successfully added to cart
View Cart

Top Thread™ y Top Groove™

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Grooving Grooving (9)
  • ID Facing ID Facing (9)
  • ID Grooving ID Grooving (9)
  • ID Thread Turning ID Thread Turning (9)
  • Multiple Direction Cutting Multiple Direction Cutting (9)
  • TRN Boring TRN Boring (9)
  • Turning Turning (9)
Workpiece Material
  • P Steel (13)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (13)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (13)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (13)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (13)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (13)
  • M Stainless Steel (13)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (13)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (13)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (13)
  • K Cast Iron (13)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (13)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (13)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (13)
  • N Non-Ferrous Materials (13)
    • N1
      Wrought Aluminum
      (13)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (13)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (13)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (13)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (13)
    • N6
      Carbon, Graphite Composites, CFRP
      (13)
    • N7
      MMC's
      (13)
  • S High-Temp Alloys (13)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (13)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (13)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (13)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (13)
  • H Hardened Materials (13)
    • H1
      Hardened Materials 44-48 HRC
      (13)
    • H2
      Hardened Materials 48-55 HRC
      (13)
    • H3
      Hardened Materials 56-60 HRC
      (11)
    • H4
      Hardened Materials >60 HRC
      (11)
Type of Thread
  • 60 (13)
  • ACME (11)
  • API (11)
  • API RD (8)
  • BSW (8)
  • BUTTRESS (13)
  • M (9)
  • NPT (8)
  • STUB ACME (8)
  • UN (13)
  • UNJ (8)
Cutting Condition
  • Heavily Interrupted Cut (13)
  • Lightly Interrupted Cut (13)
  • Smooth Cut (13)
  • Varying Depth of Cut (13)
Cutting Condition Material
  • H-All (13)
  • K-All (13)
  • M-All (13)
  • N-All (13)
  • P-All (13)
  • S-All (13)
Cutting Edges Per Insert
  • 1.0 (13)
  • 2.0 (13)
to
cornerConfiguration
Corner Radius
  • 0.051 (4)
  • 0.057 (4)
  • 0.066 (8)
  • 0.076 (13)
  • 0.08 (10)
  • 0.089 (2)
  • 0.09 (2)
  • 0.094 (8)
  • 0.097 (4)
  • 0.1 (10)
  • 0.102 (10)
  • 0.116 (4)
  • 0.117 (4)
  • 0.127 (8)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.15 (8)
  • 0.155 (8)
  • 0.157 (8)
  • 0.16 (3)
  • 0.165 (11)
  • 0.173 (8)
  • 0.178 (8)
  • 0.185 (1)
  • 0.19 (13)
  • 0.191 (13)
  • 0.198 (8)
  • 0.2 (8)
  • 0.202 (9)
  • 0.224 (8)
  • 0.235 (8)
  • 0.244 (4)
  • 0.25 (9)
  • 0.251 (8)
  • 0.254 (12)
  • 0.269 (8)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (8)
  • 0.315 (10)
  • 0.318 (11)
  • 0.33 (8)
  • 0.34 (8)
  • 0.343 (3)
  • 0.356 (8)
  • 0.404 (8)
  • 0.406 (8)
  • 0.43 (8)
  • 0.445 (11)
  • 0.472 (4)
  • 0.49 (8)
  • 0.5 (2)
  • 0.508 (8)
  • 0.565 (2)
  • 0.57 (4)
  • 0.572 (11)
  • 0.575 (7)
  • 0.75 (2)
  • 0.787 (10)
  • 0.902 (11)
  • 1.0 (10)
  • 1.194 (10)
  • 1.195 (4)
  • 1.25 (10)
  • 1.5 (10)
  • 1.585 (8)
  • 1.588 (13)
  • 1.59 (2)
  • 1.75 (10)
  • 1.98 (4)
  • 1.981 (8)
  • 2.0 (11)
  • 2.25 (11)
  • 2.388 (11)
  • 2.39 (1)
  • 2.5 (3)
  • 3.175 (3)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (4)
  • 0.0023 (4)
  • 0.0026 (8)
  • 0.003 (13)
  • 0.0031 (10)
  • 0.0035 (2)
  • 0.0037 (8)
  • 0.0038 (4)
  • 0.004 (10)
  • 0.0046 (8)
  • 0.005 (8)
  • 0.0052 (8)
  • 0.0053 (8)
  • 0.0059 (8)
  • 0.006 (8)
  • 0.0062 (8)
  • 0.0065 (11)
  • 0.0068 (8)
  • 0.007 (8)
  • 0.0075 (13)
  • 0.0078 (8)
  • 0.0079 (4)
  • 0.008 (9)
  • 0.0088 (8)
  • 0.0093 (8)
  • 0.0096 (4)
  • 0.0099 (8)
  • 0.01 (12)
  • 0.0106 (8)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (8)
  • 0.0124 (8)
  • 0.0125 (11)
  • 0.013 (8)
  • 0.0135 (11)
  • 0.014 (8)
  • 0.0159 (8)
  • 0.016 (8)
  • 0.017 (8)
  • 0.0175 (11)
  • 0.0186 (4)
  • 0.0193 (8)
  • 0.0197 (2)
  • 0.02 (8)
  • 0.0225 (11)
  • 0.0295 (2)
  • 0.031 (10)
  • 0.0355 (11)
  • 0.0394 (10)
  • 0.047 (10)
  • 0.0492 (10)
  • 0.0591 (10)
  • 0.0625 (13)
  • 0.0689 (10)
  • 0.078 (8)
  • 0.0787 (11)
  • 0.0886 (11)
  • 0.094 (11)
  • 0.0984 (3)
  • 0.106 (4)
  • 0.125 (3)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (10)
  • K313 (13)
  • K420 (13)
  • K4H (9)
  • K68 (13)
  • KB1345 (11)
  • KB1630 (11)
  • KB5625 (8)
  • KC250 (10)
  • KC5010 (13)
  • KC5025 (13)
  • KC5410 (13)
  • KC710 (13)
  • KC720 (13)
  • KC722 (13)
  • KC730 (13)
  • KC732 (8)
  • KC810 (13)
  • KC850 (13)
  • KC910 (9)
  • KC9110 (13)
  • KC9120 (8)
  • KC9320 (13)
  • KC935 (13)
  • KC950 (13)
  • KCK20 (12)
  • KCK20B (13)
  • KCP10B (13)
  • KCP25B (13)
  • KCU10 (13)
  • KCU25 (13)
  • KD050 (4)
  • KD081 (8)
  • KD100 (10)
  • KD120 (11)
  • KD1425 (8)
  • KT175 (10)
  • KT315 (13)
  • KU10T (13)
  • KU25T (13)
  • KU30T (13)
  • KY3000 (11)
  • THM (10)
  • TN10P (11)
  • TN6010 (13)
  • TN6025 (13)
  • TN7110 (13)
  • WU10HT (4)
  • WU10PT (4)
  • WU25PT (4)
Hand Of Tool
  • L (6)
  • R (7)
Minimum Axial Groove Diameter
  • 0.9449 (1)
  • 0.9646 (1)
  • 1.3386 (2)
  • 1.5157 (2)
  • 1.5748 (2)
  • 1.8898 (3)
  • 1.9094 (2)
to
Minimum Axial Groove Diameter
  • 24.0 (1)
  • 24.5 (1)
  • 34.0 (2)
  • 38.5 (2)
  • 40.0 (2)
  • 48.0 (3)
  • 48.5 (2)
to
Rake Angle Style
  • NEUTRAL (ZERO) (4)
Maximum Bore Depth
  • 62.0 (2)
  • 63.8 (2)
  • 80.0 (1)
  • 83.29 (2)
  • 99.32 (2)
  • 105.6 (2)
  • 111.0 (1)
  • 111.02 (1)
to
Maximum Bore Depth
  • 2.4409 (2)
  • 2.5118 (2)
  • 3.1496 (1)
  • 3.279 (2)
  • 3.91 (2)
  • 4.1575 (2)
  • 4.3701 (1)
  • 4.3709 (1)
to
frontEnd
Cutting Width
  • 0.5 (2)
  • 0.787 (2)
  • 0.8 (2)
  • 0.889 (2)
  • 0.991 (2)
  • 1.0 (10)
  • 1.041 (2)
  • 1.19 (6)
  • 1.194 (10)
  • 1.199 (1)
  • 1.2 (10)
  • 1.39 (2)
  • 1.397 (2)
  • 1.4 (2)
  • 1.473 (2)
  • 1.5 (10)
  • 1.56 (1)
  • 1.57 (9)
  • 1.575 (10)
  • 1.69 (2)
  • 1.7 (2)
  • 1.702 (2)
  • 1.75 (10)
  • 1.829 (8)
  • 1.94 (2)
  • 1.95 (2)
  • 1.956 (2)
  • 1.981 (8)
  • 2.0 (10)
  • 2.007 (2)
  • 2.2 (10)
  • 2.235 (10)
  • 2.24 (6)
  • 2.25 (6)
  • 2.388 (10)
  • 2.39 (4)
  • 2.464 (8)
  • 2.5 (10)
  • 2.667 (8)
  • 2.74 (2)
  • 2.743 (10)
  • 2.75 (10)
  • 2.794 (8)
  • 2.997 (10)
  • 3.0 (13)
  • 3.099 (8)
  • 3.17 (8)
  • 3.175 (13)
  • 3.18 (3)
  • 3.2 (13)
  • 3.245 (2)
  • 3.25 (8)
  • 3.251 (10)
  • 3.27 (2)
  • 3.32 (4)
  • 3.329 (4)
  • 3.5 (13)
  • 3.607 (8)
  • 3.73 (1)
  • 3.81 (2)
  • 3.84 (2)
  • 3.96 (8)
  • 3.962 (8)
  • 3.974 (4)
  • 3.988 (8)
  • 4.0 (11)
  • 4.24 (4)
  • 4.242 (11)
  • 4.25 (4)
  • 4.3 (8)
  • 4.5 (11)
  • 4.521 (8)
  • 4.699 (9)
  • 4.775 (11)
  • 4.78 (1)
  • 4.785 (1)
  • 4.788 (2)
  • 4.8 (8)
  • 4.801 (11)
  • 4.81 (8)
  • 4.88 (4)
  • 4.95 (8)
  • 5.0 (3)
  • 5.004 (3)
  • 5.131 (3)
  • 5.41 (3)
  • 5.5 (3)
  • 5.563 (3)
  • 6.0 (3)
  • 6.35 (3)
  • 6.36 (2)
  • 6.48 (3)
to
Cutting Width
  • 0.0197 (2)
  • 0.031 (2)
  • 0.0315 (2)
  • 0.035 (2)
  • 0.039 (2)
  • 0.0394 (10)
  • 0.041 (2)
  • 0.047 (10)
  • 0.0472 (10)
  • 0.055 (2)
  • 0.0551 (2)
  • 0.058 (2)
  • 0.0591 (10)
  • 0.062 (10)
  • 0.0669 (2)
  • 0.067 (2)
  • 0.0689 (10)
  • 0.072 (8)
  • 0.076 (2)
  • 0.0768 (2)
  • 0.077 (2)
  • 0.078 (8)
  • 0.0787 (10)
  • 0.079 (6)
  • 0.0866 (10)
  • 0.088 (10)
  • 0.0886 (6)
  • 0.094 (10)
  • 0.097 (8)
  • 0.0984 (10)
  • 0.105 (8)
  • 0.108 (10)
  • 0.1083 (10)
  • 0.11 (8)
  • 0.118 (10)
  • 0.1181 (13)
  • 0.122 (8)
  • 0.125 (13)
  • 0.126 (13)
  • 0.1278 (2)
  • 0.128 (10)
  • 0.129 (2)
  • 0.131 (4)
  • 0.1378 (13)
  • 0.142 (8)
  • 0.147 (1)
  • 0.15 (2)
  • 0.151 (2)
  • 0.156 (8)
  • 0.157 (8)
  • 0.1574 (11)
  • 0.1575 (11)
  • 0.167 (11)
  • 0.1673 (4)
  • 0.169 (8)
  • 0.1771 (11)
  • 0.1772 (11)
  • 0.178 (8)
  • 0.185 (9)
  • 0.188 (11)
  • 0.189 (11)
  • 0.192 (4)
  • 0.195 (8)
  • 0.1969 (3)
  • 0.197 (3)
  • 0.202 (3)
  • 0.213 (3)
  • 0.2165 (3)
  • 0.2166 (2)
  • 0.219 (3)
  • 0.2362 (3)
  • 0.25 (3)
  • 0.255 (3)
to
Insert Size
  • 2 (2)
  • 3 (8)
  • 4 (3)
Maximum Cutting Depth
  • 3.51 (2)
  • 5.33 (8)
  • 7.47 (3)
to
Maximum Cutting Depth
  • 0.1382 (2)
  • 0.2098 (4)
  • 0.21 (4)
  • 0.2941 (3)
to
insertGeometry
Cutting Tool Material
  • B H (11)
  • B L (8)
  • C N (11)
  • D P (10)
  • H T (13)
  • H W (13)
backEnd
System Size
  • PSC63 (4)
other
Over All Length [L]
  • 90.0 (2)
  • 100.0 (2)
  • 110.0 (3)
  • 125.0 (2)
  • 140.0 (4)
to
Over All Length [L]
  • 3.5433 (2)
  • 3.937 (2)
  • 4.3307 (3)
  • 4.9213 (2)
  • 5.5118 (4)
to
Insert Hand
  • L (7)
  • R (6)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

PSC63

Internal Cutting Units • Threading and Grooving
(13 Products)
  • Shank - PSCShank - PSC
  • Especificaciones del fabricante: ISO 26623Especificaciones del fabricante: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
4096060 PSC63S25JNER3 PSC63S25JNER3 25.0000 .9840 110.0000 4.330 83.2900 3.279 17.0000 .6693 34.0000 1.338 NG3L 1.10
    List price:
    $573.12 /each.
    Your price::
    Qty
    4096061 PSC63S25JNEL3 PSC63S25JNEL3 25.0000 .9840 110.0000 4.330 83.2900 3.279 17.0000 .6693 34.0000 1.338 NG3R 1.10
      List price:
      $573.12 /each.
      Your price::
      Qty
      4096062 PSC63S32KNER3 PSC63S32KNER3 32.0000 1.260 125.0000 4.921 99.3200 3.910 22.0000 .8661 40.0000 1.574 NG3L 1.34
        List price:
        $769.49 /each.
        Your price::
        Qty
        4096073 PSC63S32KNEL3 PSC63S32KNEL3 32.0000 1.260 125.0000 4.921 99.3200 3.910 22.0000 .8661 40.0000 1.574 NG3R 1.34
          List price:
          $628.45 /each.
          Your price::
          Qty
          6348945 PSC63S40LNER4 PSC63S40LNER4 40.0000 1.574 140.0000 5.511 111.0000 4.370 27.0000 1.063 48.0000 1.889 NG4L 1.79
            List price:
            $605.86 /each.
            Your price::
            Qty
            6348912 PSC63S40LNER3 PSC63S40LNER3 40.0000 1.574 140.0000 5.511 105.6000 4.157 27.0000 1.063 48.0000 1.889 NG3L 1.84
              List price:
              $608.24 /each.
              Your price::
              Qty
              6348943 PSC63S40LNEL3 PSC63S40LNEL3 40.0000 1.574 140.0000 5.511 105.6000 4.157 27.0000 1.063 48.5000 1.909 NG3R 1.84
                List price:
                $622.93 /each.
                Your price::
                Qty
                6348913 PSC63S32GNER3 PSC63S32GNER3 32.0000 1.259 90.0000 3.543 62.0000 2.440 22.0000 .8661 38.5000 1.515 NG3L 1.11
                  List price:
                  $616.84 /each.
                  Your price::
                  Qty
                  6348914 PSC63S40JNER4 PSC63S40JNER4 40.0000 1.574 110.0000 4.330 80.0000 3.149 27.0000 1.063 48.0000 1.889 NG4L 1.50
                    List price:
                    $616.84 /each.
                    Your price::
                    Qty
                    6348915 PSC63S32GNEL3 PSC63S32GNEL3 32.0000 1.259 90.0000 3.543 62.0000 2.440 22.0000 .8661 38.5000 1.515 NG3R 1.11
                      List price:
                      $616.84 /each.
                      Your price::
                      Qty
                      6348920 PSC63S20HNEL2 PSC63S20HNEL2 20.0000 .7874 100.0000 3.937 63.8000 2.511 13.0000 .5118 24.5000 .9646 NG2R 1.01
                        List price:
                        $618.66 /each.
                        Your price::
                        Qty
                        6348944 PSC63S40LNEL4 PSC63S40LNEL4 40.0000 1.574 140.0000 5.511 111.0200 4.370 27.0000 1.063 48.5000 1.909 NG4R 1.78
                          List price:
                          $607.57 /each.
                          Your price::
                          Qty
                          6348916 PSC63S20HNER2 PSC63S20HNER2 20.0000 .7874 100.0000 3.937 63.8000 2.511 13.0000 .5118 24.0000 .9449 NG2L 1.01
                            List price:
                            $592.21 /each.
                            Your price::
                            Qty
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            Qty

                            Sold in pkg. of