COVID-19: How WIDIA is responding
Grooving and Cut-Off Integral Holders
Grooving and Cut-Off Integral Holders
Grooving and Cut-Off Integral Holders
Grooving and Cut-Off Integral Holders

ProGroove™ Integral Toolholders • Grooving and Cut-Off

Grooving and Cut-Off Integral Holders

Uses and application

  • GroovingGrooving
  • Cut-OffCut-Off

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (9)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (9)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (9)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (9)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (9)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (9)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (9)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (9)
  • M Stainless Steel (9)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (9)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (9)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (9)
  • K Cast Iron (9)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9)
  • N Non-Ferrous Materials (9)
    • N1
      Wrought Aluminum
      (9)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (9)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (9)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (9)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (9)
    • N6
      Carbon, Graphite Composites, CFRP
      (9)
    • N7
      MMC's
      (9)
  • S High-Temp Alloys (9)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (9)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (9)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (9)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (9)
Applications
  • Cut-Off Cut-Off (26)
  • Deep Grooving Deep Grooving (26)
  • Multiple Direction Cutting Multiple Direction Cutting (26)
Tool Cutting Edge Angle
  • 90.0 (31)
to
Connection Style
  • Toolholder (31)
Cutting Edges Per Insert
  • 1.0 (9)
to
Corner configuration
Corner Radius
  • 0.2 (8)
  • 0.25 (8)
  • 0.3 (9)
  • 1.5 (4)
  • 2.0 (4)
  • 2.5 (1)
to
Corner Radius
  • 0.0079 (8)
  • 0.0098 (8)
  • 0.0118 (9)
  • 0.0591 (4)
  • 0.0787 (4)
  • 0.0984 (1)
to
Application
Grade Of Cutting Tool
  • THM (9)
  • TN200 (9)
  • TN6030 (9)
  • TN7525 (9)
  • TN7535 (9)
  • TN8025 (9)
  • TPC25 (9)
  • TPC35 (9)
  • WM35CT (9)
Hand Of Tool
  • L (15)
  • R (16)
Wiper Insert
  • N (9)
Cutting Direction
  • E (31)
Rake Angle Style
  • NEUTRAL (ZERO) (31)
Front-End
Clamp Style
  • Y (31)
Insert Shape
  • PRISMATIC (31)
Cutting Width
  • 3.0 (4)
  • 3.1 (4)
  • 3.25 (4)
  • 3.27 (4)
  • 4.0 (4)
  • 4.1 (4)
  • 4.25 (4)
  • 4.276 (4)
  • 5.0 (1)
  • 5.1 (1)
to
Cutting Width
  • 0.1181 (4)
  • 0.122 (4)
  • 0.128 (4)
  • 0.1287 (4)
  • 0.1575 (4)
  • 0.1614 (4)
  • 0.1673 (4)
  • 0.1683 (4)
  • 0.1969 (1)
  • 0.2008 (1)
to
Maximum Cutting Depth
  • 16.0 (2)
  • 20.0 (4)
  • 25.0 (8)
  • 25.001 (6)
  • 31.999 (1)
  • 32.0 (8)
  • 40.0 (2)
to
Maximum Cutting Depth
  • 0.6299 (2)
  • 0.7874 (4)
  • 0.9843 (14)
  • 1.2598 (9)
  • 1.5748 (2)
to
Insert Size
  • 2 (2)
  • 3 (10)
  • 4 (10)
  • 5 (5)
  • 6 (2)
  • 8 (2)
Insert Geometry
Cutting Tool Material
  • H W (9)
Back-End
Connection Type
  • SQUARE SHANK (31)
other
Grade
  • W (25)
Platform
  • ProGroove (24)
Tool Unit
  • I (9)
  • M (22)
Over All Length [L]
  • 100.0 (2)
  • 125.0 (4)
  • 127.0 (4)
  • 150.0 (6)
  • 152.4 (5)
  • 170.0 (10)
to
Over All Length [L]
  • 3.937 (2)
  • 4.9213 (4)
  • 5.0 (4)
  • 5.9055 (6)
  • 6.0 (5)
  • 6.6929 (10)
to
Insert Hand
  • L (8)
  • N (9)
  • R (8)
obsoleteFacet
  • true (31)
  • false (3)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 31 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [W] Groove Width [W] Groove Width [CD] Cutting Depth [CD] Cutting Depth [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [H1] Cutting Height [H1] Cutting Height
2962743 12250023000 12250023000   3 3.0990 .1220 20.0000 .7874 19.0500 .7500 19.0500 .7500 19.4010 .7638 127.0000 5.000 31.9990 1.259 19.0500 .7500
    2962744 12250023100 12250023100   3 3.0990 .1220 20.0000 .7874 19.0500 .7500 19.0500 .7500 19.4010 .7638 127.0000 5.000 31.9990 1.259 19.0500 .7500
      2962745 12250023200 12250023200 W 3 3.0990 .1220 25.0010 .9843 25.4000 1.000 25.4000 1.000 25.7050 1.012 152.4000 6.000 40.0000 1.574 25.4000 1.000
        2962746 12250023300 12250023300   3 3.0990 .1220 25.0010 .9843 25.4000 1.000 25.4000 1.000 25.7050 1.012 152.4000 6.000 40.0000 1.574 25.4000 1.000
          2962747 12250024000 12250024000   4 4.0890 .1610 25.0010 .9843 19.0500 .7500 19.0500 .7500 19.5020 .7678 127.0000 5.000 40.0000 1.574 19.0500 .7500
            2962748 12250024100 12250024100   4 4.0890 .1610 25.0010 .9843 19.0500 .7500 19.0500 .7500 19.5020 .7678 127.0000 5.000 40.0000 1.574 19.0500 .7500
              2962749 12250024200 12250024200 W 4 4.0890 .1610 25.0010 .9843 25.4000 1.000 25.4000 1.000 258.0640 10.160 152.4000 6.000 40.0000 1.574 25.4000 1.000
                2962750 12250024300 12250024300 W 4 4.0890 .1610 25.0010 .9843 25.4000 1.000 25.4000 1.000 25.8060 1.016 152.4000 6.000 40.0000 1.574 25.4000 1.000
                  2962751 12250025200 12250025200   5 5.1050 .2010 31.9990 1.259 25.4000 1.000 25.4000 1.000 25.8060 1.016 152.4000 6.000 53.0020 2.086 25.4000 1.000
                    2007136 12251782000 12251782000 W 2 2.1000 .0827 16.0000 .6299 16.0000 .6299 16.0000 .6299 16.2000 .6378 100.0000 3.937 27.0000 1.063 16.0000 .6299
                      2007139 12251782100 12251782100 W 2 2.1000 .0827 16.0000 .6299 16.0000 .6299 16.0000 .6299 16.2000 .6378 100.0000 3.937 27.0000 1.063 16.0000 .6299
                        2022560 12251783000 12251783000 W 3 3.1000 .1220 20.0000 .7874 20.0000 .7874 20.0000 .7874 20.3000 .7992 125.0000 4.921 32.0000 1.259 20.0000 .7874
                          2022561 12251783100 12251783100 W 3 3.1000 .1220 20.0000 .7874 20.0000 .7874 20.0000 .7874 20.3000 .7992 125.0000 4.921 32.0000 1.259 20.0000 .7874
                            2007142 12251783200 12251783200 W 3 3.1000 .1220 25.0000 .9843 25.0000 .9843 25.0000 .9843 25.3000 .9961 150.0000 5.905 40.0000 1.574 25.0000 .9842
                              2007145 12251783300 12251783300 W 3 3.1000 .1220 25.0000 .9843 25.0000 .9843 25.0000 .9843 25.3000 .9961 150.0000 5.905 40.0000 1.574 25.0000 .9842
                                2008153 12251783600 12251783600 W 3 3.1000 .1220 25.0000 .9843 32.0000 1.259 25.0000 .9843 25.3000 .9961 170.0000 6.692 40.0000 1.574 32.0000 1.259
                                  2008150 12251783700 12251783700 W 3 3.1000 .1220 25.0000 .9843 32.0000 1.259 25.0000 .9843 25.3000 .9961 170.0000 6.692 40.0000 1.574 32.0000 1.259
                                    2022562 12251784000 12251784000 W 4 4.1000 .1614 25.0000 .9843 20.0000 .7874 20.0000 .7874 20.4000 .8031 125.0000 4.921 40.0000 1.574 20.0000 .7874
                                      2022563 12251784100 12251784100 W 4 4.1000 .1614 25.0000 .9843 20.0000 .7874 20.0000 .7874 20.4000 .8031 125.0000 4.921 40.0000 1.574 20.0000 .7874
                                        2007148 12251784200 12251784200 W 4 4.1000 .1614 25.0000 .9843 25.0000 .9843 25.0000 .9843 25.4000 1.000 150.0000 5.905 40.0000 1.574 25.0000 .9842
                                          2007151 12251784300 12251784300 W 4 4.1000 .1614 25.0000 .9843 25.0000 .9843 25.0000 .9843 25.4000 1.000 150.0000 5.905 40.0000 1.574 25.0000 .9842
                                            2015814 12251784400 12251784400 W 4 4.1000 .1614 32.0000 1.259 32.0000 1.259 25.0000 .9843 25.4000 1.000 170.0000 6.692 53.0000 2.086 32.0000 1.259
                                              2015816 12251784500 12251784500 W 4 4.1000 .1614 32.0000 1.259 32.0000 1.259 25.0000 .9843 25.4000 1.000 170.0000 6.692 53.0000 2.086 32.0000 1.259
                                                2022564 12251785200 12251785200 W 5 5.1000 .2008 32.0000 1.259 25.0000 .9843 25.0000 .9843 25.4000 1.000 150.0000 5.905 53.0000 2.086 25.0000 .9842
                                                  2022565 12251785300 12251785300 W 5 5.1000 .2008 32.0000 1.259 25.0000 .9843 25.0000 .9843 25.4000 1.000 150.0000 5.905 53.0000 2.086 25.0000 .9842
                                                    2022566 12251785400 12251785400 W 5 5.1000 .2008 32.0000 1.259 32.0000 1.259 25.0000 .9843 25.4000 1.000 170.0000 6.692 53.0000 2.086 32.0000 1.259
                                                      2022567 12251785500 12251785500 W 5 5.1000 .2008 32.0000 1.259 32.0000 1.259 25.0000 .9843 25.4000 1.000 170.0000 6.692 53.0000 2.086 32.0000 1.259
                                                        2022568 12251786400 12251786400 W 6 6.1000 .2402 32.0000 1.259 32.0000 1.259 25.0000 .9843 25.5000 1.003 170.0000 6.692 53.0000 2.086 32.0000 1.259
                                                          2015839 12251786500 12251786500 W 6 6.1000 .2402 32.0000 1.259 32.0000 1.259 25.0000 .9843 25.5000 1.003 170.0000 6.692 53.0000 2.086 32.0000 1.259
                                                            2022569 12251788400 12251788400 W 8 8.1000 .3189 40.0000 1.574 32.0000 1.259 25.0000 .9843 25.6000 1.007 170.0000 6.692 66.0000 2.598 32.0000 1.259
                                                              2015842 12251788500 12251788500 W 8 8.1000 .3189 40.0000 1.574 32.0000 1.259 25.0000 .9843 25.6000 1.007 170.0000 6.692 66.0000 2.598 32.0000 1.259
                                                                List price:
                                                                Discount: %
                                                                Your price::
                                                                Replacement This item is not available
                                                                Replacement Product This item may be available through a distributor
                                                                Qty

                                                                Grades

                                                                • W
                                                                  P Steel
                                                                  M Stainless Steel
                                                                  K Cast Iron
                                                                  N Non-Ferrous
                                                                  S High-Temp Alloys
                                                                If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                You are about to create a duplicate . Do you want to proceed?
                                                                You are about to delete Do you want to proceed?
                                                                What would you like to rename your to?
                                                                Please enter a valid name
                                                                Please enter a name for the duplicate
                                                                Please enter a valid name
                                                                You are about to add to your My Solutions page. Do you want to proceed?
                                                                Please enter a valid name
                                                                Send a copy of

                                                                Please enter a valid Email
                                                                Please enter a valid name

                                                                We have found the following CAD Drawings

                                                                Select the files you are looking for and download them all at once

                                                                You should be logged to see your dashboard information
                                                                The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                item(s) successfully added to the cart
                                                                View Cart