Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

Integral-Klemmhalter

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (252)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (252)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (252)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (252)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (252)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (252)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (252)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (252)
  • M Stainless Steel (252)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (252)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (252)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (252)
  • K Cast Iron (252)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (252)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (252)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (252)
  • N Non-Ferrous Materials (252)
    • N1
      Wrought Aluminum
      (252)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (252)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (252)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (252)
    • N6
      Carbon, Graphite Composites, CFRP
      (252)
  • S High-Temp Alloys (252)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (252)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (252)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (252)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (252)
  • H Hardened Materials (232)
    • H1
      Hardened Materials 44-48 HRC
      (232)
    • H2
      Hardened Materials 48-55 HRC
      (232)
Select First Choice
  • CN (40)
  • DE (73)
  • IN (27)
  • US (27)
Applications
  • Back Boring Back Boring (34)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (32)
  • Blind Hole Finishing Blind Hole Finishing (32)
  • Chamfer Turning Chamfer Turning (34)
  • Cut-Off Cut-Off (111)
  • Deep Grooving Deep Grooving (2)
  • Face Grooving Face Grooving (88)
  • Facing Facing (2)
  • Grooving Grooving (244)
  • ID Facing ID Facing (34)
  • ID Grooving ID Grooving (34)
  • ID Thread Turning ID Thread Turning (34)
  • Multiple Direction Cutting Multiple Direction Cutting (242)
  • OD Thread Turning OD Thread Turning (34)
  • Plunge Turning Plunge Turning (34)
  • Profiling Profiling (34)
  • TRN Boring TRN Boring (34)
  • Threading Threading (32)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (32)
  • Through Hole Finishing Through Hole Finishing (32)
  • Turning Turning (2)
Cutting Condition
  • Heavily Interrupted Cut (252)
  • Lightly Interrupted Cut (252)
  • Smooth Cut (232)
  • Varying Depth of Cut (232)
Tool Cutting Edge Angle
  • 90.0 (277)
to
Connection Style
  • Boring Bar Shank (32)
  • Toolholder (245)
Cutting Edges Per Insert
  • 2.0 (254)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.076 (2)
  • 0.08 (56)
  • 0.13 (19)
  • 0.15 (55)
  • 0.17 (81)
  • 0.23 (55)
  • 0.25 (151)
  • 0.26 (44)
  • 0.3 (177)
  • 0.31 (81)
  • 0.38 (19)
  • 0.58 (36)
  • 0.59 (36)
  • 0.6 (177)
  • 0.61 (141)
  • 0.75 (177)
  • 0.76 (135)
  • 1.5 (71)
  • 1.525 (55)
  • 2.0 (26)
  • 2.025 (26)
  • 2.388 (44)
  • 2.5 (44)
  • 2.525 (44)
  • 3.0 (36)
  • 3.025 (36)
  • 3.175 (36)
  • 3.962 (16)
  • 4.0 (16)
  • 4.025 (16)
to
Corner Radius
  • 0.003 (58)
  • 0.005 (19)
  • 0.006 (55)
  • 0.007 (81)
  • 0.009 (55)
  • 0.01 (151)
  • 0.012 (177)
  • 0.015 (19)
  • 0.023 (36)
  • 0.024 (177)
  • 0.03 (177)
  • 0.059 (16)
  • 0.0591 (55)
  • 0.06 (55)
  • 0.0787 (26)
  • 0.0797 (26)
  • 0.094 (44)
  • 0.0984 (44)
  • 0.0994 (44)
  • 0.1181 (36)
  • 0.1191 (36)
  • 0.125 (36)
  • 0.156 (16)
  • 0.1575 (16)
  • 0.1585 (16)
to
application
Grade Of Cutting Tool
  • TN6026 (2)
  • WP10CT (213)
  • WP25CT (213)
  • WU10HT (125)
  • WU10PT (232)
  • WU25PT (252)
Hand Of Tool
  • L (137)
  • R (140)
Wiper Insert
  • N (254)
  • Y (156)
Minimum Axial Groove Diameter
  • 1.2598 (1)
  • 1.4961 (6)
  • 1.5 (6)
  • 1.59 (4)
  • 1.614 (4)
  • 1.85 (16)
  • 2.0 (6)
  • 2.0472 (7)
  • 2.126 (4)
  • 2.13 (4)
  • 2.75 (12)
  • 2.7559 (13)
  • 3.937 (12)
  • 4.0 (12)
to
Minimum Axial Groove Diameter
  • 32.0 (1)
  • 38.0 (6)
  • 38.1 (6)
  • 40.39 (4)
  • 41.0 (4)
  • 46.99 (8)
  • 47.0 (8)
  • 50.8 (6)
  • 52.0 (7)
  • 54.0 (4)
  • 54.1 (4)
  • 69.85 (12)
  • 70.0 (13)
  • 100.0 (12)
  • 101.6 (12)
to
Maximum Axial Groove Diameter
  • 20.0 (16)
  • 25.999 (8)
  • 26.0 (10)
  • 26.97 (2)
  • 26.975 (2)
  • 28.575 (2)
  • 31.75 (2)
  • 32.0 (4)
  • 50.8 (6)
  • 52.0 (7)
  • 69.85 (6)
  • 70.0 (7)
  • 100.0 (13)
  • 101.6 (12)
  • 203.2 (12)
  • 205.0 (12)
to
Maximum Axial Groove Diameter
  • 0.7874 (16)
  • 1.0236 (16)
  • 1.024 (2)
  • 1.062 (4)
  • 1.125 (2)
  • 1.25 (2)
  • 1.26 (4)
  • 2.0 (6)
  • 2.0472 (7)
  • 2.75 (6)
  • 2.7559 (7)
  • 3.937 (13)
  • 4.0 (12)
  • 8.0 (12)
  • 8.0709 (12)
to
Cutting Direction
  • E (245)
  • S (32)
Rake Angle Style
  • NEGATIVE-ZERO (32)
  • NEUTRAL (ZERO) (2)
Maximum Bore Depth
  • 50.0 (8)
  • 64.0 (14)
  • 64.4 (2)
  • 80.0 (4)
  • 84.0 (2)
  • 84.4 (2)
to
Maximum Bore Depth
  • 1.97 (8)
  • 2.52 (14)
  • 2.54 (2)
  • 3.15 (4)
  • 3.31 (2)
  • 3.32 (2)
to
Boring Bar Material
  • S (32)
frontEnd
Clamp Style
  • C (14)
  • S (4)
  • Y (235)
Insert Shape
  • PRISMATIC (277)
Cutting Width
  • 1.5 (20)
  • 1.99 (36)
  • 2.0 (38)
  • 2.13 (36)
  • 2.38 (19)
  • 2.39 (19)
  • 3.0 (55)
  • 3.13 (55)
  • 3.17 (55)
  • 3.18 (55)
  • 3.95 (26)
  • 3.96 (26)
  • 4.0 (26)
  • 4.13 (26)
  • 4.76 (44)
  • 4.77 (44)
  • 4.78 (44)
  • 5.0 (44)
  • 5.13 (44)
  • 6.0 (36)
  • 6.12 (36)
  • 6.13 (36)
  • 6.32 (36)
  • 6.34 (36)
  • 6.35 (36)
  • 6.36 (36)
  • 7.92 (16)
  • 7.94 (16)
  • 8.0 (16)
  • 8.13 (16)
to
Cutting Width
  • 0.059 (20)
  • 0.0787 (2)
  • 0.079 (36)
  • 0.084 (36)
  • 0.094 (19)
  • 0.118 (55)
  • 0.123 (55)
  • 0.125 (55)
  • 0.156 (26)
  • 0.157 (26)
  • 0.158 (26)
  • 0.163 (26)
  • 0.188 (44)
  • 0.197 (44)
  • 0.202 (44)
  • 0.236 (36)
  • 0.241 (36)
  • 0.249 (36)
  • 0.25 (36)
  • 0.312 (16)
  • 0.315 (16)
  • 0.32 (16)
to
Maximum Cutting Depth
  • 10.0 (16)
  • 10.668 (2)
  • 10.67 (1)
  • 11.0 (12)
  • 11.176 (6)
  • 11.18 (5)
  • 12.5 (1)
  • 12.7 (2)
  • 12.9995 (8)
  • 13.0 (12)
  • 13.485 (2)
  • 13.4875 (2)
  • 14.0 (14)
  • 14.22 (8)
  • 14.224 (6)
  • 14.2875 (2)
  • 15.0 (1)
  • 15.5 (3)
  • 15.875 (11)
  • 15.88 (2)
  • 15.883 (1)
  • 16.0 (20)
  • 16.5 (8)
  • 16.51 (8)
  • 18.5 (2)
  • 19.0 (26)
  • 19.05 (24)
  • 19.06 (1)
  • 19.431 (2)
  • 20.0 (1)
  • 22.0 (19)
  • 22.22 (4)
  • 22.225 (4)
  • 23.97 (6)
  • 25.0 (12)
  • 25.39 (1)
  • 25.4 (22)
to
Maximum Cutting Depth
  • 0.3937 (16)
  • 0.42 (3)
  • 0.433 (10)
  • 0.4331 (2)
  • 0.44 (11)
  • 0.4921 (1)
  • 0.5 (2)
  • 0.5118 (18)
  • 0.512 (2)
  • 0.531 (4)
  • 0.551 (13)
  • 0.5512 (1)
  • 0.56 (14)
  • 0.5625 (2)
  • 0.5906 (1)
  • 0.6102 (3)
  • 0.625 (12)
  • 0.6252 (2)
  • 0.6299 (8)
  • 0.63 (12)
  • 0.65 (16)
  • 0.7283 (2)
  • 0.748 (26)
  • 0.75 (25)
  • 0.765 (2)
  • 0.787 (1)
  • 0.866 (19)
  • 0.875 (8)
  • 0.944 (6)
  • 0.984 (9)
  • 0.9843 (3)
  • 0.9996 (1)
  • 1.0 (22)
to
Insert Size
  • 1 (20)
  • 2 (32)
  • 2B (21)
  • 3 (57)
  • 4 (32)
  • 5 (53)
  • 6 (42)
  • 8 (16)
insertGeometry
Cutting Tool Material
  • H W (254)
backEnd
Connection Type
  • BORING BAR (32)
  • SQUARE SHANK (239)
Back-End Diameter
  • 0.98 (4)
  • 1.0 (4)
  • 1.25 (8)
  • 1.26 (8)
  • 1.5 (4)
  • 1.57 (4)
to
Back-End Diameter
  • 25.0 (4)
  • 25.4 (4)
  • 31.7 (1)
  • 31.75 (7)
  • 32.0 (8)
  • 38.1 (4)
  • 40.0 (4)
to
other
Grade
  • W (1)
  • WG (48)
Platform
  • WMT (276)
Tool Unit
  • I (138)
  • M (139)
Over All Length [L]
  • 100.0 (14)
  • 114.3 (16)
  • 125.0 (36)
  • 127.0 (37)
  • 139.7 (4)
  • 140.0 (4)
  • 150.0 (69)
  • 152.4 (65)
  • 200.0 (4)
  • 203.2 (4)
  • 250.0 (8)
  • 254.0 (8)
  • 300.0 (3)
  • 300.15 (1)
  • 304.8 (4)
to
Over All Length [L]
  • 3.937 (14)
  • 4.5 (16)
  • 4.921 (28)
  • 4.9213 (8)
  • 5.0 (37)
  • 5.5 (4)
  • 5.5118 (1)
  • 5.512 (3)
  • 5.9055 (42)
  • 5.906 (27)
  • 6.0 (65)
  • 7.874 (4)
  • 8.0 (4)
  • 9.843 (8)
  • 10.0 (8)
  • 11.811 (3)
  • 11.817 (1)
  • 12.0 (4)
to
Insert Hand
  • L (137)
  • N (254)
  • R (156)
Display Obsolete Products
  • true (277)
  • false (206)
Category Path
Cutting Condition Material
  • H-All (252)
  • K-All (213)
  • M-All (252)
  • N-All (252)
  • P-All (252)
  • S-All (252)
No filters matching ""
View Products in
Metric
Inch
Einstechen und Abstechdrehen • WMT™

Integral-Klemmhalter • Integral-Klemmhalter zum Axial-Einstechen • Außenwölbung • Metrisch
(29 Products)
  • Face GroovingFace Grooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [W] Groove Width [W] Groove Width [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [FS] Secondary F Dimension [FS] Secondary F Dimension [CD] Cutting Depth [CD] Cutting Depth [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length
3653421 WMTBR2525M313-038-052 251217   WG 3 3.0000 .1181 24.8400 .9780 24.8400 .9780 23.5000 .9252 13.0000 .5118 52.0000 2.047 38.0000 1.496 32.1100 1.264 150.0000 5.905 34.1100 1.342
    3653422 WMTBL2525M313-038-052 251218   WG 3 3.0000 .1181 24.8400 .9780 24.8400 .9780 23.5000 .9252 13.0000 .5118 52.0000 2.047 38.0000 1.496 32.1100 1.264 150.0000 5.905 34.1100 1.342
      3653423 WMTBR2525M316-052-070 251219   WG 3 3.0000 .1181 24.8400 .9780 24.8400 .9780 23.5000 .9252 16.0000 .6299 70.0000 2.755 52.0000 2.047 32.1100 1.264 150.0000 5.905 34.1100 1.342
        3653424 WMTBL2525M316-052-070 251220   WG 3 3.0000 .1181 24.8400 .9780 24.8400 .9780 23.5000 .9252 16.0000 .6299 70.0000 2.755 52.0000 2.047 32.1100 1.264 150.0000 5.905 34.1100 1.342
          3653425 WMTBR2525M316-070-100 251221   WG 3 3.0000 .1181 24.8400 .9780 24.8400 .9780 23.5000 .9252 16.0000 .6299 100.0000 3.937 70.0000 2.755 32.1100 1.264 150.0000 5.905 34.1100 1.342
            3653426 WMTBL2525M316-070-100 251222   WG 3 3.0000 .1181 24.8400 .9780 24.8400 .9780 23.5000 .9252 16.0000 .6299 100.0000 3.937 70.0000 2.755 32.1100 1.264 150.0000 5.905 34.1100 1.342
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Einstechdrehen und Abstechdrehen • WMT™

              Integral-Halter • Integral-Halter zum Axial-Einstechen • Innenwölbung • Metrisch
              (10 Products)
              • Face GroovingFace Grooving
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [W] Groove Width [W] Groove Width [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [FS] Secondary F Dimension [FS] Secondary F Dimension [CD] Cutting Depth [CD] Cutting Depth [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length
              3634282 WMTAR2525M316-070-100 252209M   3 3.0000 .1181 24.8400 .9780 24.8400 .9780 23.5000 .9252 15.8800 .6252 100.0000 3.937 70.0000 2.755 32.0000 1.259 150.0000 5.905 34.1100 1.342
                3634284 WMTAR2525M319-100-205 252211M   3 3.0000 .1181 24.8400 .9780 24.8400 .9780 23.5000 .9252 19.0500 .7500 205.0000 8.070 100.0000 3.937 32.0000 1.259 150.0000 5.905 36.5300 1.438
                  3634285 WMTAL2525M319-100-205 252212M   3 3.0000 .1181 24.8400 .9780 24.8400 .9780 23.5000 .9252 19.0500 .7500 205.0000 8.070 100.0000 3.937 32.0000 1.259 150.0000 5.905 36.5300 1.438
                    3634283 WMTAL2525M316-070-100 252210M   3 3.0000 .1181 24.8400 .9780 24.8400 .9780 23.5000 .9252 15.8800 .6252 100.0000 3.937 70.0000 2.755 32.0000 1.259 150.0000 5.905 34.1100 1.342
                      3634286 WMTAR2525M519-070-100 252217M   5 5.0000 .1969 24.8400 .9780 24.8400 .9780 22.5000 .8858 19.0500 .7500 100.0000 3.937 70.0000 2.755 34.0000 1.338 150.0000 5.905 42.0400 1.655
                        3634287 WMTAL2525M519-070-100 252218M   5 5.0000 .1969 24.8400 .9780 24.8400 .9780 22.5000 .8858 19.0500 .7500 100.0000 3.937 70.0000 2.755 34.0000 1.338 150.0000 5.905 42.0400 1.655
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Einstechen und Abstechdrehen • WMT™

                          Integral-ID Einstech-Bohrstangen• Metrisch
                          (16 Products)
                          • I.D. GroovingI.D. Grooving
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [W] Groove Width [W] Groove Width [F] F Dimension [F] F Dimension [CD] Cutting Depth [CD] Cutting Depth [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia Clamp Screw ID Drive Size
                          5423882 A25RWMTEL0316M A25RWMTEL0316M   3 3.0000 .1180 26.0000 1.024 16.0000 .6300 25.0 .98 41.0000 1.614 200.0000 7.874 6.4000 .2500 5 mm
                            5423884 A25RWMTEL0416M A25RWMTEL0416M   4 4.0000 .1570 26.0000 1.024 16.0000 .6300 25.0 .98 41.0000 1.614 200.0000 7.874 6.4000 .2500 5 mm
                              5423874 A25RWMTER0316M A25RWMTER0316M   3 3.0000 .1180 26.0000 1.024 16.0000 .6300 25.0 .98 41.0000 1.614 200.0000 7.874 6.4000 .2500 5 mm
                                5423876 A25RWMTER0416M A25RWMTER0416M   4 4.0000 .1580 26.0000 1.024 16.0000 .6300 25.0 .98 41.0000 1.614 200.0000 7.874 6.4000 .2500 5 mm
                                  5423883 A32SWMTEL0319M A32SWMTEL0319M   3 3.0000 .1180 29.0000 1.142 19.0000 .7480 32.0 1.26 47.0000 1.850 250.0000 9.843 6.4000 .2500 5 mm
                                    5423885 A32SWMTEL0419M A32SWMTEL0419M   4 4.0000 .1570 29.0000 1.142 19.0000 .7480 32.0 1.26 47.0000 1.850 250.0000 9.843 6.4000 .2500 5 mm
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Grooving and Cut-Off • WMT™

                                      Integral Toolholders for Swiss-Style Machines • Inch
                                      (16 Products)
                                      • TurningTurning
                                      • Cut-OffCut-Off
                                      • ProfilingProfiling
                                      • GroovingGrooving
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [W] Groove Width [W] Groove Width [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [F] F Dimension [F] F Dimension [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length
                                      3656101 WMTCL081039 WMTCL081039   1 1.5010 .0591 12.7000 .5000 12.7000 .5000 20.0000 .7874 12.7000 .5000 19.0500 .7500 114.3000 4.500 21.3870 .8420
                                        3656142 WMTCL082039 WMTCL082039   2 1.9990 .0787 12.7000 .5000 12.7000 .5000 20.0000 .7874 12.7000 .5000 19.0500 .7500 114.3000 4.500 21.4120 .8430
                                          3656144 WMTCL102051 WMTCL102051   2 1.9990 .0787 15.8750 .6250 15.8750 .6250 25.9990 1.023 15.8750 .6250 23.4950 .9250 127.0000 5.000 24.2060 .9530
                                            3656146 WMTCL122051 WMTCL122051   2 2.0070 .0790 19.0500 .7500 19.0500 .7500 25.9990 1.023 19.0500 .7500 26.6700 1.050 127.0000 5.000 24.2060 .9530
                                              3656141 WMTCR082039 WMTCR082039   2 1.9990 .0787 12.7000 .5000 12.7000 .5000 20.0000 .7874 12.7000 .5000 19.0500 .7500 114.3000 4.500 21.4120 .8430
                                                3656133 WMTCR101051 WMTCR101051   1 1.5010 .0591 15.8750 .6250 15.8750 .6250 25.9990 1.023 15.9000 .6260 23.4950 .9250 127.0000 5.000 24.1810 .9520
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Einstechdrehen und Abstechdrehen • WMT™

                                                  Integral Klemmhalter für Feindrehmaschinen • Metrisch
                                                  (18 Products)
                                                  • TurningTurning
                                                  • Cut-OffCut-Off
                                                  • ProfilingProfiling
                                                  • GroovingGrooving
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [W] Groove Width [W] Groove Width [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length
                                                  3650509 WMTCL1010H110 WMTCL1010H110   1 1.5000 .0591 10.0000 .3937 10.0000 .3937 10.0000 .3937 20.0000 .7874 16.3500 .6437 100.0000 3.937 21.4000 .8425
                                                    3653414 WMTCL1010H210 WMTCL1010H210   2 2.0000 .0787 10.0000 .3937 10.0000 .3937 10.0000 .3937 20.0000 .7874 16.3500 .6437 100.0000 3.937 21.4100 .8429
                                                      3650511 WMTCL1212H110 WMTCL1212H110   1 1.5000 .0591 12.0000 .4724 12.0000 .4724 12.0000 .4724 20.0000 .7874 18.3500 .7224 100.0000 3.937 21.4000 .8425
                                                        3653416 WMTCL1212H210 WMTCL1212H210   2 2.0000 .0787 12.0000 .4724 12.0000 .4724 12.0000 .4724 20.0000 .7874 18.3500 .7224 100.0000 3.937 21.4100 .8429
                                                          3650513 WMTCL1616K113 WMTCL1616K113   1 1.5000 .0591 16.0000 .6299 15.8600 .6244 16.0000 .6299 26.0000 1.023 23.6200 .9299 125.0000 4.921 24.2000 .9528
                                                            3653418 WMTCL1616K213 WMTCL1616K213   2 2.0000 .0787 16.0000 .6299 15.8400 .6236 16.0000 .6299 26.0000 1.023 23.6200 .9299 125.0000 4.921 24.2100 .9531
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              Einstechdrehen und Abstechdrehen • WMT™

                                                              Integral Klemmhalter • Metrisch
                                                              (66 Products)
                                                              • TurningTurning
                                                              • Cut-OffCut-Off
                                                              • ProfilingProfiling
                                                              • GroovingGrooving
                                                              View Products
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [W] Groove Width [W] Groove Width [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [CD] Cutting Depth [CD] Cutting Depth [F] F Dimension [F] F Dimension [H3]Head Bottom Offset [H3]Head Bottom Offset [L1] Tool Length [L1] Tool Length [LS] Shank Length [LS] Shank Length
                                                              3539163 WMTCL1212H213 WMTCL1212H213