (2)
to
Over All Length [L]
  • 1.5 (3)
  • 1.5748 (3)
  • 1.575 (3)
  • 1.75 (2)
  • 1.772 (1)
  • 1.969 (2)
  • 2.0 (8)
  • 2.047 (1)
  • 2.0472 (1)
  • 2.48 (3)
  • 2.4803 (3)
  • 2.5 (3)
  • 2.953 (1)
  • 3.228 (1)
  • 3.2283 (1)
  • 3.5 (2)
  • 3.7 (1)
  • 3.7795 (2)
  • 3.78 (1)
  • 3.937 (3)
  • 4.0 (5)
  • 4.3307 (1)
  • 4.331 (1)
  • 4.4 (4)
  • 5.0 (1)
  • 5.28 (1)
  • 6.0 (1)
  • 6.4 (1)
  • 7.0866 (1)
  • 7.25 (1)
  • 7.874 (1)
  • 8.0 (1)
  • 8.4 (1)
  • 8.6614 (1)
  • 9.25 (2)
  • 9.8425 (1)
  • 10.0 (2)
to
Head Length [L2]
  • 25.973 (1)
  • 27.0 (1)
  • 30.0 (2)
  • 31.293 (1)
  • 31.75 (1)
  • 32.0 (2)
  • 37.147 (1)
  • 37.313 (1)
  • 37.338 (1)
  • 38.267 (1)
  • 39.0 (2)
  • 40.0 (8)
  • 42.418 (1)
  • 43.663 (2)
  • 43.688 (3)
  • 50.0 (2)
  • 53.823 (1)
  • 53.848 (2)
  • 57.15 (1)
  • 69.063 (1)
  • 69.088 (1)
  • 76.2 (2)
  • 94.488 (1)
  • 101.6 (1)
  • 104.648 (1)
  • 152.4 (2)
  • 155.448 (1)
to
Head Length [L2]
  • 1.0226 (1)
  • 1.063 (1)
  • 1.181 (1)
  • 1.1811 (1)
  • 1.232 (1)
  • 1.25 (1)
  • 1.2598 (1)
  • 1.26 (1)
  • 1.4625 (1)
  • 1.469 (1)
  • 1.47 (1)
  • 1.5066 (1)
  • 1.5354 (2)
  • 1.5748 (5)
  • 1.575 (3)
  • 1.67 (1)
  • 1.719 (2)
  • 1.72 (3)
  • 1.9685 (1)
  • 1.969 (1)
  • 2.119 (1)
  • 2.12 (2)
  • 2.25 (1)
  • 2.719 (1)
  • 2.72 (1)
  • 3.0 (2)
  • 3.72 (1)
  • 4.0 (1)
  • 4.12 (1)
  • 6.0 (2)
  • 6.12 (1)
to
Number of Inserts
  • 1.0 (1)
  • 2.0 (17)
  • 3.0 (21)
  • 4.0 (13)
  • 5.0 (9)
  • 6.0 (5)
  • 7.0 (2)
  • 8.0 (3)
  • 9.0 (1)
  • 10.0 (1)
  • 12.0 (2)
to
Insert Hand
  • L (5)
  • R (184)
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

0°/90° Shoulder Mills • M680

Inserts • XPHT-MR
(10 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [W] Insert Width [W] Insert Width [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
5427390 XPHT160412MR XPHT333MR   WK15CM 2 9.5250 .3750 15.7720 .6209 4.7600 .1875 1.7000 .0669 1.2000 .0468 0.1800 .0071
    List price:
    $18.36 /each.
    Your price::
    Qty
    2964142 XPHT160412MR XPHT333MR   TN6540 2 9.5250 .3750 15.7720 .6209 4.7600 .1875 1.7000 .0669 1.2000 .0468 0.1800 .0071
      List price:
      $18.36 /each.
      Your price::
      Qty
      2029057 XPHT160412MR XPHT333MR   TN5515 2 9.5250 .3750 15.6700 .6169 4.7600 .1875 1.7000 .0669 1.2000 .0468 0.1800 .0071
        This item is not available
        Replacement Product 5427390
        Your price::
        Qty
        2030379 XPHT160412MR XPHT333MR   TN450 2 9.5250 .3750 15.6700 .6169 4.7600 .1875 1.7000 .0669 1.2000 .0468 0.1800 .0071
          Your price::
          Qty
          2029059 XPHT160412MR XPHT160412MR   TTM08 2 9.5250 .3750 15.6700 .6169 4.7600 .1875 1.7000 .0669 1.2000 .0468    
            Your price::
            Qty
            2964134 XPHT160412MR XPHT333MR   TN6525 2 9.5250 .3750 15.7720 .6209 4.7600 .1875 1.7000 .0669 1.2000 .0468 0.1800 .0071
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              0°/90° Shoulder Mills • M680

              Inserts • XPHT-ERGE
              (25 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [W] Insert Width [W] Insert Width [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
              5427399 XPHT160408ERGE XPHT332ERGE   WK15CM 2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.8000 .0710 0.8000 .0312 0.1200 .0047
                List price:
                $18.36 /each.
                Your price::
                Qty
                2964170 XPHT160408ERGE XPHT332ERGE   TN6540 2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.8000 .0710 0.8000 .0312 0.1200 .0047
                  List price:
                  $18.36 /each.
                  Your price::
                  Qty
                  2964172 XPHT160408ERGE XPHT332ERGE   TN6510 2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.8000 .0710 0.8000 .0312 0.1200 .0047
                    List price:
                    $18.36 /each.
                    Your price::
                    Qty
                    2964179 XPHT160412ERGE XPHT333ERGE   TN6540 2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.5000 .0590 1.2000 .0469 0.1200 .0047
                      List price:
                      $17.36 /each.
                      Your price::
                      Qty
                      5519888 XPHT160408ERGE XPHT332ERGE   WS30PM 2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.8000 .0710 0.8000 .0312 0.1200 .0047
                        List price:
                        $19.26 /each.
                        Your price::
                        Qty
                        2405302 XPHT160408ERGE XPHT332ERGE   TN5515 2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.8000 .0710 0.8000 .0312 0.1200 .0047
                          This item is not available
                          Replacement Product 5427399
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          0°/90° Shoulder Mills • M680

                          Inserts • XPHT
                          (74 Products)
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [W] Insert Width [W] Insert Width [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                          5427394 XPHT160440 XPHT3310   WK15CM 2 9.5250 .3750 15.6700 .6169 4.7630 .1875 1.2000 .0472 4.0000 .1562 0.1600 .0063
                            List price:
                            $18.36 /each.
                            Your price::
                            Qty
                            5427396 XPHT160412 XPHT333   WK15CM 2 9.5250 .3750 15.6700 .6169 4.7630 .1875 1.5000 .0590 1.2000 .0468 0.1600 .0063
                              List price:
                              $18.36 /each.
                              Your price::
                              Qty