successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (10)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (10)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
    • N6
      Carbon, Graphite Composites, CFRP
      (6)
    • N7
      MMC's
      (8)
  • S High-Temp Alloys (10)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (10)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
    • H2
      Hardened Materials 48-55 HRC
      (6)
    • H3
      Hardened Materials 56-60 HRC
      (6)
    • H4
      Hardened Materials >60 HRC
      (6)
Applications
  • Back Boring Back Boring (10)
  • Cut-Off Cut-Off (10)
  • Deep Grooving Deep Grooving (10)
  • Face Grooving Face Grooving (10)
  • Facing Facing (10)
  • Grooving Grooving (10)
  • ID Facing ID Facing (10)
  • ID Grooving ID Grooving (10)
  • ID Thread Turning ID Thread Turning (10)
  • Multiple Direction Cutting Multiple Direction Cutting (10)
  • OD Thread Turning OD Thread Turning (10)
  • Plunge Turning Plunge Turning (10)
  • Profiling Profiling (10)
  • TRN Boring TRN Boring (10)
  • Turning Turning (10)
Cutting Condition
  • Heavily Interrupted Cut (10)
  • Interrupted (8)
  • Lightly Interrupted Cut (10)
  • Smooth Cut (10)
  • Varying Depth of Cut (10)
Tool Cutting Edge Angle
  • 93.0 (4)
  • 95.0 (6)
to
Connection Style
  • PSC (10)
Cutting Edges Per Insert
  • 1.0 (6)
  • 2.0 (6)
  • 3.0 (2)
  • 4.0 (8)
  • 6.0 (2)
  • 8.0 (4)
to
cornerConfiguration
Corner Radius
  • 0.1 (6)
  • 0.102 (4)
  • 0.2 (6)
  • 0.203 (2)
  • 0.34 (2)
  • 0.397 (8)
  • 0.4 (10)
  • 0.406 (2)
  • 0.6 (2)
  • 0.792 (4)
  • 0.794 (8)
  • 0.8 (10)
  • 1.19 (2)
  • 1.191 (8)
  • 1.2 (10)
  • 1.587 (2)
  • 1.588 (4)
  • 1.6 (6)
to
Corner Radius
  • 0.004 (8)
  • 0.008 (6)
  • 0.0083 (2)
  • 0.013 (2)
  • 0.0156 (10)
  • 0.016 (6)
  • 0.031 (8)
  • 0.0312 (8)
  • 0.0313 (10)
  • 0.0315 (2)
  • 0.0469 (10)
  • 0.047 (6)
  • 0.0472 (2)
  • 0.0625 (6)
  • 0.063 (6)
  • 0.1563 (2)
  • 0.312 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (4)
  • 241 (2)
  • CL4 (4)
  • CM2 (4)
  • CM3 (4)
  • CM4 (2)
  • CPX (4)
  • CW2 (4)
  • CW2015 (4)
  • CW5025 (6)
  • GX (2)
  • HK1500 (6)
  • HT2 (6)
  • HTX (2)
  • K060 (2)
  • K090 (4)
  • K1 (2)
  • K10M (6)
  • K10P (8)
  • K10U (4)
  • K15U (6)
  • K20K (6)
  • K21 (2)
  • K25M (10)
  • K25P (8)
  • K313 (8)
  • K35P (2)
  • K420 (2)
  • K45 (2)
  • K68 (4)
  • KB1340 (4)
  • KB1345 (2)
  • KB1610 (4)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (4)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (6)
  • KB9640 (6)
  • KBH10 (6)
  • KBH10B (4)
  • KBH20 (6)
  • KBH20B (4)
  • KBK35 (2)
  • KC210 (4)
  • KC250 (2)
  • KC5010 (10)
  • KC5025 (8)
  • KC5410 (6)
  • KC5510 (8)
  • KC5525 (8)
  • KC710 (2)
  • KC720 (4)
  • KC722 (2)
  • KC730 (8)
  • KC7310 (10)
  • KC732 (4)
  • KC8050 (10)
  • KC810 (8)
  • KC850 (10)
  • KC9010 (10)
  • KC9025 (10)
  • KC910 (6)
  • KC9105 (8)
  • KC9110 (10)
  • KC9120 (10)
  • KC9125 (10)
  • KC9140 (10)
  • KC9145 (6)
  • KC9210 (2)
  • KC9215 (10)
  • KC9225 (10)
  • KC9240 (10)
  • KC9240NEW (10)
  • KC9245 (10)
  • KC9315 (10)
  • KC9320 (8)
  • KC9325 (8)
  • KC935 (10)
  • KC950 (6)
  • KC990 (10)
  • KCK05 (10)
  • KCK05B (8)
  • KCK15 (8)
  • KCK15B (10)
  • KCK20 (8)
  • KCK20B (8)
  • KCM15 (10)
  • KCM15B (10)
  • KCM25 (10)
  • KCM25B (8)
  • KCM35 (6)
  • KCM35B (6)
  • KCP05 (8)
  • KCP05B (8)
  • KCP10 (10)
  • KCP10B (10)
  • KCP25 (10)
  • KCP25B (10)
  • KCP30 (10)
  • KCP30B (6)
  • KCP40 (6)
  • KCP40B (8)
  • KCPK05 (8)
  • KCS10 (2)
  • KCS10B (8)
  • KCU10 (10)
  • KCU25 (8)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (4)
  • KD1405 (2)
  • KD1425 (4)
  • KM1 (2)
  • KMF (2)
  • KT1120 (2)
  • KT125 (4)
  • KT150 (2)
  • KT175 (4)
  • KT315 (10)
  • KT325 (6)
  • KU10T (8)
  • KU30T (8)
  • KY1310 (4)
  • KY1320 (6)
  • KY1540 (2)
  • KY1615 (4)
  • KY2000 (2)
  • KY2100 (2)
  • KY3000 (4)
  • KY3400 (4)
  • KY3500 (6)
  • KY4000 (2)
  • KY4300 (2)
  • KY4400 (6)
  • KYHK15B (6)
  • KYK10 (4)
  • KYK25 (4)
  • KYK35 (6)
  • KYS25 (2)
  • KYS30 (4)
  • NL200 (4)
  • NL250 (8)
  • NL300 (4)
  • NL400 (4)
  • NL920 (6)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (6)
  • SP0819 (6)
  • SP3019 (4)
  • SP4019 (2)
  • THM (2)
  • THM-X (4)
  • THMF-X (2)
  • TN10P (10)
  • TN10U (6)
  • TN15M (8)
  • TN15U (6)
  • TN2000 (6)
  • TN20K (6)
  • TN20P (10)
  • TN30M (10)
  • TN30P (6)
  • TN4000 (6)
  • TN5015 (8)
  • TN5020 (8)
  • TN5105 (8)
  • TN5120 (8)
  • TN6010 (4)
  • TN6025 (6)
  • TN7005 (10)
  • TN7010 (10)
  • TN7015 (10)
  • TN7025 (10)
  • TN7035 (6)
  • TN7105 (8)
  • TN7110 (8)
  • TN7115 (8)
  • TN7125 (8)
  • TN7135 (6)
  • TN8025 (8)
  • TTI15 (6)
  • TTR (2)
  • TTS (4)
  • TTX (4)
  • WBH10C (4)
  • WBH10P (2)
  • WBH10U (2)
  • WBH25P (2)
  • WBH25U (4)
  • WBH30P (2)
  • WBK40U (4)
  • WBK45U (4)
  • WDN00U (2)
  • WDN25U (4)
  • WK05CT (8)
  • WK15CT (6)
  • WK20CT (8)
  • WM15CT (8)
  • WM25CT (8)
  • WM35CT (8)
  • WP05CT (4)
  • WP15CT (8)
  • WP20TT (2)
  • WP25CT (8)
  • WP35CT (8)
  • WS10PT (8)
  • WS25PT (8)
  • WU10HT (8)
  • X00511 (2)
Hand Of Tool
  • L (5)
  • R (5)
Wiper Insert
  • N (10)
  • Y (8)
Minimum Axial Groove Diameter
  • 0.9843 (2)
  • 1.2598 (4)
  • 1.2992 (2)
  • 1.9685 (2)
to
Minimum Axial Groove Diameter
  • 25.0 (2)
  • 32.0 (4)
  • 33.0 (2)
  • 50.0 (2)
to
Cutting Direction
  • B (6)
  • E (4)
Rake Angle Style
  • DOUBLE NEGATIVE (10)
Maximum Bore Depth
  • 56.0 (2)
  • 66.0 (6)
  • 118.0 (2)
to
Maximum Bore Depth
  • 2.2047 (2)
  • 2.5984 (6)
  • 4.6457 (2)
to
Boring Bar Material
  • S (10)
frontEnd
Clamp Style
  • D (10)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (4)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
  • B H (8)
  • B L (6)
  • C A (6)
  • C N (6)
  • D P (6)
  • H T (10)
  • H W (10)
backEnd
Connection Type
  • TAPER SHANK (10)
System Size
  • PSC50 (10)
Back-End Diameter
  • 1.9685 (10)
to
Back-End Diameter
  • 50.0 (10)
to
other
Platform
  • PSC50 (10)
Tool Unit
  • M (10)
Over All Length [L]
  • 80.0 (2)
  • 90.0 (6)
  • 140.0 (2)
to
Over All Length [L]
  • 3.1496 (2)
  • 3.5433 (6)
  • 5.5118 (2)
to
Insert Hand
  • N (10)
Display Obsolete Products
  • false (10)
  • true (10)
Cutting Condition Material
  • H-All (6)
  • K-All (10)
  • K1 (4)
  • M-All (10)
  • N-All (8)
  • P-All (10)
  • S-All (8)
  • S4 (2)
No filters matching ""
View Products in
Metric
Inch
PSC50

Schneidköpfe zur Innenbearbeitung • D-Klemmung
(4 Products)
  • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Shank - PSCShank - PSC
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6330407 PSC50S20FDCLNL09 PSC50S20FDCLNL09 20.0000 .7874 80.0000 3.149 56.0000 2.204 13.0000 .5118 25.0000 .9843 CN..090308/CN..322 0.68
    6330409 PSC50S20FDCLNR09 PSC50S20FDCLNR09 20.0000 .7874 80.0000 3.149 56.0000 2.204 13.0000 .5118 25.0000 .9843 CN..090308/CN..322 0.68
      6330408 PSC50S25GDCLNL12 PSC50S25GDCLNL12 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 0.80
        6330410 PSC50S25GDCLNR12 PSC50S25GDCLNR12 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 0.80
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          PSC50

          Schneidköpfe zur Innenbearbeitung • D-Klemmung
          (4 Products)
          • Shank - PSCShank - PSC
          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
          • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
          6330421 PSC50S25GDDUNL11 PSC50S25GDDUNL11 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 0.95
            6330423 PSC50S25GDDUNR11 PSC50S25GDDUNR11 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 0.95
              6330422 PSC50S40LDDUNL15 PSC50S40LDDUNL15 40.0000 1.574 140.0000 5.511 118.0000 4.645 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.64
                6330424 PSC50S40LDDUNR15 PSC50S40LDDUNR15 40.0000 1.574 140.0000 5.511 118.0000 4.645 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.64
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty
                  PSC50

                  Schneidköpfe • D-Klemmung
                  (2 Products)
                  • Shank - PSCShank - PSC
                  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
                  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
                  • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                  6330425 PSC50S25GDWLNL08 PSC50S25GDWLNL08 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 33.0000 1.299 WN..080408/WN..432 0.80
                    6330426 PSC50S25GDWLNR08 PSC50S25GDWLNR08 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 33.0000 1.299 WN..080408/WN..432 0.80
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                      You are about to create a duplicate . Do you want to proceed?
                      You are about to delete Do you want to proceed?
                      What would you like to rename your to?
                      Please enter a valid name
                      Please enter a name for the duplicate
                      Please enter a valid name
                      You are about to add to your My Solutions page. Do you want to proceed?
                      Please enter a valid name
                      Send a copy of

                      Please enter a valid Email
                      Please enter a valid name

                      We have found the following CAD Drawings

                      Select the files you are looking for and download them all at once

                      You should be logged to see your dashboard information
                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                      item(s) successfully added to the cart
                      View Cart