successfully added to cart
View Cart

Unidades de corte KM50TS™

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Chamfer Turning Chamfer Turning (6)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (4)
  • Facing Facing (87)
  • Grooving Grooving (8)
  • ID Grooving ID Grooving (4)
  • ID Thread Turning ID Thread Turning (10)
  • Multiple Direction Cutting Multiple Direction Cutting (72)
  • OD Thread Turning OD Thread Turning (19)
  • Plunge Turning Plunge Turning (6)
  • Profiling Profiling (72)
  • TRN Boring TRN Boring (84)
  • Threading Threading (23)
  • Turning Turning (115)
Workpiece Material
  • P Steel (125)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (123)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (123)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (123)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (123)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (123)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (125)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (125)
  • M Stainless Steel (125)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (125)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (125)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (125)
  • K Cast Iron (137)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (137)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (137)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (137)
  • N Non-Ferrous Materials (123)
    • N1
      Wrought Aluminum
      (121)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (119)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (57)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (121)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (119)
    • N6
      Carbon, Graphite Composites, CFRP
      (104)
    • N7
      MMC's
      (119)
  • S High-Temp Alloys (137)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (135)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (137)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (135)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (123)
  • H Hardened Materials (118)
    • H1
      Hardened Materials 44-48 HRC
      (118)
    • H2
      Hardened Materials 48-55 HRC
      (109)
    • H3
      Hardened Materials 56-60 HRC
      (109)
    • H4
      Hardened Materials >60 HRC
      (93)
Type of Thread
  • 55 (9)
  • 60 (19)
  • ACME (19)
  • API (15)
  • API BUTTRESS (3)
  • API RD (12)
  • BSPT (6)
  • BSW (15)
  • BUTTRESS (10)
  • M (15)
  • NPT (12)
  • NPTF (6)
  • RD DIN 405 (9)
  • STUB ACME (15)
  • TR DIN 103 (9)
  • UN (16)
  • UNJ (12)
Cutting Condition
  • Heavily Interrupted Cut (126)
  • Interrupted (83)
  • Lightly Interrupted Cut (126)
  • Smooth Cut (126)
  • Varying Depth of Cut (126)
Cutting Condition Material
  • H-All (109)
  • K-All (126)
  • K1 (32)
  • M-All (110)
  • N-All (99)
  • P-All (112)
  • S-All (110)
  • S2 (93)
  • S4 (28)
Tool Cutting Edge Angle
  • 45.0 (15)
  • 48.0 (2)
  • 49.783 (1)
  • 62.5 (2)
  • 63.0 (2)
  • 75.0 (32)
  • 85.0 (4)
  • 90.0 (31)
  • 93.0 (25)
  • 95.0 (18)
  • 107.5 (10)
to
Connection Style
  • KM (62)
Cutting Edges Per Insert
  • 1.0 (65)
  • 2.0 (73)
  • 3.0 (20)
  • 4.0 (91)
  • 6.0 (9)
  • 8.0 (66)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.03 (1)
  • 0.038 (3)
  • 0.051 (9)
  • 0.056 (1)
  • 0.057 (3)
  • 0.066 (6)
  • 0.07 (2)
  • 0.071 (2)
  • 0.076 (15)
  • 0.08 (9)
  • 0.081 (1)
  • 0.082 (2)
  • 0.085 (2)
  • 0.086 (2)
  • 0.091 (2)
  • 0.094 (6)
  • 0.097 (4)
  • 0.1 (46)
  • 0.102 (41)
  • 0.108 (1)
  • 0.116 (3)
  • 0.117 (3)
  • 0.127 (6)
  • 0.131 (6)
  • 0.132 (6)
  • 0.133 (6)
  • 0.135 (2)
  • 0.15 (6)
  • 0.152 (2)
  • 0.155 (6)
  • 0.157 (6)
  • 0.159 (2)
  • 0.16 (5)
  • 0.165 (10)
  • 0.173 (6)
  • 0.178 (8)
  • 0.19 (10)
  • 0.191 (10)
  • 0.198 (6)
  • 0.2 (49)
  • 0.202 (6)
  • 0.203 (34)
  • 0.21 (2)
  • 0.223 (2)
  • 0.224 (6)
  • 0.235 (6)
  • 0.24 (2)
  • 0.244 (3)
  • 0.25 (6)
  • 0.251 (6)
  • 0.254 (10)
  • 0.269 (8)
  • 0.279 (4)
  • 0.282 (6)
  • 0.284 (6)
  • 0.3 (6)
  • 0.305 (2)
  • 0.31 (2)
  • 0.315 (8)
  • 0.318 (12)
  • 0.33 (6)
  • 0.34 (21)
  • 0.343 (4)
  • 0.356 (6)
  • 0.381 (2)
  • 0.397 (73)
  • 0.4 (83)
  • 0.404 (6)
  • 0.406 (33)
  • 0.43 (6)
  • 0.432 (3)
  • 0.445 (10)
  • 0.472 (3)
  • 0.49 (6)
  • 0.508 (6)
  • 0.51 (2)
  • 0.533 (1)
  • 0.565 (2)
  • 0.57 (3)
  • 0.572 (10)
  • 0.575 (7)
  • 0.6 (4)
  • 0.64 (2)
  • 0.7 (1)
  • 0.76 (2)
  • 0.787 (6)
  • 0.79 (17)
  • 0.792 (26)
  • 0.794 (75)
  • 0.8 (110)
  • 0.902 (10)
  • 0.93 (1)
  • 0.936 (1)
  • 0.97 (2)
  • 1.0 (6)
  • 1.01 (1)
  • 1.188 (10)
  • 1.19 (11)
  • 1.191 (92)
  • 1.194 (6)
  • 1.195 (3)
  • 1.2 (110)
  • 1.25 (6)
  • 1.404 (1)
  • 1.5 (6)
  • 1.515 (1)
  • 1.585 (6)
  • 1.587 (11)
  • 1.588 (63)
  • 1.59 (2)
  • 1.6 (95)
  • 1.75 (6)
  • 1.98 (3)
  • 1.981 (6)
  • 2.0 (10)
  • 2.25 (10)
  • 2.38 (8)
  • 2.381 (8)
  • 2.388 (10)
  • 2.39 (2)
  • 2.4 (45)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (3)
  • 3.2 (11)
  • 4.0 (2)
  • 6.0 (2)
  • 6.35 (4)
to
Corner Radius
  • 0.0012 (1)
  • 0.0015 (3)
  • 0.002 (9)
  • 0.0023 (3)
  • 0.0026 (6)
  • 0.0028 (4)
  • 0.003 (15)
  • 0.0031 (8)
  • 0.0032 (3)
  • 0.0033 (2)
  • 0.0034 (2)
  • 0.0037 (6)
  • 0.0038 (4)
  • 0.0039 (2)
  • 0.004 (60)
  • 0.0043 (1)
  • 0.0046 (6)
  • 0.005 (6)
  • 0.0052 (6)
  • 0.0053 (8)
  • 0.0059 (6)
  • 0.006 (8)
  • 0.0062 (6)
  • 0.0063 (3)
  • 0.0065 (10)
  • 0.0068 (6)
  • 0.007 (8)
  • 0.0075 (10)
  • 0.0078 (6)
  • 0.0079 (3)
  • 0.008 (53)
  • 0.0083 (13)
  • 0.0088 (8)
  • 0.0093 (6)
  • 0.0094 (2)
  • 0.0096 (3)
  • 0.0099 (6)
  • 0.01 (10)
  • 0.0106 (8)
  • 0.011 (4)
  • 0.0111 (6)
  • 0.0112 (6)
  • 0.0118 (6)
  • 0.012 (2)
  • 0.0122 (2)
  • 0.0124 (6)
  • 0.0125 (12)
  • 0.013 (21)
  • 0.0135 (10)
  • 0.014 (6)
  • 0.015 (2)
  • 0.0156 (83)
  • 0.0158 (2)
  • 0.0159 (6)
  • 0.016 (79)
  • 0.017 (9)
  • 0.0175 (10)
  • 0.0186 (3)
  • 0.0193 (6)
  • 0.02 (8)
  • 0.021 (1)
  • 0.022 (1)
  • 0.0225 (10)
  • 0.025 (2)
  • 0.0276 (1)
  • 0.0298 (2)
  • 0.031 (90)
  • 0.0312 (75)
  • 0.0313 (110)
  • 0.0315 (15)
  • 0.0355 (10)
  • 0.0368 (1)
  • 0.0369 (1)
  • 0.038 (2)
  • 0.0394 (6)
  • 0.0398 (1)
  • 0.0468 (10)
  • 0.0469 (110)
  • 0.047 (91)
  • 0.0472 (11)
  • 0.0492 (6)
  • 0.0516 (17)
  • 0.0553 (1)
  • 0.0591 (6)
  • 0.0597 (1)
  • 0.0625 (105)
  • 0.063 (75)
  • 0.0689 (6)
  • 0.078 (6)
  • 0.0787 (10)
  • 0.0886 (10)
  • 0.0938 (53)
  • 0.094 (31)
  • 0.0984 (4)
  • 0.106 (3)
  • 0.125 (5)
  • 0.126 (10)
  • 0.1563 (11)
  • 0.1575 (2)
  • 0.2362 (2)
  • 0.25 (4)
  • 0.312 (15)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (75)
  • 241 (11)
  • AC5 (2)
  • CL4 (51)
  • CM2 (73)
  • CM3 (54)
  • CM4 (40)
  • CM5 (2)
  • CPX (70)
  • CW2 (30)
  • CW2015 (75)
  • CW3020 (2)
  • CW5025 (101)
  • GX (33)
  • HCK10 (2)
  • HCK20 (1)
  • HK1500 (56)
  • HK35 (2)
  • HT2 (34)
  • HTX (19)
  • HWK15 (2)
  • K060 (40)
  • K090 (90)
  • K1 (16)
  • K10M (83)
  • K10P (79)
  • K10U (69)
  • K15 (3)
  • K15U (69)
  • K20K (94)
  • K21 (37)
  • K25M (81)
  • K25P (84)
  • K2885 (6)
  • K313 (112)
  • K35P (59)
  • K420 (81)
  • K45 (48)
  • K4H (6)
  • K68 (107)
  • KB1340 (32)
  • KB1345 (35)
  • KB1610 (53)
  • KB1625 (49)
  • KB1630 (42)
  • KB5610 (32)
  • KB5625 (55)
  • KB5630 (28)
  • KB9610 (68)
  • KB9640 (38)
  • KBH10 (68)
  • KBH10B (45)
  • KBH20 (70)
  • KBH20B (45)
  • KBK35 (11)
  • KC210 (56)
  • KC250 (55)
  • KC5010 (118)
  • KC5020P (2)
  • KC5025 (121)
  • KC5410 (95)
  • KC5510 (94)
  • KC5525 (43)
  • KC710 (28)
  • KC720 (84)
  • KC722 (24)
  • KC730 (93)
  • KC7310 (94)
  • KC732 (72)
  • KC8050 (102)
  • KC810 (110)
  • KC850 (112)
  • KC9010 (94)
  • KC9025 (100)
  • KC910 (104)
  • KC9105 (98)
  • KC9110 (112)
  • KC9120 (102)
  • KC9125 (102)
  • KC9125RR (17)
  • KC9140 (96)
  • KC9145 (81)
  • KC9210 (15)
  • KC9215 (94)
  • KC9225 (98)
  • KC9240 (100)
  • KC9240NEW (100)
  • KC9245 (94)
  • KC9315 (102)
  • KC9320 (112)
  • KC9325 (98)
  • KC935 (110)
  • KC950 (104)
  • KC990 (96)
  • KCD25 (12)
  • KCK05 (100)
  • KCK05B (85)
  • KCK15 (102)
  • KCK15B (102)
  • KCK20 (112)
  • KCK20B (112)
  • KCM15 (98)
  • KCM15B (96)
  • KCM25 (100)
  • KCM25B (100)
  • KCM35 (94)
  • KCM35B (74)
  • KCP05 (83)
  • KCP05B (72)
  • KCP10 (102)
  • KCP10B (112)
  • KCP15 (2)
  • KCP25 (102)
  • KCP25B (112)
  • KCP30 (102)
  • KCP30B (87)
  • KCP40 (83)
  • KCP40B (87)
  • KCPK05 (92)
  • KCS10 (17)
  • KCS10B (95)
  • KCU10 (112)
  • KCU25 (110)
  • KD050 (53)
  • KD081 (56)
  • KD100 (36)
  • KD120 (58)
  • KD1400 (36)
  • KD1405 (28)
  • KD1425 (42)
  • KM1 (35)
  • KMF (11)
  • KT1120 (11)
  • KT125 (63)
  • KT150 (47)
  • KT175 (71)
  • KT315 (85)
  • KT325 (38)
  • KT5020 (11)
  • KTP10 (10)
  • KU10 (2)
  • KU10T (85)
  • KU25T (13)
  • KU30T (110)
  • KY1310 (77)
  • KY1320 (102)
  • KY1525 (2)
  • KY1540 (51)
  • KY1615 (91)
  • KY2000 (52)
  • KY2100 (38)
  • KY3000 (98)
  • KY3400 (82)
  • KY3500 (104)
  • KY4000 (43)
  • KY4300 (31)
  • KY4400 (81)
  • KYHK15B (93)
  • KYK10 (56)
  • KYK25 (80)
  • KYK35 (104)
  • KYS25 (50)
  • KYS30 (54)
  • MC2 (4)
  • MC3 (2)
  • NL200 (26)
  • NL250 (94)
  • NL300 (73)
  • NL400 (25)
  • NL920 (76)
  • P25 (32)
  • PB100 (11)
  • PB170 (13)
  • PB250 (13)
  • PB300 (11)
  • PD100 (2)
  • PD50 (2)
  • PN120 (2)
  • PS5 (30)
  • SP0819 (58)
  • SP0A00 (17)
  • SP0PW3 (2)
  • SP3019 (49)
  • SP4019 (53)
  • SP4036 (7)
  • SP4066 (1)
  • SP4093 (7)
  • SP61EJ (17)
  • SPADAP (4)
  • SPB400 (10)
  • SPN4W2 (2)
  • SPSREJ (11)
  • THM (63)
  • THM-X (30)
  • THMF-X (32)
  • TN10P (93)
  • TN10U (71)
  • TN15M (83)
  • TN15U (69)
  • TN2000 (60)
  • TN20K (96)
  • TN20P (100)
  • TN30M (87)
  • TN30P (83)
  • TN4000 (58)
  • TN5015 (83)
  • TN5020 (74)
  • TN5105 (66)
  • TN5120 (82)
  • TN6010 (53)
  • TN6025 (70)
  • TN7005 (44)
  • TN7010 (93)
  • TN7015 (93)
  • TN7025 (93)
  • TN7035 (81)
  • TN7105 (44)
  • TN7110 (82)
  • TN7115 (82)
  • TN7125 (85)
  • TN7135 (81)
  • TN8025 (78)
  • TTI15 (34)
  • TTM09 (26)
  • TTR (31)
  • TTR-X (2)
  • TTS (53)
  • TTX (33)
  • W00342 (4)
  • WBH10C (64)
  • WBH10P (28)
  • WBH10U (53)
  • WBH20P (68)
  • WBH25P (49)
  • WBH25U (57)
  • WBH30P (28)
  • WBK40U (32)
  • WBK45U (40)
  • WDN00U (19)
  • WDN25U (36)
  • WK05CT (98)
  • WK15CT (66)
  • WK20CT (102)
  • WM15CT (98)
  • WM25CT (98)
  • WM35CT (94)
  • WP05CT (15)
  • WP15CT (102)
  • WP20TT (4)
  • WP25CT (102)
  • WP35CT (102)
  • WS10PT (85)
  • WS25PT (94)
  • WU05PT (2)
  • WU10HT (101)
  • WU10PT (68)
  • WU25PT (67)
  • X00511 (11)
Hand Of Tool
  • L (28)
  • N (5)
  • R (29)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.626 (2)
  • 1.874 (2)
  • 2.252 (2)
  • 2.48 (16)
  • 2.756 (41)
  • 3.15 (8)
  • 3.386 (2)
  • 3.5 (2)
  • 3.543 (4)
  • 3.937 (11)
  • 4.094 (2)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 41.3 (2)
  • 47.6 (2)
  • 57.2 (2)
  • 63.0 (16)
  • 70.0 (41)
  • 80.0 (8)
  • 86.0 (2)
  • 88.9 (2)
  • 90.0 (4)
  • 100.0 (11)
  • 104.0 (2)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (10)
to
Maximum Axial Groove Diameter
  • 393.661 (10)
to
Cutting Direction
  • E (9)
  • S (53)
Rake Angle Style
  • DOUBLE NEGATIVE (46)
  • DOUBLE POSITIVE (1)
  • NEGATIVE-ZERO (6)
  • NEUTRAL (ZERO) (8)
  • POSITIVE-NEGATIVE (1)
Maximum Bore Depth
  • 50.0 (84)
to
Maximum Bore Depth
  • 1.969 (84)
to
Boring Bar Material
  • S (4)
Wiper Insert
  • N (137)
  • Y (44)
frontEnd
Adapter Front-End
  • CARTRIDGE MOUNT (4)
  • CUTOFF SUPPORT BLADE (2)
Clamp Style
  • C (2)
  • M (67)
  • N (22)
  • P (32)
  • S (19)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (25)
  • D-DIAMOND/RHOMBIC 55 (29)
  • LT-TRIANGLE LAY DOWN THREAD 60 (15)
  • R-ROUND (6)
  • S-SQUARE 90 (39)
  • T-TRIANGLE 60 (5)
  • TN-TOP NOTCH (10)
  • V-DIAMOND/RHOMBIC 35 (9)
  • W-TRIGON 80 (4)
Front End Type
  • KMC - Cartridge Mount Kenna (4)
  • PMK - Prismatic Adapter Kenna (2)
Cutting Width
  • 1.0 (6)
  • 1.19 (3)
  • 1.194 (6)
  • 1.2 (6)
  • 1.5 (6)
  • 1.57 (6)
  • 1.575 (6)
  • 1.75 (6)
  • 1.829 (6)
  • 1.981 (6)
  • 2.0 (6)
  • 2.2 (6)
  • 2.235 (6)
  • 2.24 (3)
  • 2.25 (3)
  • 2.388 (6)
  • 2.39 (3)
  • 2.464 (6)
  • 2.5 (6)
  • 2.667 (6)
  • 2.743 (6)
  • 2.75 (6)
  • 2.794 (6)