successfully added to cart
View Cart

PSC 50 Internal Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Facing Facing (41)
  • ID Facing ID Facing (41)
  • ID Grooving ID Grooving (7)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (41)
  • Plunge Turning Plunge Turning (28)
  • TRN Boring TRN Boring (41)
  • Turning Turning (41)
Workpiece Material
  • P Steel (54)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (54)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (54)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (54)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (54)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (54)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (54)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (54)
  • M Stainless Steel (54)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (54)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (54)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (54)
  • K Cast Iron (54)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (54)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (54)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (54)
  • N Non-Ferrous Materials (52)
    • N1
      Wrought Aluminum
      (52)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (52)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (38)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (52)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (52)
    • N6
      Carbon, Graphite Composites, CFRP
      (46)
    • N7
      MMC's
      (52)
  • S High-Temp Alloys (54)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (54)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (54)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (54)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (54)
  • H Hardened Materials (46)
    • H1
      Hardened Materials 44-48 HRC
      (46)
    • H2
      Hardened Materials 48-55 HRC
      (40)
    • H3
      Hardened Materials 56-60 HRC
      (38)
    • H4
      Hardened Materials >60 HRC
      (38)
Type of Thread
  • 55 (6)
  • 60 (13)
  • ACME (11)
  • API (6)
  • API BUTTRESS (1)
  • API RD (9)
  • BSPT (5)
  • BSW (10)
  • BUTTRESS (7)
  • M (12)
  • NPT (9)
  • NPTF (5)
  • RD DIN 405 (6)
  • STUB ACME (10)
  • TR DIN 103 (6)
  • UN (12)
  • UNJ (9)
Cutting Condition
  • Heavily Interrupted Cut (48)
  • Interrupted (21)
  • Lightly Interrupted Cut (48)
  • Smooth Cut (48)
  • Varying Depth of Cut (48)
Cutting Condition Material
  • H-All (40)
  • K-All (48)
  • K1 (17)
  • M-All (48)
  • N-All (46)
  • P-All (48)
  • S-All (46)
  • S2 (19)
  • S4 (16)
Tool Cutting Edge Angle
  • 75.0 (1)
  • 90.0 (13)
  • 93.0 (13)
  • 95.0 (21)
  • 107.5 (6)
to
Cutting Edges Per Insert
  • 1.0 (37)
  • 2.0 (44)
  • 3.0 (7)
  • 4.0 (32)
  • 6.0 (1)
  • 8.0 (15)
to
cornerConfiguration
Corner Radius
  • 0.03 (4)
  • 0.038 (17)
  • 0.051 (6)
  • 0.056 (2)
  • 0.057 (3)
  • 0.066 (4)
  • 0.07 (5)
  • 0.076 (10)
  • 0.08 (9)
  • 0.081 (3)
  • 0.089 (2)
  • 0.09 (2)
  • 0.094 (4)
  • 0.097 (6)
  • 0.1 (37)
  • 0.102 (24)
  • 0.108 (3)
  • 0.116 (1)
  • 0.117 (3)
  • 0.127 (4)
  • 0.131 (4)
  • 0.132 (4)
  • 0.133 (4)
  • 0.15 (4)
  • 0.152 (5)
  • 0.155 (4)
  • 0.157 (4)
  • 0.16 (4)
  • 0.165 (5)
  • 0.173 (4)
  • 0.178 (4)
  • 0.185 (2)
  • 0.19 (7)
  • 0.191 (7)
  • 0.198 (4)
  • 0.2 (37)
  • 0.202 (6)
  • 0.203 (18)
  • 0.21 (5)
  • 0.224 (4)
  • 0.235 (4)
  • 0.244 (1)
  • 0.25 (6)
  • 0.251 (4)
  • 0.254 (7)
  • 0.269 (4)
  • 0.282 (4)
  • 0.284 (4)
  • 0.3 (4)
  • 0.305 (1)
  • 0.315 (4)
  • 0.318 (5)
  • 0.33 (4)
  • 0.34 (9)
  • 0.343 (1)
  • 0.356 (4)
  • 0.397 (37)
  • 0.4 (41)
  • 0.404 (4)
  • 0.406 (9)
  • 0.43 (4)
  • 0.432 (1)
  • 0.445 (5)
  • 0.472 (1)
  • 0.49 (4)
  • 0.5 (2)
  • 0.508 (4)
  • 0.57 (3)
  • 0.572 (5)
  • 0.575 (2)
  • 0.6 (1)
  • 0.7 (3)
  • 0.75 (2)
  • 0.787 (6)
  • 0.79 (1)
  • 0.791 (6)
  • 0.792 (15)
  • 0.794 (36)
  • 0.8 (41)
  • 0.902 (5)
  • 0.93 (1)
  • 0.936 (3)
  • 1.0 (6)
  • 1.188 (8)
  • 1.19 (10)
  • 1.191 (26)
  • 1.194 (6)
  • 1.195 (3)
  • 1.2 (40)
  • 1.25 (6)
  • 1.404 (1)
  • 1.5 (6)
  • 1.585 (4)
  • 1.587 (10)
  • 1.588 (21)
  • 1.6 (25)
  • 1.75 (6)
  • 1.98 (3)
  • 1.981 (4)
  • 2.0 (5)
  • 2.25 (5)
  • 2.38 (2)
  • 2.388 (5)
  • 2.39 (1)
  • 2.4 (3)
  • 2.5 (1)
  • 3.175 (1)
  • 3.2 (2)
to
Corner Radius
  • 0.001 (1)
  • 0.0012 (3)
  • 0.0015 (17)
  • 0.002 (6)
  • 0.0023 (3)
  • 0.0026 (4)
  • 0.0028 (5)
  • 0.003 (10)
  • 0.0031 (6)
  • 0.0032 (3)
  • 0.0035 (2)
  • 0.0037 (4)
  • 0.0038 (6)
  • 0.004 (45)
  • 0.0043 (3)
  • 0.0046 (4)
  • 0.005 (4)
  • 0.0052 (4)
  • 0.0053 (4)
  • 0.0059 (4)
  • 0.006 (9)
  • 0.0062 (4)
  • 0.0063 (3)
  • 0.0065 (5)
  • 0.0068 (4)
  • 0.007 (4)
  • 0.0075 (7)
  • 0.0078 (5)
  • 0.0079 (2)
  • 0.008 (39)
  • 0.0083 (15)
  • 0.0088 (4)
  • 0.0093 (4)
  • 0.0096 (1)
  • 0.0099 (4)
  • 0.01 (7)
  • 0.0106 (4)
  • 0.0111 (4)
  • 0.0112 (4)
  • 0.0118 (4)
  • 0.012 (1)
  • 0.0124 (4)
  • 0.0125 (5)
  • 0.013 (9)
  • 0.0135 (5)
  • 0.014 (4)
  • 0.0156 (41)
  • 0.0158 (1)
  • 0.0159 (4)
  • 0.016 (27)
  • 0.017 (5)
  • 0.0175 (5)
  • 0.0186 (1)
  • 0.0193 (4)
  • 0.0197 (2)
  • 0.02 (4)
  • 0.022 (2)
  • 0.0225 (5)
  • 0.0276 (3)
  • 0.0295 (2)
  • 0.031 (29)
  • 0.0311 (6)
  • 0.0312 (36)
  • 0.0313 (41)
  • 0.0315 (23)
  • 0.0355 (5)
  • 0.0368 (1)
  • 0.0369 (3)
  • 0.0394 (6)
  • 0.0468 (8)
  • 0.0469 (40)
  • 0.047 (25)
  • 0.0472 (11)
  • 0.0492 (6)
  • 0.0516 (1)
  • 0.0553 (1)
  • 0.0591 (6)
  • 0.0625 (32)
  • 0.063 (19)
  • 0.0689 (6)
  • 0.078 (4)
  • 0.0787 (5)
  • 0.0886 (5)
  • 0.0938 (3)
  • 0.094 (7)
  • 0.0984 (1)
  • 0.106 (3)
  • 0.125 (1)
  • 0.126 (2)
  • 0.1563 (10)
  • 0.312 (5)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (18)
  • 241 (10)
  • CL4 (16)
  • CM2 (18)
  • CM3 (16)
  • CM4 (13)
  • CPX (18)
  • CW2 (15)
  • CW2015 (18)
  • CW5025 (19)
  • GH1 (1)
  • GX (11)
  • HCK10 (8)
  • HCK20 (3)
  • HK1500 (30)
  • HK35 (2)
  • HT2 (35)
  • HTX (24)
  • HWK15 (8)
  • K060 (11)
  • K090 (18)
  • K1 (10)
  • K1010P (1)
  • K10M (27)
  • K10P (21)
  • K10U (31)
  • K15 (6)
  • K15U (31)
  • K20K (20)
  • K21 (11)
  • K25M (33)
  • K25P (26)
  • K2885 (6)
  • K313 (46)
  • K35P (9)
  • K420 (21)
  • K45 (11)
  • K4H (4)
  • K68 (42)
  • KB1340 (17)
  • KB1345 (22)
  • KB1610 (26)
  • KB1625 (18)
  • KB1630 (21)
  • KB5610 (25)
  • KB5625 (29)
  • KB5630 (24)
  • KB9610 (31)
  • KB9640 (18)
  • KBH10 (31)
  • KBH10B (15)
  • KBH20 (31)
  • KBH20B (15)
  • KBK35 (10)
  • KC210 (16)
  • KC250 (19)
  • KC5010 (51)
  • KC5020P (8)
  • KC5025 (52)
  • KC5410 (40)
  • KC5510 (25)
  • KC5525 (22)
  • KC710 (21)
  • KC720 (41)
  • KC722 (20)
  • KC730 (49)
  • KC7310 (27)
  • KC732 (32)
  • KC8050 (41)
  • KC810 (46)
  • KC850 (48)
  • KC9010 (35)
  • KC9025 (41)
  • KC910 (37)
  • KC9105 (39)
  • KC9110 (48)
  • KC9120 (38)
  • KC9125 (41)
  • KC9125RR (1)
  • KC9140 (27)
  • KC9145 (19)
  • KC9210 (5)
  • KC9215 (27)
  • KC9225 (41)
  • KC9240 (41)
  • KC9240NEW (41)
  • KC9245 (27)
  • KC9315 (41)
  • KC9320 (46)
  • KC9325 (32)
  • KC935 (48)
  • KC950 (40)
  • KC990 (35)
  • KCD25 (13)
  • KCK05 (41)
  • KCK05B (38)
  • KCK15 (38)
  • KCK15B (41)
  • KCK20 (44)
  • KCK20B (46)
  • KCM15 (41)
  • KCM15B (41)
  • KCM25 (41)
  • KCM25B (39)
  • KCM35 (33)
  • KCM35B (26)
  • KCP05 (39)
  • KCP05B (35)
  • KCP10 (41)
  • KCP10B (48)
  • KCP15 (6)
  • KCP25 (41)
  • KCP25B (48)
  • KCP30 (41)
  • KCP30B (25)
  • KCP40 (19)
  • KCP40B (27)
  • KCPK05 (25)
  • KCS10 (24)
  • KCS10B (39)
  • KCU10 (48)
  • KCU25 (46)
  • KD050 (25)
  • KD081 (28)
  • KD100 (20)
  • KD120 (16)
  • KD1400 (25)
  • KD1405 (16)
  • KD1425 (29)
  • KM1 (11)
  • KMF (10)
  • KT1120 (10)
  • KT125 (17)
  • KT150 (11)
  • KT175 (36)
  • KT315 (46)
  • KT325 (35)
  • KTP10 (14)
  • KU10 (14)
  • KU10T (44)
  • KU25T (10)
  • KU30T (46)
  • KY1310 (14)
  • KY1320 (19)
  • KY1540 (11)
  • KY1615 (18)
  • KY2000 (13)
  • KY2100 (11)
  • KY3000 (23)
  • KY3400 (14)
  • KY3500 (19)
  • KY4000 (13)
  • KY4300 (12)
  • KY4400 (19)
  • KYHK15B (19)
  • KYK10 (12)
  • KYK25 (14)
  • KYK35 (19)
  • KYS25 (11)
  • KYS30 (12)
  • NL200 (15)
  • NL250 (25)
  • NL300 (18)
  • NL400 (13)
  • NL920 (23)
  • P25 (17)
  • PB100 (11)
  • PB170 (10)
  • PB250 (11)
  • PB300 (10)
  • PD100 (8)
  • PD50 (2)
  • PS5 (21)
  • SP0819 (18)
  • SP0A00 (1)
  • SP3019 (14)
  • SP4019 (14)
  • SP4066 (2)
  • SP61EJ (1)
  • SPN3W1 (6)
  • THM (36)
  • THM-X (17)
  • THMF-X (11)
  • TN10P (45)
  • TN10U (31)
  • TN15M (35)
  • TN15U (31)
  • TN2000 (30)
  • TN20K (33)
  • TN20P (41)
  • TN30M (41)
  • TN30P (19)
  • TN4000 (29)
  • TN5015 (32)
  • TN5020 (39)
  • TN5105 (30)
  • TN5120 (39)
  • TN6010 (29)
  • TN6025 (37)
  • TN7005 (37)
  • TN7010 (41)
  • TN7015 (41)
  • TN7025 (41)
  • TN7035 (33)
  • TN7105 (36)
  • TN7110 (46)
  • TN7115 (39)
  • TN7125 (39)
  • TN7135 (33)
  • TN8025 (33)
  • TTI15 (34)
  • TTM (6)
  • TTM09 (1)
  • TTR (18)
  • TTS (22)
  • TTX (29)
  • W00342 (2)
  • WBH10C (30)
  • WBH10P (24)
  • WBH10U (26)
  • WBH20P (25)
  • WBH25P (25)
  • WBH25U (24)
  • WBH30P (24)
  • WBK40U (17)
  • WBK45U (22)
  • WDN00U (16)
  • WDN25U (25)
  • WK05CT (33)
  • WK15CT (30)
  • WK20CT (39)
  • WM15CT (39)
  • WM25CT (39)
  • WM35CT (25)
  • WP05CT (11)
  • WP15CT (39)
  • WP20TT (7)
  • WP25CT (39)
  • WP35CT (39)
  • WS10PT (32)
  • WS25PT (32)
  • WU05PT (8)
  • WU10HT (40)
  • WU10PT (37)
  • WU25PT (39)
  • X00511 (10)
Hand Of Tool
  • L (26)
  • R (28)
Minimum Axial Groove Diameter
  • 0.7874 (6)
  • 0.9449 (1)
  • 0.9843 (5)
  • 1.2598 (14)
  • 1.2992 (3)
  • 1.3189 (1)
  • 1.5157 (2)
  • 1.5748 (6)
  • 1.9094 (1)
  • 1.9685 (7)
  • 2.0669 (1)
  • 2.4803 (7)
to
Minimum Axial Groove Diameter
  • 20.0 (6)
  • 24.0 (1)
  • 25.0 (5)
  • 32.0 (14)
  • 33.0 (3)
  • 33.5 (1)
  • 38.5 (2)
  • 40.0 (6)
  • 48.5 (1)
  • 50.0 (7)
  • 52.5 (1)
  • 63.0 (7)
to
Maximum Axial Groove Diameter
  • 9999.0 (7)
to
Maximum Axial Groove Diameter
  • 393.661 (7)
to
Cutting Direction
  • B (21)
  • E (20)
  • S (13)
Rake Angle Style
  • DOUBLE NEGATIVE (33)
  • NEGATIVE-ZERO (14)
Maximum Bore Depth
  • 36.0 (3)
  • 46.0 (3)
  • 47.0 (2)
  • 51.0 (1)
  • 56.0 (4)
  • 64.0 (3)
  • 66.0 (5)
  • 67.0 (10)
  • 80.0 (1)
  • 88.0 (6)
  • 88.4 (1)
  • 100.0 (2)
  • 113.0 (2)
  • 118.0 (2)
  • 119.0 (4)
  • 150.0 (5)
to
Maximum Bore Depth
  • 1.4173 (3)
  • 1.811 (3)
  • 1.8504 (2)
  • 2.0079 (1)
  • 2.2047 (4)
  • 2.5197 (3)
  • 2.5984 (5)
  • 2.6378 (10)
  • 3.1496 (1)
  • 3.4646 (6)
  • 3.4803 (1)
  • 3.937 (2)
  • 4.4488 (2)
  • 4.6457 (2)
  • 4.685 (4)
  • 5.9055 (5)
to
Wiper Insert
  • N (54)
  • Y (30)
frontEnd
Clamp Style
  • D (7)
  • N (7)
  • P (20)
  • S (20)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (20)
  • D-DIAMOND/RHOMBIC 55 (13)
  • LT-TRIANGLE LAY DOWN THREAD 60 (6)
  • S-SQUARE 90 (1)
  • TN-TOP NOTCH (7)
  • V-DIAMOND/RHOMBIC 35 (6)
  • W-TRIGON 80 (1)
Cutting Width
  • 0.5 (2)
  • 0.787 (2)
  • 0.8 (2)
  • 0.889 (2)
  • 0.991 (2)
  • 1.0 (6)
  • 1.041 (2)
  • 1.19 (5)
  • 1.194 (6)
  • 1.199 (2)
  • 1.2 (6)
  • 1.39 (2)
  • 1.397 (2)
  • 1.4 (2)
  • 1.473 (2)
  • 1.5 (6)
  • 1.56 (2)
  • 1.57 (4)
  • 1.575 (6)
  • 1.69 (2)
  • 1.7 (2)
  • 1.702 (2)
  • 1.75 (6)
  • 1.829 (4)
  • 1.94 (2)
  • 1.95 (2)
  • 1.956 (2)
  • 1.981 (4)
  • 2.0 (6)
  • 2.007 (2)
  • 2.2 (6)
  • 2.235 (6)
  • 2.24 (3)
  • 2.25 (5)
  • 2.388 (6)
  • 2.39 (3)
  • 2.464 (4)
  • 2.5 (6)
  • 2.667 (4)
  • 2.74 (2)
  • 2.743 (6)
  • 2.75 (6)
  • 2.794 (4)
  • 2.997 (6)
  • 3.0 (7)
  • 3.099 (4)
  • 3.17 (4)
  • 3.175 (7)
  • 3.2 (7)
  • 3.245 (2)
  • 3.25 (4)
  • 3.251 (6)
  • 3.27 (2)
  • 3.32 (1)
  • 3.329 (1)
  • 3.5 (7)
  • 3.607 (4)
  • 3.73 (2)
  • 3.81 (2)
  • 3.84 (2)
  • 3.96 (4)
  • 3.962 (4)
  • 3.974 (1)
  • 3.988 (4)
  • 4.0 (5)
  • 4.24 (3)
  • 4.242 (5)
  • 4.25 (1)
  • 4.3 (4)
  • 4.5 (5)
  • 4.521 (4)
  • 4.699 (5)
  • 4.775 (5)
  • 4.78 (1)
  • 4.785 (1)
  • 4.8 (4)
  • 4.801 (5)
  • 4.81 (4)
  • 4.88 (1)
  • 4.95 (4)
  • 5.0 (1)
  • 5.004 (1)
  • 5.131 (1)
  • 5.41 (1)
  • 5.5 (1)
  • 5.563 (1)
  • 6.0