successfully added to cart
View Cart
COVID-19: How WIDIA is responding
TopThread™ and TopGroove™
TopThread™ and TopGroove™
TopThread™ and TopGroove™
TopThread™ and TopGroove™

NE 90° • Steel

TopThread™ and TopGroove™

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (18)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (18)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (18)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (18)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (18)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (18)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (18)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (18)
  • M Stainless Steel (18)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (18)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (18)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (18)
  • K Cast Iron (18)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (18)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (18)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (18)
  • N Non-Ferrous Materials (18)
    • N1
      Wrought Aluminum
      (18)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (18)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (18)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (18)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (18)
    • N6
      Carbon, Graphite Composites, CFRP
      (18)
    • N7
      MMC's
      (18)
  • S High-Temp Alloys (18)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (18)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (18)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (18)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (18)
  • H Hardened Materials (18)
    • H1
      Hardened Materials 44-48 HRC
      (18)
    • H2
      Hardened Materials 48-55 HRC
      (18)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
  • Back Boring Back Boring (18)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (18)
  • Blind Hole Finishing Blind Hole Finishing (18)
  • Chamfer Turning Chamfer Turning (18)
  • Cut-Off Cut-Off (18)
  • Deep Grooving Deep Grooving (18)
  • Face Grooving Face Grooving (18)
  • Facing Facing (18)
  • Grooving Grooving (18)
  • ID Grooving ID Grooving (18)
  • ID Thread Turning ID Thread Turning (18)
  • Multiple Direction Cutting Multiple Direction Cutting (18)
  • OD Thread Turning OD Thread Turning (18)
  • Plunge Turning Plunge Turning (18)
  • Profiling Profiling (18)
  • TRN Boring TRN Boring (18)
  • Threading Threading (18)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (18)
  • Through Hole Finishing Through Hole Finishing (18)
  • Turning Turning (18)
Type of Thread
  • 60 (18)
  • ACME (8)
  • API (8)
  • API RD (8)
  • BSW (8)
  • BUTTRESS (18)
  • M (13)
  • NPT (8)
  • STUB ACME (8)
  • UN (18)
  • UNJ (8)
Cutting Condition
  • Heavily Interrupted Cut (18)
  • Lightly Interrupted Cut (18)
  • Smooth Cut (18)
  • Varying Depth of Cut (18)
Tool Cutting Edge Angle
  • 90.0 (18)
to
Connection Style
  • KM (18)
Cutting Edges Per Insert
  • 1.0 (18)
  • 2.0 (18)
to
Corner configuration
Corner Radius
  • 0.026 (4)
  • 0.051 (4)
  • 0.057 (4)
  • 0.066 (8)
  • 0.076 (18)
  • 0.08 (18)
  • 0.089 (14)
  • 0.09 (14)
  • 0.094 (8)
  • 0.097 (4)
  • 0.1 (18)
  • 0.102 (18)
  • 0.116 (4)
  • 0.117 (4)
  • 0.127 (8)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.15 (8)
  • 0.155 (8)
  • 0.157 (8)
  • 0.165 (8)
  • 0.173 (8)
  • 0.178 (8)
  • 0.18 (5)
  • 0.185 (5)
  • 0.19 (18)
  • 0.191 (18)
  • 0.198 (8)
  • 0.2 (8)
  • 0.202 (13)
  • 0.224 (8)
  • 0.235 (8)
  • 0.244 (4)
  • 0.25 (8)
  • 0.251 (8)
  • 0.254 (8)
  • 0.255 (4)
  • 0.269 (8)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (8)
  • 0.315 (8)
  • 0.318 (8)
  • 0.33 (8)
  • 0.34 (8)
  • 0.343 (9)
  • 0.356 (8)
  • 0.404 (8)
  • 0.406 (8)
  • 0.43 (8)
  • 0.445 (8)
  • 0.472 (4)
  • 0.49 (8)
  • 0.5 (10)
  • 0.508 (8)
  • 0.57 (4)
  • 0.572 (8)
  • 0.575 (4)
  • 0.75 (10)
  • 0.787 (18)
  • 0.902 (8)
  • 1.0 (18)
  • 1.194 (18)
  • 1.195 (4)
  • 1.25 (18)
  • 1.5 (18)
  • 1.585 (8)
  • 1.588 (18)
  • 1.75 (18)
  • 1.98 (4)
  • 1.981 (8)
  • 2.0 (8)
  • 2.25 (8)
  • 2.388 (8)
to
Corner Radius
  • 0.002 (4)
  • 0.0023 (4)
  • 0.0026 (8)
  • 0.003 (18)
  • 0.0031 (18)
  • 0.0035 (14)
  • 0.0037 (8)
  • 0.0038 (4)
  • 0.004 (18)
  • 0.0046 (8)
  • 0.005 (8)
  • 0.0052 (8)
  • 0.0053 (8)
  • 0.0059 (8)
  • 0.006 (8)
  • 0.0062 (8)
  • 0.0065 (8)
  • 0.0068 (8)
  • 0.007 (8)
  • 0.0075 (18)
  • 0.0078 (8)
  • 0.0079 (4)
  • 0.008 (13)
  • 0.0088 (8)
  • 0.0093 (8)
  • 0.0096 (4)
  • 0.0099 (8)
  • 0.01 (8)
  • 0.0106 (8)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (8)
  • 0.0124 (8)
  • 0.0125 (8)
  • 0.013 (8)
  • 0.0135 (13)
  • 0.014 (8)
  • 0.0159 (8)
  • 0.016 (8)
  • 0.017 (8)
  • 0.0175 (8)
  • 0.0186 (4)
  • 0.0193 (8)
  • 0.0197 (10)
  • 0.02 (8)
  • 0.0225 (8)
  • 0.0295 (10)
  • 0.031 (18)
  • 0.0355 (8)
  • 0.0394 (18)
  • 0.047 (18)
  • 0.0492 (18)
  • 0.0591 (18)
  • 0.0625 (18)
  • 0.0689 (18)
  • 0.078 (8)
  • 0.0787 (8)
  • 0.0886 (8)
  • 0.094 (8)
  • 0.106 (4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (18)
  • K313 (18)
  • K420 (18)
  • K4H (13)
  • K68 (18)
  • KB1345 (8)
  • KB1630 (8)
  • KB5625 (8)
  • KC250 (18)
  • KC5010 (18)
  • KC5025 (18)
  • KC5410 (18)
  • KC710 (18)
  • KC720 (18)
  • KC722 (18)
  • KC730 (18)
  • KC732 (8)
  • KC810 (18)
  • KC850 (18)
  • KC910 (13)
  • KC9110 (18)
  • KC9120 (8)
  • KC9320 (18)
  • KC935 (18)
  • KC950 (18)
  • KCK20 (13)
  • KCK20B (18)
  • KCP10B (18)
  • KCP25B (18)
  • KCU10 (18)
  • KCU25 (18)
  • KD050 (4)
  • KD081 (8)
  • KD100 (8)
  • KD120 (8)
  • KD1425 (8)
  • KT175 (18)
  • KT315 (18)
  • KU10T (18)
  • KU25T (18)
  • KU30T (18)
  • KY3000 (8)
  • THM (18)
  • TN10P (13)
  • TN6010 (18)
  • TN6025 (18)
  • TN7110 (18)
  • WU10HT (4)
  • WU10PT (5)
  • WU25PT (4)
Hand Of Tool
  • L (9)
  • R (9)
Wiper Insert
  • N (18)
Minimum Axial Groove Diameter
  • 0.7283 (2)
  • 0.7874 (2)
  • 0.984 (1)
  • 0.9843 (1)
  • 1.2598 (4)
  • 1.3386 (4)
  • 1.5748 (4)
to
Minimum Axial Groove Diameter
  • 18.5 (2)
  • 20.0 (2)
  • 25.0 (2)
  • 32.0 (4)
  • 34.0 (4)
  • 40.0 (4)
to
Maximum Axial Groove Diameter
  • 9999.0 (18)
to
Maximum Axial Groove Diameter
  • 393.661 (18)
to
Cutting Direction
  • S (18)
Rake Angle Style
  • NEUTRAL (ZERO) (18)
Maximum Bore Depth
  • 42.03 (2)
  • 55.09 (4)
  • 56.11 (2)
  • 70.02 (2)
  • 75.04 (4)
  • 76.02 (2)
  • 96.02 (2)
to
Maximum Bore Depth
  • 1.6547 (2)
  • 2.1689 (4)
  • 2.2091 (2)
  • 2.757 (2)
  • 2.9543 (4)
  • 2.9929 (2)
  • 3.7803 (2)
to
Boring Bar Material
  • S (18)
Front-End
Clamp Style
  • N (18)
Insert Shape
  • TN-TOP NOTCH (18)
Cutting Width
  • 0.5 (10)
  • 0.787 (10)
  • 0.8 (10)
  • 0.889 (10)
  • 0.991 (10)
  • 1.0 (18)
  • 1.041 (10)
  • 1.19 (14)
  • 1.194 (18)
  • 1.199 (5)
  • 1.2 (18)
  • 1.39 (10)
  • 1.397 (10)
  • 1.4 (10)
  • 1.473 (10)
  • 1.5 (18)
  • 1.56 (5)
  • 1.57 (13)
  • 1.575 (18)
  • 1.69 (10)
  • 1.7 (10)
  • 1.702 (10)
  • 1.75 (18)
  • 1.829 (8)
  • 1.94 (10)
  • 1.95 (10)
  • 1.956 (10)
  • 1.981 (8)
  • 2.0 (18)
  • 2.007 (10)
  • 2.2 (18)
  • 2.235 (18)
  • 2.24 (14)
  • 2.25 (14)
  • 2.388 (18)
  • 2.39 (4)
  • 2.464 (8)
  • 2.5 (18)
  • 2.667 (8)
  • 2.74 (10)
  • 2.743 (18)
  • 2.75 (18)
  • 2.794 (8)
  • 2.997 (18)
  • 3.0 (18)
  • 3.099 (8)
  • 3.17 (8)
  • 3.175 (18)
  • 3.18 (5)
  • 3.2 (18)
  • 3.245 (10)
  • 3.25 (8)
  • 3.251 (18)
  • 3.27 (10)
  • 3.32 (4)
  • 3.329 (4)
  • 3.5 (18)
  • 3.607 (8)
  • 3.73 (5)
  • 3.81 (10)
  • 3.84 (10)
  • 3.96 (8)
  • 3.962 (8)
  • 3.974 (4)
  • 3.988 (8)
  • 4.0 (8)
  • 4.24 (4)
  • 4.242 (8)
  • 4.25 (4)
  • 4.3 (8)
  • 4.5 (8)
  • 4.521 (8)
  • 4.699 (8)
  • 4.775 (8)
  • 4.8 (8)
  • 4.801 (8)
  • 4.81 (8)
  • 4.88 (4)
  • 4.95 (8)
to
Cutting Width
  • 0.0197 (10)
  • 0.031 (10)
  • 0.0315 (10)
  • 0.035 (10)
  • 0.039 (10)
  • 0.0394 (18)
  • 0.041 (10)
  • 0.047 (18)
  • 0.0472 (18)
  • 0.055 (10)
  • 0.0551 (10)
  • 0.058 (10)
  • 0.0591 (18)
  • 0.062 (18)
  • 0.0669 (10)
  • 0.067 (10)
  • 0.0689 (18)
  • 0.072 (8)
  • 0.076 (10)
  • 0.0768 (10)
  • 0.077 (10)
  • 0.078 (8)
  • 0.0787 (18)
  • 0.079 (14)
  • 0.0866 (18)
  • 0.088 (18)
  • 0.0886 (14)
  • 0.094 (18)
  • 0.097 (8)
  • 0.0984 (18)
  • 0.105 (8)
  • 0.108 (18)
  • 0.1083 (18)
  • 0.11 (8)
  • 0.118 (18)
  • 0.1181 (18)
  • 0.122 (8)
  • 0.125 (18)
  • 0.126 (18)
  • 0.1278 (10)
  • 0.128 (18)
  • 0.129 (10)
  • 0.131 (4)
  • 0.1378 (18)
  • 0.142 (8)
  • 0.147 (5)
  • 0.15 (10)
  • 0.151 (10)
  • 0.156 (8)
  • 0.157 (8)
  • 0.1574 (8)
  • 0.1575 (8)
  • 0.167 (8)
  • 0.1673 (4)
  • 0.169 (8)
  • 0.1771 (8)
  • 0.1772 (8)
  • 0.178 (8)
  • 0.185 (8)
  • 0.188 (8)
  • 0.189 (8)
  • 0.192 (4)
  • 0.195 (8)
to
Maximum Cutting Depth
  • 3.51 (10)
  • 5.33 (8)
to
Maximum Cutting Depth
  • 0.138 (10)
  • 0.21 (8)
to
Insert Size
  • 2 (10)
  • 3 (8)
Insert Geometry
Cutting Tool Material
  • B H (8)
  • B L (8)
  • C N (8)
  • D P (8)
  • H T (18)
  • H W (18)
Back-End
Connection Type
  • TAPER SHANK (18)
System Size
  • KM40TS (18)
Back-End Diameter
  • 1.5748 (18)
to
Back-End Diameter
  • 40.0 (18)
to
other
Platform
  • KM40 (18)
Tool Unit
  • I (18)
  • M (18)
Over All Length [L]
  • 70.0 (6)
  • 80.0 (2)
  • 90.0 (4)
  • 100.0 (4)
  • 110.0 (2)
to
Over All Length [L]
  • 2.7559 (6)
  • 3.1496 (2)
  • 3.543 (2)
  • 3.5433 (2)
  • 3.937 (4)
  • 4.3307 (2)
to
Insert Hand
  • L (9)
  • R (9)
obsoleteFacet
  • false (18)
  • true (18)
Cutting Condition Material
  • H-All (18)
  • K-All (18)
  • M-All (18)
  • N-All (18)
  • P-All (18)
  • S-All (18)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 18 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3955480 KM40TSS12ENEL2 KM40TSS12ENEL2 12.0000 .4724 18.5000 .7283 11.0000 .4331 42.0300 1.654 70.0000 2.755 NG2R 0.27 0.59
    List price:
    $382.0 /each.
    Your price::
    Qty
    3955481 KM40TSS12ENER2 KM40TSS12ENER2 12.0000 .4724 18.5000 .7283 11.0000 .4331 42.0300 1.654 70.0000 2.755 NG2L 0.27 0.58
      List price:
      $382.0 /each.
      Your price::
      Qty
      3955482 KM40TSS16FNEL2 KM40TSS16FNEL2 16.0000 .6299 20.0000 .7874 11.0000 .4331 56.1100 2.209 80.0000 3.149 NG2R 0.28 0.62
        List price:
        $382.0 /each.
        Your price::
        Qty
        3955483 KM40TSS16FNER2 KM40TSS16FNER2 16.0000 .6299 20.0000 .7874 11.0000 .4331 56.1100 2.209 80.0000 3.149 NG2L 0.28 0.62
          List price:
          $382.0 /each.
          Your price::
          Qty
          3955484 KM40TSS20GNEL2 KM40TSS20GNEL2 20.0000 .7870 25.0000 .9840 13.0000 .5120 70.0200 2.757 90.0000 3.543 NG2R 0.35 0.76
            List price:
            $382.0 /each.
            Your price::
            Qty
            3955485 KM40TSS20GNER2 KM40TSS20GNER2 20.0000 .7874 25.0000 .9843 13.0000 .5120 70.0200 2.757 90.0000 3.543 NG2L 0.35 0.76
              List price:
              $382.0 /each.
              Your price::
              Qty
              3955486 KM40TSS25ENEL2 KM40TSS25ENEL2 25.0000 .9843 32.0000 1.259 17.0000 .6693 55.0900 2.168 70.0000 2.755 NG2R 0.34 0.75
                List price:
                $382.0 /each.
                Your price::
                Qty
                3955490 KM40TSS25ENEL3 KM40TSS25ENEL3 25.0000 .9843 34.0000 1.338 17.0000 .6693 55.0900 2.168 70.0000 2.755 NG3R 0.35 0.77
                  List price:
                  $382.0 /each.
                  Your price::
                  Qty
                  3955487 KM40TSS25ENER2 KM40TSS25ENER2 25.0000 .9843 32.0000 1.259 17.0000 .6693 55.0900 2.168 70.0000 2.755 NG2L 0.34 0.75
                    List price:
                    $382.0 /each.
                    Your price::
                    Qty
                    3955491 KM40TSS25ENER3 KM40TSS25ENER3 25.0000 .9843 34.0000 1.338 17.0000 .6693 55.0900 2.168 70.0000 2.755 NG3L 0.35 0.77
                      List price:
                      $382.0 /each.
                      Your price::
                      Qty
                      3955488 KM40TSS25HNEL2 KM40TSS25HNEL2 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 NG2R 0.49 1.08
                        List price:
                        $382.0 /each.
                        Your price::
                        Qty
                        3955492 KM40TSS25HNEL3 KM40TSS25HNEL3 25.0000 .9843 34.0000 1.338 17.0000 .6693 75.0400 2.954 100.0000 3.937 NG3R 0.49 1.09
                          List price:
                          $382.0 /each.
                          Your price::
                          Qty
                          3955489 KM40TSS25HNER2 KM40TSS25HNER2 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 NG2L 0.49 1.08
                            List price:
                            $382.0 /each.
                            Your price::
                            Qty
                            3955493 KM40TSS25HNER3 KM40TSS25HNER3 25.0000 .9843 34.0000 1.338 17.0000 .6693 75.0400 2.954 100.0000 3.937 NG3L 0.49 1.09
                              List price:
                              $382.0 /each.
                              Your price::
                              Qty
                              3955496 KM40TSS32GNEL3 KM40TSS32GNEL3 32.0000 1.259 40.0000 1.574 22.0000 .8661 76.0200 2.992 90.0000 3.543 NG3R 0.55 1.21
                                List price:
                                $382.0 /each.
                                Your price::
                                Qty
                                3955497 KM40TSS32GNER3 KM40TSS32GNER3 32.0000 1.259 40.0000 1.574 22.0000 .8661 76.0200 2.992 90.0000 3.543 NG3L 0.55 1.21
                                  List price:
                                  $382.0 /each.
                                  Your price::
                                  Qty
                                  3955494 KM40TSS32JNEL3 KM40TSS32JNEL3 32.0000 1.259 40.0000 1.574 22.0000 .8661 96.0200 3.780 110.0000 4.330 NG3R 0.67 1.48
                                    List price:
                                    $382.0 /each.
                                    Your price::
                                    Qty
                                    3955495 KM40TSS32JNER3 KM40TSS32JNER3 32.0000 1.259 40.0000 1.574 22.0000 .8661 96.0200 3.780 110.0000 4.330 NG3L 0.67 1.48
                                      List price:
                                      $382.0 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                      You are about to create a duplicate . Do you want to proceed?
                                      You are about to delete Do you want to proceed?
                                      What would you like to rename your to?
                                      Please enter a valid name
                                      Please enter a name for the duplicate
                                      Please enter a valid name
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Please enter a valid name
                                      Send a copy of

                                      Please enter a valid Email
                                      Please enter a valid name

                                      We have found the following CAD Drawings

                                      Select the files you are looking for and download them all at once

                                      You should be logged to see your dashboard information
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                      item(s) successfully added to the cart
                                      View Cart