successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (21)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (21)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (21)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (21)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (21)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (21)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (21)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (21)
  • M Stainless Steel (21)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (21)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (21)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (21)
  • K Cast Iron (21)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (21)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (21)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (21)
  • N Non-Ferrous Materials (18)
    • N1
      Wrought Aluminum
      (18)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (18)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (18)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (18)
    • N6
      Carbon, Graphite Composites, CFRP
      (16)
    • N7
      MMC's
      (18)
  • S High-Temp Alloys (21)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (21)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (21)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (21)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (21)
  • H Hardened Materials (18)
    • H1
      Hardened Materials 44-48 HRC
      (18)
    • H2
      Hardened Materials 48-55 HRC
      (18)
    • H3
      Hardened Materials 56-60 HRC
      (18)
    • H4
      Hardened Materials >60 HRC
      (10)
Applications
  • Back Boring Back Boring (21)
  • Cut-Off Cut-Off (21)
  • Deep Grooving Deep Grooving (21)
  • Face Grooving Face Grooving (21)
  • Facing Facing (21)
  • Grooving Grooving (21)
  • ID Facing ID Facing (21)
  • ID Grooving ID Grooving (21)
  • ID Thread Turning ID Thread Turning (21)
  • Multiple Direction Cutting Multiple Direction Cutting (21)
  • OD Thread Turning OD Thread Turning (21)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (21)
  • Turning Turning (21)
Cutting Condition
  • Heavily Interrupted Cut (21)
  • Lightly Interrupted Cut (21)
  • Smooth Cut (21)
  • Varying Depth of Cut (21)
Tool Cutting Edge Angle
  • 90.0 (11)
  • 93.0 (4)
  • 95.0 (4)
  • 107.5 (2)
to
Connection Style
  • PSC (21)
Cutting Edges Per Insert
  • 1.0 (19)
  • 2.0 (10)
  • 4.0 (4)
to
cornerConfiguration
Corner Radius
  • 0.03 (2)
  • 0.038 (8)
  • 0.1 (10)
  • 0.2 (10)
  • 0.203 (4)
  • 0.397 (8)
  • 0.4 (10)
  • 0.791 (2)
  • 0.794 (10)
  • 0.8 (10)
  • 1.188 (4)
  • 1.191 (2)
  • 1.2 (10)
  • 1.6 (2)
  • 4.0 (1)
  • 5.0 (2)
  • 6.0 (3)
  • 7.94 (3)
  • 8.0 (3)
  • 10.0 (2)
to
Corner Radius
  • 0.001 (2)
  • 0.0015 (8)
  • 0.004 (10)
  • 0.0078 (2)
  • 0.0079 (2)
  • 0.008 (10)
  • 0.0156 (10)
  • 0.0158 (2)
  • 0.016 (2)
  • 0.0311 (2)
  • 0.0312 (10)
  • 0.0313 (10)
  • 0.0315 (10)
  • 0.0468 (4)
  • 0.0469 (10)
  • 0.047 (2)
  • 0.0472 (2)
  • 0.0625 (2)
  • 0.1575 (1)
  • 0.1969 (2)
  • 0.197 (2)
  • 0.2362 (3)
  • 0.3125 (3)
  • 0.315 (3)
  • 0.3935 (2)
  • 0.3937 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (6)
  • AC5 (6)
  • CG4 (2)
  • CL4 (2)
  • CM3 (9)
  • CM5 (8)
  • CPX (5)
  • GH1 (2)
  • GX (2)
  • HCK10 (7)
  • HK1500 (8)
  • HK35 (4)
  • HT2 (10)
  • HTX (10)
  • HWK10 (1)
  • HWK15 (6)
  • K1010P (2)
  • K10M (8)
  • K10P (2)
  • K10U (8)
  • K15U (8)
  • K20K (4)
  • K313 (18)
  • K420 (4)
  • K68 (16)
  • KB1345 (6)
  • KB1610 (8)
  • KB1625 (6)
  • KB1630 (4)
  • KB5610 (8)
  • KB5625 (8)
  • KB5630 (8)
  • KB9610 (8)
  • KBH10 (8)
  • KBH20 (10)
  • KC5010 (21)
  • KC5020P (6)
  • KC5025 (19)
  • KC5410 (16)
  • KC720 (10)
  • KC730 (18)
  • KC732 (16)
  • KC8050 (21)
  • KC810 (13)
  • KC850 (18)
  • KC9010 (4)
  • KC9025 (10)
  • KC910 (16)
  • KC9105 (10)
  • KC9110 (19)
  • KC9120 (4)
  • KC9125 (19)
  • KC9225 (10)
  • KC9240 (18)
  • KC9240NEW (18)
  • KC9315 (21)
  • KC9320 (15)
  • KC9325 (6)
  • KC935 (10)
  • KC950 (8)
  • KC990 (4)
  • KCD25 (13)
  • KCK05 (10)
  • KCK05B (8)
  • KCK15 (16)
  • KCK15B (20)
  • KCK20 (18)
  • KCK20B (18)
  • KCM15 (10)
  • KCM15B (10)
  • KCM25 (18)
  • KCM25B (13)
  • KCM35 (10)
  • KCM35B (4)
  • KCP05 (10)
  • KCP05B (6)
  • KCP10 (18)
  • KCP10B (18)
  • KCP15 (4)
  • KCP25 (21)
  • KCP25B (19)
  • KCP30 (18)
  • KCP30B (11)
  • KCP40B (4)
  • KCPK05 (8)
  • KCS10 (21)
  • KCS10B (19)
  • KCU10 (21)
  • KCU25 (21)
  • KD050 (6)
  • KD081 (6)
  • KD100 (4)
  • KD1400 (8)
  • KD1405 (4)
  • KD1425 (8)
  • KM1 (2)
  • KT125 (2)
  • KT175 (8)
  • KT315 (10)
  • KT325 (10)
  • KTP10 (8)
  • KU10 (8)
  • KU10T (10)
  • KU30T (10)
  • KY1615 (8)
  • MC2 (5)
  • NL300 (5)
  • NL920 (4)
  • PB100 (2)
  • PB170 (2)
  • PB250 (4)
  • PD100 (6)
  • PD50 (4)
  • SP0PW3 (2)
  • SP4019 (2)
  • SPN3W1 (2)
  • THM (16)
  • THM-X (4)
  • TN10P (10)
  • TN10U (10)
  • TN15M (10)
  • TN15U (8)
  • TN2000 (10)
  • TN20K (10)
  • TN20P (10)
  • TN30M (10)
  • TN4000 (6)
  • TN5015 (12)
  • TN5020 (16)
  • TN5105 (6)
  • TN5120 (19)
  • TN6010 (6)
  • TN6025 (4)
  • TN7005 (8)
  • TN7010 (16)
  • TN7015 (16)
  • TN7025 (16)
  • TN7035 (15)
  • TN7105 (16)
  • TN7110 (19)
  • TN7115 (19)
  • TN7125 (16)
  • TN7135 (18)
  • TN8025 (6)
  • TTI15 (11)
  • TTM (2)
  • TTM09 (6)
  • TTR (8)
  • TTS (2)
  • TTX (8)
  • W00342 (4)
  • WBH10C (8)
  • WBH10P (8)
  • WBH10U (8)
  • WBH25P (8)
  • WBH25U (6)
  • WBH30P (8)
  • WBK45U (6)
  • WDN00U (2)
  • WDN25U (8)
  • WK05CT (6)
  • WK15CT (10)
  • WK20CT (19)
  • WM15CT (10)
  • WM25CT (10)
  • WP15CT (19)
  • WP20TT (6)
  • WP25CT (16)
  • WP35CT (18)
  • WS10PT (6)
  • WS25PT (4)
  • WU10HT (13)
Hand Of Tool
  • L (9)
  • N (4)
  • R (8)
Wiper Insert
  • N (21)
  • Y (6)
Minimum Axial Groove Diameter
  • 3.1496 (2)
  • 4.3307 (8)
to
Minimum Axial Groove Diameter
  • 80.0 (2)
  • 110.0 (8)
to
Cutting Direction
  • B (3)
  • E (11)
  • S (7)
Rake Angle Style
  • NEUTRAL (ZERO) (21)
Maximum Bore Depth
  • 60.0 (10)
to
Maximum Bore Depth
  • 2.3622 (10)
to
Boring Bar Material
  • S (17)
frontEnd
Clamp Style
  • S (21)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (2)
  • R-ROUND (11)
  • V-DIAMOND/RHOMBIC 35 (4)
Maximum Cutting Depth
  • 16.0 (1)
  • 25.0 (1)
  • 28.0 (1)
  • 32.0 (1)
to
Maximum Cutting Depth
  • 0.6299 (1)
  • 0.9843 (1)
  • 1.1024 (1)
  • 1.2598 (1)
to
insertGeometry
Cutting Tool Material
  • B H (10)
  • B L (10)
  • C A (8)
  • C N (2)
  • D P (10)
  • H T (18)
  • H W (21)
backEnd
Connection Type
  • TAPER SHANK (21)
System Size
  • PSC50 (4)
Back-End Diameter
  • 1.9685 (21)
to
Back-End Diameter
  • 50.0 (21)
to
other
Platform
  • PSC50 (21)
Tool Unit
  • M (21)
Over All Length [L]
  • 60.0 (21)
to
Over All Length [L]
  • 2.3622 (21)
to
Insert Hand
  • L (6)
  • N (21)
  • R (10)
Display Obsolete Products
  • false (21)
  • true (21)
Cutting Condition Material
  • H-All (18)
  • K-All (21)
  • M-All (21)
  • N-All (18)
  • P-All (21)
  • S-All (21)
  • S4 (4)
No filters matching ""
View Products in
Metric
Inch
PSC50

Schneidköpfe • S-Klemmung
(4 Products)
  • Shank - PSCShank - PSC
  • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
  • Kühlmittel –  Innere KühlmittelzuführungKühlmittel – Innere Kühlmittelzuführung
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6330428 PSC50SCLCL09 PSC50SCLCL09 60.0000 2.362 35.0000 1.378 80.0000 3.149 CC..09T308/CC..3252 0.84
    6330429 PSC50SCLCL12 PSC50SCLCL12 60.0000 2.362 35.0000 1.378 110.0000 4.330 CC..120408/CC..432 0.86
      6330430 PSC50SCLCR09 PSC50SCLCR09 60.0000 2.362 35.0000 1.378 80.0000 3.149 CC..09T308/CC..3252 0.84
        6330451 PSC50SCLCR12 PSC50SCLCR12 60.0000 2.362 35.0000 1.378 110.0000 4.330 CC..120408/CC..432 0.86
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          PSC50

          Schneidköpfe • S-Klemmung
          (2 Products)
          • Shank - PSCShank - PSC
          • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
          • Kühlmittel –  Innere KühlmittelzuführungKühlmittel – Innere Kühlmittelzuführung
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
          6330452 PSC50SDJCL11 PSC50SDJCL11 60.0000 2.362 35.0000 1.378 110.0000 4.330 DC..11T308/DC..3252 0.85
            6330453 PSC50SDJCR11 PSC50SDJCR11 60.0000 2.362 35.0000 1.378 110.0000 4.330 DC..11T308/DC..3252 0.85
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              PSC50

              Schneidköpfe • S-Klemmung
              (4 Products)
              • Shank - PSCShank - PSC
              • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
              • Kühlmittel –  Innere KühlmittelzuführungKühlmittel – Innere Kühlmittelzuführung
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CD] Cutting Depth [CD] Cutting Depth Gage Insert Weight Kilograms
              6334640 PSC50SRDCN08 PSC50SRDCN08 60.0000 2.362 4.0000 .1575 16.0000 .6299 RC..0803M0 0.67
                6334781 PSC50SRDCN10 PSC50SRDCN10 60.0000 2.362 5.0000 .1969 25.0000 .9843 RC..10T3M0 0.63
                  6334782 PSC50SRDCN12 PSC50SRDCN12 60.0000 2.362 6.0000 .2362 28.0000 1.102 RC..1204M0 0.63
                    6334783 PSC50SRDCN16 PSC50SRDCN16 60.0000 2.362 8.0000 .3150 32.0000 1.259 RC..1606M0 0.63
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      PSC50

                      Schneidköpfe • S-Klemmung
                      (7 Products)
                      • Shank - PSCShank - PSC
                      • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
                      • Kühlmittel –  Innere KühlmittelzuführungKühlmittel – Innere Kühlmittelzuführung
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                      6330454 PSC50SRSCL10 PSC50SRSCL10 60.0000 2.362 35.0000 1.378 RC..10T3M0 0.73
                        6330455 PSC50SRSCL12 PSC50SRSCL12 60.0000 2.362 35.0000 1.378 RC..1204M0 0.74
                          6330456 PSC50SRSCL16 PSC50SRSCL16 60.0000 2.362 35.0000 1.378 RC..1606M0 0.76
                            6330457 PSC50SRSCL20 PSC50SRSCL20 60.0000 2.362 35.0000 1.378 RC..2006M0 0.81
                              6330458 PSC50SRSCR12 PSC50SRSCR12 60.0000 2.362 35.0000 1.378 RC..1204N0 0.74
                                6330459 PSC50SRSCR16 PSC50SRSCR16 60.0000 2.362 35.0000 1.378 RC..1606M0 0.76
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  PSC50

                                  Schneidköpfe • S-Klemmung
                                  (2 Products)
                                  • Shank - PSCShank - PSC
                                  • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
                                  • Kühlmittel –  Innere KühlmittelzuführungKühlmittel – Innere Kühlmittelzuführung
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                  6330471 PSC50SVHBL16 PSC50SVHBL16 60.0000 2.362 35.0000 1.378 110.0000 4.330 VB..160408/VB..332 0.75
                                    6330472 PSC50SVHBR16 PSC50SVHBR16 60.0000 2.362 35.0000 1.378 110.0000 4.330 VB..160408/VB..332 0.76
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      PSC50

                                      Schneidköpfe • S-Klemmung
                                      (2 Products)
                                      • Shank - PSCShank - PSC
                                      • Herstellerspezifikationen: ISO 26623Herstellerspezifikationen: ISO 26623
                                      • Kühlmittel –  Innere KühlmittelzuführungKühlmittel – Innere Kühlmittelzuführung
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                      6330473 PSC50SVJBL16 PSC50SVJBL16 60.0000 2.362 35.0000 1.378 110.0000 4.330 VB..160408/VB..332 0.77
                                        6330474 PSC50SVJBR16 PSC50SVJBR16 60.0000 2.362 35.0000 1.378 110.0000 4.330 VB..160408/VB..332 0.77
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor
                                          Qty
                                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                          You are about to create a duplicate . Do you want to proceed?
                                          You are about to delete Do you want to proceed?
                                          What would you like to rename your to?
                                          Please enter a valid name
                                          Please enter a name for the duplicate
                                          Please enter a valid name
                                          You are about to add to your My Solutions page. Do you want to proceed?
                                          Please enter a valid name
                                          Send a copy of

                                          Please enter a valid Email
                                          Please enter a valid name

                                          We have found the following CAD Drawings

                                          Select the files you are looking for and download them all at once

                                          You should be logged to see your dashboard information
                                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                          item(s) successfully added to the cart
                                          View Cart