COVID-19: How WIDIA is responding
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
Victory™ Solid Carbide Thread Mills • Blind and Through Holes

GTM21 • Metric and Metric Fine • Through Coolant

Victory™ Solid Carbide Thread Mills • Blind and Through Holes

Uses and application

  • Counter Sinking/ Stroke ChamferingCounter Sinking/ Stroke Chamfering
  • Threading: Through HoleThreading: Through Hole
  • Threading: Blind HoleThreading: Blind Hole
  • HMHM
  • Drilling Depth: 2xDrilling Depth: 2x
  • Through Coolant: Axial: TappingThrough Coolant: Axial: Tapping
  • Manufacturer’s Specs: MManufacturer’s Specs: M
  • Manufacturer’s Specs: MFManufacturer’s Specs: MF

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (16)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (16)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (16)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (16)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (16)
  • M Stainless Steel (16)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (16)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (16)
  • K Cast Iron (16)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (16)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (16)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (16)
  • N Non-Ferrous Materials (16)
    • N1
      Wrought Aluminum
      (16)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (16)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (16)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (16)
    • N6
      Carbon, Graphite Composites, CFRP
      (16)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (16)
Applications
  • Thread Milling Thread Milling (16)
Cutting Diameter
  • 4.0 (1)
  • 4.8 (1)
  • 5.0 (1)
  • 6.5 (1)
  • 6.7 (1)
  • 8.2 (1)
  • 8.4 (1)
  • 8.7 (1)
  • 9.9 (1)
  • 10.1 (1)
  • 10.4 (1)
  • 10.6 (1)
  • 11.6 (1)
  • 12.1 (1)
  • 13.6 (1)
  • 14.0 (1)
to
Cutting Diameter
  • 0.1575 (1)
  • 0.189 (1)
  • 0.1969 (1)
  • 0.2559 (1)
  • 0.2638 (1)
  • 0.3228 (1)
  • 0.3307 (1)
  • 0.3425 (1)
  • 0.3898 (1)
  • 0.3976 (1)
  • 0.4094 (1)
  • 0.4173 (1)
  • 0.4567 (1)
  • 0.4764 (1)
  • 0.5354 (1)
  • 0.5512 (1)
to
Type of Thread
  • M (7)
  • MF (9)
Tool Cutting Edge Angle
  • 90.0 (15)
to
Connection Style
  • Straight-Cylindrical (16)
Corner configuration
Corner Radius
  • 0.0 (16)
to
Corner Radius
  • 0.0 (16)
to
Corner Chamfer
  • 0.0 (16)
to
Corner Chamfer
  • 0.0 (16)
to
Application
Grade Of Cutting Tool
  • WU12PV (16)
Hand Of Tool
  • R (16)
Front-End
Thread Pitch
  • 0.75 (1)
  • 0.8 (1)
  • 1.0 (4)
  • 1.25 (3)
  • 1.5 (4)
  • 1.75 (1)
  • 2.0 (2)
to
Thread Pitch
  • 0.75 (1)
  • 0.8 (1)
  • 1.0 (4)
  • 1.25 (3)
  • 1.5 (4)
  • 1.75 (1)
  • 2.0 (2)
to
Back-End
Connection Type
  • CYLINDRICAL (16)
Back-End Diameter
  • 0.2362 (1)
  • 0.315 (2)
  • 0.3937 (2)
  • 0.4724 (3)
  • 0.5512 (4)
  • 0.6299 (2)
  • 0.7087 (2)
to
Back-End Diameter
  • 6.0 (1)
  • 8.0 (2)
  • 10.0 (2)
  • 12.0 (3)
  • 14.0 (4)
  • 16.0 (2)
  • 18.0 (2)
to
other
Grade
  • WU12PV (16)
Platform
  • GTM21 (3)
Tool Unit
  • M (16)
Over All Length [L]
  • 55.0 (1)
  • 62.0 (2)
  • 74.0 (2)
  • 80.0 (3)
  • 90.0 (4)
  • 100.0 (2)
  • 102.0 (2)
to
Over All Length [L]
  • 2.1654 (1)
  • 2.4409 (2)
  • 2.9134 (2)
  • 3.1496 (3)
  • 3.5433 (4)
  • 3.937 (2)
  • 4.0157 (2)
to
obsoleteFacet
  • true (16)
  • false (3)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 16 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TDZ] Thread Diameter Size [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [DCH] Chamfer Diameter [DCH] Chamfer Diameter [LTHD] Thread Length [LTHD] Thread Length [LDCH] Chamfer Length-Tool Front [LDCH] Chamfer Length-Tool Front [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Effective Cutting Edges on Face
4138514 GTM215001 GTM215001 WU12PV M5X0.8 4.0000 .1575 5.3000 .2087 10.8200 .4260 11.4000 .4488 55.0000 2.165 36.0 1.417 6.0 .2362 3
    4138515 GTM215002 GTM215002 WU12PV M6X1 4.8000 .1890 6.3000 .2480 12.5200 .4929 13.1900 .5193 62.0000 2.440 36.0 1.417 8.0 .315 3
      4138516 GTM215003 GTM215003 WU12PV M8X1.25 6.5000 .2559 8.3000 .3268 16.9100 .6657 17.7100 .6972 74.0000 2.913 40.0 1.574 10.0 .3937 3
        4138517 GTM215004 GTM215004 WU12PV M10X1.5 8.2000 .3228 10.3000 .4055 20.2900 .7988 21.2200 .8354 80.0000 3.149 45.0 1.771 12.0 .4724 3
          4138518 GTM215005 GTM215005 WU12PV M12X1.75 9.9000 .3898 12.3000 .4843 25.4200 1.000 26.4800 1.042 90.0000 3.543 45.0 1.771 14.0 .5512 4
            4138519 GTM215006 GTM215006 WU12PV M14X2 11.6000 .4567 14.3000 .5630 29.0500 1.143 30.2400 1.190 100.0000 3.937 48.0 1.889 16.0 .6299 4
              4138520 GTM215007 GTM215007 WU12PV M16X2 13.6000 .5354 16.3000 .6417 33.0500 1.301 34.2400 1.348 102.0000 4.015 48.0 1.889 18.0 .7087 4
                4138521 GTM215008 GTM215008 WU12PV M6X0.75 5.0000 .1969 6.3000 .2480 12.4000 .4882 12.9700 .5106 62.0000 2.440 36.0 1.417 8.0 .315 3
                  4138522 GTM215009 GTM215009 WU12PV M8X1 6.7000 .2638 8.3000 .3268 16.5300 .6508 17.2300 .6783 74.0000 2.913 40.0 1.574 10.0 .3937 3
                    4138523 GTM215010 GTM215010 WU12PV M10X1 8.7000 .3425 10.3000 .4055 20.5500 .8091 21.2300 .8358 80.0000 3.149 45.0 1.771 12.0 .4724 3
                      4138524 GTM215011 GTM215011 WU12PV M10X1.25 8.4000 .3307 10.3000 .4055 20.6700 .8138 21.5000 .8465 80.0000 3.149 45.0 1.771 12.0 .4724 3
                        4138525 GTM215012 GTM215012 WU12PV M12X1 10.6000 .4173 12.3000 .4843 24.5600 .9669 25.2700 .9949 90.0000 3.543 45.0 1.771 14.0 .5512 4
                          4138526 GTM215013 GTM215013 WU12PV M12X1.25 10.4000 .4094 12.3000 .4843 24.4300 .9618 25.2400 .9937 90.0000 3.543 45.0 1.771 14.0 .5512 4
                            4138527 GTM215014 GTM215014 WU12PV M12X1.5 10.1000 .3976 12.3000 .4843 24.8000 .9764 25.7600 1.014 90.0000 3.543 45.0 1.771 14.0 .5512 4
                              4138528 GTM215015 GTM215015 WU12PV M14X1.5 12.1000 .4764 14.3000 .5630 29.3100 1.153 30.2500 1.190 100.0000 3.937 48.0 1.889 16.0 .6299 4
                                4138529 GTM215016 GTM215016 WU12PV M16X1.5 14.0000 .5512 16.3000 .6417 32.3100 1.272 33.3000 1.311 102.0000 4.015 48.0 1.889 18.0 .7087 4
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty

                                  Grades

                                  • WU12PV

                                    Coated carbide. PVD fine-grain carbide substrate with high-hardness TiCN coating.
                                    Universal grade for thread milling most materials.

                                    P Steel
                                    M Stainless Steel
                                    K Cast Iron
                                    N Non-Ferrous
                                    S High-Temp Alloys
                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                  You are about to create a duplicate . Do you want to proceed?
                                  You are about to delete Do you want to proceed?
                                  What would you like to rename your to?
                                  Please enter a valid name
                                  Please enter a name for the duplicate
                                  Please enter a valid name
                                  You are about to add to your My Solutions page. Do you want to proceed?
                                  Please enter a valid name
                                  Send a copy of

                                  Please enter a valid Email
                                  Please enter a valid name

                                  We have found the following CAD Drawings

                                  Select the files you are looking for and download them all at once

                                  You should be logged to see your dashboard information
                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                  item(s) successfully added to the cart
                                  View Cart