successfully added to cart
View Cart
COVID-19: How WIDIA is responding
S-Clamping Centerline
S-Clamping Centerline
S-Clamping Centerline
S-Clamping Centerline

SRDC 0° • 45° Application • Centerline

S-Clamping Centerline

Uses and application

  • Shank: KM4X™Shank: KM4X™
  • Multi Coolant TurningMulti Coolant Turning
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (1)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1)
  • M Stainless Steel (1)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1)
  • K Cast Iron (1)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum
      (1)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1)
    • N6
      Carbon, Graphite Composites, CFRP
      (1)
    • N7
      MMC's
      (1)
  • S High-Temp Alloys (1)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1)
  • H Hardened Materials (1)
    • H1
      Hardened Materials 44-48 HRC
      (1)
    • H2
      Hardened Materials 48-55 HRC
      (1)
    • H3
      Hardened Materials 56-60 HRC
      (1)
Applications
  • Back Boring Back Boring (1)
  • Cut-Off Cut-Off (1)
  • Deep Grooving Deep Grooving (1)
  • Face Grooving Face Grooving (1)
  • Facing Facing (1)
  • Grooving Grooving (1)
  • ID Facing ID Facing (1)
  • ID Grooving ID Grooving (1)
  • ID Thread Turning ID Thread Turning (1)
  • Multiple Direction Cutting Multiple Direction Cutting (1)
  • OD Thread Turning OD Thread Turning (1)
  • Plunge Turning Plunge Turning (1)
  • TRN Boring TRN Boring (1)
  • Threading Threading (1)
  • Turning Turning (1)
Cutting Condition
  • Heavily Interrupted Cut (1)
  • Lightly Interrupted Cut (1)
  • Smooth Cut (1)
  • Varying Depth of Cut (1)
Tool Cutting Edge Angle
  • 0.0 (1)
to
Cutting Edges Per Insert
  • 1.0 (1)
to
Corner configuration
Corner Radius
  • 6.0 (1)
to
Corner Radius
  • 0.2362 (1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (1)
  • AC5 (1)
  • CM3 (1)
  • CM5 (1)
  • CPX (1)
  • K313 (1)
  • K68 (1)
  • KC5010 (1)
  • KC5025 (1)
  • KC5410 (1)
  • KC730 (1)
  • KC732 (1)
  • KC8050 (1)
  • KC850 (1)
  • KC910 (1)
  • KC9110 (1)
  • KC9125 (1)
  • KC9240 (1)
  • KC9240NEW (1)
  • KC9315 (1)
  • KC9320 (1)
  • KCK15 (1)
  • KCK15B (1)
  • KCK20 (1)
  • KCK20B (1)
  • KCM25 (1)
  • KCM25B (1)
  • KCP10 (1)
  • KCP10B (1)
  • KCP25 (1)
  • KCP25B (1)
  • KCP30 (1)
  • KCP30B (1)
  • KCPK05 (1)
  • KCS10 (1)
  • KCS10B (1)
  • KCU10 (1)
  • KCU25 (1)
  • KY1615 (1)
  • MC2 (1)
  • THM (1)
  • TN5015 (1)
  • TN5020 (1)
  • TN5120 (1)
  • TN7010 (1)
  • TN7015 (1)
  • TN7025 (1)
  • TN7035 (1)
  • TN7105 (1)
  • TN7110 (1)
  • TN7115 (1)
  • TN7125 (1)
  • TN7135 (1)
  • TTI15 (1)
  • TTM09 (1)
  • WK20CT (1)
  • WP15CT (1)
  • WP25CT (1)
  • WP35CT (1)
  • WU10HT (1)
Wiper Insert
  • N (1)
Minimum Axial Groove Diameter
  • 3.937 (1)
to
Minimum Axial Groove Diameter
  • 100.0 (1)
to
Maximum Bore Depth
  • 115.0 (1)
to
Maximum Bore Depth
  • 4.528 (1)
to
Front-End
Clamp Style
  • S (1)
Insert Shape
  • R-ROUND (1)
Insert Geometry
Cutting Tool Material
  • C A (1)
  • H T (1)
  • H W (1)
Back-End
Back-End Diameter
  • 2.5 (1)
to
Back-End Diameter
  • 63.0 (1)
to
other
Platform
  • KM4X63 (1)
Tool Unit
  • M (1)
Over All Length [L]
  • 115.0 (1)
to
Over All Length [L]
  • 4.528 (1)
to
Insert Hand
  • N (1)
obsoleteFacet
  • false (1)
  • true (1)
Cutting Condition Material
  • H-All (1)
  • K-All (1)
  • M-All (1)
  • N-All (1)
  • P-All (1)
  • S-All (1)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 1 of 1 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
6275086 KM4X63SRDCN12115HPC KM4X63SRDCN12115HPC 115.0000 4.528 0.0000 .0000 RC..1204M0 1.93 4.25
    List price:
    $449.43 /each.
    Your price::
    Qty
    List price:
    Discount: %
    Your price::
    Replacement This item is not available
    Replacement Product This item may be available through a distributor
    Qty
    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
    You are about to create a duplicate . Do you want to proceed?
    You are about to delete Do you want to proceed?
    What would you like to rename your to?
    Please enter a valid name
    Please enter a name for the duplicate
    Please enter a valid name
    You are about to add to your My Solutions page. Do you want to proceed?
    Please enter a valid name
    Send a copy of

    Please enter a valid Email
    Please enter a valid name

    We have found the following CAD Drawings

    Select the files you are looking for and download them all at once

    You should be logged to see your dashboard information
    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
    item(s) successfully added to the cart
    View Cart