successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (24)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (24)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (24)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (24)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (24)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (24)
  • M Stainless Steel (24)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (24)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (24)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (24)
  • K Cast Iron (24)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (24)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (24)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (24)
  • N Non-Ferrous Materials (24)
    • N1
      Wrought Aluminum
      (24)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (24)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (24)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (24)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (24)
    • N6
      Carbon, Graphite Composites, CFRP
      (24)
    • N7
      MMC's
      (24)
  • S High-Temp Alloys (24)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (24)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (24)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (24)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (24)
  • H Hardened Materials (24)
    • H1
      Hardened Materials 44-48 HRC
      (24)
    • H2
      Hardened Materials 48-55 HRC
      (24)
    • H3
      Hardened Materials 56-60 HRC
      (24)
    • H4
      Hardened Materials >60 HRC
      (24)
Applications
  • Back Boring Back Boring (24)
  • Cut-Off Cut-Off (24)
  • Deep Grooving Deep Grooving (24)
  • Face Grooving Face Grooving (24)
  • Facing Facing (24)
  • Grooving Grooving (24)
  • ID Facing ID Facing (24)
  • ID Grooving ID Grooving (24)
  • ID Thread Turning ID Thread Turning (24)
  • Multiple Direction Cutting Multiple Direction Cutting (24)
  • OD Thread Turning OD Thread Turning (24)
  • Plunge Turning Plunge Turning (24)
  • Profiling Profiling (9)
  • TRN Boring TRN Boring (24)
  • Turning Turning (24)
Cutting Condition
  • Heavily Interrupted Cut (24)
  • Lightly Interrupted Cut (24)
  • Smooth Cut (24)
  • Varying Depth of Cut (24)
Tool Cutting Edge Angle
  • 90.0 (3)
  • 93.0 (3)
  • 95.0 (12)
  • 107.5 (6)
to
Connection Style
  • PSC (24)
Cutting Edges Per Insert
  • 1.0 (18)
  • 2.0 (21)
  • 3.0 (3)
  • 4.0 (12)
to
cornerConfiguration
Corner Radius
  • 0.03 (2)
  • 0.038 (18)
  • 0.1 (24)
  • 0.2 (24)
  • 0.203 (10)
  • 0.394 (2)
  • 0.397 (18)
  • 0.4 (24)
  • 0.791 (6)
  • 0.794 (23)
  • 0.8 (24)
  • 1.188 (6)
  • 1.191 (2)
  • 1.2 (22)
  • 1.6 (6)
to
Corner Radius
  • 0.001 (2)
  • 0.0015 (18)
  • 0.004 (24)
  • 0.0078 (2)
  • 0.0079 (2)
  • 0.008 (24)
  • 0.0155 (2)
  • 0.0156 (24)
  • 0.0158 (9)
  • 0.016 (7)
  • 0.0311 (6)
  • 0.0312 (23)
  • 0.0313 (24)
  • 0.0315 (21)
  • 0.0468 (6)
  • 0.0469 (22)
  • 0.047 (6)
  • 0.0472 (2)
  • 0.0625 (6)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • GH1 (2)
  • HCK10 (15)
  • HK1500 (14)
  • HK35 (9)
  • HT2 (24)
  • HTX (24)
  • HWK10 (1)
  • HWK15 (15)
  • K1010P (2)
  • K10M (18)
  • K10P (9)
  • K10U (18)
  • K15U (18)
  • K20K (11)
  • K25M (1)
  • K25P (1)
  • K313 (24)
  • K420 (2)
  • K68 (24)
  • KB1345 (14)
  • KB1610 (16)
  • KB1625 (10)
  • KB1630 (12)
  • KB5610 (18)
  • KB5625 (18)
  • KB5630 (15)
  • KB9610 (18)
  • KBH10 (16)
  • KBH20 (22)
  • KC5010 (24)
  • KC5020P (9)
  • KC5025 (24)
  • KC5410 (24)
  • KC720 (24)
  • KC730 (24)
  • KC732 (24)
  • KC8050 (24)
  • KC810 (24)
  • KC850 (24)
  • KC9010 (10)
  • KC9025 (24)
  • KC910 (24)
  • KC9105 (24)
  • KC9110 (24)
  • KC9120 (11)
  • KC9125 (24)
  • KC9225 (24)
  • KC9240 (24)
  • KC9240NEW (24)
  • KC9315 (24)
  • KC9320 (24)
  • KC9325 (17)
  • KC935 (24)
  • KC950 (18)
  • KC990 (12)
  • KCD25 (23)
  • KCK05 (24)
  • KCK05B (17)
  • KCK15 (23)
  • KCK15B (24)
  • KCK20 (24)
  • KCK20B (24)
  • KCM15 (24)
  • KCM15B (22)
  • KCM25 (24)
  • KCM25B (24)
  • KCM35 (24)
  • KCM35B (11)
  • KCP05 (24)
  • KCP05B (12)
  • KCP10 (24)
  • KCP10B (24)
  • KCP15 (6)
  • KCP25 (24)
  • KCP25B (24)
  • KCP30 (24)
  • KCP30B (12)
  • KCP40B (6)
  • KCS10 (24)
  • KCS10B (24)
  • KCU10 (24)
  • KCU25 (24)
  • KD050 (14)
  • KD081 (14)
  • KD100 (6)
  • KD1400 (18)
  • KD1405 (6)
  • KD1425 (18)
  • KT125 (2)
  • KT175 (15)
  • KT315 (24)
  • KT325 (24)
  • KTP10 (18)
  • KU10 (16)
  • KU10T (24)
  • KU30T (24)
  • NL300 (6)
  • NL920 (6)
  • PB100 (5)
  • PB170 (9)
  • PB250 (11)
  • PB300 (1)
  • PD100 (15)
  • PD50 (9)
  • SP0G00 (1)
  • SP0PW3 (6)
  • SP4019 (6)
  • SPN3W1 (6)
  • THM (24)
  • THM-X (12)
  • TN10P (24)
  • TN10U (24)
  • TN15M (24)
  • TN15U (18)
  • TN2000 (20)
  • TN20K (24)
  • TN20P (24)
  • TN30M (24)
  • TN4000 (12)
  • TN5015 (17)
  • TN5020 (23)
  • TN5105 (17)
  • TN5120 (24)
  • TN6010 (16)
  • TN6025 (10)
  • TN7005 (16)
  • TN7010 (23)
  • TN7015 (24)
  • TN7025 (23)
  • TN7035 (23)
  • TN7105 (24)
  • TN7110 (24)
  • TN7115 (24)
  • TN7125 (24)
  • TN7135 (24)
  • TN8025 (17)
  • TTI15 (15)
  • TTM (6)
  • TTM09 (3)
  • TTR (17)
  • TTS (6)
  • TTX (15)
  • W00342 (9)
  • WBH10C (14)
  • WBH10P (15)
  • WBH10U (16)
  • WBH25P (16)
  • WBH25U (11)
  • WBH30P (15)
  • WBK45U (17)
  • WDN00U (6)
  • WDN25U (18)
  • WK05CT (18)
  • WK15CT (23)
  • WK20CT (24)
  • WM15CT (24)
  • WM25CT (24)
  • WP15CT (24)
  • WP20TT (9)
  • WP25CT (24)
  • WP35CT (21)
  • WS10PT (16)
  • WS25PT (10)
  • WU10HT (24)
  • YY3A00 (1)
Hand Of Tool
  • L (9)
  • R (15)
Wiper Insert
  • N (24)
  • Y (14)
Minimum Axial Groove Diameter
  • 0.7874 (4)
  • 0.9843 (3)
  • 1.2598 (6)
  • 1.2992 (2)
  • 1.5748 (4)
  • 1.9685 (3)
  • 2.4803 (2)
to
Minimum Axial Groove Diameter
  • 20.0 (4)
  • 25.0 (3)
  • 32.0 (6)
  • 33.0 (2)
  • 40.0 (4)
  • 50.0 (3)
  • 63.0 (2)
to
Cutting Direction
  • B (12)
  • E (12)
Rake Angle Style
  • NEGATIVE-ZERO (24)
Maximum Bore Depth
  • 46.0 (4)
  • 56.0 (3)
  • 67.0 (8)
  • 80.0 (1)
  • 88.0 (4)
  • 119.0 (3)
  • 150.0 (1)
to
Maximum Bore Depth
  • 1.811 (4)
  • 2.2047 (3)
  • 2.6378 (8)
  • 3.1496 (1)
  • 3.4646 (4)
  • 4.685 (3)
  • 5.9055 (1)
to
Boring Bar Material
  • S (24)
frontEnd
Clamp Style
  • S (24)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (12)
  • D-DIAMOND/RHOMBIC 55 (3)
  • T-TRIANGLE 60 (3)
  • V-DIAMOND/RHOMBIC 35 (6)
insertGeometry
Cutting Tool Material
  • B H (24)
  • B L (24)
  • C N (6)
  • D P (24)
  • H T (24)
  • H W (24)
backEnd
Connection Type
  • TAPER SHANK (24)
System Size
  • PSC50 (9)
Back-End Diameter
  • 1.9685 (24)
to
Back-End Diameter
  • 50.0 (24)
to
other
Platform
  • PSC50 (24)
Tool Unit
  • M (24)
Over All Length [L]
  • 70.0 (4)
  • 80.0 (3)
  • 90.0 (8)
  • 100.0 (1)
  • 110.0 (4)
  • 140.0 (3)
  • 150.0 (1)
to
Over All Length [L]
  • 2.7559 (4)
  • 3.1496 (3)
  • 3.5433 (8)
  • 3.937 (1)
  • 4.3307 (4)
  • 5.5118 (3)
  • 5.9055 (1)
to
Insert Hand
  • L (8)
  • N (24)
  • R (20)
Display Obsolete Products
  • false (24)
  • true (24)
Cutting Condition Material
  • H-All (22)
  • K-All (24)
  • M-All (24)
  • N-All (24)
  • P-All (24)
  • S-All (24)
  • S4 (6)
No filters matching ""
View Products in
Metric
Inch
PSC50

Schneidköpfe zur Innenbearbeitung • S-Klemmung
(12 Products)
  • Shank - PSCShank - PSC
  • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6319836 PSC50S16ESCLCL09 PSC50S16ESCLCL09 16.0000 .6299 70.0000 2.755 46.0000 1.811 11.0000 .4331 20.0000 .7874 CC..09T308/CC..3252 0.61
    6319871 PSC50S16ESCLCR09 PSC50S16ESCLCR09 16.0000 .6299 70.0000 2.755 46.0000 1.811 11.0000 .4331 20.0000 .7874 CC..09T308/CC..3252 0.61
      6319837 PSC50S20FSCLCL09 PSC50S20FSCLCL09 20.0000 .7874 80.0000 3.149 56.0000 2.204 13.0000 .5118 25.0000 .9843 CC..09T308/CC..3252 0.68
        6319872 PSC50S20FSCLCR09 PSC50S20FSCLCR09 20.0000 .7874 80.0000 3.149 56.0000 2.204 13.0000 .5118 25.0000 .9843 CC..09T308/CC..3252 0.68
          6319838 PSC50S25GSCLCL09 PSC50S25GSCLCL09 25.0000 .9843 90.0000 3.543 67.0000 2.637 17.0000 .6693 32.0000 1.259 CC..09T308/CC..3252 0.77
            6319839 PSC50S25GSCLCL12 PSC50S25GSCLCL12 25.0000 .9843 90.0000 3.543 67.0000 2.637 17.0000 .6693 32.0000 1.259 CC..120408/CC..432 0.78
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              PSC50

              Schneidköpfe zur Innenbearbeitung • S-Klemmung
              (3 Products)
              • Shank - PSCShank - PSC
              • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
              • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
              • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
              6319879 PSC50S16ESDUCL07 PSC50S16ESDUCL07 16.0000 .6299 70.0000 2.755 46.0000 1.811 11.0000 .4331 20.0000 .7874 DC..070204/DC..2151 0.61
                6319880 PSC50S20FSDUCL11 PSC50S20FSDUCL11 20.0000 .7874 80.0000 3.149 56.0000 2.204 13.0000 .5118 25.0000 .9843 DC..11T308/DC..3252 0.67
                  6319891 PSC50S25GSDUCR11 PSC50S25GSDUCR11 25.0000 .9843 90.0000 3.543 67.0000 2.637 17.0000 .6693 32.0000 1.259 DC..11T308/DC..3252 0.77
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty
                    PSC50

                    Schneidköpfe zur Innenbearbeitung • S-Klemmung
                    (3 Products)
                    • Shank - PSCShank - PSC
                    • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
                    • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
                    • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                    6330338 PSC50S16ESTFCR11 PSC50S16ESTFCR11 16.0000 .6299 70.0000 2.755 46.0000 1.811 11.0000 .4331 20.0000 .7874 TC..110204/TC..2151 0.61
                      6330339 PSC50S25GSTFCR16 PSC50S25GSTFCR16 25.0000 .9843 90.0000 3.543 67.0000 2.637 17.0000 .6693 32.0000 1.259 TC..16T308/TC..3252 0.78
                        6330340 PSC50S32JSTFCR16 PSC50S32JSTFCR16 32.0000 1.259 110.0000 4.330 88.0000 3.464 22.0000 .8661 40.0000 1.574 TC..16T308/TC..3252 1.05
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          PSC50

                          Schneidköpfe zur Innenbearbeitung • S-Klemmung
                          (6 Products)
                          • Shank - PSCShank - PSC
                          • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
                          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
                          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                          6330401 PSC50S25GSVQBL16 PSC50S25GSVQBL16 25.0000 .9843 90.0000 3.543 67.0000 2.637 18.0000 .7087 33.0000 1.299 VB..160408/VB..332 0.73
                            6330403 PSC50S25GSVQBR16 PSC50S25GSVQBR16 25.0000 .9843 90.0000 3.543 67.0000 2.637 18.0000 .7087 33.0000 1.299 VB..160408/VB..332 0.73
                              6330402 PSC50S32JSVQBL16 PSC50S32JSVQBL16 32.0000 1.259 110.0000 4.330 88.0000 3.464 22.0000 .8661 40.0000 1.574 VB..160408/VB..332 1.02
                                6330404 PSC50S32JSVQBR16 PSC50S32JSVQBR16 32.0000 1.259 110.0000 4.330 88.0000 3.464 22.0000 .8661 40.0000 1.574 VB..160408/VB..332 1.02
                                  6330405 PSC50S40LSVQBR16 PSC50S40LSVQBR16 40.0000 1.574 140.0000 5.511 119.0000 4.685 27.0000 1.063 50.0000 1.968 VB..160408/VB..332 1.54
                                    6330406 PSC50S50MSVQBR16 PSC50S50MSVQBR16 50.0000 1.968 150.0000 5.905 150.0000 5.905 35.0000 1.378 63.0000 2.480 VB..160408/VB..332 2.24
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                      You are about to create a duplicate . Do you want to proceed?
                                      You are about to delete Do you want to proceed?
                                      What would you like to rename your to?
                                      Please enter a valid name
                                      Please enter a name for the duplicate
                                      Please enter a valid name
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Please enter a valid name
                                      Send a copy of

                                      Please enter a valid Email
                                      Please enter a valid name

                                      We have found the following CAD Drawings

                                      Select the files you are looking for and download them all at once

                                      You should be logged to see your dashboard information
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                      item(s) successfully added to the cart
                                      View Cart