successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (10)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (10)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum
      (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (10)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (10)
    • N6
      Carbon, Graphite Composites, CFRP
      (10)
    • N7
      MMC's
      (10)
  • S High-Temp Alloys (10)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (10)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
    • H3
      Hardened Materials 56-60 HRC
      (10)
    • H4
      Hardened Materials >60 HRC
      (10)
Applications
  • Back Boring Back Boring (10)
  • Deep Grooving Deep Grooving (10)
  • Face Grooving Face Grooving (10)
  • Grooving Grooving (10)
  • ID Grooving ID Grooving (10)
  • Plunge Turning Plunge Turning (10)
  • Profiling Profiling (10)
  • TRN Boring TRN Boring (10)
Type of Thread
  • 60 (10)
  • ACME (10)
  • API (10)
  • API RD (6)
  • BSW (6)
  • BUTTRESS (10)
  • M (6)
  • NPT (6)
  • STUB ACME (6)
  • UN (10)
  • UNJ (6)
Cutting Condition
  • Heavily Interrupted Cut (10)
  • Lightly Interrupted Cut (10)
  • Smooth Cut (10)
  • Varying Depth of Cut (10)
Tool Cutting Edge Angle
  • 45.0 (2)
  • 90.0 (8)
to
Cutting Edges Per Insert
  • 1.0 (10)
  • 2.0 (10)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (3)
  • 0.051 (3)
  • 0.057 (3)
  • 0.066 (6)
  • 0.076 (10)
  • 0.08 (6)
  • 0.089 (3)
  • 0.09 (3)
  • 0.094 (6)
  • 0.097 (3)
  • 0.1 (6)
  • 0.102 (6)
  • 0.116 (3)
  • 0.117 (3)
  • 0.127 (6)
  • 0.131 (6)
  • 0.132 (6)
  • 0.133 (6)
  • 0.15 (6)
  • 0.155 (6)
  • 0.157 (6)
  • 0.16 (4)
  • 0.165 (10)
  • 0.173 (6)
  • 0.178 (6)
  • 0.19 (10)
  • 0.191 (10)
  • 0.198 (6)
  • 0.2 (6)
  • 0.202 (6)
  • 0.224 (6)
  • 0.235 (6)
  • 0.244 (3)
  • 0.25 (6)
  • 0.251 (6)
  • 0.254 (10)
  • 0.255 (3)
  • 0.269 (6)
  • 0.282 (6)
  • 0.284 (6)
  • 0.3 (6)
  • 0.315 (8)
  • 0.318 (10)
  • 0.33 (6)
  • 0.34 (6)
  • 0.343 (7)
  • 0.356 (6)
  • 0.404 (6)
  • 0.406 (6)
  • 0.43 (6)
  • 0.445 (10)
  • 0.472 (3)
  • 0.49 (6)
  • 0.508 (6)
  • 0.565 (2)
  • 0.57 (3)
  • 0.572 (10)
  • 0.575 (7)
  • 0.787 (6)
  • 0.902 (10)
  • 1.0 (6)
  • 1.194 (6)
  • 1.195 (3)
  • 1.25 (6)
  • 1.5 (6)
  • 1.585 (6)
  • 1.588 (10)
  • 1.59 (2)
  • 1.75 (6)
  • 1.98 (3)
  • 1.981 (6)
  • 2.0 (10)
  • 2.25 (10)
  • 2.388 (10)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (3)
  • 0.0023 (3)
  • 0.0026 (6)
  • 0.003 (10)
  • 0.0031 (6)
  • 0.0035 (3)
  • 0.0037 (6)
  • 0.0038 (3)
  • 0.004 (6)
  • 0.0046 (6)
  • 0.005 (6)
  • 0.0052 (6)
  • 0.0053 (6)
  • 0.0059 (6)
  • 0.006 (6)
  • 0.0062 (6)
  • 0.0065 (10)
  • 0.0068 (6)
  • 0.007 (6)
  • 0.0075 (10)
  • 0.0078 (6)
  • 0.0079 (3)
  • 0.008 (6)
  • 0.0088 (6)
  • 0.0093 (6)
  • 0.0096 (3)
  • 0.0099 (6)
  • 0.01 (10)
  • 0.0106 (6)
  • 0.0111 (6)
  • 0.0112 (6)
  • 0.0118 (6)
  • 0.0124 (6)
  • 0.0125 (10)
  • 0.013 (6)
  • 0.0135 (10)
  • 0.014 (6)
  • 0.0159 (6)
  • 0.016 (6)
  • 0.017 (6)
  • 0.0175 (10)
  • 0.0186 (3)
  • 0.0193 (6)
  • 0.02 (6)
  • 0.0225 (10)
  • 0.031 (6)
  • 0.0355 (10)
  • 0.0394 (6)
  • 0.047 (6)
  • 0.0492 (6)
  • 0.0591 (6)
  • 0.0625 (10)
  • 0.0689 (6)
  • 0.078 (6)
  • 0.0787 (10)
  • 0.0886 (10)
  • 0.094 (10)
  • 0.0984 (4)
  • 0.106 (3)
  • 0.125 (4)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (6)
  • K313 (10)
  • K420 (10)
  • K4H (6)
  • K68 (10)
  • KB1345 (10)
  • KB1630 (10)
  • KB5625 (6)
  • KC250 (6)
  • KC5010 (10)
  • KC5025 (10)
  • KC5410 (10)
  • KC710 (10)
  • KC720 (10)
  • KC722 (10)
  • KC730 (10)
  • KC732 (6)
  • KC810 (10)
  • KC850 (10)
  • KC910 (6)
  • KC9110 (10)
  • KC9120 (6)
  • KC9320 (10)
  • KC935 (10)
  • KC950 (10)
  • KCK20 (10)
  • KCK20B (10)
  • KCP10B (10)
  • KCP25B (10)
  • KCU10 (10)
  • KCU25 (10)
  • KD050 (3)
  • KD081 (6)
  • KD100 (8)
  • KD120 (10)
  • KD1425 (6)
  • KT175 (6)
  • KT315 (10)
  • KU10T (10)
  • KU25T (10)
  • KU30T (10)
  • KY3000 (10)
  • THM (6)
  • TN10P (8)
  • TN6010 (10)
  • TN6025 (10)
  • TN7110 (10)
  • WU10HT (3)
  • WU10PT (4)
  • WU25PT (3)
Wiper Insert
  • N (10)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.626 (2)
  • 1.874 (2)
  • 2.252 (2)
  • 2.4409 (4)
  • 2.5197 (2)
  • 3.5 (2)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 41.3 (2)
  • 47.6 (2)
  • 57.2 (2)
  • 62.0 (4)
  • 64.0 (2)
  • 88.9 (2)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (10)
to
Maximum Axial Groove Diameter
  • 393.661 (10)
to
Maximum Bore Depth
  • 52.0 (6)
to
Maximum Bore Depth
  • 2.0472 (6)
to
frontEnd
Clamp Style
  • N (10)
Insert Shape
  • TN-TOP NOTCH (10)
Cutting Width
  • 1.0 (6)
  • 1.19 (3)
  • 1.194 (6)
  • 1.2 (6)
  • 1.5 (6)
  • 1.57 (6)
  • 1.575 (6)
  • 1.75 (6)
  • 1.829 (6)
  • 1.981 (6)
  • 2.0 (6)
  • 2.2 (6)
  • 2.235 (6)
  • 2.24 (3)
  • 2.25 (3)
  • 2.388 (6)
  • 2.39 (3)
  • 2.464 (6)
  • 2.5 (6)
  • 2.667 (6)
  • 2.743 (6)
  • 2.75 (6)
  • 2.794 (6)
  • 2.997 (6)
  • 3.0 (10)
  • 3.099 (6)
  • 3.17 (6)
  • 3.175 (10)
  • 3.18 (2)
  • 3.2 (10)
  • 3.25 (6)
  • 3.251 (6)
  • 3.32 (3)
  • 3.329 (3)
  • 3.5 (10)
  • 3.607 (6)
  • 3.96 (6)
  • 3.962 (6)
  • 3.974 (3)
  • 3.988 (6)
  • 4.0 (10)
  • 4.24 (3)
  • 4.242 (10)
  • 4.25 (3)
  • 4.3 (6)
  • 4.5 (10)
  • 4.521 (6)
  • 4.699 (8)
  • 4.775 (10)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (6)
  • 4.801 (10)
  • 4.81 (6)
  • 4.88 (3)
  • 4.95 (6)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)
to
Cutting Width
  • 0.0394 (6)
  • 0.047 (6)
  • 0.0472 (6)
  • 0.0591 (6)
  • 0.062 (6)
  • 0.0689 (6)
  • 0.072 (6)
  • 0.078 (6)
  • 0.0787 (6)
  • 0.079 (3)
  • 0.0866 (6)
  • 0.088 (6)
  • 0.0886 (3)
  • 0.094 (6)
  • 0.097 (6)
  • 0.0984 (6)
  • 0.105 (6)
  • 0.108 (6)
  • 0.1083 (6)
  • 0.11 (6)
  • 0.118 (6)
  • 0.1181 (10)
  • 0.122 (6)
  • 0.125 (10)
  • 0.126 (10)
  • 0.128 (6)
  • 0.131 (3)
  • 0.1378 (10)
  • 0.142 (6)
  • 0.156 (6)
  • 0.157 (6)
  • 0.1574 (10)
  • 0.1575 (10)
  • 0.167 (10)
  • 0.1673 (3)
  • 0.169 (6)
  • 0.1771 (10)
  • 0.1772 (10)
  • 0.178 (6)
  • 0.185 (8)
  • 0.188 (10)
  • 0.189 (10)
  • 0.192 (3)
  • 0.195 (6)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.219 (4)
  • 0.2362 (4)
  • 0.25 (4)
  • 0.255 (4)
to
Maximum Cutting Depth
  • 5.33 (4)
  • 7.47 (4)
to
Maximum Cutting Depth
  • 0.2098 (4)
  • 0.2941 (4)
to
Insert Size
  • 3 (6)
  • 4 (4)
insertGeometry
Cutting Tool Material
  • B H (10)
  • B L (6)
  • C N (10)
  • D P (8)
  • H T (10)
  • H W (10)
backEnd
Back-End Diameter
  • 1.9685 (10)
to
Back-End Diameter
  • 50.0 (10)
to
other
Platform
  • PSC50 (10)
Tool Unit
  • M (10)
Over All Length [L]
  • 52.0 (8)
  • 62.0 (2)
to
Over All Length [L]
  • 2.0472 (8)
  • 2.4409 (2)
to
Insert Hand
  • L (5)
  • R (5)
Cutting Condition Material
  • H-All (10)
  • K-All (10)
  • M-All (10)
  • N-All (10)
  • P-All (10)
  • S-All (10)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
PSC50

Cutting Units • Threading and Grooving
(4 Products)
  • Shank - PSCShank - PSC
  • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6338255 PSC50NEL3 PSC50NEL3 52.0000 2.047 35.0000 1.378 62.0000 2.440 NG3R 0.69
    6338256 PSC50NEL4 PSC50NEL4 52.0000 2.047 35.0000 1.378 62.0000 2.440 NG4R 0.69
      6338254 PSC50NER3 PSC50NER3 52.0000 2.047 35.0000 1.378 62.0000 2.440 NG3L 0.69
        6338257 PSC50NER4 PSC50NER4 52.0000 2.047 35.0000 1.378 62.0000 2.440 NG4L 0.69
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          PSC50

          Cutting Units • Threading and Grooving
          (2 Products)
          • Shank - PSCShank - PSC
          • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
          6338311 PSC50NRL3 PSC50NRL3 52.0000 2.047 35.0000 1.378 64.0000 2.519 NU3R 0.69
            6338312 PSC50NRR3 PSC50NRR3 52.0000 2.047 35.0000 1.378 64.0000 2.519 NU3L 0.69
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              PSC50

              Cutting Units • Threading and Grooving
              (4 Products)
              • Shank - PSCShank - PSC
              • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
              • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
              • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
              6338258 PSC50NSL3 PSC50NSL3 52.0000 2.047 35.0000 1.378 NG3L 0.69
                6338260 PSC50NSL4 PSC50NSL4 62.0000 2.440 35.0000 1.378 NG4L 0.69
                  6338253 PSC50NSR3 PSC50NSR3 52.0000 2.047 35.0000 1.378 NG3R 0.79
                    6338259 PSC50NSR4 PSC50NSR4 62.0000 2.440 35.0000 1.378 NG4R 0.68
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                      You are about to create a duplicate . Do you want to proceed?
                      You are about to delete Do you want to proceed?
                      What would you like to rename your to?
                      Please enter a valid name
                      Please enter a name for the duplicate
                      Please enter a valid name
                      You are about to add to your My Solutions page. Do you want to proceed?
                      Please enter a valid name
                      Send a copy of

                      Please enter a valid Email
                      Please enter a valid name

                      We have found the following CAD Drawings

                      Select the files you are looking for and download them all at once

                      You should be logged to see your dashboard information
                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                      item(s) successfully added to the cart
                      View Cart