successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (17)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (17)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (17)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (17)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (17)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (17)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (17)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (17)
  • M Stainless Steel (17)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (17)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (17)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (17)
  • K Cast Iron (17)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (17)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (17)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (17)
  • N Non-Ferrous Materials (17)
    • N1
      Wrought Aluminum
      (17)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (17)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (17)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (17)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (17)
    • N6
      Carbon, Graphite Composites, CFRP
      (17)
    • N7
      MMC's
      (17)
  • S High-Temp Alloys (17)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (17)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (17)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (17)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (17)
  • H Hardened Materials (17)
    • H1
      Hardened Materials 44-48 HRC
      (17)
    • H2
      Hardened Materials 48-55 HRC
      (17)
    • H3
      Hardened Materials 56-60 HRC
      (11)
    • H4
      Hardened Materials >60 HRC
      (11)
Applications
  • Back Boring Back Boring (17)
  • Deep Grooving Deep Grooving (17)
  • Face Grooving Face Grooving (17)
  • ID Grooving ID Grooving (17)
  • Plunge Turning Plunge Turning (17)
  • Profiling Profiling (17)
  • TRN Boring TRN Boring (17)
Type of Thread
  • 60 (17)
  • ACME (11)
  • API (11)
  • API RD (7)
  • BSW (7)
  • BUTTRESS (17)
  • M (10)
  • NPT (7)
  • STUB ACME (7)
  • UN (17)
  • UNJ (7)
Cutting Condition
  • Heavily Interrupted Cut (17)
  • Lightly Interrupted Cut (17)
  • Smooth Cut (17)
  • Varying Depth of Cut (17)
Tool Cutting Edge Angle
  • 90.0 (17)
to
Connection Style
  • PSC (17)
Cutting Edges Per Insert
  • 1.0 (17)
  • 2.0 (17)
to
cornerConfiguration
Corner Radius
  • 0.026 (3)
  • 0.051 (3)
  • 0.057 (4)
  • 0.066 (7)
  • 0.076 (17)
  • 0.08 (13)
  • 0.089 (9)
  • 0.09 (9)
  • 0.094 (7)
  • 0.097 (4)
  • 0.1 (13)
  • 0.102 (13)
  • 0.116 (3)
  • 0.117 (4)
  • 0.127 (7)
  • 0.131 (7)
  • 0.132 (7)
  • 0.133 (7)
  • 0.15 (7)
  • 0.155 (7)
  • 0.157 (7)
  • 0.16 (4)
  • 0.165 (11)
  • 0.173 (7)
  • 0.178 (7)
  • 0.18 (3)
  • 0.185 (3)
  • 0.19 (17)
  • 0.191 (17)
  • 0.198 (7)
  • 0.2 (7)
  • 0.202 (10)
  • 0.224 (7)
  • 0.235 (7)
  • 0.244 (3)
  • 0.25 (7)
  • 0.251 (7)
  • 0.254 (11)
  • 0.255 (3)
  • 0.269 (7)
  • 0.282 (7)
  • 0.284 (7)
  • 0.3 (7)
  • 0.315 (9)
  • 0.318 (11)
  • 0.33 (7)
  • 0.34 (7)
  • 0.343 (10)
  • 0.356 (7)
  • 0.404 (7)
  • 0.406 (7)
  • 0.43 (7)
  • 0.445 (11)
  • 0.472 (3)
  • 0.49 (7)
  • 0.5 (6)
  • 0.508 (7)
  • 0.565 (2)
  • 0.57 (4)
  • 0.572 (11)
  • 0.575 (7)
  • 0.75 (6)
  • 0.787 (13)
  • 0.902 (11)
  • 1.0 (13)
  • 1.194 (13)
  • 1.195 (4)
  • 1.25 (13)
  • 1.5 (13)
  • 1.585 (7)
  • 1.588 (17)
  • 1.59 (2)
  • 1.75 (13)
  • 1.98 (4)
  • 1.981 (7)
  • 2.0 (11)
  • 2.25 (11)
  • 2.388 (11)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (3)
  • 0.0023 (4)
  • 0.0026 (7)
  • 0.003 (17)
  • 0.0031 (13)
  • 0.0035 (9)
  • 0.0037 (7)
  • 0.0038 (4)
  • 0.004 (13)
  • 0.0046 (7)
  • 0.005 (7)
  • 0.0052 (7)
  • 0.0053 (7)
  • 0.0059 (7)
  • 0.006 (7)
  • 0.0062 (7)
  • 0.0065 (11)
  • 0.0068 (7)
  • 0.007 (7)
  • 0.0075 (17)
  • 0.0078 (7)
  • 0.0079 (3)
  • 0.008 (10)
  • 0.0088 (7)
  • 0.0093 (7)
  • 0.0096 (3)
  • 0.0099 (7)
  • 0.01 (11)
  • 0.0106 (7)
  • 0.0111 (7)
  • 0.0112 (7)
  • 0.0118 (7)
  • 0.0124 (7)
  • 0.0125 (11)
  • 0.013 (7)
  • 0.0135 (14)
  • 0.014 (7)
  • 0.0159 (7)
  • 0.016 (7)
  • 0.017 (7)
  • 0.0175 (11)
  • 0.0186 (3)
  • 0.0193 (7)
  • 0.0197 (6)
  • 0.02 (7)
  • 0.0225 (11)
  • 0.0295 (6)
  • 0.031 (13)
  • 0.0355 (11)
  • 0.0394 (13)
  • 0.047 (13)
  • 0.0492 (13)
  • 0.0591 (13)
  • 0.0625 (17)
  • 0.0689 (13)
  • 0.078 (7)
  • 0.0787 (11)
  • 0.0886 (11)
  • 0.094 (11)
  • 0.0984 (4)
  • 0.106 (4)
  • 0.125 (4)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (13)
  • K313 (17)
  • K420 (17)
  • K4H (10)
  • K68 (17)
  • KB1345 (11)
  • KB1630 (11)
  • KB5625 (7)
  • KC250 (13)
  • KC5010 (17)
  • KC5025 (17)
  • KC5410 (17)
  • KC710 (17)
  • KC720 (17)
  • KC722 (17)
  • KC730 (17)
  • KC732 (7)
  • KC810 (17)
  • KC850 (17)
  • KC910 (10)
  • KC9110 (17)
  • KC9120 (7)
  • KC9320 (17)
  • KC935 (17)
  • KC950 (17)
  • KCK20 (14)
  • KCK20B (17)
  • KCP10B (17)
  • KCP25B (17)
  • KCU10 (17)
  • KCU25 (17)
  • KD050 (3)
  • KD081 (7)
  • KD100 (9)
  • KD120 (11)
  • KD1425 (7)
  • KT175 (13)
  • KT315 (17)
  • KU10T (17)
  • KU25T (17)
  • KU30T (17)
  • KY3000 (11)
  • THM (13)
  • TN10P (12)
  • TN6010 (17)
  • TN6025 (17)
  • TN7110 (17)
  • WU10HT (3)
  • WU10PT (7)
  • WU25PT (4)
Hand Of Tool
  • L (8)
  • R (9)
Wiper Insert
  • N (17)
Minimum Axial Groove Diameter
  • 0.7283 (2)
  • 0.7874 (2)
  • 0.9449 (2)
  • 1.3189 (2)
  • 1.5157 (4)
  • 1.8898 (1)
  • 1.9094 (3)
  • 2.0669 (1)
to
Minimum Axial Groove Diameter
  • 18.5 (2)
  • 20.0 (2)
  • 24.0 (2)
  • 33.5 (2)
  • 38.5 (4)
  • 48.0 (1)
  • 48.5 (3)
  • 52.5 (1)
to
Maximum Axial Groove Diameter
  • 9999.0 (17)
to
Maximum Axial Groove Diameter
  • 393.661 (17)
to
Cutting Direction
  • S (17)
Maximum Bore Depth
  • 36.8 (2)
  • 51.0 (2)
  • 64.0 (4)
  • 84.0 (2)
  • 88.4 (2)
  • 89.0 (2)
  • 113.0 (3)
to
Maximum Bore Depth
  • 1.4488 (2)
  • 2.0079 (2)
  • 2.5197 (4)
  • 3.3071 (2)
  • 3.4803 (2)
  • 3.5039 (2)
  • 4.4488 (3)
to
Boring Bar Material
  • S (17)
frontEnd
Clamp Style
  • N (17)
Insert Shape
  • TN-TOP NOTCH (17)
Cutting Width
  • 0.5 (6)
  • 0.787 (6)
  • 0.8 (6)
  • 0.889 (6)
  • 0.991 (6)
  • 1.0 (13)
  • 1.041 (6)
  • 1.19 (10)
  • 1.194 (13)
  • 1.199 (3)
  • 1.2 (13)
  • 1.39 (6)
  • 1.397 (6)
  • 1.4 (6)
  • 1.473 (6)
  • 1.5 (13)
  • 1.56 (3)
  • 1.57 (10)
  • 1.575 (13)
  • 1.69 (6)
  • 1.7 (6)
  • 1.702 (6)
  • 1.75 (13)
  • 1.829 (7)
  • 1.94 (6)
  • 1.95 (6)
  • 1.956 (6)
  • 1.981 (7)
  • 2.0 (13)
  • 2.007 (6)
  • 2.2 (13)
  • 2.235 (13)
  • 2.24 (9)
  • 2.25 (10)
  • 2.388 (13)
  • 2.39 (4)
  • 2.464 (7)
  • 2.5 (13)
  • 2.667 (7)
  • 2.74 (6)
  • 2.743 (13)
  • 2.75 (13)
  • 2.794 (7)
  • 2.997 (13)
  • 3.0 (17)
  • 3.099 (7)
  • 3.17 (7)
  • 3.175 (17)
  • 3.18 (5)
  • 3.2 (17)
  • 3.245 (6)
  • 3.25 (7)
  • 3.251 (13)
  • 3.27 (6)
  • 3.32 (3)
  • 3.329 (3)
  • 3.5 (17)
  • 3.607 (7)
  • 3.73 (3)
  • 3.81 (6)
  • 3.84 (6)
  • 3.96 (7)
  • 3.962 (7)
  • 3.974 (3)
  • 3.988 (7)
  • 4.0 (11)
  • 4.24 (4)
  • 4.242 (11)
  • 4.25 (3)
  • 4.3 (7)
  • 4.5 (11)
  • 4.521 (7)
  • 4.699 (9)
  • 4.775 (11)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (7)
  • 4.801 (11)
  • 4.81 (7)
  • 4.88 (3)
  • 4.95 (7)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)
to
Cutting Width
  • 0.0197 (6)
  • 0.031 (6)
  • 0.0315 (6)
  • 0.035 (6)
  • 0.039 (6)
  • 0.0394 (13)
  • 0.041 (6)
  • 0.047 (13)
  • 0.0472 (13)
  • 0.055 (6)
  • 0.0551 (6)
  • 0.058 (6)
  • 0.0591 (13)
  • 0.062 (13)
  • 0.0669 (6)
  • 0.067 (6)
  • 0.0689 (13)
  • 0.072 (7)
  • 0.076 (6)
  • 0.0768 (6)
  • 0.077 (6)
  • 0.078 (7)
  • 0.0787 (13)
  • 0.079 (9)
  • 0.0866 (13)
  • 0.088 (13)
  • 0.0886 (10)
  • 0.094 (13)
  • 0.097 (7)
  • 0.0984 (13)
  • 0.105 (7)
  • 0.108 (13)
  • 0.1083 (13)
  • 0.11 (7)
  • 0.118 (13)
  • 0.1181 (17)
  • 0.122 (7)
  • 0.125 (17)
  • 0.126 (17)
  • 0.1278 (6)
  • 0.128 (13)
  • 0.129 (6)
  • 0.131 (3)
  • 0.1378 (17)
  • 0.142 (7)
  • 0.147 (3)
  • 0.15 (6)
  • 0.151 (6)
  • 0.156 (7)
  • 0.157 (7)
  • 0.1574 (11)
  • 0.1575 (11)
  • 0.167 (11)
  • 0.1673 (3)
  • 0.169 (7)
  • 0.1771 (11)
  • 0.1772 (11)
  • 0.178 (7)
  • 0.185 (9)
  • 0.188 (11)
  • 0.189 (11)
  • 0.192 (3)
  • 0.195 (7)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.219 (4)
  • 0.2362 (4)
  • 0.25 (4)
  • 0.255 (4)
to
Maximum Cutting Depth
  • 3.51 (5)
  • 5.33 (7)
  • 7.47 (4)
to
Maximum Cutting Depth
  • 0.1382 (5)
  • 0.2098 (7)
  • 0.2941 (4)
to
Insert Size
  • 2 (6)
  • 3 (7)
  • 4 (4)
insertGeometry
Cutting Tool Material
  • B H (11)
  • B L (7)
  • C N (11)
  • D P (9)
  • H T (17)
  • H W (17)
backEnd
Connection Type
  • TAPER SHANK (17)
System Size
  • PSC50 (17)
Back-End Diameter
  • 1.9685 (17)
to
Back-End Diameter
  • 50.0 (17)
to
other
Platform
  • PSC50 (17)
Tool Unit
  • M (17)
Over All Length [L]
  • 70.0 (2)
  • 80.0 (1)
  • 80.03 (1)
  • 90.0 (2)
  • 100.0 (2)
  • 109.7 (1)
  • 110.0 (3)
  • 125.0 (2)
  • 140.0 (3)
to
Over All Length [L]
  • 2.7559 (2)
  • 3.1496 (1)
  • 3.1508 (1)
  • 3.5433 (2)
  • 3.937 (2)
  • 4.3189 (1)
  • 4.3307 (3)
  • 4.9213 (2)
  • 5.5118 (3)
to
Insert Hand
  • L (9)
  • R (8)
obsoleteFacet
  • false (17)
  • true (17)
Cutting Condition Material
  • H-All (17)
  • K-All (17)
  • M-All (17)
  • N-All (17)
  • P-All (17)
  • S-All (17)
No filters matching ""
View Products in
Metric
Inch
PSC50

Internal Cutting Units • Threading and Grooving
(17 Products)
  • Shank - PSCShank - PSC
  • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6338413 PSC50S12ENEL2 PSC50S12ENEL2 12.0000 .4724 70.0000 2.755 36.8000 1.448 11.0000 .4331 18.5000 .7283 NG2R 0.53
    6338408 PSC50S12ENER2 PSC50S12ENER2 12.0000 .4724 70.0000 2.755 36.8000 1.448 11.0000 .4331 18.5000 .7283 NG2L 0.51
      6338414 PSC50S16FNEL2 PSC50S16FNEL2 16.0000 .6299 80.0000 3.149 51.0000 2.007 11.0000 .4331 20.0000 .7874 NG2R 0.53
        6338409 PSC50S16FNER2 PSC50S16FNER2 16.0000 .6299 80.0300 3.150 51.0000 2.007 11.0000 .4331 20.0000 .7874 NG2L 0.53
          6338412 PSC50S20HNEL2 PSC50S20HNEL2 20.0000 .7874 100.0000 3.937 64.0000 2.519 13.0000 .5118 24.0000 .9449 NG2R 0.66
            6338407 PSC50S20HNER2 PSC50S20HNER2 20.0000 .7874 100.0000 3.937 64.0000 2.519 13.0000 .5118 24.0000 .9449 NG2L 0.66
              6338410 PSC50S25JNEL3 PSC50S25JNEL3 25.0000 .9843 109.7000 4.318 88.4000 3.480 17.0000 .6693 33.5000 1.318 NG3R 1.18
                6338406 PSC50S25JNER3 PSC50S25JNER3 25.0000 .9843 110.0000 4.330 88.4000 3.480 17.0000 .6693 33.5000 1.318 NG3L 1.18
                  6338404 PSC50S32GNEL3 PSC50S32GNEL3 32.0000 1.259 90.0000 3.543 64.0000 2.519 22.0000 .8661 38.5000 1.515 NG3R 1.18
                    6338402 PSC50S32GNER3 PSC50S32GNER3 32.0000 1.259 90.0000 3.543 64.0000 2.519 22.0000 .8661 38.5000 1.515 NG3L 0.79
                      6338415 PSC50S32KNEL3 PSC50S32KNEL3 32.0000 1.259 125.0000 4.921 89.0000 3.503 22.0000 .8661 38.5000 1.515 NG3R 1.18
                        6338405 PSC50S32KNER3 PSC50S32KNER3 32.0000 1.259 125.0000 4.921 89.0000 3.503 22.0000 .8661 38.5000 1.515 NG3L 1.18
                          6338411 PSC50S40JNEL4 PSC50S40JNEL4 40.0000 1.574 110.0000 4.330 84.0000 3.307 27.0000 1.063 48.5000 1.909 NG4R 1.18
                            6338403 PSC50S40JNER4 PSC50S40JNER4 40.0000 1.574 110.0000 4.330 84.0000 3.307 27.0000 1.063 48.0000 1.889 NG4L 1.18
                              6338416 PSC50S40LNEL4 PSC50S40LNEL4 40.0000 1.574 140.0000 5.511 113.0000 4.448 27.0000 1.063 48.5000 1.909 NG4R 1.48
                                6338401 PSC50S40LNER3 PSC50S40LNER3 40.0000 1.574 140.0000 5.511 113.0000 4.448 27.0000 1.063 52.5000 2.066 NG3L 1.48
                                  6338417 PSC50S40LNER4 PSC50S40LNER4 40.0000 1.574 140.0000 5.511 113.0000 4.448 27.0000 1.063 48.5000 1.909 NG4L 0.79
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty
                                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                    You are about to create a duplicate . Do you want to proceed?
                                    You are about to delete Do you want to proceed?
                                    What would you like to rename your to?
                                    Please enter a valid name
                                    Please enter a name for the duplicate
                                    Please enter a valid name
                                    You are about to add to your My Solutions page. Do you want to proceed?
                                    Please enter a valid name
                                    Send a copy of

                                    Please enter a valid Email
                                    Please enter a valid name

                                    We have found the following CAD Drawings

                                    Select the files you are looking for and download them all at once

                                    You should be logged to see your dashboard information
                                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                    item(s) successfully added to the cart
                                    View Cart