successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (6)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (6)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6)
  • M Stainless Steel (6)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • K Cast Iron (6)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (6)
  • N Non-Ferrous Materials (6)
    • N1
      Wrought Aluminum
      (6)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (3)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (6)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6)
    • N6
      Carbon, Graphite Composites, CFRP
      (6)
    • N7
      MMC's
      (6)
  • S High-Temp Alloys (6)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (6)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (6)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
    • H2
      Hardened Materials 48-55 HRC
      (6)
    • H3
      Hardened Materials 56-60 HRC
      (6)
    • H4
      Hardened Materials >60 HRC
      (6)
Applications
  • Back Boring Back Boring (6)
  • Cut-Off Cut-Off (6)
  • Deep Grooving Deep Grooving (6)
  • Face Grooving Face Grooving (6)
  • Facing Facing (6)
  • Grooving Grooving (6)
  • ID Facing ID Facing (6)
  • ID Grooving ID Grooving (6)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • OD Thread Turning OD Thread Turning (6)
  • Plunge Turning Plunge Turning (2)
  • Profiling Profiling (2)
  • TRN Boring TRN Boring (6)
  • Turning Turning (6)
Cutting Condition
  • Heavily Interrupted Cut (6)
  • Interrupted (6)
  • Lightly Interrupted Cut (6)
  • Smooth Cut (6)
  • Varying Depth of Cut (6)
Tool Cutting Edge Angle
  • 93.0 (2)
  • 95.0 (4)
to
Cutting Edges Per Insert
  • 1.0 (4)
  • 2.0 (6)
  • 4.0 (6)
  • 8.0 (4)
to
cornerConfiguration
Corner Radius
  • 0.1 (3)
  • 0.102 (4)
  • 0.2 (3)
  • 0.203 (3)
  • 0.34 (1)
  • 0.397 (4)
  • 0.4 (6)
  • 0.406 (2)
  • 0.41 (2)
  • 0.792 (3)
  • 0.794 (4)
  • 0.8 (6)
  • 0.81 (2)
  • 1.188 (2)
  • 1.19 (2)
  • 1.191 (6)
  • 1.2 (6)
  • 1.587 (2)
  • 1.588 (5)
  • 1.6 (6)
  • 2.38 (2)
  • 2.381 (1)
  • 2.4 (2)
  • 3.2 (2)
to
Corner Radius
  • 0.004 (4)
  • 0.008 (3)
  • 0.0083 (2)
  • 0.013 (1)
  • 0.0156 (6)
  • 0.016 (4)
  • 0.031 (4)
  • 0.0312 (4)
  • 0.0313 (6)
  • 0.0315 (2)
  • 0.032 (2)
  • 0.0468 (2)
  • 0.0469 (6)
  • 0.047 (6)
  • 0.0472 (2)
  • 0.0625 (6)
  • 0.063 (5)
  • 0.0938 (3)
  • 0.094 (2)
  • 0.126 (2)
  • 0.1563 (2)
  • 0.312 (1)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (6)
  • 241 (2)
  • CL4 (3)
  • CM2 (6)
  • CM3 (3)
  • CM4 (4)
  • CPX (6)
  • CW2 (3)
  • CW2015 (6)
  • CW5025 (6)
  • GX (2)
  • HK1500 (3)
  • HT2 (3)
  • HTX (2)
  • K060 (3)
  • K090 (6)
  • K1 (2)
  • K10M (6)
  • K10P (6)
  • K10U (3)
  • K15U (4)
  • K20K (6)
  • K21 (2)
  • K25M (4)
  • K25P (4)
  • K313 (6)
  • K35P (3)
  • K420 (5)
  • K45 (3)
  • K68 (6)
  • KB1340 (2)
  • KB1345 (3)
  • KB1610 (3)
  • KB1625 (3)
  • KB1630 (3)
  • KB5610 (3)
  • KB5625 (3)
  • KB5630 (3)
  • KB9610 (4)
  • KB9640 (2)
  • KBH10 (4)
  • KBH10B (4)
  • KBH20 (4)
  • KBH20B (4)
  • KBK35 (2)
  • KC210 (4)
  • KC250 (5)
  • KC5010 (6)
  • KC5025 (6)
  • KC5410 (6)
  • KC5510 (6)
  • KC5525 (4)
  • KC710 (2)
  • KC720 (5)
  • KC722 (2)
  • KC730 (5)
  • KC7310 (6)
  • KC732 (5)
  • KC8050 (6)
  • KC810 (6)
  • KC850 (6)
  • KC9010 (6)
  • KC9025 (6)
  • KC910 (6)
  • KC9105 (6)
  • KC9110 (6)
  • KC9120 (6)
  • KC9125 (6)
  • KC9140 (6)
  • KC9145 (6)
  • KC9210 (1)
  • KC9215 (6)
  • KC9225 (6)
  • KC9240 (6)
  • KC9240NEW (6)
  • KC9245 (6)
  • KC9315 (6)
  • KC9320 (6)
  • KC9325 (6)
  • KC935 (6)
  • KC950 (6)
  • KC990 (6)
  • KCD25 (1)
  • KCK05 (6)
  • KCK05B (6)
  • KCK15 (6)
  • KCK15B (6)
  • KCK20 (6)
  • KCK20B (6)
  • KCM15 (6)
  • KCM15B (6)
  • KCM25 (6)
  • KCM25B (6)
  • KCM35 (6)
  • KCM35B (5)
  • KCP05 (6)
  • KCP05B (4)
  • KCP10 (6)
  • KCP10B (6)
  • KCP25 (6)
  • KCP25B (6)
  • KCP30 (6)
  • KCP30B (6)
  • KCP40 (6)
  • KCP40B (6)
  • KCPK05 (6)
  • KCS10 (2)
  • KCS10B (6)
  • KCU10 (6)
  • KCU25 (6)
  • KD050 (3)
  • KD081 (3)
  • KD100 (3)
  • KD120 (3)
  • KD1400 (3)
  • KD1405 (3)
  • KD1425 (3)
  • KM1 (2)
  • KMF (2)
  • KT1120 (2)
  • KT125 (4)
  • KT150 (3)
  • KT175 (4)
  • KT315 (4)
  • KT325 (3)
  • KTP10 (1)
  • KU10T (4)
  • KU30T (6)
  • KY1310 (5)
  • KY1320 (6)
  • KY1540 (3)
  • KY1615 (6)
  • KY2000 (5)
  • KY2100 (3)
  • KY3000 (6)
  • KY3400 (5)
  • KY3500 (6)
  • KY4000 (4)
  • KY4300 (5)
  • KY4400 (6)
  • KYK10 (3)
  • KYK25 (5)
  • KYK35 (6)
  • KYS25 (3)
  • KYS30 (3)
  • NL200 (3)
  • NL250 (6)
  • NL300 (5)
  • NL400 (4)
  • NL920 (4)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (3)
  • SP0819 (5)
  • SP3019 (4)
  • SP4019 (4)
  • THM (3)
  • THM-X (2)
  • THMF-X (2)
  • TN10P (6)
  • TN10U (4)
  • TN15M (6)
  • TN15U (4)
  • TN2000 (3)
  • TN20K (6)
  • TN20P (6)
  • TN30M (6)
  • TN30P (6)
  • TN4000 (3)
  • TN5015 (5)
  • TN5020 (5)
  • TN5105 (4)
  • TN5120 (6)
  • TN6010 (4)
  • TN6025 (3)
  • TN7005 (4)
  • TN7010 (6)
  • TN7015 (6)
  • TN7025 (6)
  • TN7035 (5)
  • TN7105 (3)
  • TN7110 (5)
  • TN7115 (6)
  • TN7125 (5)
  • TN7135 (5)
  • TN8025 (6)
  • TTI15 (3)
  • TTR (2)
  • TTS (3)
  • TTX (3)
  • WBH10C (4)
  • WBH10P (3)
  • WBH10U (3)
  • WBH25P (3)
  • WBH25U (4)
  • WBH30P (3)
  • WBK40U (2)
  • WBK45U (4)
  • WDN00U (3)
  • WDN25U (3)
  • WK05CT (6)
  • WK15CT (3)
  • WK20CT (6)
  • WM15CT (6)
  • WM25CT (6)
  • WM35CT (6)
  • WP05CT (2)
  • WP15CT (6)
  • WP25CT (6)
  • WP35CT (6)
  • WS10PT (6)
  • WS25PT (6)
  • WU10HT (6)
  • X00511 (2)
Wiper Insert
  • N (6)
  • Y (4)
Minimum Axial Groove Diameter
  • 1.2598 (2)
  • 1.9685 (4)
to
Minimum Axial Groove Diameter
  • 32.0 (2)
  • 50.0 (4)
to
Maximum Bore Depth
  • 72.0 (2)
  • 114.0 (4)
to
Maximum Bore Depth
  • 2.8346 (2)
  • 4.4882 (4)
to
frontEnd
Clamp Style
  • D (6)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (2)
insertGeometry
Cutting Tool Material
  • B H (4)
  • B L (4)
  • C A (6)
  • C N (6)
  • D P (4)
  • H T (4)
  • H W (6)
backEnd
Back-End Diameter
  • 2.4803 (6)
to
Back-End Diameter
  • 63.0 (6)
to
other
Platform
  • PSC63 (6)
Tool Unit
  • M (6)
Over All Length [L]
  • 100.0 (2)
  • 140.0 (4)
to
Over All Length [L]
  • 3.937 (2)
  • 5.5118 (4)
to
Insert Hand
  • N (6)
Cutting Condition Material
  • H-All (6)
  • K-All (6)
  • K1 (2)
  • M-All (6)
  • N-All (6)
  • P-All (6)
  • S-All (6)
  • S4 (3)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
PSC63

Schneidköpfe zur Innenbearbeitung • D-Klemmung
(4 Products)
  • Shank - PSCShank - PSC
  • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6339684 PSC63S25HDCLNL12 PSC63S25HDCLNL12 25.0000 .9843 100.0000 3.937 72.0000 2.834 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 1.29
    6339689 PSC63S25HDCLNR12 PSC63S25HDCLNR12 25.0000 .9843 100.0000 3.937 72.0000 2.834 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 1.29
      6339685 PSC63S40LDCLNL16 PSC63S40LDCLNL16 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 CN..160612/CN..543 2.07
        6339690 PSC63S40LDCLNR16 PSC63S40LDCLNR16 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 CN..160612/CN..543 2.07
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          PSC63

          Schneidköpfe • D-Klemmung
          (2 Products)
          • Shank - PSCShank - PSC
          • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
          6341449 PSC63S40LDDUNL1506 PSC63S40LDDUNL1506 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.70
            6341450 PSC63S40LDDUNR1506 PSC63S40LDDUNR1506 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.70
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              We have found the following CAD Drawings

              Select the files you are looking for and download them all at once

              You should be logged to see your dashboard information
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart