successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (27)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (27)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (27)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (27)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (27)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (27)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (27)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (27)
  • M Stainless Steel (27)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (27)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (27)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (27)
  • K Cast Iron (27)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (27)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (27)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (27)
  • N Non-Ferrous Materials (20)
    • N1
      Wrought Aluminum
      (16)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (16)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (20)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (16)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
    • N7
      MMC's
      (16)
  • S High-Temp Alloys (27)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (27)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (27)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (27)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (27)
  • H Hardened Materials (12)
    • H1
      Hardened Materials 44-48 HRC
      (12)
    • H2
      Hardened Materials 48-55 HRC
      (12)
    • H3
      Hardened Materials 56-60 HRC
      (12)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
  • Back Boring Back Boring (19)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (19)
  • Blind Hole Finishing Blind Hole Finishing (19)
  • Chamfer Turning Chamfer Turning (19)
  • Cut-Off Cut-Off (19)
  • Deep Grooving Deep Grooving (19)
  • Face Grooving Face Grooving (19)
  • Facing Facing (29)
  • Grooving Grooving (19)
  • ID Facing ID Facing (29)
  • ID Grooving ID Grooving (19)
  • ID Thread Turning ID Thread Turning (19)
  • Multiple Direction Cutting Multiple Direction Cutting (29)
  • OD Thread Turning OD Thread Turning (19)
  • Plunge Turning Plunge Turning (19)
  • Profiling Profiling (29)
  • TRN Boring TRN Boring (25)
  • Threading Threading (19)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (19)
  • Through Hole Finishing Through Hole Finishing (19)
  • Turning Turning (29)
Cutting Condition
  • Heavily Interrupted Cut (27)
  • Interrupted (10)
  • Lightly Interrupted Cut (27)
  • Smooth Cut (27)
  • Varying Depth of Cut (27)
Tool Cutting Edge Angle
  • 45.0 (2)
  • 75.0 (11)
  • 90.0 (6)
  • 93.0 (6)
  • 95.0 (4)
to
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (18)
  • 3.0 (2)
  • 4.0 (19)
  • 6.0 (2)
  • 8.0 (19)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (2)
  • 0.2 (2)
  • 0.203 (2)
  • 0.397 (2)
  • 0.4 (2)
  • 0.794 (4)
  • 0.8 (14)
  • 1.191 (14)
  • 1.2 (14)
  • 1.588 (12)
  • 1.6 (19)
  • 2.381 (7)
  • 2.4 (19)
  • 3.2 (9)
  • 4.0 (4)
  • 6.35 (2)
  • 9.525 (2)
  • 12.7 (2)
to
Corner Radius
  • 0.004 (2)
  • 0.008 (2)
  • 0.0156 (2)
  • 0.016 (2)
  • 0.031 (10)
  • 0.0312 (4)
  • 0.0313 (14)
  • 0.0469 (14)
  • 0.047 (10)
  • 0.0625 (19)
  • 0.063 (12)
  • 0.0928 (4)
  • 0.0938 (19)
  • 0.094 (7)
  • 0.125 (5)
  • 0.126 (4)
  • 0.1575 (4)
  • 0.25 (2)
  • 0.375 (2)
  • 0.5 (2)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (8)
  • CL4 (10)
  • CM2 (6)
  • CM3 (10)
  • CPX (10)
  • CW2015 (8)
  • CW5025 (8)
  • GX (10)
  • HK1500 (6)
  • K090 (18)
  • K1 (13)
  • K10M (12)
  • K10P (4)
  • K10U (2)
  • K15U (2)
  • K20K (14)
  • K21 (10)
  • K25M (2)
  • K25P (8)
  • K313 (16)
  • K35P (4)
  • K420 (17)
  • K45 (2)
  • K68 (20)
  • KB1610 (2)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (2)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (2)
  • KB9640 (2)
  • KBH10 (2)
  • KBH10B (2)
  • KBH20 (2)
  • KBH20B (2)
  • KC210 (10)
  • KC250 (12)
  • KC5010 (25)
  • KC5025 (14)
  • KC5410 (14)
  • KC5510 (14)
  • KC5525 (2)
  • KC710 (2)
  • KC720 (6)
  • KC730 (14)
  • KC7310 (12)
  • KC732 (2)
  • KC8050 (27)
  • KC810 (16)
  • KC850 (27)
  • KC9010 (12)
  • KC9025 (25)
  • KC910 (18)
  • KC9105 (8)
  • KC9110 (27)
  • KC9120 (25)
  • KC9125 (27)
  • KC9125RR (4)
  • KC9140 (27)
  • KC9145 (23)
  • KC9215 (12)
  • KC9225 (14)
  • KC9240 (21)
  • KC9240NEW (17)
  • KC9245 (14)
  • KC9315 (20)
  • KC9320 (14)
  • KC9325 (20)
  • KC935 (22)
  • KC950 (21)
  • KC990 (21)
  • KCK05 (14)
  • KCK05B (12)
  • KCK15 (16)
  • KCK15B (16)
  • KCK20 (16)
  • KCK20B (20)
  • KCM15 (14)
  • KCM15B (10)
  • KCM25 (17)
  • KCM25B (17)
  • KCM35 (14)
  • KCM35B (10)
  • KCP05 (2)
  • KCP05B (5)
  • KCP10 (27)
  • KCP10B (19)
  • KCP25 (27)
  • KCP25B (25)
  • KCP30 (27)
  • KCP30B (19)
  • KCP40 (23)
  • KCP40B (23)
  • KCPK05 (12)
  • KCS10B (14)
  • KCU10 (25)
  • KCU25 (14)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (2)
  • KD1405 (2)
  • KD1425 (2)
  • KM1 (4)
  • KT1120 (2)
  • KT125 (2)
  • KT150 (2)
  • KT175 (2)
  • KT315 (2)
  • KU10T (2)
  • KU30T (16)
  • KY1320 (8)
  • KY1540 (6)
  • KY1615 (12)
  • KY2000 (6)
  • KY3000 (14)
  • KY3400 (10)
  • KY3500 (12)
  • KY4000 (2)
  • KY4300 (6)
  • KY4400 (10)
  • KYK25 (6)
  • KYK35 (12)
  • KYS25 (6)
  • KYS30 (6)
  • NL250 (14)
  • NL300 (19)
  • NL400 (9)
  • NL920 (6)
  • SP0819 (10)
  • SP3019 (10)
  • SP4019 (6)
  • SP4036 (2)
  • SP4093 (2)
  • SPADAP (17)
  • SPN4W2 (4)
  • THM (10)
  • TN10P (12)
  • TN10U (2)
  • TN15M (12)
  • TN15U (2)
  • TN2000 (10)
  • TN20K (16)
  • TN20P (18)
  • TN30M (12)
  • TN30P (16)
  • TN4000 (10)
  • TN5015 (10)
  • TN5020 (10)
  • TN5120 (10)
  • TN6010 (2)
  • TN7010 (10)
  • TN7015 (19)
  • TN7025 (19)
  • TN7035 (12)
  • TN7110 (6)
  • TN7115 (17)
  • TN7125 (19)
  • TN7135 (12)
  • TN8025 (17)
  • TTM09 (4)
  • TTR-X (4)
  • TTS (10)
  • W00342 (6)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH25P (2)
  • WBH30P (2)
  • WDN25U (2)
  • WK05CT (14)
  • WK20CT (18)
  • WM15CT (14)
  • WM25CT (17)
  • WM35CT (14)
  • WP15CT (25)
  • WP25CT (25)
  • WP35CT (25)
  • WS10PT (12)
  • WS25PT (14)
  • WU10HT (10)
Wiper Insert
  • N (27)
  • Y (4)
Minimum Axial Groove Diameter
  • 4.724 (15)
to
Minimum Axial Groove Diameter
  • 120.0 (15)
to
Maximum Bore Depth
  • 100.0 (15)
to
Maximum Bore Depth
  • 3.937 (15)
to
frontEnd
Clamp Style
  • M (29)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (10)
  • R-ROUND (6)
  • S-SQUARE 90 (7)
  • T-TRIANGLE 60 (4)
  • V-DIAMOND/RHOMBIC 35 (2)
insertGeometry
Cutting Tool Material
  • B H (4)
  • B L (2)
  • C A (18)
  • C N (14)
  • D P (2)
  • H T (2)
  • H W (27)
backEnd
Back-End Diameter
  • 3.9 (29)
to
Back-End Diameter
  • 100.0 (29)
to
other
Platform
  • KM4X100 (29)
Tool Unit
  • M (29)
Over All Length [L]
  • 100.0 (29)
to
Over All Length [L]
  • 3.937 (29)
to
Insert Hand
  • N (27)
Cutting Condition Material
  • H-All (12)
  • K-All (25)
  • M-All (17)
  • N-All (12)
  • P-All (27)
  • S-All (17)
  • S4 (2)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM4X™ 100 Schneidköpfe

M-Klemmung
(2 Products)
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
  • Shank: KM4X™Shank: KM4X™
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
5337806 KM4X100MCKNL19 KM4X100MCKNL19 100.0000 3.937 63.0000 2.480 120.0000 4.724 CN..190612/CN..643 4.87 10.74
    5337807 KM4X100MCKNR19 KM4X100MCKNR19 100.0000 3.937 63.0000 2.480 120.0000 4.724 CN..190612/CN..643 4.80 10.58
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      KM4X™ 100 Schneidköpfe

      M-Klemmung
      (4 Products)
      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
      • Shank: KM4X™Shank: KM4X™
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
      5337808 KM4X100MCLNL19 KM4X100MCLNL19 100.0000 3.937 63.0000 2.480 120.0000 4.724 CN..190612/CN..643 4.49 9.89
        5337809 KM4X100MCLNL25 KM4X100MCLNL25 100.0000 3.937 63.0000 2.480 120.0000 4.724 CN..250924/CN..866 4.48 9.88
          5337810 KM4X100MCLNR19 KM4X100MCLNR19 100.0000 3.937 63.0000 2.480 120.0000 4.724 CN..190612/CN..643 4.45 9.82
            5337811 KM4X100MCLNR25 KM4X100MCLNR25 100.0000 3.937 63.0000 2.480 120.0000 4.724 CN..250924/CN..866 4.48 9.88
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM4X™ 100 Schneidköpfe

              M-Klemmung
              (4 Products)
              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              • Shank: KM4X™Shank: KM4X™
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              5337812 KM4X100MCRNL19 KM4X100MCRNL19 100.0000 3.937 58.0000 2.283 CN..190612/CN..643 4.53 9.98
                5337813 KM4X100MCRNL25 KM4X100MCRNL25 100.0000 3.937 58.0000 2.283 CN..250924/CN..866 4.57 10.06
                  5337814 KM4X100MCRNR19 KM4X100MCRNR19 100.0000 3.937 58.0000 2.283 CN..190612/CN..643 4.47 9.86
                    5337815 KM4X100MCRNR25 KM4X100MCRNR25 100.0000 3.937 58.0000 2.283 CN..250924/CN..866 4.58 10.09
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      KM4X™ 100 Schneidköpfe

                      M-Klemmung
                      (6 Products)
                      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                      • Shank: KM4X™Shank: KM4X™
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                      5337737 KM4X100MRGNL12 KM4X100MRGNL12 100.0000 3.937 63.0000 2.480 120.0000 4.724 RN..120400/RN..43 4.59 10.13
                        5337738 KM4X100MRGNL19 KM4X100MRGNL19 100.0000 3.937 63.0000 2.480 120.0000 4.724 RN..190600/RN..64 4.60 10.15
                          5337739 KM4X100MRGNL25 KM4X100MRGNL25 100.0000 3.937 63.0000 2.480 120.0000 4.724 RN..250900/RN..86 4.62 10.20
                            5337734 KM4X100MRGNR12 KM4X100MRGNR12 100.0000 3.937 63.0000 2.480 120.0000 4.724 RN..120400/RN..43 1.52 9.97
                              5337735 KM4X100MRGNR19 KM4X100MRGNR19 100.0000 3.937 63.0000 2.480 120.0000 4.724 RN..190600/RN..64 4.52 9.97
                                5337736 KM4X100MRGNR25 KM4X100MRGNR25 100.0000 3.937 63.0000 2.480 120.0000 4.724 RN..250900/RN..86 4.55 10.03
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  KM4X™ 100 Schneidköpfe

                                  M-Klemmung
                                  (2 Products)
                                  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                  • Shank: KM4X™Shank: KM4X™
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                  5337697 KM4X100MSDNN19 KM4X100MSDNN19 100.0000 3.937 0.0000 .0000 SN..190612/SN..643 3.97 8.76
                                    5337698 KM4X100MSDNN25 KM4X100MSDNN25 100.0000 3.937 0.0000 .0000 SN..250924/SN..856 3.97 8.76
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      KM4X™ 100 Schneidköpfe

                                      M-Klemmung
                                      (1 Products)
                                      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                      • Shank: KM4X™Shank: KM4X™
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                      5337711 KM4X100MSKNR19 KM4X100MSKNR19 100.0000 3.937 63.0000 2.480 120.0000 4.724 SN..190612/SN..643 4.59 10.12
                                        List price:
                                        Discount: %
                                        Your price::
                                        Replacement This item is not available
                                        Replacement Product This item may be available through a distributor
                                        Qty
                                        KM4X™ 100 Schneidköpfe

                                        M-Klemmung
                                        (4 Products)
                                        • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                        • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                        • Shank: KM4X™Shank: KM4X™
                                        View Products
                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                        5337713 KM4X100MSRNL19 KM4X100MSRNL19 100.0000 3.937 58.0000 2.283 SN..190612/SN..643 4.44 9.78
                                          5337714 KM4X100MSRNL25 KM4X100MSRNL25 100.0000 3.937 58.0000 2.283 SN..250924/SN..866 4.41 9.73
                                            5337715 KM4X100MSRNR19 KM4X100MSRNR19 100.0000 3.937 58.0000 2.283 SN..190612/SN..643 4.47 9.85
                                              5337716 KM4X100MSRNR25 KM4X100MSRNR25 100.0000 3.937 58.0000 2.283 SN..250924/SN..856 4.46 9.83
                                                List price:
                                                Discount: %
                                                Your price::
                                                Replacement This item is not available
                                                Replacement Product This item may be available through a distributor
                                                Qty
                                                KM4X™ 100 Schneidköpfe

                                                M-Klemmung
                                                (4 Products)
                                                • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                • Shank: KM4X™Shank: KM4X™
                                                View Products
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                5337719 KM4X100MTJNL27 KM4X100MTJNL27 100.0000 3.937 63.0000 2.480 TN..270612/TN..543 4.82 10.62
                                                  5337730 KM4X100MTJNL33 KM4X100MTJNL33 100.0000 3.937 63.0000 2.480 TN..330912/TN..663 4.79 10.57
                                                    5337717 KM4X100MTJNR27 KM4X100MTJNR27 100.0000 3.937 63.0000 2.480 TN..270612/TN..543 4.75 10.49
                                                      5337718 KM4X100MTJNR33 KM4X100MTJNR33 100.0000 3.937 63.0000 2.480 TN..330912/TN..663 4.76 10.49
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        Qty
                                                        KM4X™ 100 Schneidköpfe

                                                        M-Clamping
                                                        (2 Products)
                                                        • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                        • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                        • Shank: KM4X™Shank: KM4X™
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                        5337731 KM4X100MVUNL16 KM4X100MVUNL16 100.0000 3.937 63.0000 2.480 120.0000 4.724 VN..160408/VN..332 4.90 10.81
                                                          5337732 KM4X100MVUNR16 KM4X100MVUNR16 100.0000 3.937 63.0000 2.480 120.0000 4.724 VN..160408/VN..332 4.57 10.08
                                                            List price:
                                                            Discount: %
                                                            Your price::
                                                            Replacement This item is not available
                                                            Replacement Product This item may be available through a distributor
                                                            Qty
                                                            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                            You are about to create a duplicate . Do you want to proceed?
                                                            You are about to delete Do you want to proceed?
                                                            What would you like to rename your to?
                                                            Please enter a valid name
                                                            Please enter a name for the duplicate
                                                            Please enter a valid name
                                                            You are about to add to your My Solutions page. Do you want to proceed?
                                                            Please enter a valid name
                                                            Send a copy of

                                                            Please enter a valid Email
                                                            Please enter a valid name

                                                            We have found the following CAD Drawings

                                                            Select the files you are looking for and download them all at once

                                                            You should be logged to see your dashboard information
                                                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                            item(s) successfully added to the cart
                                                            View Cart