WMT Wendeschneidplatten
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
-
P Steel (217)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(217)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(217)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(217)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(217)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(217)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(217)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(217)
-
-
M Stainless Steel (201)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(201)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(201)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(201)
-
-
K Cast Iron (217)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(217)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(217)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(217)
-
-
N Non-Ferrous Materials (201)
-
N1Wrought Aluminum(201)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(201)
-
N3High-Silicon Aluminum Alloys Si >12.2%(201)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass(201)
-
N6Carbon, Graphite Composites, CFRP(201)
-
-
S High-Temp Alloys (201)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(201)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(201)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(201)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(201)
-
-
H Hardened Materials (74)
-
H1Hardened Materials 44-48 HRC(74)
-
H2Hardened Materials 48-55 HRC(74)
-
Select First Choice
-
DE (141)
-
IN (45)
-
US (59)
Applications
-
Cut-Off (226)
-
Face Grooving (226)
-
Grooving (226)
-
ID Grooving (226)
-
ID Thread Turning (226)
-
OD Thread Turning (226)
-
Profiling (226)
Cutting Condition
-
Heavily Interrupted Cut (126)
-
Lightly Interrupted Cut (126)
-
Smooth Cut (89)
Cutting Edges Per Insert
-
2.0 (228)
to
Corner Radius
-
0.08 (14)
-
0.13 (6)
-
0.15 (8)
-
0.17 (22)
-
0.23 (2)
-
0.25 (10)
-
0.26 (2)
-
0.3 (38)
-
0.31 (14)
-
0.38 (2)
-
0.58 (2)
-
0.59 (4)
-
0.6 (25)
-
0.61 (22)
-
0.75 (10)
-
0.76 (6)
-
1.5 (9)
-
1.525 (3)
-
1.588 (2)
-
2.0 (3)
-
2.025 (3)
-
2.388 (2)
-
2.5 (2)
-
2.525 (3)
-
3.0 (2)
-
3.025 (3)
-
3.175 (2)
-
3.962 (2)
-
4.0 (2)
-
4.025 (3)
to
Corner Radius
-
0.003 (14)
-
0.005 (6)
-
0.006 (8)
-
0.007 (22)
-
0.009 (2)
-
0.01 (12)
-
0.012 (52)
-
0.015 (2)
-
0.023 (6)
-
0.024 (47)
-
0.03 (16)
-
0.059 (6)
-
0.0591 (3)
-
0.06 (3)
-
0.0625 (2)
-
0.0787 (3)
-
0.0797 (3)
-
0.094 (2)
-
0.0984 (2)
-
0.0994 (3)
-
0.1181 (2)
-
0.1191 (3)
-
0.125 (2)
-
0.156 (2)
-
0.1575 (2)
-
0.1585 (3)
to
application
Drilling Condition
-
Heavily Interrupted Cut (126)
-
Lightly Interrupted Cut (126)
-
Smooth Cut (89)
Grade Of Cutting Tool
-
WP10CT (16)
-
WP25CT (11)
-
WU10HT (11)
-
WU10PT (74)
-
WU25PT (116)
Wiper Insert
-
N (211)
-
Y (17)
frontEnd
Insert Shape
-
PRISMATIC (228)
Cutting Width
-
1.5 (5)
-
1.99 (2)
-
2.0 (9)
-
2.13 (4)
-
2.38 (4)
-
2.39 (6)
-
3.0 (24)
-
3.13 (15)
-
3.17 (10)
-
3.18 (6)
-
3.95 (2)
-
3.96 (2)
-
4.0 (20)
-
4.13 (15)
-
4.76 (2)
-
4.77 (6)
-
4.78 (2)
-
5.0 (13)
-
5.13 (15)
-
6.0 (10)
-
6.12 (3)
-
6.13 (12)
-
6.32 (2)
-
6.34 (2)
-
6.35 (4)
-
6.36 (2)
-
7.92 (4)
-
7.94 (2)
-
8.0 (10)
-
8.13 (15)
to
Cutting Width
-
0.059 (5)
-
0.079 (11)
-
0.084 (4)
-
0.094 (10)
-
0.118 (24)
-
0.123 (15)
-
0.125 (16)
-
0.156 (4)
-
0.157 (17)
-
0.158 (3)
-
0.163 (15)
-
0.188 (10)
-
0.197 (13)
-
0.202 (15)
-
0.236 (10)
-
0.241 (15)
-
0.249 (2)
-
0.25 (8)
-
0.312 (6)
-
0.315 (10)
-
0.32 (15)
to
insertGeometry
Shape
-
PRISMATIC (228)
Insert Seat Size
-
1 (5)
-
2 (15)
-
2B (10)
-
3 (55)
-
4 (39)
-
5 (38)
-
6 (35)
-
8 (31)
Cutting Tool Material
-
H W (226)
other
Grade
-
WP10CT (16)
-
WP25CT (11)
-
WU10HT (11)
-
WU10PT (74)
-
WU25PT (116)
Platform
-
WMT (228)
Tool Unit
-
I (102)
-
M (192)
Insert Hand
-
L (10)
-
N (198)
-
R (20)
Drilling Condition Material
-
H-All (204)
-
K-All (27)
-
M-All (188)
-
N-All (204)
-
P-All (142)
-
S-All (204)
Cutting Condition Material
-
H-All (204)
-
K-All (27)
-
M-All (188)
-
N-All (204)
-
P-All (142)
-
S-All (204)
No filters matching ""
View Products in
Metric
Inch
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Hand of Tool | Insert Size | |
|---|---|---|---|---|---|---|---|
| 4169671 | WMTC015L05CM08 | WMTC015L05CM08 | WU25PT | L | 1 |
|
|
| 4169668 | WMTC015N00CM08 | WMTC015N00CM08 | WU25PT | N | 1 |
|
|
| 4169670 | WMTC015R05CM08 | WMTC015R05CM08 | WU25PT | R | 1 |
|
|
| 4169672 | WMTC015R12CM08 | WMTC015R12CM08 | WU25PT | R | 1 |
|
|
| 4169677 | WMTC020L05CM08 | WMTC020L05CM08 | WU25PT | L | 2 |
|
|
| 4169680 | WMTC020L12CM08 | WMTC020L12CM08 | WU25PT | L | 2 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
WMT-CM-W-Wendeschneidplatten
Wendeschneidplatten mit Wiper zum Abstechdrehen • WMT-CM-W
(17 Products)
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Hand of Tool | Insert Size | |
|---|---|---|---|---|---|---|---|
| 4169669 | WMTC015N00CMW08 | WMTC015N00CMW08 | WU25PT | N | 1 |
|
|
| 4169681 | WMTC020L12CMW08 | WMTC020L12CMW08 | WU25PT | L | 2 |
|
|
| 4169674 | WMTC020N00CMW08 | WMTC020N00CMW08 | WU25PT | N | 2 |
|
|
| 4169676 | WMTC020R05CMW08 | WMTC020R05CMW08 | WU25PT | R | 2 |
|
|
| 4169679 | WMTC020R12CMW08 | WMTC020R12CMW08 | WU25PT | R | 2 |
|
|
| 4169687 | WMTC030L05CMW17 | WMTC030L05CMW17 | WU25PT | L | 3 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
WMT-P-PC-Wendeschneidplatten
Wendeschneidplatten zum Eintauchen und Profildrehen • WMT-P-PC • Präzision
(20 Products)
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Insert Size | [W] Cutting Width | [W] Cutting Width | |
|---|---|---|---|---|---|---|---|---|
| 4170119 | WMTR188I5PPC | WMTR188I5PPC | WU10PT | 5 | 4.7800 | .1880 |
|
|
| 4170120 | WMTR188I5PPC | WMTR188I5PPC | WU25PT | 5 | 4.7800 | .1880 |
|
|
| 4170121 | WMTR250I6PPC | WMTR250I6PPC | WU10PT | 6 | 6.3600 | .2500 |
|
|
| 4170122 | WMTR250I6PPC | WMTR250I6PPC | WU25PT | 6 | 6.3600 | .2500 |
|
|
| 4170170 | WMTR300M3PPC | WMTR300M3PPC | WU10PT | 3 | 3.0000 | .1180 |
|
|
| 4170171 | WMTR300M3PPC | WMTR300M3PPC | WU25PT | 3 | 3.0000 | .1180 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
WMT-U-PC-Wendeschneidplatten
Wendeschneidplatten zum Eintauchen und Profildrehen • WMT-U-PC • Gepresst
(15 Products)
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Insert Size | [W] Cutting Width | [W] Cutting Width | |
|---|---|---|---|---|---|---|---|---|
| 4170172 | WMTR305M3UPC | WMTR305M3UPC | WU10PT | 3 | 3.1300 | .1230 |
|
|
| 4170173 | WMTR305M3UPC | WMTR305M3UPC | WU25PT | 3 | 3.1300 | .1230 |
|
|
| 4170174 | WMTR305M3UPC | WMTR305M3UPC | WP10CT | 3 | 3.1300 | .1230 |
|
|
| 4170177 | WMTR405M4UPC | WMTR405M4UPC | WU10PT | 4 | 4.1300 | .1630 |
|
|
| 4170178 | WMTR405M4UPC | WMTR405M4UPC | WU25PT | 4 | 4.1300 | .1630 |
|
|
| 4170182 | WMTR505M5UPC | WMTR505M5UPC | WU10PT | 5 | 5.1300 | .2020 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
WMT-P-PT-Wendeschneidplatten
Wendeschneidplatten für das Einstechdrehen und Drehen • WMT-P-PT • Präzision
(41 Products)
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Insert Size | [W] Cutting Width | [W] Cutting Width | |
|---|---|---|---|---|---|---|---|---|
| 4118584 | WMTS094I2BP04PT | WMTS094I2BP04PT | WU25PT | 2B | 2.3800 | .0940 |
|
|
| 4118585 | WMTS125I3P03PT | WMTS125I3P03PT | WU10PT | 3 | 3.1700 | .1250 |
|
|
| 4118586 | WMTS125I3P03PT | WMTS125I3P03PT | WU25PT | 3 | 3.1700 | .1250 |
|
|
| 4118588 | WMTS125I3P08PT | WMTS125I3P08PT | WU25PT | 3 | 3.1700 | .1250 |
|
|
| 4118590 | WMTS188I5P03PT | WMTS188I5P03PT | WU25PT | 5 | 4.7600 | .1880 |
|
|
| 4118591 | WMTS188I5P08PT | WMTS188I5P08PT | WU10PT | 5 | 4.7700 | .1880 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
WMT-P-PH • Präzision
Wendeschneidplatten für das Einstechdrehen und Drehen • WMT-P-PH • Präzision
(46 Products)
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Insert Size | [W] Cutting Width | [W] Cutting Width | |
|---|---|---|---|---|---|---|---|---|
| 5345914 | WMTS125I3P03PH | WMTS125I3P03PH | WU10PT | 3 | 3.1800 | .1250 |
|
|
| 5291300 | WMTS125I3P03PH | WMTS125I3P03PH | WU25PT | 3 | 3.1800 | .1250 |
|
|
| 5345915 | WMTS125I3P08PH | WMTS125I3P08PH | WU10PT | 3 | 3.1800 | .1250 |
|
|
| 5331093 | WMTS125I3P08PH | WMTS125I3P08PH | WU25PT | 3 | 3.1800 | .1250 |
|
|
| 5345980 | WMTS188I5P03PH | WMTS188I5P03PH | WU10PT | 5 | 4.7700 | .1880 |
|
|
| 5331095 | WMTS188I5P03PH | WMTS188I5P03PH | WU25PT | 5 | 4.7700 | .1880 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
WMT-U-PT-Wendeschneidplatten
Wendeschneidplatten für das Einstechdrehen und Drehen • WMT-U-PT • Gepresst
(44 Products)
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Insert Size | [W] Cutting Width | [W] Cutting Width | |
|---|---|---|---|---|---|---|---|---|
| 4116131 | WMTS205M2U02PT | WMTS205M2U02PT | WU10PT | 2 | 2.1300 | .0840 |
|
|
| 4116132 | WMTS205M2U02PT | WMTS205M2U02PT | WU25PT | 2 | 2.1300 | .0840 |
|
|
| 4169554 | WMTS205M2U02PT | WMTS205M2U02PT | WP10CT | 2 | 2.1300 | .0840 |
|
|
| 4169555 | WMTS205M2U02PT | WMTS205M2U02PT | WP25CT | 2 | 2.1300 | .0840 |
|
|
| 4113568 | WMTS305M3U03PT | WMTS305M3U03PT | WU10PT | 3 | 3.1300 | .1230 |
|
|
| 4113569 | WMTS305M3U03PT | WMTS305M3U03PT | WU25PT | 3 | 3.1300 | .1230 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
WMT-U-PH • Matrize
Wendeschneidplatten für das Einstechdrehen und Drehen • WMT-U-PH • Gepresst
(20 Products)
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Insert Size | [W] Cutting Width | [W] Cutting Width | |
|---|---|---|---|---|---|---|---|---|
| 5346392 | WMTS305M3U03PH | WMTS305M3U03PH | WU10PT | 3 | 3.1300 | .1230 |
|
|
| 5346393 | WMTS305M3U03PH | WMTS305M3U03PH | WU25PT | 3 | 3.1300 | .1230 |
|
|
| 5346394 | WMTS305M3U06PH | WMTS305M3U06PH | WU10PT | 3 | 3.1300 | .1230 |
|
|
| 5346395 | WMTS305M3U06PH | WMTS305M3U06PH | WU25PT | 3 | 3.1300 | .1230 |
|
|
| 5346396 | WMTS405M4U03PH | WMTS405M4U03PH | WU10PT | 4 | 4.1300 | .1630 |
|
|
| 5346397 | WMTS405M4U03PH | WMTS405M4U03PH | WU25PT | 4 | 4.1300 | .1630 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
.png)
