COVID-19: How WIDIA is responding
Cartridge Milling System
Cartridge Milling System
Cartridge Milling System
Cartridge Milling System

Face Mills • M4000 Series • Cartridge Milling System • Metric

Cartridge Milling System

Uses and application

  • Milling - Side and FaceMilling - Side and Face
  • Face MillingFace Milling

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (26)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (26)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (26)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (26)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (26)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (26)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (26)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (26)
  • M Stainless Steel (26)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (26)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (26)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (26)
  • K Cast Iron (26)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (26)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (26)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (26)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum
      (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (22)
  • S High-Temp Alloys (21)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (21)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (21)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (21)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (21)
  • H Hardened Materials (18)
    • H1
      Hardened Materials 44-48 HRC
      (18)
    • H2
      Hardened Materials 48-55 HRC
      (7)
    • H3
      Hardened Materials 56-60 HRC
      (7)
Applications
  • Face Milling Face Milling (27)
  • Shoulder Milling Shoulder Milling (1)
Cutting Length
  • 0.04 (2)
  • 0.087 (1)
  • 0.138 (1)
  • 0.1712 (1)
  • 0.186 (1)
  • 0.1889 (1)
  • 0.236 (1)
  • 0.315 (1)
  • 0.3543 (1)
  • 0.387 (1)
  • 0.394 (1)
  • 0.401 (1)
  • 0.453 (1)
  • 0.459 (1)
  • 0.549 (1)
  • 0.5866 (1)
  • 0.621 (1)
  • 0.625 (1)
  • 2.4803 (1)
to
Cutting Length
  • 1.01 (1)
  • 1.016 (1)
  • 2.2 (1)
  • 3.505 (1)
  • 4.35 (1)
  • 4.7 (1)
  • 4.8 (1)
  • 6.0 (3)
  • 6.3 (1)
  • 8.0 (3)
  • 9.0 (2)
  • 9.8 (1)
  • 10.0 (1)
  • 10.19 (1)
  • 11.5 (1)
  • 11.66 (1)
  • 12.0 (2)
  • 14.0 (2)
  • 14.9 (1)
  • 15.0 (1)
  • 15.9 (1)
  • 18.0 (1)
to
Tool Cutting Edge Angle
  • 32.0 (2)
  • 45.0 (7)
  • 58.0 (1)
  • 75.0 (5)
  • 88.85 (1)
  • 89.14 (1)
  • 90.0 (11)
to
Corner configuration
Corner Radius
  • 0.0 (9)
  • 0.2 (1)
  • 0.39 (1)
  • 0.4 (5)
  • 0.78 (1)
  • 0.79 (2)
  • 0.8 (7)
  • 0.978 (1)
  • 0.979 (1)
  • 0.982 (1)
  • 1.2 (13)
  • 1.3 (2)
  • 1.59 (2)
  • 1.6 (9)
  • 1.67 (1)
  • 2.0 (4)
  • 2.38 (1)
  • 2.4 (3)
  • 2.5 (1)
  • 3.1 (1)
  • 3.17 (1)
  • 3.175 (1)
  • 3.18 (1)
  • 3.2 (6)
  • 3.21 (1)
  • 4.0 (2)
  • 4.35 (3)
  • 6.0 (1)
  • 8.0 (1)
  • 50.0 (1)
to
Corner Radius
  • 0.0 (9)
  • 0.008 (1)
  • 0.015 (1)
  • 0.0156 (1)
  • 0.0157 (2)
  • 0.016 (4)
  • 0.031 (5)
  • 0.0313 (2)
  • 0.0314 (1)
  • 0.0315 (1)
  • 0.0319 (1)
  • 0.032 (2)
  • 0.0385 (1)
  • 0.0387 (1)
  • 0.0469 (9)
  • 0.047 (7)
  • 0.0472 (3)
  • 0.048 (1)
  • 0.051 (1)
  • 0.0512 (1)
  • 0.062 (4)
  • 0.0625 (3)
  • 0.063 (5)
  • 0.0657 (1)
  • 0.078 (1)
  • 0.0781 (1)
  • 0.079 (2)
  • 0.094 (3)
  • 0.095 (2)
  • 0.0984 (1)
  • 0.122 (1)
  • 0.125 (4)
  • 0.126 (4)
  • 0.1264 (1)
  • 0.1563 (1)
  • 0.157 (1)
  • 0.1574 (1)
  • 0.1713 (3)
  • 0.235 (1)
  • 0.315 (1)
  • 1.9685 (1)
to
Corner Chamfer
  • 0.026 (1)
  • 0.027 (1)
  • 0.039 (1)
  • 0.0394 (1)
  • 0.04 (1)
  • 0.0405 (1)
  • 0.0546 (1)
  • 0.0584 (1)
  • 0.0595 (1)
to
Corner Chamfer
  • 0.66 (1)
  • 0.69 (1)
  • 1.0 (1)
  • 1.02 (1)
  • 1.029 (1)
  • 1.39 (1)
  • 1.483 (1)
  • 1.484 (1)
  • 1.511 (1)
to
Application
Grade Of Cutting Tool
  • THM (12)
  • THM-U (6)
  • THR (3)
  • TN2510 (7)
  • TN25M (11)
  • TN450 (13)
  • TN5015 (1)
  • TN5020 (1)
  • TN5505 (1)
  • TN5515 (20)
  • TN6501 (5)
  • TN6502 (1)
  • TN6505 (3)
  • TN6510 (7)
  • TN6520 (10)
  • TN6525 (13)
  • TN6540 (16)
  • TN7015 (1)
  • TN7035 (1)
  • TN7110 (1)
  • TN7135 (1)
  • TN7525 (14)
  • TN7535 (20)
  • TTI25 (12)
  • TTM (4)
  • TTM08 (11)
  • TTR (7)
  • WDN10U (1)
  • WK15CM (24)
  • WK15PM (4)
  • WK25YM (3)
  • WN10HM (2)
  • WN25PM (5)
  • WP25PM (14)
  • WP35CM (21)
  • WP40PM (15)
  • WS30PM (11)
  • WS40PM (13)
  • WU10PM (2)
  • WU20PM (6)
  • WU35PM (4)
Front-End
Clamp Style
  • C (8)
  • S (21)
Insert Shape
  • A-PARALLELOGRAM 85 (1)
  • A-PARALLELOGRAM 90 (1)
  • H-HEXAGON 120 (7)
  • R-ROUND (1)
  • S-SQUARE 90 (10)
  • T-TRIANGLE 60 (2)
  • X-PARALLELOGRAM 75 (2)
  • X-PARALLELOGRAM 80 (1)
  • X-RECTANGLE MILL 4 90 (3)
Cartridge Size
  • 15 - mm of Shank Height M400 (29)
Insert Geometry
Cutting Tool Material
  • C N (3)
  • D P (1)
  • H T (12)
  • H W (26)
other
Platform
  • M4000 Series (26)
Tool Unit
  • M (29)
Over All Length [L]
  • 47.0 (19)
  • 47.01 (1)
  • 47.02 (1)
  • 47.09 (4)
  • 47.1 (4)
to
Over All Length [L]
  • 1.85 (2)
  • 1.8504 (17)
  • 1.851 (1)
  • 1.8512 (1)
  • 1.854 (6)
  • 1.8543 (2)
to
Insert Hand
  • N (11)
  • R (16)
obsoleteFacet
  • true (29)
  • false (24)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 29 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number MAR_MILLING_GAGE_INSERT1 MAR_MILLING_MASTER_PLATFORM [APMAX] Maximum Depth of Cut [APMAX] Maximum Depth of Cut
4159022 M4000CA-AD1505 M4000CA-AD1505 AD.T1505 CIP 14.0000 .5490
    4159020 M4000CA-AP1003 M4000CA-AP1003 AP.T1003 CIP 10.1900 .4010
      3968124 M4000CA-HN07 M4000CA-HN07 HN.J0704/XNGJ0704 M1200 Mini 3.5050 .1380
        4159018 M4000CA-HN07HD M4000CA-HN07HD HN.J0704 M1200 Mini 4.7000 .1860
          4159017 M4000CA-HN07HF M4000CA-HN07HF HN.J0704 M1200 Mini 1.0100 .0400
            3126691 M4000CA-HN09 M4000CA-HN09 HN.J0905/XNGJ0905 M1200 4.3500 .1712
              4159019 M4000CA-HN09HD M4000CA-HN09HD HN.J0905 M1200 6.0000 .2360
                3954792 M4000CA-HN09HF M4000CA-HN09HF HN.J0905 M1200 2.2000 .0870
                  2511344 M4000CA-HP06 M4000CA-HP06 HP.T06T3 M640 4.8000 .1889
                    2067492 M4000CA-SD1204 M4000CA-SD1204 SDM.1204 M690 11.6600 .4590
                      2006346 M4000CA-RC1606 M4000CA-RC1606 RC.T1606 M100 8.0000 .3150
                        2006347 M4000CA-XP16 M4000CA-XP16 XP.T1604 M680 14.0000  
                          2006348 M4000CA-SN12 M4000CA-SN12 SN.T1205/XNKT1205 M660 6.3000 2.480
                            2006359 M4000CA-SD1506 M4000CA-SD1506 SDM.1506 M690 14.9000 .5866
                              2006360 M4000CA-SN15 M4000CA-SN15 SN.T1505 M660 8.0000  
                                2006361 M4000CA-MDHX10 M4000CA-MDHX10 MDHX1004 M76 1.0160 .0400
                                  2006362 M4000CA-SP12 M4000CA-SP12 121358680 M40Wiper 9.0000 .3543
                                    2006373 M4000CA-SP1203 M4000CA-SP1203 SP.N1203/SP.R1203 M40 9.0000  
                                      2006374 M4000CA-SE1203 M4000CA-SE1203 SE.N1203/SE.R1203 M68 6.0000  
                                        2006376 M4000CA-SP1504 M4000CA-SP1504 SP.N1504 M40 12.0000  
                                          2006377 M4000CA-SE1504 M4000CA-SE1504 SE.N1504/SE.R1504 M68 8.0000  
                                            2006379 M4000CA-TP2204 M4000CA-TP2204 TP.N2204/TP.R2204 M40 18.0000  
                                              2033495 M4000CA-SE1204 M4000CA-SE1204 SE.N1204/SE.R1204 M68 6.0000  
                                                2033496 M4000CA-TP1603 M4000CA-TP1603 TP.N1603/TP.R1603 M40 12.0000  
                                                  6152926 M4000CA-XDPT11 M4000CA-XDPT11     11.5000 .4530
                                                    6152927 M4000CA-XDPT17 M4000CA-XDPT17     15.9000 .6250
                                                      6357989 M4000CA-XN15 M4000CA-XN15     15.0000 .6210
                                                        6433216 M4000CA-XN10 M4000CA-XN10     10.0000 .3940
                                                          6602179 M4000CA-SNHX12 M4000CA-SNHX12     9.8000 .3870
                                                            List price:
                                                            Discount: %
                                                            Your price::
                                                            Replacement This item is not available
                                                            Replacement Product This item may be available through a distributor
                                                            Qty
                                                            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                            You are about to create a duplicate . Do you want to proceed?
                                                            You are about to delete Do you want to proceed?
                                                            What would you like to rename your to?
                                                            Please enter a valid name
                                                            Please enter a name for the duplicate
                                                            Please enter a valid name
                                                            You are about to add to your My Solutions page. Do you want to proceed?
                                                            Please enter a valid name
                                                            Send a copy of

                                                            Please enter a valid Email
                                                            Please enter a valid name

                                                            We have found the following CAD Drawings

                                                            Select the files you are looking for and download them all at once

                                                            You should be logged to see your dashboard information
                                                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                            item(s) successfully added to the cart
                                                            View Cart