Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (26)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (26)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (26)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (26)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (26)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (26)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (26)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (26)
  • M Stainless Steel (26)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (26)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (26)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (26)
  • K Cast Iron (26)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (26)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (26)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (26)
  • N Non-Ferrous Materials (24)
    • N1
      Wrought Aluminum
      (24)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (24)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (24)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (24)
    • N6
      Carbon, Graphite Composites, CFRP
      (20)
    • N7
      MMC's
      (24)
  • S High-Temp Alloys (26)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (26)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (26)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (26)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (26)
  • H Hardened Materials (20)
    • H1
      Hardened Materials 44-48 HRC
      (20)
    • H2
      Hardened Materials 48-55 HRC
      (20)
    • H3
      Hardened Materials 56-60 HRC
      (20)
    • H4
      Hardened Materials >60 HRC
      (20)
Applications
  • Back Boring Back Boring (26)
  • Cut-Off Cut-Off (26)
  • Deep Grooving Deep Grooving (26)
  • Face Grooving Face Grooving (26)
  • Facing Facing (26)
  • Grooving Grooving (26)
  • ID Facing ID Facing (26)
  • ID Grooving ID Grooving (26)
  • ID Thread Turning ID Thread Turning (26)
  • Multiple Direction Cutting Multiple Direction Cutting (26)
  • OD Thread Turning OD Thread Turning (26)
  • Plunge Turning Plunge Turning (26)
  • TRN Boring TRN Boring (26)
  • Turning Turning (26)
Cutting Condition
  • Heavily Interrupted Cut (26)
  • Interrupted (22)
  • Lightly Interrupted Cut (26)
  • Smooth Cut (26)
  • Varying Depth of Cut (26)
Tool Cutting Edge Angle
  • 75.0 (4)
  • 93.0 (10)
  • 95.0 (12)
to
Cutting Edges Per Insert
  • 1.0 (14)
  • 2.0 (20)
  • 4.0 (26)
  • 8.0 (16)
to
cornerConfiguration
Corner Radius
  • 0.1 (12)
  • 0.102 (14)
  • 0.2 (12)
  • 0.203 (8)
  • 0.34 (6)
  • 0.397 (22)
  • 0.4 (26)
  • 0.406 (6)
  • 0.41 (6)
  • 0.79 (4)
  • 0.792 (14)
  • 0.794 (22)
  • 0.8 (26)
  • 0.81 (6)
  • 1.188 (2)
  • 1.19 (8)
  • 1.191 (24)
  • 1.2 (26)
  • 1.587 (8)
  • 1.588 (14)
  • 1.6 (20)
  • 2.38 (2)
  • 2.4 (6)
  • 3.2 (2)
to
Corner Radius
  • 0.004 (18)
  • 0.008 (12)
  • 0.0083 (8)
  • 0.013 (6)
  • 0.0156 (26)
  • 0.016 (18)
  • 0.031 (22)
  • 0.0312 (22)
  • 0.0313 (26)
  • 0.0315 (8)
  • 0.032 (6)
  • 0.0468 (2)
  • 0.0469 (26)
  • 0.047 (20)
  • 0.0472 (8)
  • 0.0516 (4)
  • 0.0625 (20)
  • 0.063 (20)
  • 0.0938 (6)
  • 0.094 (2)
  • 0.126 (2)
  • 0.1563 (8)
  • 0.312 (6)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (20)
  • 241 (8)
  • CL4 (18)
  • CM2 (20)
  • CM3 (18)
  • CM4 (14)
  • CPX (20)
  • CW2 (14)
  • CW2015 (20)
  • CW5025 (20)
  • GX (12)
  • HK1500 (18)
  • HT2 (18)
  • HTX (8)
  • K060 (12)
  • K090 (20)
  • K1 (8)
  • K10M (20)
  • K10P (22)
  • K10U (12)
  • K15U (18)
  • K20K (20)
  • K21 (12)
  • K25M (24)
  • K25P (20)
  • K313 (24)
  • K35P (6)
  • K420 (14)
  • K45 (12)
  • K68 (20)
  • KB1340 (16)
  • KB1345 (8)
  • KB1610 (12)
  • KB1625 (12)
  • KB1630 (8)
  • KB5610 (8)
  • KB5625 (12)
  • KB5630 (8)
  • KB9610 (18)
  • KB9640 (16)
  • KBH10 (18)
  • KBH10B (14)
  • KBH20 (18)
  • KBH20B (14)
  • KBK35 (8)
  • KC210 (18)
  • KC250 (14)
  • KC5010 (26)
  • KC5025 (24)
  • KC5410 (20)
  • KC5510 (24)
  • KC5525 (18)
  • KC710 (8)
  • KC720 (14)
  • KC722 (8)
  • KC730 (20)
  • KC7310 (26)
  • KC732 (14)
  • KC8050 (26)
  • KC810 (24)
  • KC850 (26)
  • KC9010 (26)
  • KC9025 (26)
  • KC910 (20)
  • KC9105 (24)
  • KC9110 (26)
  • KC9120 (26)
  • KC9125 (26)
  • KC9125RR (4)
  • KC9140 (26)
  • KC9145 (20)
  • KC9210 (6)
  • KC9215 (26)
  • KC9225 (26)
  • KC9240 (26)
  • KC9240NEW (26)
  • KC9245 (26)
  • KC9315 (26)
  • KC9320 (24)
  • KC9325 (24)
  • KC935 (26)
  • KC950 (20)
  • KC990 (26)
  • KCK05 (26)
  • KCK05B (24)
  • KCK15 (24)
  • KCK15B (26)
  • KCK20 (24)
  • KCK20B (24)
  • KCM15 (26)
  • KCM15B (26)
  • KCM25 (26)
  • KCM25B (24)
  • KCM35 (20)
  • KCM35B (20)
  • KCP05 (24)
  • KCP05B (22)
  • KCP10 (26)
  • KCP10B (26)
  • KCP25 (26)
  • KCP25B (26)
  • KCP30 (26)
  • KCP30B (20)
  • KCP40 (20)
  • KCP40B (22)
  • KCPK05 (24)
  • KCS10 (8)
  • KCS10B (24)
  • KCU10 (26)
  • KCU25 (24)
  • KD050 (12)
  • KD081 (12)
  • KD100 (8)
  • KD120 (12)
  • KD1400 (8)
  • KD1405 (8)
  • KD1425 (8)
  • KM1 (12)
  • KMF (8)
  • KT1120 (8)
  • KT125 (18)
  • KT150 (12)
  • KT175 (18)
  • KT315 (24)
  • KT325 (18)
  • KU10T (22)
  • KU30T (24)
  • KY1310 (14)
  • KY1320 (20)
  • KY1540 (12)
  • KY1615 (20)
  • KY2000 (14)
  • KY2100 (12)
  • KY3000 (20)
  • KY3400 (14)
  • KY3500 (20)
  • KY4000 (14)
  • KY4300 (10)
  • KY4400 (20)
  • KYK10 (12)
  • KYK25 (14)
  • KYK35 (20)
  • KYS25 (12)
  • KYS30 (12)
  • NL200 (14)
  • NL250 (24)
  • NL300 (20)
  • NL400 (10)
  • NL920 (18)
  • P25 (12)
  • PB100 (8)
  • PB170 (8)
  • PB250 (8)
  • PB300 (8)
  • PS5 (18)
  • SP0819 (16)
  • SP0A00 (4)
  • SP3019 (14)
  • SP4019 (14)
  • SP61EJ (4)
  • THM (18)
  • THM-X (12)
  • THMF-X (12)
  • TN10P (26)
  • TN10U (18)
  • TN15M (22)
  • TN15U (18)
  • TN2000 (18)
  • TN20K (20)
  • TN20P (26)
  • TN30M (26)
  • TN30P (20)
  • TN4000 (18)
  • TN5015 (24)
  • TN5020 (24)
  • TN5105 (22)
  • TN5120 (24)
  • TN6010 (14)
  • TN6025 (14)
  • TN7005 (20)
  • TN7010 (26)
  • TN7015 (26)
  • TN7025 (26)
  • TN7035 (20)
  • TN7105 (18)
  • TN7110 (24)
  • TN7115 (24)
  • TN7125 (24)
  • TN7135 (20)
  • TN8025 (24)
  • TTI15 (18)
  • TTM09 (4)
  • TTR (12)
  • TTS (18)
  • TTX (14)
  • WBH10C (14)
  • WBH10P (8)
  • WBH10U (12)
  • WBH25P (8)
  • WBH25U (18)
  • WBH30P (8)
  • WBK40U (16)
  • WBK45U (14)
  • WDN00U (8)
  • WDN25U (8)
  • WK05CT (24)
  • WK15CT (18)
  • WK20CT (24)
  • WM15CT (24)
  • WM25CT (24)
  • WM35CT (24)
  • WP05CT (8)
  • WP15CT (24)
  • WP20TT (4)
  • WP25CT (24)
  • WP35CT (24)
  • WS10PT (24)
  • WS25PT (24)
  • WU10HT (24)
  • X00511 (8)
Wiper Insert
  • N (26)
  • Y (22)
Minimum Axial Groove Diameter
  • 0.9843 (2)
  • 1.2598 (5)
  • 1.5748 (5)
  • 1.9685 (6)
  • 2.4803 (8)
to
Minimum Axial Groove Diameter
  • 25.0 (2)
  • 32.0 (5)
  • 40.0 (5)
  • 50.0 (6)
  • 63.0 (8)
to
Maximum Bore Depth
  • 56.0 (2)
  • 67.0 (5)
  • 88.0 (5)
  • 100.0 (4)
  • 119.0 (6)
  • 150.0 (4)
to
Maximum Bore Depth
  • 2.2047 (2)
  • 2.6378 (5)
  • 3.4646 (5)
  • 3.937 (4)
  • 4.685 (6)
  • 5.9055 (4)
to
frontEnd
Clamp Style
  • P (26)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (12)
  • D-DIAMOND/RHOMBIC 55 (10)
  • S-SQUARE 90 (4)
insertGeometry
Cutting Tool Material
  • B H (22)
  • B L (18)
  • C A (20)
  • C N (20)
  • D P (14)
  • H T (24)
  • H W (26)
backEnd
Back-End Diameter
  • 1.9685 (26)
to
Back-End Diameter
  • 50.0 (26)
to
other
Platform
  • PSC50 (26)
Tool Unit
  • M (26)
Over All Length [L]
  • 80.0 (2)
  • 90.0 (5)
  • 100.0 (4)
  • 110.0 (5)
  • 140.0 (6)
  • 150.0 (4)
to
Over All Length [L]
  • 3.1496 (2)
  • 3.5433 (5)
  • 3.937 (4)
  • 4.3307 (5)
  • 5.5118 (6)
  • 5.9055 (4)
to
Insert Hand
  • N (26)
Cutting Condition Material
  • H-All (20)
  • K-All (26)
  • K1 (16)
  • M-All (26)
  • N-All (24)
  • P-All (26)
  • S-All (24)
  • S4 (8)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
PSC50

Schneidköpfe zur Innenbearbeitung • P-Klemmung
(12 Products)
  • Shank - PSCShank - PSC
  • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6320404 PSC50S20FPCLNL09 PSC50S20FPCLNL09 20.0000 .7874 80.0000 3.149 56.0000 2.204 13.0000 .5118 25.0000 .9843 CN..090308/CN..322 1.34
    6320410 PSC50S20FPCLNR09 PSC50S20FPCLNR09 20.0000 .7874 80.0000 3.149 56.0000 2.204 13.0000 .5118 25.0000 .9843 CN..090308/CN..322 0.67
      6320405 PSC50S25GPCLNL12 PSC50S25GPCLNL12 25.0000 .9843 90.0000 3.543 67.0000 2.637 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 0.79
        6320531 PSC50S25GPCLNR12 PSC50S25GPCLNR12 25.0000 .9843 90.0000 3.543 67.0000 2.637 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 0.79
          6320406 PSC50S32JPCLNL12 PSC50S32JPCLNL12 32.0000 1.259 110.0000 4.330 88.0000 3.464 22.0000 .8661 40.0000 1.574 CN..120408/CN..432 1.05
            6320532 PSC50S32JPCLNR12 PSC50S32JPCLNR12 32.0000 1.259 110.0000 4.330 88.0000 3.464 22.0000 .8661 40.0000 1.574 CN..120408/CN..432 1.05
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              PSC50

              Schneidköpfe zur Innenbearbeitung • P-Klemmung
              (10 Products)
              • Shank - PSCShank - PSC
              • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
              • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
              • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
              6320536 PSC50S25GPDUNL11 PSC50S25GPDUNL11 25.0000 .9843 90.0000 3.543 67.0000 2.637 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 0.78
                6320541 PSC50S25GPDUNR11 PSC50S25GPDUNR11 25.0000 .9843 90.0000 3.543 67.0000 2.637 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 0.78
                  6320537 PSC50S32JPDUNL11 PSC50S32JPDUNL11 32.0000 1.259 110.0000 4.330 88.0000 3.464 22.0000 .8661 40.0000 1.574 DN..110408/DN..332 1.04
                    6320542 PSC50S32JPDUNR11 PSC50S32JPDUNR11 32.0000 1.259 110.0000 4.330 88.0000 3.464 22.0000 .8661 40.0000 1.574 DN..110408/DN..332 1.04
                      6320538 PSC50S40LPDUNL15 PSC50S40LPDUNL15 40.0000 1.574 140.0000 5.511 119.0000 4.685 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.61
                        6320543 PSC50S40LPDUNR15 PSC50S40LPDUNR15 40.0000 1.574 140.0000 5.511 119.0000 4.685 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.61
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          PSC50

                          Schneidköpfe zur Innenbearbeitung • P-Klemmung
                          (4 Products)
                          • Shank - PSCShank - PSC
                          • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
                          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
                          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                          6320547 PSC50S25GPSKNR12 PSC50S25GPSKNR12 25.0000 .9843 90.0000 3.543 67.0000 2.637 17.0000 .6693 32.0000 1.259 SN..120408/SN..432 0.79
                            6320548 PSC50S32JPSKNR12 PSC50S32JPSKNR12 32.0000 1.259 110.0000 4.330 88.0000 3.464 22.1000 .8701 40.0000 1.574 SN..120408/SN..432 1.03
                              6320546 PSC50S40LPSKNL12 PSC50S40LPSKNL12 40.0000 1.574 140.0000 5.511 119.0000 4.685 27.1000 1.066 50.0000 1.968 SN..120408/SN..432 1.64
                                6320549 PSC50S40LPSKNR12 PSC50S40LPSKNR12 40.0000 1.574 140.0000 5.511 119.0000 4.685 27.1000 1.066 50.0000 1.968 SN..120408/SN..432 1.64
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor

                                  SUPPORT

                                  Hilfe zu Produkten
                                  E-Mail-Adresse | 0800 1015774

                                   

                                  Hilfe bei Bestellungen

                                  E-Mail-Adresse | 800.979.4342


                                  Chat mit einem Experten  Available 8am-6pm EST

                                  WIDIA WERBEARTIKEL

                                  Karriere

                                  Durchsuchen Sie unsere Stellenangebote

                                  SOZIALE MEDIEN

                                  BLEIBEN WIR IM KONTAKT

                                  Bleiben wir im Kontakt

                                  © 2019 WIDIA Product Group 2018, Privacy Policy

                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                  You are about to create a duplicate . Do you want to proceed?
                                  You are about to delete Do you want to proceed?
                                  What would you like to rename your to?
                                  Please enter a valid name
                                  Please enter a name for the duplicate
                                  Please enter a valid name
                                  You are about to add to your My Solutions page. Do you want to proceed?
                                  Please enter a valid name
                                  Send a copy of

                                  Please enter a valid Email
                                  Please enter a valid name

                                  We have found the following CAD Drawings

                                  Select the files you are looking for and download them all at once

                                  Can’t find the file type you’re looking for?
                                  Request Drawings »

                                  You should be logged to see your dashboard information
                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                  item(s) successfully added to the cart
                                  View Cart