COVID-19: How WIDIA is responding
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
Victory™ Solid Carbide Thread Mills • Blind and Through Holes

GTM11 • Metric and Metric Fine • Through Coolant

Victory™ Solid Carbide Thread Mills • Blind and Through Holes

Uses and application

  • Threading: Through HoleThreading: Through Hole
  • Threading: Blind HoleThreading: Blind Hole
  • HMHM
  • Drilling Depth: 2xDrilling Depth: 2x
  • Through Coolant: Axial: TappingThrough Coolant: Axial: Tapping
  • Manufacturer’s Specs: MManufacturer’s Specs: M
  • Manufacturer’s Specs: MFManufacturer’s Specs: MF

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (20)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (20)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (20)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (20)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (20)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (20)
  • M Stainless Steel (20)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (20)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (20)
  • K Cast Iron (20)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (20)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (20)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (20)
  • N Non-Ferrous Materials (20)
    • N1
      Wrought Aluminum
      (20)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (20)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (20)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (20)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (20)
    • N6
      Carbon, Graphite Composites, CFRP
      (20)
  • S High-Temp Alloys (20)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (20)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (20)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (20)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (20)
Applications
  • Thread Milling Thread Milling (20)
Cutting Diameter
  • 2.4 (1)
  • 3.15 (1)
  • 3.35 (1)
  • 4.0 (1)
  • 4.3 (1)
  • 4.8 (1)
  • 5.0 (1)
  • 5.9 (3)
  • 7.9 (2)
  • 9.9 (3)
  • 11.6 (1)
  • 11.9 (2)
  • 13.9 (2)
to
Cutting Diameter
  • 0.0945 (1)
  • 0.124 (1)
  • 0.1319 (1)
  • 0.1575 (1)
  • 0.1693 (1)
  • 0.189 (1)
  • 0.1969 (1)
  • 0.2323 (3)
  • 0.311 (2)
  • 0.3898 (3)
  • 0.4567 (1)
  • 0.4685 (2)
  • 0.5472 (2)
to
Cutting Length
  • 0.2457 (1)
  • 0.3244 (1)
  • 0.3437 (1)
  • 0.4031 (1)
  • 0.4244 (1)
  • 0.4866 (1)
  • 0.4913 (1)
  • 0.6472 (1)
  • 0.6626 (2)
  • 0.7969 (1)
  • 0.8055 (1)
  • 0.9634 (1)
  • 0.9728 (1)
  • 1.1402 (1)
  • 1.148 (1)
  • 1.2661 (1)
  • 1.2965 (1)
  • 1.5224 (1)
  • 1.6205 (1)
to
Cutting Length
  • 6.24 (1)
  • 8.24 (1)
  • 8.73 (1)
  • 10.24 (1)
  • 10.78 (1)
  • 12.36 (1)
  • 12.48 (1)
  • 16.44 (1)
  • 16.83 (2)
  • 20.24 (1)
  • 20.46 (1)
  • 24.47 (1)
  • 24.71 (1)
  • 28.96 (1)
  • 29.16 (1)
  • 32.16 (1)
  • 32.93 (1)
  • 38.67 (1)
  • 41.16 (1)
to
Type of Thread
  • M (9)
  • MF (11)
Reach
  • 6.5 (1)
  • 8.51 (1)
  • 9.07 (1)
  • 10.53 (1)
  • 11.16 (1)
  • 12.36 (1)
  • 12.48 (1)
  • 16.44 (1)
  • 16.83 (2)
  • 20.24 (1)
  • 20.46 (1)
  • 24.47 (1)
  • 24.71 (1)
  • 28.96 (1)
  • 29.16 (1)
  • 32.16 (1)
  • 32.93 (1)
  • 38.67 (1)
  • 41.16 (1)
to
Reach
  • 0.2559 (1)
  • 0.335 (1)
  • 0.3571 (1)
  • 0.4146 (1)
  • 0.4394 (1)
  • 0.4866 (1)
  • 0.4913 (1)
  • 0.6472 (1)
  • 0.6626 (2)
  • 0.7969 (1)
  • 0.8055 (1)
  • 0.9634 (1)
  • 0.9728 (1)
  • 1.1402 (1)
  • 1.148 (1)
  • 1.2661 (1)
  • 1.2965 (1)
  • 1.5224 (1)
  • 1.6205 (1)
to
Tool Cutting Edge Angle
  • 90.0 (20)
to
Connection Style
  • Straight-Cylindrical (20)
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.0 (20)
to
Corner Radius
  • 0.0 (20)
to
Corner Chamfer
  • 0.0 (20)
to
Corner Chamfer
  • 0.0 (20)
to
Application
Grade Of Cutting Tool
  • WU13PV (20)
Hand Of Tool
  • R (20)
Front-End
Thread Pitch
  • 0.5 (3)
  • 0.7 (1)
  • 0.75 (2)
  • 0.8 (1)
  • 1.0 (4)
  • 1.25 (1)
  • 1.5 (5)
  • 2.0 (2)
  • 2.5 (1)
to
Thread Pitch
  • 0.5 (3)
  • 0.7 (1)
  • 0.75 (2)
  • 0.8 (1)
  • 1.0 (4)
  • 1.25 (1)
  • 1.5 (5)
  • 2.0 (2)
  • 2.5 (1)
to
Back-End
Connection Type
  • CYLINDRICAL (20)
Back-End Diameter
  • 0.1575 (1)
  • 0.2362 (9)
  • 0.315 (2)
  • 0.3937 (3)
  • 0.4724 (3)
  • 0.5512 (2)
to
Back-End Diameter
  • 4.0 (1)
  • 6.0 (9)
  • 8.0 (2)
  • 10.0 (3)
  • 12.0 (3)
  • 14.0 (2)
to
other
Grade
  • WU13PV (20)
Platform
  • GTM11 (4)
Tool Unit
  • M (20)
Over All Length [L]
  • 42.0 (1)
  • 55.0 (6)
  • 63.0 (3)
  • 70.0 (2)
  • 80.0 (3)
  • 90.0 (5)
to
Over All Length [L]
  • 0.1657 (1)
  • 2.1654 (6)
  • 2.4803 (3)
  • 2.7559 (2)
  • 3.1496 (3)
  • 3.5433 (5)
to
obsoleteFacet
  • true (20)
  • false (4)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 20 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TDZ] Thread Diameter Size [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Effective Cutting Edges on Face
4138391 GTM115001 GTM115001 WU13PV M3X0.5 2.4000 .0945 6.2400 .2457 42.0000 .1657 28.0 1.102 4.0 .1575 3
    4138392 GTM115002 GTM115002 WU13PV M4X0.7 3.1500 .1240 8.7300 .3437 55.0000 2.165 36.0 1.417 6.0 .2362 3
      4138493 GTM115003 GTM115003 WU13PV M5X0.8 4.0000 .1575 10.7800 .4244 55.0000 2.165 36.0 1.417 6.0 .2362 3
        4138494 GTM115004 GTM115004 WU13PV M6X1 4.8000 .1890 12.4800 .4913 55.0000 2.165 36.0 1.417 6.0 .2362 3
          4138495 GTM115005 GTM115005 WU13PV M8X1.25 5.9000 .2323 16.8300 .6626 63.0000 2.480 36.0 1.417 6.0 .2362 3
            4138496 GTM115006 GTM115006 WU13PV M10X1.5 7.9000 .3110 20.2400 .7969 70.0000 2.755 36.0 1.417 8.0 .315 3
              4138498 GTM115008 GTM115008 WU13PV M14X2 11.6000 .4567 28.9600 1.140 90.0000 3.543 45.0 1.771 12.0 .4724 4
                4138499 GTM115009 GTM115009 WU13PV M16X2 11.9000 .4685 32.9300 1.296 90.0000 3.543 45.0 1.771 12.0 .4724 4
                  4138500 GTM115010 GTM115010 WU13PV M18X2.5 13.9000 .5472 38.6700 1.522 90.0000 3.543 45.0 1.771 14.0 .5512 4
                    4138502 GTM115012 GTM115012 WU13PV M4X0.5 3.3500 .1319 8.2400 .3244 55.0000 2.165 36.0 1.417 6.0 .2362 3
                      4138503 GTM115013 GTM115013 WU13PV M5X0.5 4.3000 .1693 10.2400 .4031 55.0000 2.165 36.0 1.417 6.0 .2362 3
                        4138504 GTM115014 GTM115014 WU13PV M6X0.75 5.0000 .1969 12.3600 .4866 55.0000 2.165 36.0 1.417 6.0 .2362 3
                          4138505 GTM115015 GTM115015 WU13PV M8X0.75 5.9000 .2323 16.8300 .6626 63.0000 2.480 36.0 1.417 6.0 .2362 3
                            4138506 GTM115016 GTM115016 WU13PV M8X1 5.9000 .2323 16.4400 .6472 63.0000 2.480 36.0 1.417 6.0 .2362 3
                              4138507 GTM115017 GTM115017 WU13PV M10X1 7.9000 .3110 20.4600 .8055 70.0000 2.755 36.0 1.417 8.0 .315 3
                                4138508 GTM115018 GTM115018 WU13PV M12X1 9.9000 .3898 24.4700 .9634 80.0000 3.149 40.0 1.574 10.0 .3937 4
                                  4138509 GTM115019 GTM115019 WU13PV M12X1.5 9.9000 .3898 24.7100 .9728 80.0000 3.149 40.0 1.574 10.0 .3937 4
                                    4138510 GTM115020 GTM115020 WU13PV M14X1.5 9.9000 .3898 29.1600 1.148 80.0000 3.149 40.0 1.574 10.0 .3937 4
                                      4138511 GTM115021 GTM115021 WU13PV M16X1.5 11.9000 .4685 32.1600 1.266 90.0000 3.543 45.0 1.771 12.0 .4724 4
                                        4138513 GTM115023 GTM115023 WU13PV M20X1.5 13.9000 .5472 41.1600 1.620 90.0000 3.543 45.0 1.771 14.0 .5512 4
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor
                                          Qty

                                          Grades

                                          • WU13PV

                                            Coated carbide. PVD carbide substrate with heat-resistant TiAlN coating.
                                            Universal grade for thread milling most materials.

                                            P Steel
                                            M Stainless Steel
                                            K Cast Iron
                                            N Non-Ferrous
                                            S High-Temp Alloys
                                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                          You are about to create a duplicate . Do you want to proceed?
                                          You are about to delete Do you want to proceed?
                                          What would you like to rename your to?
                                          Please enter a valid name
                                          Please enter a name for the duplicate
                                          Please enter a valid name
                                          You are about to add to your My Solutions page. Do you want to proceed?
                                          Please enter a valid name
                                          Send a copy of

                                          Please enter a valid Email
                                          Please enter a valid name

                                          We have found the following CAD Drawings

                                          Select the files you are looking for and download them all at once

                                          You should be logged to see your dashboard information
                                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                          item(s) successfully added to the cart
                                          View Cart