successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (11)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11)
  • M Stainless Steel (11)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (11)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (11)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (11)
  • K Cast Iron (11)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (11)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (11)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (11)
  • N Non-Ferrous Materials (11)
    • N1
      Wrought Aluminum
      (11)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (11)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (11)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (11)
    • N6
      Carbon, Graphite Composites, CFRP
      (8)
    • N7
      MMC's
      (11)
  • S High-Temp Alloys (11)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (11)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (11)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (11)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (11)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
  • Back Boring Back Boring (11)
  • Chamfer Turning Chamfer Turning (11)
  • Cut-Off Cut-Off (11)
  • Deep Grooving Deep Grooving (11)
  • Face Grooving Face Grooving (11)
  • Facing Facing (11)
  • Grooving Grooving (11)
  • ID Facing ID Facing (11)
  • ID Grooving ID Grooving (11)
  • Multiple Direction Cutting Multiple Direction Cutting (11)
  • Plunge Turning Plunge Turning (11)
  • Profiling Profiling (11)
  • TRN Boring TRN Boring (11)
  • Turning Turning (11)
Cutting Condition
  • Heavily Interrupted Cut (11)
  • Lightly Interrupted Cut (11)
  • Smooth Cut (11)
  • Varying Depth of Cut (11)
Tool Cutting Edge Angle
  • 90.0 (7)
  • 93.0 (2)
  • 95.0 (2)
to
Cutting Edges Per Insert
  • 1.0 (9)
  • 2.0 (4)
  • 3.0 (4)
  • 4.0 (2)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.038 (6)
  • 0.1 (8)
  • 0.2 (8)
  • 0.394 (4)
  • 0.397 (6)
  • 0.4 (8)
  • 0.794 (8)
  • 0.8 (8)
  • 1.188 (2)
  • 1.2 (8)
  • 8.0 (3)
to
Corner Radius
  • 0.0015 (6)
  • 0.004 (8)
  • 0.008 (8)
  • 0.0155 (4)
  • 0.0156 (8)
  • 0.0158 (6)
  • 0.016 (2)
  • 0.0312 (8)
  • 0.0313 (8)
  • 0.0315 (4)
  • 0.0468 (2)
  • 0.0469 (8)
  • 0.047 (2)
  • 0.315 (3)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • HCK10 (2)
  • HK1500 (2)
  • HK35 (2)
  • HT2 (8)
  • HTX (8)
  • HWK15 (2)
  • K10M (8)
  • K10P (6)
  • K10U (6)
  • K15U (6)
  • K20K (6)
  • K313 (11)
  • K68 (8)
  • KB1345 (2)
  • KB1610 (2)
  • KB1625 (6)
  • KB1630 (2)
  • KB5610 (6)
  • KB5625 (6)
  • KB5630 (2)
  • KB9610 (6)
  • KBH10 (2)
  • KBH20 (4)
  • KC5010 (11)
  • KC5020P (2)
  • KC5025 (8)
  • KC5410 (8)
  • KC720 (8)
  • KC730 (11)
  • KC732 (8)
  • KC8050 (11)
  • KC810 (8)
  • KC850 (11)
  • KC9025 (8)
  • KC910 (8)
  • KC9105 (8)
  • KC9110 (8)
  • KC9120 (4)
  • KC9125 (8)
  • KC9225 (8)
  • KC9240 (11)
  • KC9240NEW (11)
  • KC9315 (11)
  • KC9320 (8)
  • KC9325 (6)
  • KC935 (8)
  • KC950 (6)
  • KC990 (4)
  • KCD25 (8)
  • KCK05 (8)
  • KCK05B (6)
  • KCK15 (8)
  • KCK15B (8)
  • KCK20 (11)
  • KCK20B (11)
  • KCM15 (8)
  • KCM15B (4)
  • KCM25 (11)
  • KCM25B (8)
  • KCM35 (8)
  • KCM35B (4)
  • KCP05 (8)
  • KCP05B (2)
  • KCP10 (8)
  • KCP10B (8)
  • KCP15 (2)
  • KCP25 (11)
  • KCP25B (8)
  • KCP30 (8)
  • KCP30B (2)
  • KCP40B (2)
  • KCS10 (8)
  • KCS10B (8)
  • KCU10 (11)
  • KCU25 (8)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD1400 (6)
  • KD1405 (2)
  • KD1425 (6)
  • KT175 (2)
  • KT315 (8)
  • KT325 (8)
  • KTP10 (6)
  • KU10 (2)
  • KU10T (8)
  • KU30T (8)
  • NL300 (2)
  • NL920 (2)
  • PB100 (4)
  • PB170 (6)
  • PB250 (6)
  • PD100 (2)
  • PD50 (2)
  • SP0PW3 (2)
  • SP4019 (2)
  • THM (8)
  • THM-X (2)
  • TN10P (8)
  • TN10U (8)
  • TN15M (8)
  • TN15U (6)
  • TN2000 (4)
  • TN20K (8)
  • TN20P (8)
  • TN30M (8)
  • TN4000 (2)
  • TN5015 (6)
  • TN5020 (8)
  • TN5105 (6)
  • TN5120 (8)
  • TN6010 (6)
  • TN6025 (4)
  • TN7005 (6)
  • TN7010 (8)
  • TN7015 (8)
  • TN7025 (8)
  • TN7035 (8)
  • TN7105 (8)
  • TN7110 (8)
  • TN7115 (8)
  • TN7125 (8)
  • TN7135 (8)
  • TN8025 (6)
  • TTI15 (2)
  • TTM09 (4)
  • TTR (6)
  • TTX (2)
  • W00342 (2)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH25P (2)
  • WBH25U (6)
  • WBH30P (2)
  • WBK45U (6)
  • WDN25U (6)
  • WK05CT (6)
  • WK15CT (8)
  • WK20CT (8)
  • WM15CT (8)
  • WM25CT (8)
  • WP15CT (8)
  • WP20TT (2)
  • WP25CT (8)
  • WP35CT (4)
  • WS10PT (6)
  • WS25PT (4)
Wiper Insert
  • N (11)
  • Y (2)
Minimum Axial Groove Diameter
  • 3.386 (4)
to
Minimum Axial Groove Diameter
  • 86.0 (4)
to
Maximum Bore Depth
  • 70.0 (4)
to
Maximum Bore Depth
  • 2.756 (4)
to
frontEnd
Clamp Style
  • S (11)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • R-ROUND (3)
  • T-TRIANGLE 60 (4)
  • V-DIAMOND/RHOMBIC 35 (2)
Maximum Cutting Depth
  • 33.0 (1)
to
Maximum Cutting Depth
  • 1.299 (1)
to
insertGeometry
Cutting Tool Material
  • B H (8)
  • B L (8)
  • D P (8)
  • H T (8)
  • H W (11)
backEnd
Back-End Diameter
  • 2.5 (11)
to
Back-End Diameter
  • 63.0 (11)
to
other
Platform
  • KM4X63 (11)
Tool Unit
  • M (11)
Over All Length [L]
  • 70.0 (11)
to
Over All Length [L]
  • 2.756 (11)
to
Insert Hand
  • L (2)
  • N (11)
  • R (4)
Cutting Condition Material
  • H-All (7)
  • K-All (11)
  • M-All (11)
  • N-All (11)
  • P-All (11)
  • S-All (11)
  • S4 (2)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM4X63 Schneidköpfe

(2 Products)
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
  • Shank: KM4X™Shank: KM4X™
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
5552435 KM4X63SCLCL12 KM4X63SCLCL12 70.0000 2.756 43.0000 1.693 86.0000 3.386 CC..120408/CC..432 1.40 3.09
    5552437 KM4X63SCLCR12 KM4X63SCLCR12 70.0000 2.756 43.0000 1.693 86.0000 3.386 CC..120408/CC..432 1.40 3.09
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      KM4X63 Schneidköpfe

      (1 Products)
      • Shank: KM4X™Shank: KM4X™
      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CD] Cutting Depth [CD] Cutting Depth Gage Insert Weight Kilograms Weight Pounds
      5552441 KM4X63SRDCN16 KM4X63SRDCN16 70.0000 2.756 8.0000 .3150 33.0000 1.299 RC..1605M0 1.01 2.23
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        Qty
        KM4X63 Schneidköpfe

        (2 Products)
        • Shank: KM4X™Shank: KM4X™
        • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
        • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
        5552443 KM4X63SRGCL16 KM4X63SRGCL16 70.0000 2.756 43.0000 1.693 RC..1605M0 1.40 3.08
          5552445 KM4X63SRGCR16 KM4X63SRGCR16 70.0000 2.756 43.0000 1.693 RC..1605M0 1.40 3.08
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty
            KM4X63 Schneidköpfe

            (2 Products)
            • Shank: KM4X™Shank: KM4X™
            • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
            • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
            5552405 KM4X63STFCL16 KM4X63STFCL16 70.0000 2.756 43.0000 1.693 86.0000 3.386 TC..16T308/TC..3252 1.43 3.15
              5552407 KM4X63STFCR16 KM4X63STFCR16 70.0000 2.756 43.0000 1.693 86.0000 3.386 TC..16T308/TC..3252 1.43 3.15
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty
                KM4X63 Schneidköpfe

                (2 Products)
                • Shank: KM4X™Shank: KM4X™
                • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                5552409 KM4X63STGCL16 KM4X63STGCL16 70.0000 2.756 43.0000 1.693 TC..16T308/TC..3252 1.44 3.17
                  5552431 KM4X63STGCR16 KM4X63STGCR16 70.0000 2.756 43.0000 1.693 TC..16T308/TC..3252 1.44 3.17
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty
                    KM4X63 Schneidköpfe

                    (2 Products)
                    • Shank: KM4X™Shank: KM4X™
                    • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                    • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                    5552433 KM4X63SVJBL16 KM4X63SVJBL16 70.0000 2.756 43.0000 1.693 VB..160408/VB..332 1.18 2.61
                      5552439 KM4X63SVJBR16 KM4X63SVJBR16 70.0000 2.756 43.0000 1.693 VB..160408/VB..332 1.18 2.62
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty
                        If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                        You are about to create a duplicate . Do you want to proceed?
                        You are about to delete Do you want to proceed?
                        What would you like to rename your to?
                        Please enter a valid name
                        Please enter a name for the duplicate
                        Please enter a valid name
                        You are about to add to your My Solutions page. Do you want to proceed?
                        Please enter a valid name
                        Send a copy of

                        Please enter a valid Email
                        Please enter a valid name

                        We have found the following CAD Drawings

                        Select the files you are looking for and download them all at once

                        You should be logged to see your dashboard information
                        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                        item(s) successfully added to the cart
                        View Cart