successfully added to cart
View Cart

Unidades de corte interno KM32TS™

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Facing Facing (18)
  • Grooving Grooving (1)
  • ID Grooving ID Grooving (1)
  • ID Thread Turning ID Thread Turning (5)
  • Multiple Direction Cutting Multiple Direction Cutting (18)
  • Profiling Profiling (17)
  • TRN Boring TRN Boring (17)
  • Threading Threading (5)
  • Turning Turning (18)
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (22)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (22)
  • M Stainless Steel (22)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (22)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (22)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (22)
  • K Cast Iron (22)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (22)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (22)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (22)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum
      (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (22)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (22)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (22)
    • N6
      Carbon, Graphite Composites, CFRP
      (22)
    • N7
      MMC's
      (22)
  • S High-Temp Alloys (22)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (22)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (22)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (22)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (22)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC
      (22)
    • H2
      Hardened Materials 48-55 HRC
      (19)
    • H3
      Hardened Materials 56-60 HRC
      (18)
    • H4
      Hardened Materials >60 HRC
      (18)
Type of Thread
  • 55 (3)
  • 60 (4)
  • ACME (2)
  • API RD (2)
  • BSPT (3)
  • BSW (3)
  • BUTTRESS (1)
  • M (3)
  • NPT (3)
  • NPTF (3)
  • RD DIN 405 (2)
  • STUB ACME (2)
  • TR DIN 103 (2)
  • UN (4)
  • UNJ (3)
Cutting Condition
  • Heavily Interrupted Cut (19)
  • Interrupted (4)
  • Lightly Interrupted Cut (19)
  • Smooth Cut (19)
  • Varying Depth of Cut (19)
Cutting Condition Material
  • H-All (12)
  • K-All (19)
  • K1 (3)
  • M-All (19)
  • N-All (19)
  • P-All (19)
  • S-All (19)
  • S2 (4)
  • S4 (18)
Tool Cutting Edge Angle
  • 90.0 (4)
  • 93.0 (6)
  • 95.0 (12)
to
Cutting Edges Per Insert
  • 1.0 (19)
  • 2.0 (19)
  • 3.0 (3)
  • 4.0 (13)
  • 8.0 (3)
to
cornerConfiguration
Corner Radius
  • 0.03 (1)
  • 0.033 (1)
  • 0.038 (1)
  • 0.051 (3)
  • 0.056 (1)
  • 0.07 (2)
  • 0.076 (2)
  • 0.08 (2)
  • 0.081 (1)
  • 0.089 (1)
  • 0.09 (1)
  • 0.097 (1)
  • 0.1 (14)
  • 0.102 (6)
  • 0.108 (1)
  • 0.152 (2)
  • 0.16 (1)
  • 0.19 (1)
  • 0.191 (1)
  • 0.2 (19)
  • 0.203 (11)
  • 0.21 (2)
  • 0.225 (1)
  • 0.397 (13)
  • 0.4 (18)
  • 0.406 (1)
  • 0.5 (1)
  • 0.7 (1)
  • 0.75 (1)
  • 0.787 (1)
  • 0.792 (3)
  • 0.794 (11)
  • 0.8 (18)
  • 0.936 (1)
  • 1.0 (1)
  • 1.19 (5)
  • 1.191 (4)
  • 1.194 (1)
  • 1.2 (9)
  • 1.25 (1)
  • 1.5 (1)
  • 1.587 (3)
  • 1.588 (5)
  • 1.6 (4)
  • 1.75 (1)
  • 2.381 (1)
to
Corner Radius
  • 0.0012 (1)
  • 0.0013 (1)
  • 0.0015 (1)
  • 0.002 (3)
  • 0.0028 (2)
  • 0.003 (2)
  • 0.0031 (1)
  • 0.0032 (1)
  • 0.0035 (1)
  • 0.0038 (1)
  • 0.004 (15)
  • 0.0043 (1)
  • 0.006 (2)
  • 0.0063 (1)
  • 0.0075 (1)
  • 0.008 (19)
  • 0.0083 (5)
  • 0.0089 (1)
  • 0.0156 (18)
  • 0.016 (4)
  • 0.0197 (1)
  • 0.022 (1)
  • 0.0276 (1)
  • 0.0295 (1)
  • 0.031 (5)
  • 0.0312 (11)
  • 0.0313 (18)
  • 0.0315 (3)
  • 0.0369 (1)
  • 0.0394 (1)
  • 0.0469 (9)
  • 0.047 (7)
  • 0.0472 (3)
  • 0.0492 (1)
  • 0.0591 (1)
  • 0.0625 (5)
  • 0.063 (3)
  • 0.0689 (1)
  • 0.0938 (1)
  • 0.1563 (3)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (4)
  • 241 (3)
  • CG5 (5)
  • CL4 (3)
  • CM1 (5)
  • CM2 (4)
  • CM3 (3)
  • CM4 (3)
  • CPX (4)
  • CW2 (3)
  • CW2015 (4)
  • CW5025 (4)
  • GX (3)
  • HCK20 (1)
  • HCM15 (1)
  • HK1500 (3)
  • HT2 (3)
  • HTX (3)
  • K060 (4)
  • K090 (4)
  • K1 (3)
  • K10M (4)
  • K10P (4)
  • K10U (4)
  • K15 (3)
  • K15U (4)
  • K20K (4)
  • K21 (3)
  • K25M (4)
  • K25P (4)
  • K2885 (1)
  • K313 (19)
  • K35P (1)
  • K420 (5)
  • K45 (4)
  • K4H (1)
  • K68 (21)
  • KB1340 (3)
  • KB1345 (6)
  • KB1610 (15)
  • KB1625 (6)
  • KB1630 (11)
  • KB5610 (13)
  • KB5625 (9)
  • KB5630 (9)
  • KB9610 (14)
  • KB9640 (3)
  • KBH10 (4)
  • KBH10B (4)
  • KBH20 (4)
  • KBH20B (4)
  • KBK35 (3)
  • KC210 (4)
  • KC250 (9)
  • KC5010 (21)
  • KC5025 (22)
  • KC5410 (19)
  • KC5510 (4)
  • KC5525 (4)
  • KC710 (9)
  • KC720 (22)
  • KC722 (6)
  • KC730 (22)
  • KC7310 (8)
  • KC732 (18)
  • KC8050 (18)
  • KC810 (19)
  • KC850 (19)
  • KC9010 (15)
  • KC9025 (18)
  • KC910 (19)
  • KC9105 (15)
  • KC9110 (19)
  • KC9120 (15)
  • KC9125 (18)
  • KC9140 (4)
  • KC9145 (4)
  • KC9215 (4)
  • KC9225 (18)
  • KC9240 (18)
  • KC9240NEW (18)
  • KC9245 (4)
  • KC9315 (18)
  • KC9320 (16)
  • KC9325 (15)
  • KC935 (19)
  • KC950 (16)
  • KC990 (18)
  • KCD25 (15)
  • KCK05 (18)
  • KCK05B (6)
  • KCK15 (15)
  • KCK15B (15)
  • KCK20 (19)
  • KCK20B (19)
  • KCM15 (18)
  • KCM15B (13)
  • KCM25 (18)
  • KCM25B (15)
  • KCM35 (11)
  • KCM35B (3)
  • KCP05 (18)
  • KCP05B (4)
  • KCP10 (18)
  • KCP10B (19)
  • KCP25 (18)
  • KCP25B (19)
  • KCP30 (18)
  • KCP30B (4)
  • KCP40 (4)
  • KCP40B (4)
  • KCPK05 (8)
  • KCS10 (17)
  • KCS10B (18)
  • KCU10 (19)
  • KCU25 (19)
  • KD050 (15)
  • KD081 (4)
  • KD100 (18)
  • KD105 (9)
  • KD120 (15)
  • KD1400 (18)
  • KD1405 (18)
  • KD1425 (18)
  • KM1 (3)
  • KMF (3)
  • KT1120 (3)
  • KT125 (8)
  • KT150 (8)
  • KT175 (19)
  • KT315 (19)
  • KT325 (3)
  • KTP10 (15)
  • KU10 (9)
  • KU10T (19)
  • KU25T (3)
  • KU30T (16)
  • KY1310 (4)
  • KY1320 (4)
  • KY1540 (4)
  • KY1615 (4)
  • KY2000 (4)
  • KY2100 (4)
  • KY3000 (4)
  • KY3400 (4)
  • KY3500 (4)
  • KY4000 (3)
  • KY4300 (4)
  • KY4400 (4)
  • KYHK15B (4)
  • KYK10 (4)
  • KYK25 (4)
  • KYK35 (4)
  • KYS25 (4)
  • KYS30 (4)
  • NL200 (3)
  • NL250 (4)
  • NL300 (3)
  • NL400 (3)
  • NL920 (4)
  • P25 (5)
  • PB100 (3)
  • PB170 (3)
  • PB250 (3)
  • PB300 (3)
  • PS5 (3)
  • SP0819 (3)
  • SP3019 (3)
  • SP4019 (4)
  • SP4066 (1)
  • THM (4)
  • THM-X (3)
  • THMF-X (3)
  • TN10P (5)
  • TN10U (4)
  • TN15M (4)
  • TN15U (4)
  • TN2000 (3)
  • TN20K (4)
  • TN20P (4)
  • TN30M (4)
  • TN30P (4)
  • TN4000 (3)
  • TN5015 (3)
  • TN5020 (3)
  • TN5105 (4)
  • TN5120 (4)
  • TN6010 (5)
  • TN6025 (7)
  • TN7005 (4)
  • TN7010 (4)
  • TN7015 (4)
  • TN7025 (4)
  • TN7035 (3)
  • TN7105 (3)
  • TN7110 (4)
  • TN7115 (4)
  • TN7125 (3)
  • TN7135 (3)
  • TN8025 (4)
  • TTI15 (3)
  • TTR (3)
  • TTS (3)
  • TTX (3)
  • W00162 (4)
  • WBH10C (9)
  • WBH10P (13)
  • WBH10U (13)
  • WBH20P (4)
  • WBH25P (16)
  • WBH25U (4)
  • WBH30P (13)
  • WBK40U (3)
  • WBK45U (4)
  • WDN00U (18)
  • WDN25U (18)
  • WK05CT (4)
  • WK15CT (3)
  • WK20CT (15)
  • WM15CT (16)
  • WM25CT (13)
  • WM35CT (4)
  • WP05CT (3)
  • WP15CT (13)
  • WP25CT (18)
  • WP35CT (4)
  • WS10PT (4)
  • WS25PT (4)
  • WU10HT (4)
  • WU10PT (4)
  • WU25PT (3)
  • X00511 (3)
Hand Of Tool
  • L (10)
  • R (12)
Minimum Axial Groove Diameter
  • 0.5118 (3)
  • 0.6299 (1)
  • 0.63 (2)
  • 0.7283 (1)
  • 0.7874 (2)
  • 0.9843 (5)
  • 1.2598 (7)
  • 1.26 (1)
to
Minimum Axial Groove Diameter
  • 13.0 (3)
  • 16.0 (3)
  • 18.5 (1)
  • 20.0 (2)
  • 25.0 (5)
  • 32.0 (8)
to
Maximum Axial Groove Diameter
  • 9999.0 (1)
to
Maximum Axial Groove Diameter
  • 393.661 (1)
to
Cutting Direction
  • B (13)
  • E (5)
  • S (4)
Rake Angle Style
  • DOUBLE NEGATIVE (4)
  • DOUBLE POSITIVE (3)
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (7)
  • POSITIVE-ZERO (6)
Maximum Bore Depth
  • 35.0 (3)
  • 42.0 (2)
  • 43.21 (2)
  • 56.0 (2)
  • 58.0 (4)
  • 60.0 (6)
  • 75.0 (3)
to
Maximum Bore Depth
  • 1.378 (3)
  • 1.6535 (1)
  • 1.654 (1)
  • 1.701 (2)
  • 2.2047 (2)
  • 2.2835 (4)
  • 2.362 (2)
  • 2.3622 (4)
  • 2.9528 (2)
  • 2.953 (1)
to
Wiper Insert
  • N (22)
  • Y (18)
frontEnd
Clamp Style
  • M (6)
  • N (1)
  • S (15)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (12)
  • D-DIAMOND/RHOMBIC 55 (6)
  • LT-TRIANGLE LAY DOWN THREAD 60 (3)
  • TN-TOP NOTCH (1)
Cutting Width
  • 0.5 (1)
  • 0.787 (1)
  • 0.8 (1)
  • 0.889 (1)
  • 0.991 (1)
  • 1.0 (1)
  • 1.041 (1)
  • 1.19 (1)
  • 1.194 (1)
  • 1.2 (1)
  • 1.39 (1)
  • 1.397 (1)
  • 1.4 (1)
  • 1.473 (1)
  • 1.5 (1)
  • 1.57 (1)
  • 1.575 (1)
  • 1.69 (1)
  • 1.7 (1)
  • 1.702 (1)
  • 1.75 (1)
  • 1.94 (1)
  • 1.95 (1)
  • 1.956 (1)
  • 2.0 (1)
  • 2.007 (1)
  • 2.2 (1)
  • 2.235 (1)
  • 2.24 (1)
  • 2.25 (1)
  • 2.388 (1)
  • 2.5 (1)
  • 2.74 (1)
  • 2.743 (1)
  • 2.75 (1)
  • 2.997 (1)
  • 3.0 (1)
  • 3.175 (1)
  • 3.18 (1)
  • 3.2 (1)
  • 3.245 (1)
  • 3.251 (1)
  • 3.27 (1)
  • 3.5 (1)
  • 3.81 (1)
  • 3.84 (1)
to
Cutting Width
  • 0.0197 (1)
  • 0.031 (1)
  • 0.0315 (1)
  • 0.035 (1)
  • 0.039 (1)
  • 0.0394 (1)
  • 0.041 (1)
  • 0.047 (1)
  • 0.0472 (1)
  • 0.055 (1)
  • 0.0551 (1)
  • 0.058 (1)
  • 0.0591 (1)
  • 0.062 (1)
  • 0.0669 (1)
  • 0.067 (1)
  • 0.0689 (1)
  • 0.076 (1)
  • 0.0768 (1)
  • 0.077 (1)
  • 0.0787 (1)
  • 0.079 (1)
  • 0.0866 (1)
  • 0.088 (1)
  • 0.0886 (1)
  • 0.094 (1)
  • 0.0984 (1)
  • 0.108 (1)
  • 0.1083 (1)
  • 0.118 (1)
  • 0.1181 (1)
  • 0.125 (1)
  • 0.126 (1)
  • 0.1278 (1)
  • 0.128 (1)
  • 0.129 (1)
  • 0.1378 (1)
  • 0.15 (1)
  • 0.151 (1)
to
Insert Size
  • 2 (1)
Maximum Cutting Depth
  • 3.0 (3)
  • 3.18 (1)
  • 4.5 (3)
to
Maximum Cutting Depth
  • 0.1181 (3)
  • 0.1252 (1)
  • 0.1772 (3)
to
insertGeometry
Cutting Tool Material
  • B H (15)
  • B L (18)
  • C A (4)
  • C N (4)
  • D P (18)
  • H T (19)
  • H W (22)
backEnd
System Size
  • KM32 (19)
  • KM32TS (3)
Back-End Diameter
  • 1.258 (1)
  • 1.2598 (21)
to
other
Tool Unit
  • I (1)
  • M (22)
Over All Length [L]
  • 50.0 (3)
  • 60.0 (4)
  • 70.0 (7)
  • 80.0 (5)
  • 90.0 (3)
to
Over All Length [L]
  • 1.9685 (3)
  • 2.362 (2)
  • 2.3622 (2)
  • 2.7559 (6)
  • 2.756 (1)
  • 3.1496 (5)
  • 3.5433 (3)
to
Insert Hand
  • L (2)
  • N (18)
  • R (2)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • Mango —  KM-TS  ISO 26622Mango — KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Refrigeración —  Con refrigeración interna  100 bar (1500 psi)  máximoRefrigeración — Con refrigeración interna 100 bar (1500 psi) máximo
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1023729 KM32TSS25EMCLNR12 KM32TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 CN..120408/CN..432    
    List price:
    $364.32 /each.
    Your price::
    Qty
    1023841 KM32TSS25EMCLNL12 KM32TSS25EMCLNL12 32.0000 1.260 17.0000 .6690 60.0000 2.362 70.0000 2.756 CNMA120408/CNMA432 0.28 0.61
      List price:
      $364.32 /each.
      Your price::
      Qty
      1023866 KM32TSS25GMCLNR12 KM32TSS25GMCLNR12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
        List price:
        $364.32 /each.
        Your price::
        Qty
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        Qty

        Sold in pkg. of

        ORIGINAL PRODUCT

        • Mango —  KM-TS  ISO 26622Mango — KM-TS ISO 26622
        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
        • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
        • Refrigeración —  Con refrigeración interna  100 bar (1500 psi)  máximoRefrigeración — Con refrigeración interna 100 bar (1500 psi) máximo
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
        1144614 KM32TSS10CSCLPR06 KM32TSS10CSCLPR06 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 CP..060204/CP..2151    
          List price:
          $341.35 /each.
          Your price::
          Qty
          1144615 KM32TSS10CSCLPL06 KM32TSS10CSCLPL06 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 CP..060204/CP..2151    
            List price:
            $341.35 /each.
            Your price::
            Qty
            1144616 KM32TSS12DSCLPR06 KM32TSS12DSCLPR06 16.0000 .6300 9.0000 .3540 43.2100 1.701 60.0000 2.362 CP..060204/CP..2151 0.13 0.29
              List price:
              $341.35 /each.
              Your price::
              Qty
              1144617 KM32TSS12DSCLPL06 KM32TSS12DSCLPL06 16.0000 .6300 9.0000 .3540 43.2100 1.701 60.0000 2.362 CP..060204/CP..2151 0.13 0.29
                List price:
                $341.35 /each.
                Your price::
                Qty
                1144618 KM32TSS16ESCLPR09 KM32TSS16ESCLPR09 20.0000 .7874 11.0000 .4331 56.0000 2.204 70.0000 2.755 CP..09T308/CP..3252    
                  List price:
                  $341.35 /each.
                  Your price::
                  Qty
                  1144619 KM32TSS16ESCLPL09 KM32TSS16ESCLPL09 20.0000 .7874 11.0000 .4331 56.0000 2.204 70.0000 2.755 CP..09T308/CP..3252