COVID-19: How WIDIA is responding
eBore™ • Twin Cutter • KM • Insert Holder
eBore™ • Twin Cutter • KM • Insert Holder
eBore™ • Twin Cutter • KM • Insert Holder
eBore™ • Twin Cutter • KM • Insert Holder

eBore™ • Twin Cutter • Insert Holder

eBore™ • Twin Cutter • KM • Insert Holder

Features and benefits

Note: Order 2 insert holders for complete assembly as shown on the image.

Uses and application

  • Reaming: Through HoleReaming: Through Hole
  • Reaming: Blind HoleReaming: Blind Hole
  • Reaming: Through & Cross HolesReaming: Through & Cross Holes
  • Reaming: Blind & CrossReaming: Blind & Cross
  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (9)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (9)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (9)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (9)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (9)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (9)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (9)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (9)
  • M Stainless Steel (9)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (9)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (9)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (9)
  • K Cast Iron (9)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9)
  • N Non-Ferrous Materials (9)
    • N1
      Wrought Aluminum
      (9)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (9)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (9)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (9)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (9)
    • N6
      Carbon, Graphite Composites, CFRP
      (9)
    • N7
      MMC's
      (9)
  • S High-Temp Alloys (9)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (9)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (9)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (9)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (9)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC
      (9)
    • H2
      Hardened Materials 48-55 HRC
      (9)
    • H3
      Hardened Materials 56-60 HRC
      (9)
    • H4
      Hardened Materials >60 HRC
      (9)
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (9)
  • Blind Hole Finishing Blind Hole Finishing (9)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (9)
  • Through Hole Finishing Through Hole Finishing (9)
Cutting Condition
  • Heavily Interrupted Cut (9)
  • Lightly Interrupted Cut (9)
  • Smooth Cut (9)
  • Varying Depth of Cut (9)
Tool Cutting Edge Angle
  • 90.0 (9)
to
Corner configuration
Corner Radius
  • 0.038 (2)
  • 0.1 (9)
  • 0.2 (9)
  • 0.203 (2)
  • 0.397 (2)
  • 0.4 (9)
  • 0.794 (9)
  • 0.8 (9)
  • 1.2 (9)
  • 1.6 (2)
to
Corner Radius
  • 0.0015 (2)
  • 0.004 (9)
  • 0.008 (9)
  • 0.0156 (9)
  • 0.0158 (7)
  • 0.016 (7)
  • 0.0312 (9)
  • 0.0313 (9)
  • 0.0315 (9)
  • 0.0469 (9)
  • 0.047 (7)
  • 0.0625 (2)
to
Application
Grade Of Cutting Tool
  • HCK10 (9)
  • HK1500 (2)
  • HK35 (7)
  • HT2 (9)
  • HTX (9)
  • HWK15 (9)
  • K10M (7)
  • K10P (7)
  • K10U (2)
  • K15U (2)
  • K20K (7)
  • K313 (9)
  • K68 (9)
  • KB1345 (9)
  • KB1610 (2)
  • KB1630 (9)
  • KB5610 (2)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (2)
  • KBH10 (2)
  • KBH20 (9)
  • KC5010 (9)
  • KC5025 (9)
  • KC5410 (9)
  • KC720 (9)
  • KC730 (9)
  • KC732 (9)
  • KC8050 (9)
  • KC810 (9)
  • KC850 (9)
  • KC9010 (2)
  • KC9025 (9)
  • KC910 (9)
  • KC9105 (9)
  • KC9110 (9)
  • KC9120 (2)
  • KC9125 (9)
  • KC9225 (9)
  • KC9240 (9)
  • KC9240NEW (9)
  • KC9315 (9)
  • KC9320 (9)
  • KC9325 (9)
  • KC935 (9)
  • KC950 (2)
  • KC990 (2)
  • KCD25 (9)
  • KCK05 (9)
  • KCK05B (2)
  • KCK15 (9)
  • KCK15B (9)
  • KCK20 (9)
  • KCK20B (9)
  • KCM15 (9)
  • KCM15B (9)
  • KCM25 (9)
  • KCM25B (9)
  • KCM35 (9)
  • KCM35B (2)
  • KCP05 (9)
  • KCP05B (2)
  • KCP10 (9)
  • KCP10B (9)
  • KCP25 (9)
  • KCP25B (9)
  • KCP30 (9)
  • KCP30B (9)
  • KCS10 (9)
  • KCS10B (9)
  • KCU10 (9)
  • KCU25 (9)
  • KD050 (2)
  • KD081 (2)
  • KD1400 (2)
  • KD1425 (2)
  • KT175 (2)
  • KT315 (9)
  • KT325 (9)
  • KTP10 (2)
  • KU10 (2)
  • KU10T (9)
  • KU30T (9)
  • NL300 (7)
  • NL920 (7)
  • PB170 (7)
  • PB250 (7)
  • PD100 (9)
  • PD50 (7)
  • SP0PW3 (7)
  • SP4019 (7)
  • SPN3W1 (2)
  • THM (9)
  • THM-X (9)
  • TN10P (9)
  • TN10U (9)
  • TN15M (9)
  • TN15U (2)
  • TN2000 (9)
  • TN20K (9)
  • TN20P (9)
  • TN30M (9)
  • TN4000 (2)
  • TN5015 (9)
  • TN5020 (9)
  • TN5105 (9)
  • TN5120 (9)
  • TN6010 (9)
  • TN6025 (2)
  • TN7005 (2)
  • TN7010 (9)
  • TN7015 (9)
  • TN7025 (9)
  • TN7035 (9)
  • TN7105 (9)
  • TN7110 (9)
  • TN7115 (9)
  • TN7125 (9)
  • TN7135 (9)
  • TN8025 (9)
  • TTI15 (2)
  • TTM (2)
  • TTR (9)
  • TTS (2)
  • TTX (2)
  • W00342 (7)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH25P (2)
  • WBH30P (2)
  • WBK45U (9)
  • WDN00U (2)
  • WDN25U (2)
  • WK05CT (9)
  • WK15CT (9)
  • WK20CT (9)
  • WM15CT (9)
  • WM25CT (9)
  • WP15CT (9)
  • WP25CT (9)
  • WP35CT (9)
  • WS10PT (9)
  • WS25PT (2)
  • WU10HT (9)
Minimum Axial Groove Diameter
  • 1.1417 (1)
  • 1.4173 (1)
  • 1.6929 (1)
  • 2.0866 (1)
  • 2.5591 (1)
  • 3.2283 (1)
  • 3.937 (1)
  • 4.9213 (1)
  • 5.9055 (1)
to
Minimum Axial Groove Diameter
  • 29.0 (1)
  • 36.0 (1)
  • 43.0 (1)
  • 53.0 (1)
  • 65.0 (1)
  • 82.0 (1)
  • 100.0 (1)
  • 125.0 (1)
  • 150.0 (1)
to
Maximum Axial Groove Diameter
  • 37.0 (1)
  • 44.0 (1)
  • 54.0 (1)
  • 66.0 (1)
  • 83.0 (1)
  • 103.0 (1)
  • 130.0 (1)
  • 205.0 (2)
to
Maximum Axial Groove Diameter
  • 1.4567 (1)
  • 1.7323 (1)
  • 2.126 (1)
  • 2.5984 (1)
  • 3.2677 (1)
  • 4.0551 (1)
  • 5.1181 (1)
  • 8.0709 (2)
to
Front-End
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (9)
Insert Geometry
Cutting Tool Material
  • B H (9)
  • B L (9)
  • C N (2)
  • D P (9)
  • H T (9)
  • H W (9)
other
Platform
  • eBore (8)
Tool Unit
  • M (9)
Over All Length [L]
  • 14.55 (1)
  • 14.6 (1)
  • 20.6 (1)
  • 20.7 (2)
  • 30.7 (4)
to
Over All Length [L]
  • 0.5728 (2)
  • 0.8091 (1)
  • 0.8139 (2)
  • 1.2076 (4)
to
Insert Hand
  • N (9)
  • R (9)
obsoleteFacet
  • false (9)
  • true (9)
Cutting Condition Material
  • H-All (9)
  • K-All (9)
  • M-All (9)
  • N-All (9)
  • P-All (9)
  • S-All (9)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 9 of 9 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter
6655246 IHTC029CC09 IHTC029CC09 29.0000 1.141 37.0000 1.456
    6655248 IHTC036CC09 IHTC036CC09 36.0000 1.417 44.0000 1.732
      6655250 IHTC043CC12 IHTC043CC12 43.0000 1.692 54.0000 2.126
        6655272 IHTC053CC12 IHTC053CC12 53.0000 2.086 66.0000 2.598
          6655274 IHTC065CC12 IHTC065CC12 65.0000 2.559 83.0000 3.267
            6655276 IHTC082CC12 IHTC082CC12 82.0000 3.228 103.0000 4.055
              6655278 IHTC100CC12 IHTC100CC12 100.0000 3.937 130.0000 5.118
                6655279 IHTC125CC12 IHTC125CC12 125.0000 4.921 205.0000 8.070
                  6655281 IHTC150CC12 IHTC150CC12 150.0000 5.905 205.0000 8.070
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty
                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                    You are about to create a duplicate . Do you want to proceed?
                    You are about to delete Do you want to proceed?
                    What would you like to rename your to?
                    Please enter a valid name
                    Please enter a name for the duplicate
                    Please enter a valid name
                    You are about to add to your My Solutions page. Do you want to proceed?
                    Please enter a valid name
                    Send a copy of

                    Please enter a valid Email
                    Please enter a valid name

                    We have found the following CAD Drawings

                    Select the files you are looking for and download them all at once

                    You should be logged to see your dashboard information
                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                    item(s) successfully added to the cart
                    View Cart