successfully added to cart
View Cart

Top Thread™ y Top Groove™

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Multiple Direction Cutting Multiple Direction Cutting (1)
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
    • N6
      Carbon, Graphite Composites, CFRP
      (8)
    • N7
      MMC's
      (8)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Type of Thread
  • 60 (8)
  • ACME (8)
  • API (8)
  • API RD (4)
  • BSW (4)
  • BUTTRESS (8)
  • M (4)
  • NPT (4)
  • STUB ACME (4)
  • UN (8)
  • UNJ (4)
Cutting Condition
  • Heavily Interrupted Cut (8)
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Cutting Condition Material
  • H-All (8)
  • K-All (8)
  • M-All (8)
  • N-All (8)
  • P-All (8)
  • S-All (8)
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (8)
to
cornerConfiguration
Corner Radius
  • 0.051 (2)
  • 0.057 (2)
  • 0.066 (4)
  • 0.076 (8)
  • 0.08 (4)
  • 0.094 (4)
  • 0.097 (2)
  • 0.1 (4)
  • 0.102 (4)
  • 0.116 (2)
  • 0.117 (2)
  • 0.127 (4)
  • 0.131 (4)
  • 0.132 (4)
  • 0.133 (4)
  • 0.15 (4)
  • 0.155 (4)
  • 0.157 (4)
  • 0.16 (4)
  • 0.165 (8)
  • 0.173 (4)
  • 0.178 (4)
  • 0.19 (8)
  • 0.191 (8)
  • 0.198 (4)
  • 0.2 (4)
  • 0.202 (4)
  • 0.224 (4)
  • 0.235 (4)
  • 0.244 (2)
  • 0.25 (4)
  • 0.251 (4)
  • 0.254 (8)
  • 0.269 (4)
  • 0.282 (4)
  • 0.284 (4)
  • 0.3 (4)
  • 0.315 (6)
  • 0.318 (8)
  • 0.33 (4)
  • 0.34 (4)
  • 0.343 (4)
  • 0.356 (4)
  • 0.404 (4)
  • 0.406 (4)
  • 0.43 (4)
  • 0.445 (8)
  • 0.472 (2)
  • 0.49 (4)
  • 0.508 (4)
  • 0.565 (2)
  • 0.57 (2)
  • 0.572 (8)
  • 0.575 (6)
  • 0.787 (4)
  • 0.902 (8)
  • 1.0 (4)
  • 1.194 (4)
  • 1.195 (2)
  • 1.25 (4)
  • 1.5 (4)
  • 1.585 (4)
  • 1.588 (8)
  • 1.59 (2)
  • 1.75 (4)
  • 1.98 (2)
  • 1.981 (4)
  • 2.0 (8)
  • 2.25 (8)
  • 2.388 (8)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (2)
  • 0.0023 (2)
  • 0.0026 (4)
  • 0.003 (8)
  • 0.0031 (4)
  • 0.0037 (4)
  • 0.0038 (2)
  • 0.004 (4)
  • 0.0046 (4)
  • 0.005 (4)
  • 0.0052 (4)
  • 0.0053 (4)
  • 0.0059 (4)
  • 0.006 (4)
  • 0.0062 (4)
  • 0.0065 (8)
  • 0.0068 (4)
  • 0.007 (4)
  • 0.0075 (8)
  • 0.0078 (4)
  • 0.0079 (2)
  • 0.008 (4)
  • 0.0088 (4)
  • 0.0093 (4)
  • 0.0096 (2)
  • 0.0099 (4)
  • 0.01 (8)
  • 0.0106 (4)
  • 0.0111 (4)
  • 0.0112 (4)
  • 0.0118 (4)
  • 0.0124 (4)
  • 0.0125 (8)
  • 0.013 (4)
  • 0.0135 (8)
  • 0.014 (4)
  • 0.0159 (4)
  • 0.016 (4)
  • 0.017 (4)
  • 0.0175 (8)
  • 0.0186 (2)
  • 0.0193 (4)
  • 0.02 (4)
  • 0.0225 (8)
  • 0.031 (4)
  • 0.0355 (8)
  • 0.0394 (4)
  • 0.047 (4)
  • 0.0492 (4)
  • 0.0591 (4)
  • 0.0625 (8)
  • 0.0689 (4)
  • 0.078 (4)
  • 0.0787 (8)
  • 0.0886 (8)
  • 0.094 (8)
  • 0.0984 (4)
  • 0.106 (2)
  • 0.125 (4)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (4)
  • K313 (8)
  • K420 (8)
  • K4H (4)
  • K68 (8)
  • KB1345 (8)
  • KB1630 (8)
  • KB5625 (4)
  • KC250 (4)
  • KC5010 (8)
  • KC5025 (8)
  • KC5410 (8)
  • KC710 (8)
  • KC720 (8)
  • KC722 (8)
  • KC730 (8)
  • KC732 (4)
  • KC810 (8)
  • KC850 (8)
  • KC910 (4)
  • KC9110 (8)
  • KC9120 (4)
  • KC9320 (8)
  • KC935 (8)
  • KC950 (8)
  • KCK20 (8)
  • KCK20B (8)
  • KCP10B (8)
  • KCP25B (8)
  • KCU10 (8)
  • KCU25 (8)
  • KD050 (2)
  • KD081 (4)
  • KD100 (6)
  • KD120 (8)
  • KD1425 (4)
  • KT175 (4)
  • KT315 (8)
  • KU10T (8)
  • KU25T (8)
  • KU30T (8)
  • KY3000 (8)
  • THM (4)
  • TN10P (6)
  • TN6010 (8)
  • TN6025 (8)
  • TN7110 (8)
  • WU10HT (2)
  • WU10PT (4)
  • WU25PT (2)
Hand Of Tool
  • L (4)
  • R (4)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.626 (2)
  • 1.874 (2)
  • 2.252 (2)
  • 3.5 (2)
  • 3.5433 (4)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 41.3 (2)
  • 47.6 (2)
  • 57.2 (2)
  • 88.9 (2)
  • 90.0 (4)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Cutting Direction
  • E (4)
  • S (4)
Boring Bar Material
  • S (4)
frontEnd
Cutting Width
  • 1.0 (4)
  • 1.19 (2)
  • 1.194 (4)
  • 1.2 (4)
  • 1.5 (4)
  • 1.57 (4)
  • 1.575 (4)
  • 1.75 (4)
  • 1.829 (4)
  • 1.981 (4)
  • 2.0 (4)
  • 2.2 (4)
  • 2.235 (4)
  • 2.24 (2)
  • 2.25 (2)
  • 2.388 (4)
  • 2.39 (2)
  • 2.464 (4)
  • 2.5 (4)
  • 2.667 (4)
  • 2.743 (4)
  • 2.75 (4)
  • 2.794 (4)
  • 2.997 (4)
  • 3.0 (8)
  • 3.099 (4)
  • 3.17 (4)
  • 3.175 (8)
  • 3.18 (2)
  • 3.2 (8)
  • 3.25 (4)
  • 3.251 (4)
  • 3.32 (2)
  • 3.329 (2)
  • 3.5 (8)
  • 3.607 (4)
  • 3.96 (4)
  • 3.962 (4)
  • 3.974 (2)
  • 3.988 (4)
  • 4.0 (8)
  • 4.24 (2)
  • 4.242 (8)
  • 4.25 (2)
  • 4.3 (4)
  • 4.5 (8)
  • 4.521 (4)
  • 4.699 (6)
  • 4.775 (8)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (4)
  • 4.801 (8)
  • 4.81 (4)
  • 4.88 (2)
  • 4.95 (4)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)
to
Cutting Width
  • 0.0394 (4)
  • 0.047 (4)
  • 0.0472 (4)
  • 0.0591 (4)
  • 0.062 (4)
  • 0.0689 (4)
  • 0.072 (4)
  • 0.078 (4)
  • 0.0787 (4)
  • 0.079 (2)
  • 0.0866 (4)
  • 0.088 (4)
  • 0.0886 (2)
  • 0.094 (4)
  • 0.097 (4)
  • 0.0984 (4)
  • 0.105 (4)
  • 0.108 (4)
  • 0.1083 (4)
  • 0.11 (4)
  • 0.118 (4)
  • 0.1181 (8)
  • 0.122 (4)
  • 0.125 (8)
  • 0.126 (8)
  • 0.128 (4)
  • 0.131 (2)
  • 0.1378 (8)
  • 0.142 (4)
  • 0.156 (4)
  • 0.157 (4)
  • 0.1574 (8)
  • 0.1575 (8)
  • 0.167 (8)
  • 0.1673 (2)
  • 0.169 (4)
  • 0.1771 (8)
  • 0.1772 (8)
  • 0.178 (4)
  • 0.185 (6)
  • 0.188 (8)
  • 0.189 (8)
  • 0.192 (2)
  • 0.195 (4)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.219 (4)
  • 0.2362 (4)
  • 0.25 (4)
  • 0.255 (4)
to
Insert Size
  • 3 (4)
  • 4 (4)
Maximum Cutting Depth
  • 5.33 (4)
  • 7.47 (4)
to
Maximum Cutting Depth
  • 0.2098 (2)
  • 0.21 (2)
  • 0.291 (1)
  • 0.294 (1)
  • 0.2941 (2)
to
insertGeometry
Cutting Tool Material
  • B H (8)
  • B L (4)
  • C N (8)
  • D P (6)
  • H T (8)
  • H W (8)
other
Insert Hand
  • L (4)
  • R (4)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

PSC63

Cutting Units • Threading and Grooving
(4 Products)
  • Shank - PSCShank - PSC
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Especificaciones del fabricante: ISO 26623Especificaciones del fabricante: ISO 26623
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
4092485 PSC63NER3 PSC63NER3 65.0000 2.559 45.0000 1.771 90.0000 3.543 NG3L 1.43
    List price:
    $446.91 /each.
    Your price::
    Qty
    4092486 PSC63NEL3 PSC63NEL3 65.0000 2.559 45.0000 1.771 90.0000 3.543 NG3R 1.43
      List price:
      $522.77 /each.
      Your price::
      Qty
      4092487 PSC63NER4 PSC63NER4 65.0000 2.559 45.0000 1.771 90.0000 3.543 NG4L 1.42
        List price:
        $606.61 /each.
        Your price::
        Qty
        4092488 PSC63NEL4 PSC63NEL4 65.0000 2.559 45.0000 1.771 90.0000 3.543 NG4R 1.42
          List price:
          $602.81 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          PSC63

          Cutting Units • Threading and Grooving
          (4 Products)
          • Shank - PSCShank - PSC
          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
          • Especificaciones del fabricante: ISO 26623Especificaciones del fabricante: ISO 26623
          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
          4092489 PSC63NSR3 PSC63NSR3 65.0000 2.559 45.0000 1.771 NG3R 1.31
            List price:
            $446.91 /each.
            Your price::
            Qty
            4092490 PSC63NSL3 PSC63NSL3 65.0000 2.559 45.0000 1.771 NG3L 1.31
              List price:
              $446.91 /each.
              Your price::
              Qty
              4092491 PSC63NSR4 PSC63NSR4 65.0000 2.559 45.0000 1.771 NG4R 1.30
                List price:
                $574.84 /each.
                Your price::
                Qty
                4092492 PSC63NSL4 PSC63NSL4 65.0000 2.559 45.0000 1.771 NG4L 1.30
                  List price:
                  $510.43 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  product-image
                  Please adjust the following properties from

                  ISO catálogo

                  ANSI catálogo

                  to find similar products.
                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                  You are about to create a duplicate . Do you want to proceed?
                  You are about to delete Do you want to proceed?
                  What would you like to rename your to?
                  Please enter a valid name
                  Please enter a name for the duplicate
                  Please enter a valid name
                  You are about to add to your My Solutions page. Do you want to proceed?
                  Please enter a valid name
                  Send a copy of

                  Please enter a valid Email
                  Please enter a valid name

                  We have found the following CAD Drawings

                  Select the files you are looking for and download them all at once

                  You should be logged to see your dashboard information
                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                  item(s) successfully added to the cart
                  View Cart