successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (3)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3)
  • M Stainless Steel (1)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1)
  • K Cast Iron (3)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum
      (1)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1)
    • N7
      MMC's
      (1)
  • S High-Temp Alloys (1)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1)
  • H Hardened Materials (1)
    • H1
      Hardened Materials 44-48 HRC
      (1)
    • H2
      Hardened Materials 48-55 HRC
      (1)
    • H3
      Hardened Materials 56-60 HRC
      (1)
Applications
  • Back Boring Back Boring (3)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (3)
  • Blind Hole Finishing Blind Hole Finishing (3)
  • Chamfer Turning Chamfer Turning (3)
  • Cut-Off Cut-Off (3)
  • Deep Grooving Deep Grooving (3)
  • Face Grooving Face Grooving (3)
  • Facing Facing (3)
  • Grooving Grooving (3)
  • ID Facing ID Facing (3)
  • ID Grooving ID Grooving (3)
  • ID Thread Turning ID Thread Turning (3)
  • Multiple Direction Cutting Multiple Direction Cutting (3)
  • OD Thread Turning OD Thread Turning (3)
  • Plunge Turning Plunge Turning (3)
  • Profiling Profiling (3)
  • TRN Boring TRN Boring (3)
  • Threading Threading (3)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (3)
  • Through Hole Finishing Through Hole Finishing (3)
  • Turning Turning (3)
Cutting Condition
  • Heavily Interrupted Cut (1)
  • Lightly Interrupted Cut (1)
  • Smooth Cut (1)
  • Varying Depth of Cut (1)
Tool Cutting Edge Angle
  • 90.0 (3)
to
Cutting Edges Per Insert
  • 1.0 (3)
to
cornerConfiguration
Corner Radius
  • 10.0 (1)
  • 12.5 (1)
  • 16.0 (1)
to
Corner Radius
  • 0.3935 (1)
  • 0.3937 (1)
  • 0.4922 (1)
  • 0.6299 (1)
  • 0.63 (1)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • CG4 (1)
  • CL4 (1)
  • CM3 (1)
  • CM5 (1)
  • CPX (1)
  • GX (1)
  • K313 (1)
  • K420 (2)
  • K68 (1)
  • KC5010 (1)
  • KC730 (1)
  • KC8050 (1)
  • KC850 (1)
  • KC9010 (1)
  • KC9110 (2)
  • KC9125 (2)
  • KC9240 (2)
  • KC9240NEW (2)
  • KC9315 (1)
  • KCK15B (1)
  • KCK20 (1)
  • KCK20B (1)
  • KCM25 (1)
  • KCP10 (2)
  • KCP10B (1)
  • KCP25 (2)
  • KCP25B (2)
  • KCP30 (1)
  • KCPK05 (1)
  • KCS10 (1)
  • KCU10 (1)
  • KCU25 (1)
  • KM1 (1)
  • KY1615 (1)
  • MC2 (1)
  • NL300 (1)
Wiper Insert
  • N (3)
frontEnd
Clamp Style
  • X (3)
Insert Shape
  • R-ROUND (3)
Maximum Cutting Depth
  • 40.15 (1)
  • 50.15 (1)
  • 60.15 (1)
to
Maximum Cutting Depth
  • 1.581 (1)
  • 1.975 (1)
  • 2.368 (1)
to
insertGeometry
Cutting Tool Material
  • C A (1)
  • H T (1)
  • H W (3)
backEnd
Back-End Diameter
  • 3.9 (3)
to
Back-End Diameter
  • 100.0 (3)
to
other
Platform
  • KM4X100 (3)
Tool Unit
  • M (3)
Over All Length [L]
  • 100.0 (2)
  • 110.0 (1)
to
Over All Length [L]
  • 3.937 (2)
  • 4.331 (1)
to
Insert Hand
  • N (3)
Cutting Condition Material
  • H-All (1)
  • K-All (1)
  • M-All (1)
  • N-All (1)
  • P-All (1)
  • S-All (1)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM4X™ 100 Schneidköpfe

P-Klemmung
(3 Products)
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
  • Shank: KM4X™Shank: KM4X™
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CD] Cutting Depth [CD] Cutting Depth Gage Insert Weight Kilograms Weight Pounds
5337750 KM4X100PRDCN20 KM4X100PRDCN20 100.0000 3.937 10.0000 .3940 40.1500 1.581 RCMT2006M0 3.63 8.00
    5337751 KM4X100PRDCN25 KM4X100PRDCN25 100.0000 3.937 12.5000 .4920 50.1500 1.975 RCMT2507M0RP 3.31 7.29
      5337752 KM4X100PRDCN32 KM4X100PRDCN32 110.0000 4.331 16.0000 .6300 60.1500 2.368 RCMX3209M0RP 3.50 7.93
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        Qty
        If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
        You are about to create a duplicate . Do you want to proceed?
        You are about to delete Do you want to proceed?
        What would you like to rename your to?
        Please enter a valid name
        Please enter a name for the duplicate
        Please enter a valid name
        You are about to add to your My Solutions page. Do you want to proceed?
        Please enter a valid name
        Send a copy of

        Please enter a valid Email
        Please enter a valid name

        We have found the following CAD Drawings

        Select the files you are looking for and download them all at once

        You should be logged to see your dashboard information
        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
        item(s) successfully added to the cart
        View Cart