successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (39)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (39)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (39)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (39)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (39)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (39)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (39)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (39)
  • M Stainless Steel (39)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (39)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (39)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (39)
  • K Cast Iron (39)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (39)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (39)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (39)
  • N Non-Ferrous Materials (39)
    • N1
      Wrought Aluminum
      (39)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (39)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (33)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (39)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (33)
    • N6
      Carbon, Graphite Composites, CFRP
      (33)
    • N7
      MMC's
      (33)
  • S High-Temp Alloys (39)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (39)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (39)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (39)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (39)
  • H Hardened Materials (33)
    • H1
      Hardened Materials 44-48 HRC
      (33)
    • H2
      Hardened Materials 48-55 HRC
      (33)
    • H3
      Hardened Materials 56-60 HRC
      (33)
    • H4
      Hardened Materials >60 HRC
      (33)
Applications
  • Back Boring Back Boring (39)
  • Facing Facing (1)
  • Multiple Direction Cutting Multiple Direction Cutting (39)
  • Profiling Profiling (39)
  • TRN Boring TRN Boring (39)
  • Turning Turning (1)
Cutting Condition
  • Heavily Interrupted Cut (39)
  • Lightly Interrupted Cut (39)
  • Smooth Cut (39)
  • Varying Depth of Cut (39)
Tool Cutting Edge Angle
  • 90.0 (8)
  • 93.0 (14)
  • 95.0 (17)
to
Connection Style
  • Boring Bar Shank (39)
Cutting Edges Per Insert
  • 1.0 (33)
  • 2.0 (23)
  • 3.0 (8)
  • 4.0 (25)
  • 6.0 (14)
  • 8.0 (11)
to
cornerConfiguration
Corner Radius
  • 0.1 (22)
  • 0.102 (14)
  • 0.2 (28)
  • 0.397 (30)
  • 0.4 (36)
  • 0.6 (5)
  • 0.794 (35)
  • 0.8 (39)
  • 1.191 (29)
  • 1.2 (39)
  • 1.588 (3)
  • 1.6 (30)
  • 2.4 (3)
to
Corner Radius
  • 0.004 (22)
  • 0.008 (28)
  • 0.0156 (36)
  • 0.0312 (29)
  • 0.0313 (39)
  • 0.0315 (8)
  • 0.0469 (39)
  • 0.0472 (8)
  • 0.0625 (30)
  • 0.0938 (3)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • CW2015 (33)
  • CW5025 (36)
  • HK1500 (23)
  • PB100 (8)
  • PB170 (8)
  • PB250 (8)
  • PB300 (8)
  • THM (15)
  • THM-X (8)
  • THMF-X (14)
  • TN10P (39)
  • TN10U (35)
  • TN15M (39)
  • TN15U (35)
  • TN2000 (23)
  • TN20K (39)
  • TN20P (39)
  • TN30M (39)
  • TN30P (30)
  • TN4000 (23)
  • TN5015 (24)
  • TN5020 (24)
  • TN5105 (27)
  • TN5120 (30)
  • TN6010 (22)
  • TN6025 (19)
  • TN7005 (19)
  • TN7010 (30)
  • TN7015 (30)
  • TN7025 (30)
  • TN7035 (24)
  • TN7105 (20)
  • TN7110 (24)
  • TN7115 (30)
  • TN7125 (24)
  • TN7135 (24)
  • TN8025 (31)
  • TTI15 (8)
  • TTM09 (8)
  • TTR (10)
  • TTS (15)
  • TTX (16)
  • WBH10C (22)
  • WBH10P (22)
  • WBH10U (28)
  • WBH25P (28)
  • WBH25U (20)
  • WBH30P (22)
  • WBK40U (8)
  • WBK45U (20)
  • WDN00U (14)
  • WDN25U (33)
  • WK05CT (39)
  • WK15CT (20)
  • WK20CT (39)
  • WM15CT (39)
  • WM25CT (39)
  • WM35CT (39)
  • WP05CT (13)
  • WP15CT (39)
  • WP25CT (39)
  • WP35CT (39)
  • WS10PT (39)
  • WS25PT (39)
  • WU10HT (39)
Hand Of Tool
  • L (17)
  • R (22)
Wiper Insert
  • N (39)
  • Y (20)
Minimum Axial Groove Diameter
  • 0.93 (1)
  • 1.22 (1)
  • 1.2598 (2)
  • 1.26 (2)
  • 1.4567 (1)
  • 1.457 (1)
  • 1.47 (2)
  • 1.5748 (1)
  • 1.575 (5)
  • 1.705 (4)
  • 1.76 (2)
  • 1.9685 (2)
  • 1.969 (3)
  • 2.0 (4)
  • 2.48 (2)
  • 2.4803 (4)
  • 2.5 (2)
to
Minimum Axial Groove Diameter
  • 23.622 (1)
  • 30.988 (1)
  • 32.0 (4)
  • 37.0 (2)
  • 37.34 (2)
  • 40.0 (6)
  • 43.307 (2)
  • 43.31 (2)
  • 44.704 (2)
  • 50.0 (5)
  • 50.8 (4)
  • 63.0 (6)
  • 63.5 (2)
to
Cutting Direction
  • B (17)
  • E (22)
Rake Angle Style
  • DOUBLE NEGATIVE (39)
Maximum Bore Depth
  • 76.2 (1)
  • 100.0 (6)
  • 101.6 (1)
  • 126.8 (2)
  • 127.0 (4)
  • 128.0 (6)
  • 152.4 (6)
  • 160.0 (5)
  • 200.0 (6)
  • 203.2 (2)
to
Maximum Bore Depth
  • 3.0 (1)
  • 3.92 (3)
  • 3.9372 (3)
  • 4.0 (1)
  • 5.0 (6)
  • 5.0392 (1)
  • 5.04 (5)
  • 6.0 (6)
  • 6.28 (1)
  • 6.2992 (2)
  • 6.3 (2)
  • 7.874 (2)
  • 7.876 (2)
  • 7.88 (2)
  • 8.0 (2)
to
Boring Bar Material
  • S (39)
frontEnd
Clamp Style
  • M (39)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (11)
  • D-DIAMOND/RHOMBIC 55 (6)
  • T-TRIANGLE 60 (8)
  • V-DIAMOND/RHOMBIC 35 (8)
  • W-TRIGON 80 (6)
insertGeometry
Cutting Tool Material
  • B H (28)
  • B L (28)
  • C A (33)
  • C N (39)
  • D P (33)
  • H T (8)
  • H W (39)
backEnd
Connection Type
  • BORING BAR (39)
Back-End Diameter
  • 0.75 (1)
  • 0.98 (3)
  • 0.9843 (3)
  • 1.0 (1)
  • 1.25 (6)
  • 1.2598 (1)
  • 1.26 (5)
  • 1.5 (6)
  • 1.57 (1)
  • 1.5748 (2)
  • 1.575 (2)
  • 1.9685 (2)
  • 1.969 (2)
  • 1.97 (2)
  • 2.0 (2)
to
Back-End Diameter
  • 19.05 (1)
  • 25.0 (6)
  • 25.4 (1)
  • 31.7 (2)
  • 31.75 (4)
  • 32.0 (6)
  • 38.1 (6)
  • 40.0 (5)
  • 50.0 (6)
  • 50.8 (2)
to
other
Grade
  • WG (39)
Platform
  • M-Style Clamping (13)
Tool Unit
  • I (16)
  • M (23)
Over All Length [L]
  • 200.0 (6)
  • 250.0 (6)
  • 254.0 (1)
  • 300.0 (5)
  • 304.8 (1)
  • 350.0 (6)
  • 355.6 (12)
  • 406.4 (2)
to
Over All Length [L]
  • 7.874 (6)
  • 9.8425 (1)
  • 9.843 (5)
  • 10.0 (1)
  • 11.811 (5)
  • 12.0 (1)
  • 13.7795 (2)
  • 13.78 (4)
  • 14.0 (12)
  • 16.0 (2)
to
Insert Hand
  • N (39)
obsoleteFacet
  • true (39)
  • false (12)
Cutting Condition Material
  • H-All (30)
  • K-All (39)
  • M-All (39)
  • N-All (33)
  • P-All (39)
  • S-All (39)
No filters matching ""
View Products in
Metric
Inch
Boring Bars

Clamping System M
(6 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
2951390 A12SMWLNR3 A12SMWLNR3 WG 19.05 .75 23.6220 .9300 12.7000 .5000 254.0000 10.000 4.0010 .1575 1/8-27 NPT WN..332 5/64 3/32
    2951398 A16TMWLNR4 A16TMWLNR4 WG 25.4 1.0 30.9880 1.220 16.2560 .6400 304.8000 12.000     1/4-18 NPT WN..432 3/32 1/8
      2951406 A20UMWLNL4 A20UMWLNL4 WG 31.7 1.25 37.3400 1.470 19.4300 .7650 355.6000 14.000     1/4-18 NPT WN..432 3/32 1/8
        2951407 A20UMWLNR4 A20UMWLNR4 WG 31.7 1.25 37.3400 1.470 19.4300 .7650 355.6000 14.000     1/4-18 NPT WN..432 3/32 1/8
          2951416 A24UMWLNL4 A24UMWLNL4 WG 38.1 1.5 44.7040 1.760 22.6060 .8900 355.6000 14.000     1/4-18 NPT WN..432 3/32 1/8
            2951417 A24UMWLNR4 A24UMWLNR4 WG 38.1 1.5 44.7040 1.760 22.6060 .8900 355.6000 14.000     1/4-18 NPT WN..432 3/32 1/8
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              Boring Bars

              Clamping System M
              (6 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
              2951403 A20UMDUNL4 A20UMDUNL4 WG 31.75 1.25 43.3100 1.705 25.4000 1.000 355.6000 14.000 1/4-18 NPT -5.000 DN..432 3/32 5/32
                2951404 A20UMDUNR4 A20UMDUNR4 WG 31.75 1.25 43.3100 1.705 25.4000 1.000 355.6000 14.000 1/4-18 NPT -5.000 DN..432 3/32 5/32
                  2951411 A24UMDUNL4 A24UMDUNL4 WG 38.1 1.5 50.8000 2.000 28.4480 1.120 355.6000 14.000 1/4-18 NPT -5.000 DN..432 3/32 5/32
                    2951412 A24UMDUNR4 A24UMDUNR4 WG 38.1 1.5 50.8000 2.000 28.4480 1.120 355.6000 14.000 1/4-18 NPT -5.000 DN..432 3/32 5/32
                      2951422 A32VMDUNL4 A32VMDUNL4 WG 50.8 2.0 63.5000 2.500 34.7980 1.370 406.4000 16.000 1/4-18 NPT -5.000 DN..432 3/32 5/32
                        2951423 A32VMDUNR4 A32VMDUNR4 WG 50.8 2.0 63.5000 2.500 34.7980 1.370 406.4000 16.000 1/4-18 NPT -5.000 DN..432 3/32 5/32
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          Internal Boring Toolholders

                          Clamping System M
                          (4 Products)
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
                          3883411 A20UMVUNL3 A20UMVUNL3 WG 31.75 1.25 43.3070 1.705 25.4000 1.000 355.6000 14.000 1/4-18 NPT -5.000 VN..332 5/64 5/32
                            3883412 A20UMVUNR3 A20UMVUNR3 WG 31.75 1.25 43.3070 1.705 25.4000 1.000 355.6000 14.000 1/4-18 NPT -5.000 VN..332 5/64 5/32
                              3883413 A24UMVUNL3 A24UMVUNL3 WG 38.1 1.5 50.8000 2.000 28.5750 1.125 355.6000 14.000 1/4-18 NPT -5.000 VN..332 5/64 5/32
                                3883414 A24UMVUNR3 A24UMVUNR3 WG 38.1 1.5 50.8000 2.000 28.5750 1.125 355.6000 14.000 1/4-18 NPT -5.000 VN..332 5/64 5/32
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  Bohrstangen für die Innenbearbeitung

                                  Spannsystem M
                                  (11 Products)
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [CS] Coolant Supply Size Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
                                  3852645 A25RMCLNL12 A25RMCLNL12 WG 25.0 .9843 32.0000 1.259 17.0000 .6693 200.0000 7.874 33.0000 1.299 1/4-18 NPT CN..120408 2 mm 3 mm
                                    3852644 A25RMCLNR12 A25RMCLNR12 WG 25.0 .9843 32.0000 1.259 17.0000 .6693 200.0000 7.874 33.0000 1.299 1/4-18 NPT CN..120408 2 mm 3 mm
                                      3852647 A32SMCLNL12 A32SMCLNL12 WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843     1/4-18 NPT CN..120408 2.5 mm 3 mm
                                        3852646 A32SMCLNR12 A32SMCLNR12 WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843     1/4-18 NPT CN..120408 2.5 mm 3 mm
                                          3852649 A40TMCLNL12 A40TMCLNL12 WG 40.0 1.575 50.0000 1.969 27.0000 1.063 300.0000 11.811     1/4-18 NPT CN..120408 2.5 mm 3 mm
                                            3852648 A40TMCLNR12 A40TMCLNR12 WG 40.0 1.575 50.0000 1.969 27.0000 1.063 300.0000 11.811     1/4-18 NPT CN..120408 2.5 mm 3 mm
                                              List price:
                                              Discount: %
                                              Your price::
                                              Replacement This item is not available
                                              Replacement Product This item may be available through a distributor
                                              Qty
                                              Bohrstangen

                                              Spannsystem M
                                              (8 Products)
                                              View Products
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
                                              3852681 A25RMTFNL16 A25RMTFNL16 WG 25.0 .98 32.0000 1.260 17.0000 .6690 200.0000 7.874 6.4000 .2520 1/4-18 NPT TN..160408 2 mm 3 mm
                                                3852682 A25RMTFNR16 A25RMTFNR16 WG 25.0 .98 32.0000 1.260 17.0000 .6690 200.0000 7.874 6.4000 .2520 1/4-18 NPT TN..160408 2 mm 3 mm
                                                  3852683 A32SMTFNL16 A32SMTFNL16 WG 32.0 1.259 40.0000 1.574 22.0000 .8661 250.0000 9.842     1/4-18 NPT TN..160408 2 mm 3 mm
                                                    3852684 A32SMTFNR16 A32SMTFNR16 WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 6.4000 .2520 1/4-18 NPT TN..160408 2 mm 3 mm
                                                      3852685 A40TMTFNL16 A40TMTFNL16 WG 40.0 1.574 50.0000 1.968 27.0000 1.063 300.0000 11.811     1/4-18 NPT TN..160408 2 mm 3 mm
                                                        3852686 A40TMTFNR16 A40TMTFNR16 WG 40.0 1.574 50.0000 1.968 27.0000 1.063 300.0000 11.811     1/4-18 NPT TN..160408 2 mm 3 mm
                                                          List price:
                                                          Discount: %
                                                          Your price::
                                                          Replacement This item is not available
                                                          Replacement Product This item may be available through a distributor
                                                          Qty
                                                          Bohrstangen für die Innenbearbeitung

                                                          Spannsystem M
                                                          (4 Products)
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
                                                          3852689 A25RMVUNL16 A25RMVUNL16 WG 25.0 .9843 37.0000 1.456 22.0000 .8661 200.0000 7.874 1/4-18 NPT -5.000 VN..160408 2 mm 3 mm
                                                            3852690 A25RMVUNR16 A25RMVUNR16 WG 25.0 .98 37.0000 1.457 22.0000 .8660 200.0000 7.874 1/4-18 NPT -5.000 VN..160408 2 mm 3 mm
                                                              3852691 A32SMVUNL16 A32SMVUNL16 WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT -5.000 VN..160408 2 mm 3 mm
                                                                3852692 A32SMVUNR16 A32SMVUNR16 WG 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT -5.000 VN..160408 2 mm 3 mm
                                                                  List price:
                                                                  Discount: %
                                                                  Your price::
                                                                  Replacement This item is not available
                                                                  Replacement Product This item may be available through a distributor
                                                                  Qty
                                                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                  You are about to create a duplicate . Do you want to proceed?
                                                                  You are about to delete Do you want to proceed?
                                                                  What would you like to rename your to?
                                                                  Please enter a valid name
                                                                  Please enter a name for the duplicate
                                                                  Please enter a valid name
                                                                  You are about to add to your My Solutions page. Do you want to proceed?
                                                                  Please enter a valid name
                                                                  Send a copy of

                                                                  Please enter a valid Email
                                                                  Please enter a valid name

                                                                  We have found the following CAD Drawings

                                                                  Select the files you are looking for and download them all at once

                                                                  You should be logged to see your dashboard information
                                                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                  item(s) successfully added to the cart
                                                                  View Cart