successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (18)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (18)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (18)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (18)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (18)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (18)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (18)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (18)
  • M Stainless Steel (18)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (18)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (18)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (18)
  • K Cast Iron (18)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (18)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (18)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (18)
  • N Non-Ferrous Materials (18)
    • N1
      Wrought Aluminum
      (18)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (18)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (18)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (18)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (18)
    • N6
      Carbon, Graphite Composites, CFRP
      (18)
    • N7
      MMC's
      (18)
  • S High-Temp Alloys (18)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (18)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (18)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (18)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (18)
  • H Hardened Materials (18)
    • H1
      Hardened Materials 44-48 HRC
      (18)
    • H2
      Hardened Materials 48-55 HRC
      (18)
    • H3
      Hardened Materials 56-60 HRC
      (12)
    • H4
      Hardened Materials >60 HRC
      (12)
Applications
  • Back Boring Back Boring (14)
  • Face Grooving Face Grooving (14)
  • Facing Facing (14)
  • Grooving Grooving (14)
  • ID Facing ID Facing (14)
  • ID Grooving ID Grooving (14)
  • ID Thread Turning ID Thread Turning (14)
  • Multiple Direction Cutting Multiple Direction Cutting (18)
  • OD Thread Turning OD Thread Turning (14)
  • Plunge Turning Plunge Turning (14)
  • Profiling Profiling (14)
  • TRN Boring TRN Boring (14)
  • Turning Turning (14)
Type of Thread
  • 60 (18)
  • ACME (12)
  • API (12)
  • API RD (8)
  • BSW (8)
  • BUTTRESS (18)
  • M (11)
  • NPT (8)
  • STUB ACME (8)
  • UN (18)
  • UNJ (8)
Cutting Condition
  • Heavily Interrupted Cut (18)
  • Lightly Interrupted Cut (18)
  • Smooth Cut (18)
  • Varying Depth of Cut (18)
Tool Cutting Edge Angle
  • 90.0 (18)
to
Cutting Edges Per Insert
  • 1.0 (18)
  • 2.0 (18)
to
cornerConfiguration
Corner Radius
  • 0.026 (4)
  • 0.051 (4)
  • 0.057 (4)
  • 0.066 (8)
  • 0.076 (18)
  • 0.08 (14)
  • 0.089 (10)
  • 0.09 (10)
  • 0.094 (8)
  • 0.097 (4)
  • 0.1 (14)
  • 0.102 (14)
  • 0.116 (4)
  • 0.117 (4)
  • 0.127 (8)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.15 (8)
  • 0.155 (8)
  • 0.157 (8)
  • 0.16 (4)
  • 0.165 (12)
  • 0.173 (8)
  • 0.178 (8)
  • 0.18 (3)
  • 0.185 (3)
  • 0.19 (18)
  • 0.191 (18)
  • 0.198 (8)
  • 0.2 (8)
  • 0.202 (11)
  • 0.224 (8)
  • 0.235 (8)
  • 0.244 (4)
  • 0.25 (8)
  • 0.251 (8)
  • 0.254 (12)
  • 0.255 (4)
  • 0.269 (8)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (8)
  • 0.315 (10)
  • 0.318 (12)
  • 0.33 (8)
  • 0.34 (8)
  • 0.343 (11)
  • 0.356 (8)
  • 0.404 (8)
  • 0.406 (8)
  • 0.43 (8)
  • 0.445 (12)
  • 0.472 (4)
  • 0.49 (8)
  • 0.5 (6)
  • 0.508 (8)
  • 0.565 (2)
  • 0.57 (4)
  • 0.572 (12)
  • 0.575 (8)
  • 0.75 (6)
  • 0.787 (14)
  • 0.902 (12)
  • 1.0 (14)
  • 1.194 (14)
  • 1.195 (4)
  • 1.25 (14)
  • 1.5 (14)
  • 1.585 (8)
  • 1.588 (18)
  • 1.59 (2)
  • 1.75 (14)
  • 1.98 (4)
  • 1.981 (8)
  • 2.0 (12)
  • 2.25 (12)
  • 2.388 (12)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (4)
  • 0.0023 (4)
  • 0.0026 (8)
  • 0.003 (18)
  • 0.0031 (14)
  • 0.0035 (10)
  • 0.0037 (8)
  • 0.0038 (4)
  • 0.004 (14)
  • 0.0046 (8)
  • 0.005 (8)
  • 0.0052 (8)
  • 0.0053 (8)
  • 0.0059 (8)
  • 0.006 (8)
  • 0.0062 (8)
  • 0.0065 (12)
  • 0.0068 (8)
  • 0.007 (8)
  • 0.0075 (18)
  • 0.0078 (8)
  • 0.0079 (4)
  • 0.008 (11)
  • 0.0088 (8)
  • 0.0093 (8)
  • 0.0096 (4)
  • 0.0099 (8)
  • 0.01 (12)
  • 0.0106 (8)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (8)
  • 0.0124 (8)
  • 0.0125 (12)
  • 0.013 (8)
  • 0.0135 (15)
  • 0.014 (8)
  • 0.0159 (8)
  • 0.016 (8)
  • 0.017 (8)
  • 0.0175 (12)
  • 0.0186 (4)
  • 0.0193 (8)
  • 0.0197 (6)
  • 0.02 (8)
  • 0.0225 (12)
  • 0.0295 (6)
  • 0.031 (14)
  • 0.0355 (12)
  • 0.0394 (14)
  • 0.047 (14)
  • 0.0492 (14)
  • 0.0591 (14)
  • 0.0625 (18)
  • 0.0689 (14)
  • 0.078 (8)
  • 0.0787 (12)
  • 0.0886 (12)
  • 0.094 (12)
  • 0.0984 (4)
  • 0.106 (4)
  • 0.125 (4)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (14)
  • K313 (18)
  • K420 (18)
  • K4H (11)
  • K68 (18)
  • KB1345 (12)
  • KB1630 (12)
  • KB5625 (8)
  • KC250 (14)
  • KC5010 (18)
  • KC5025 (18)
  • KC5410 (18)
  • KC710 (18)
  • KC720 (18)
  • KC722 (18)
  • KC730 (18)
  • KC732 (8)
  • KC810 (18)
  • KC850 (18)
  • KC910 (11)
  • KC9110 (18)
  • KC9120 (8)
  • KC9320 (18)
  • KC935 (18)
  • KC950 (18)
  • KCK20 (15)
  • KCK20B (18)
  • KCP10B (18)
  • KCP25B (18)
  • KCU10 (18)
  • KCU25 (18)
  • KD050 (4)
  • KD081 (8)
  • KD100 (10)
  • KD120 (12)
  • KD1425 (8)
  • KT175 (14)
  • KT315 (18)
  • KU10T (18)
  • KU25T (18)
  • KU30T (18)
  • KY3000 (12)
  • THM (14)
  • TN10P (13)
  • TN6010 (18)
  • TN6025 (18)
  • TN7110 (18)
  • WU10HT (4)
  • WU10PT (7)
  • WU25PT (4)
Wiper Insert
  • N (18)
Minimum Axial Groove Diameter
  • 0.748 (2)
  • 0.7874 (2)
  • 0.9449 (1)
  • 0.9646 (1)
  • 1.3386 (2)
  • 1.5157 (2)
  • 1.5748 (2)
  • 1.8898 (3)
  • 1.9094 (3)
to
Minimum Axial Groove Diameter
  • 19.0 (2)
  • 20.0 (2)
  • 24.0 (1)
  • 24.5 (1)
  • 34.0 (2)
  • 38.5 (2)
  • 40.0 (2)
  • 48.0 (3)
  • 48.5 (3)
to
Maximum Axial Groove Diameter
  • 9999.0 (18)
to
Maximum Axial Groove Diameter
  • 393.661 (18)
to
Maximum Bore Depth
  • 34.8 (2)
  • 48.84 (1)
  • 48.87 (1)
  • 62.0 (2)
  • 63.8 (2)
  • 80.0 (1)
  • 80.3 (1)
  • 83.29 (2)
  • 99.32 (2)
  • 105.6 (2)
  • 111.0 (1)
  • 111.02 (1)
to
Maximum Bore Depth
  • 1.3701 (2)
  • 1.9228 (1)
  • 1.924 (1)
  • 2.4409 (2)
  • 2.5118 (2)
  • 3.1496 (1)
  • 3.1614 (1)
  • 3.279 (2)
  • 3.91 (2)
  • 4.1575 (2)
  • 4.3701 (1)
  • 4.3709 (1)
to
frontEnd
Clamp Style
  • N (18)
Insert Shape
  • TN-TOP NOTCH (18)
Cutting Width
  • 0.5 (6)
  • 0.787 (6)
  • 0.8 (6)
  • 0.889 (6)
  • 0.991 (6)
  • 1.0 (14)
  • 1.041 (6)
  • 1.19 (10)
  • 1.194 (14)
  • 1.199 (3)
  • 1.2 (14)
  • 1.39 (6)
  • 1.397 (6)
  • 1.4 (6)
  • 1.473 (6)
  • 1.5 (14)
  • 1.56 (3)
  • 1.57 (11)
  • 1.575 (14)
  • 1.69 (6)
  • 1.7 (6)
  • 1.702 (6)
  • 1.75 (14)
  • 1.829 (8)
  • 1.94 (6)
  • 1.95 (6)
  • 1.956 (6)
  • 1.981 (8)
  • 2.0 (14)
  • 2.007 (6)
  • 2.2 (14)
  • 2.235 (14)
  • 2.24 (10)
  • 2.25 (10)
  • 2.388 (14)
  • 2.39 (4)
  • 2.464 (8)
  • 2.5 (14)
  • 2.667 (8)
  • 2.74 (6)
  • 2.743 (14)
  • 2.75 (14)
  • 2.794 (8)
  • 2.997 (14)
  • 3.0 (18)
  • 3.099 (8)
  • 3.17 (8)
  • 3.175 (18)
  • 3.18 (5)
  • 3.2 (18)
  • 3.245 (6)
  • 3.25 (8)
  • 3.251 (14)
  • 3.27 (6)
  • 3.32 (4)
  • 3.329 (4)
  • 3.5 (18)
  • 3.607 (8)
  • 3.73 (3)
  • 3.81 (6)
  • 3.84 (6)
  • 3.96 (8)
  • 3.962 (8)
  • 3.974 (4)
  • 3.988 (8)
  • 4.0 (12)
  • 4.24 (4)
  • 4.242 (12)
  • 4.25 (4)
  • 4.3 (8)
  • 4.5 (12)
  • 4.521 (8)
  • 4.699 (10)
  • 4.775 (12)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (8)
  • 4.801 (12)
  • 4.81 (8)
  • 4.88 (4)
  • 4.95 (8)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)
to
Cutting Width
  • 0.0197 (6)
  • 0.031 (6)
  • 0.0315 (6)
  • 0.035 (6)
  • 0.039 (6)
  • 0.0394 (14)
  • 0.041 (6)
  • 0.047 (14)
  • 0.0472 (14)
  • 0.055 (6)
  • 0.0551 (6)
  • 0.058 (6)
  • 0.0591 (14)
  • 0.062 (14)
  • 0.0669 (6)
  • 0.067 (6)
  • 0.0689 (14)
  • 0.072 (8)
  • 0.076 (6)
  • 0.0768 (6)
  • 0.077 (6)
  • 0.078 (8)
  • 0.0787 (14)
  • 0.079 (10)
  • 0.0866 (14)
  • 0.088 (14)
  • 0.0886 (10)
  • 0.094 (14)
  • 0.097 (8)
  • 0.0984 (14)
  • 0.105 (8)
  • 0.108 (14)
  • 0.1083 (14)
  • 0.11 (8)
  • 0.118 (14)
  • 0.1181 (18)
  • 0.122 (8)
  • 0.125 (18)
  • 0.126 (18)
  • 0.1278 (6)
  • 0.128 (14)
  • 0.129 (6)
  • 0.131 (4)
  • 0.1378 (18)
  • 0.142 (8)
  • 0.147 (3)
  • 0.15 (6)
  • 0.151 (6)
  • 0.156 (8)
  • 0.157 (8)
  • 0.1574 (12)
  • 0.1575 (12)
  • 0.167 (12)
  • 0.1673 (4)
  • 0.169 (8)
  • 0.1771 (12)
  • 0.1772 (12)
  • 0.178 (8)
  • 0.185 (10)
  • 0.188 (12)
  • 0.189 (12)
  • 0.192 (4)
  • 0.195 (8)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.219 (4)
  • 0.2362 (4)
  • 0.25 (4)
  • 0.255 (4)
to
Maximum Cutting Depth
  • 3.51 (5)
  • 5.33 (8)
  • 7.47 (4)
to
Maximum Cutting Depth
  • 0.1382 (5)
  • 0.2098 (4)
  • 0.21 (4)
  • 0.2941 (4)
to
Insert Size
  • 2 (6)
  • 3 (8)
  • 4 (4)
insertGeometry
Cutting Tool Material
  • B H (12)
  • B L (8)
  • C N (12)
  • D P (10)
  • H T (18)
  • H W (18)
backEnd
Back-End Diameter
  • 2.4803 (18)
to
Back-End Diameter
  • 63.0 (18)
to
other
Platform
  • PSC63 (18)
Tool Unit
  • M (18)
Over All Length [L]
  • 70.0 (2)
  • 80.0 (2)
  • 90.0 (2)
  • 100.0 (2)
  • 110.0 (4)
  • 125.0 (2)
  • 140.0 (4)
to
Over All Length [L]
  • 2.7559 (2)
  • 3.1496 (2)
  • 3.5433 (2)
  • 3.937 (2)
  • 4.3307 (4)
  • 4.9213 (2)
  • 5.5118 (4)
to
Insert Hand
  • L (9)
  • R (9)
Cutting Condition Material
  • H-All (18)
  • K-All (18)
  • M-All (18)
  • N-All (18)
  • P-All (18)
  • S-All (18)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
PSC63

Internal Cutting Units • Threading and Grooving
(18 Products)
  • Shank - PSCShank - PSC
  • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6348941 PSC63S12ENEL2 PSC63S12ENEL2 12.0000 .4724 70.0000 2.755 34.8000 1.370 11.0000 .4331 19.0000 .7480 NG2R 0.87
    6348917 PSC63S12ENER2 PSC63S12ENER2 12.0000 .4724 70.0000 2.755 34.8000 1.370 11.0000 .4331 19.0000 .7480 NG2L 0.87
      6348942 PSC63S16FNEL2 PSC63S16FNEL2 16.0000 .6299 80.0000 3.149 48.8400 1.922 11.0000 .4331 20.0000 .7874 NG2R 0.86
        6348918 PSC63S16FNER2 PSC63S16FNER2 16.0000 .6299 80.0000 3.149 48.8700 1.924 11.0000 .4331 20.0000 .7874 NG2L 0.86
          6348920 PSC63S20HNEL2 PSC63S20HNEL2 20.0000 .7874 100.0000 3.937 63.8000 2.511 13.0000 .5118 24.5000 .9646 NG2R 1.01
            6348916 PSC63S20HNER2 PSC63S20HNER2 20.0000 .7874 100.0000 3.937 63.8000 2.511 13.0000 .5118 24.0000 .9449 NG2L 1.01
              4096061 PSC63S25JNEL3 PSC63S25JNEL3 25.0000 .9840 110.0000 4.330 83.2900 3.279 17.0000 .6693 34.0000 1.338 NG3R 1.10
                4096060 PSC63S25JNER3 PSC63S25JNER3 25.0000 .9840 110.0000 4.330 83.2900 3.279 17.0000 .6693 34.0000 1.338 NG3L 1.10
                  6348915 PSC63S32GNEL3 PSC63S32GNEL3 32.0000 1.259 90.0000 3.543 62.0000 2.440 22.0000 .8661 38.5000 1.515 NG3R 1.11
                    6348913 PSC63S32GNER3 PSC63S32GNER3 32.0000 1.259 90.0000 3.543 62.0000 2.440 22.0000 .8661 38.5000 1.515 NG3L 1.11
                      4096073 PSC63S32KNEL3 PSC63S32KNEL3 32.0000 1.260 125.0000 4.921 99.3200 3.910 22.0000 .8661 40.0000 1.574 NG3R 1.34
                        4096062 PSC63S32KNER3 PSC63S32KNER3 32.0000 1.260 125.0000 4.921 99.3200 3.910 22.0000 .8661 40.0000 1.574 NG3L 1.34
                          6348919 PSC63S40JNEL4 PSC63S40JNEL4 40.0000 1.574 110.0000 4.330 80.3000 3.161 27.0000 1.063 48.5000 1.909 NG4R 1.50
                            6348914 PSC63S40JNER4 PSC63S40JNER4 40.0000 1.574 110.0000 4.330 80.0000 3.149 27.0000 1.063 48.0000 1.889 NG4L 1.50
                              6348943 PSC63S40LNEL3 PSC63S40LNEL3 40.0000 1.574 140.0000 5.511 105.6000 4.157 27.0000 1.063 48.5000 1.909 NG3R 1.84
                                6348944 PSC63S40LNEL4 PSC63S40LNEL4 40.0000 1.574 140.0000 5.511 111.0200 4.370 27.0000 1.063 48.5000 1.909 NG4R 1.78
                                  6348912 PSC63S40LNER3 PSC63S40LNER3 40.0000 1.574 140.0000 5.511 105.6000 4.157 27.0000 1.063 48.0000 1.889 NG3L 1.84
                                    6348945 PSC63S40LNER4 PSC63S40LNER4 40.0000 1.574 140.0000 5.511 111.0000 4.370 27.0000 1.063 48.0000 1.889 NG4L 1.79
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                      You are about to create a duplicate . Do you want to proceed?
                                      You are about to delete Do you want to proceed?
                                      What would you like to rename your to?
                                      Please enter a valid name
                                      Please enter a name for the duplicate
                                      Please enter a valid name
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Please enter a valid name
                                      Send a copy of

                                      Please enter a valid Email
                                      Please enter a valid name

                                      We have found the following CAD Drawings

                                      Select the files you are looking for and download them all at once

                                      You should be logged to see your dashboard information
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                      item(s) successfully added to the cart
                                      View Cart