Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

Top Notch® Gewindedrehen und Einstechen

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (13)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (13)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (13)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (13)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (13)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (13)
  • M Stainless Steel (13)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (13)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (13)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (13)
  • K Cast Iron (13)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (13)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (13)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (13)
  • N Non-Ferrous Materials (13)
    • N1
      Wrought Aluminum
      (13)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (13)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (13)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (13)
    • N6
      Carbon, Graphite Composites, CFRP
      (13)
    • N7
      MMC's
      (9)
  • S High-Temp Alloys (13)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (13)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (13)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (13)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (13)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC
      (9)
    • H2
      Hardened Materials 48-55 HRC
      (7)
    • H3
      Hardened Materials 56-60 HRC
      (7)
    • H4
      Hardened Materials >60 HRC
      (7)
Applications
  • Back Boring Back Boring (13)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (13)
  • Blind Hole Finishing Blind Hole Finishing (13)
  • Chamfer Turning Chamfer Turning (13)
  • Cut-Off Cut-Off (13)
  • Deep Grooving Deep Grooving (13)
  • Face Grooving Face Grooving (13)
  • Facing Facing (13)
  • Grooving Grooving (13)
  • ID Facing ID Facing (5)
  • ID Grooving ID Grooving (13)
  • ID Thread Turning ID Thread Turning (13)
  • Multiple Direction Cutting Multiple Direction Cutting (13)
  • OD Thread Turning OD Thread Turning (13)
  • Plunge Turning Plunge Turning (13)
  • Profiling Profiling (13)
  • TRN Boring TRN Boring (13)
  • Threading Threading (13)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (13)
  • Through Hole Finishing Through Hole Finishing (13)
  • Turning Turning (13)
Type of Thread
  • 60 (7)
  • ACME (9)
  • API (7)
  • API RD (5)
  • BSW (3)
  • BUTTRESS (7)
  • M (3)
  • NPT (3)
  • STUB ACME (3)
  • UN (7)
  • UNJ (3)
Cutting Condition
  • Heavily Interrupted Cut (13)
  • Lightly Interrupted Cut (13)
  • Smooth Cut (13)
  • Varying Depth of Cut (13)
Tool Cutting Edge Angle
  • 90.0 (13)
to
Connection Style
  • KM (5)
Cutting Edges Per Insert
  • 1.0 (7)
  • 2.0 (13)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (2)
  • 0.051 (2)
  • 0.057 (1)
  • 0.066 (3)
  • 0.076 (7)
  • 0.08 (3)
  • 0.089 (2)
  • 0.09 (2)
  • 0.094 (3)
  • 0.097 (1)
  • 0.1 (3)
  • 0.102 (3)
  • 0.116 (2)
  • 0.117 (1)
  • 0.127 (3)
  • 0.131 (3)
  • 0.132 (3)
  • 0.133 (3)
  • 0.15 (3)
  • 0.155 (3)
  • 0.157 (3)
  • 0.16 (4)
  • 0.165 (7)
  • 0.173 (3)
  • 0.178 (3)
  • 0.19 (7)
  • 0.191 (7)
  • 0.198 (3)
  • 0.2 (3)
  • 0.202 (3)
  • 0.224 (3)
  • 0.235 (3)
  • 0.244 (2)
  • 0.25 (3)
  • 0.251 (3)
  • 0.254 (7)
  • 0.255 (2)
  • 0.269 (3)
  • 0.282 (3)
  • 0.284 (3)
  • 0.3 (3)
  • 0.315 (5)
  • 0.318 (11)
  • 0.33 (3)
  • 0.34 (3)
  • 0.343 (6)
  • 0.356 (3)
  • 0.404 (3)
  • 0.406 (5)
  • 0.43 (3)
  • 0.445 (7)
  • 0.472 (2)
  • 0.49 (3)
  • 0.508 (3)
  • 0.565 (2)
  • 0.57 (1)
  • 0.572 (11)
  • 0.575 (6)
  • 0.787 (3)
  • 0.826 (6)
  • 0.902 (7)
  • 1.0 (3)
  • 1.194 (3)
  • 1.195 (1)
  • 1.25 (3)
  • 1.5 (3)
  • 1.585 (3)
  • 1.588 (7)
  • 1.59 (2)
  • 1.75 (3)
  • 1.98 (1)
  • 1.981 (3)
  • 2.0 (7)
  • 2.25 (7)
  • 2.388 (7)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (2)
  • 0.0023 (1)
  • 0.0026 (3)
  • 0.003 (7)
  • 0.0031 (3)
  • 0.0035 (2)
  • 0.0037 (3)
  • 0.0038 (1)
  • 0.004 (3)
  • 0.0046 (3)
  • 0.005 (3)
  • 0.0052 (3)
  • 0.0053 (3)
  • 0.0059 (3)
  • 0.006 (3)
  • 0.0062 (3)
  • 0.0065 (7)
  • 0.0068 (3)
  • 0.007 (3)
  • 0.0075 (7)
  • 0.0078 (3)
  • 0.0079 (2)
  • 0.008 (3)
  • 0.0088 (3)
  • 0.0093 (3)
  • 0.0096 (2)
  • 0.0099 (3)
  • 0.01 (7)
  • 0.0106 (3)
  • 0.0111 (3)
  • 0.0112 (3)
  • 0.0118 (3)
  • 0.0124 (3)
  • 0.0125 (11)
  • 0.013 (3)
  • 0.0135 (7)
  • 0.014 (3)
  • 0.0159 (3)
  • 0.016 (5)
  • 0.017 (3)
  • 0.0175 (7)
  • 0.0186 (2)
  • 0.0193 (3)
  • 0.02 (3)
  • 0.0225 (11)
  • 0.031 (3)
  • 0.0325 (6)
  • 0.0355 (7)
  • 0.0394 (3)
  • 0.047 (3)
  • 0.0492 (3)
  • 0.0591 (3)
  • 0.0625 (7)
  • 0.0689 (3)
  • 0.078 (3)
  • 0.0787 (7)
  • 0.0886 (7)
  • 0.094 (7)
  • 0.0984 (4)
  • 0.106 (1)
  • 0.125 (4)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (3)
  • K313 (7)
  • K420 (13)
  • K4H (3)
  • K68 (13)
  • KB1345 (7)
  • KB1630 (7)
  • KB5625 (3)
  • KC250 (3)
  • KC5010 (9)
  • KC5025 (13)
  • KC5410 (7)
  • KC710 (7)
  • KC720 (7)
  • KC722 (7)
  • KC730 (9)
  • KC732 (3)
  • KC810 (13)
  • KC850 (13)
  • KC910 (3)
  • KC9110 (7)
  • KC9120 (3)
  • KC9320 (7)
  • KC935 (7)
  • KC950 (7)
  • KCK20 (7)
  • KCK20B (7)
  • KCP10B (7)
  • KCP25B (7)
  • KCU10 (9)
  • KCU25 (11)
  • KD050 (2)
  • KD081 (3)
  • KD100 (5)
  • KD120 (7)
  • KD1425 (3)
  • KT175 (3)
  • KT315 (7)
  • KU10T (7)
  • KU25T (7)
  • KU30T (7)
  • KY3000 (7)
  • THM (3)
  • TN10P (5)
  • TN6010 (7)
  • TN6025 (11)
  • TN7110 (7)
  • WU10HT (2)
  • WU10PT (4)
  • WU25PT (1)
Hand Of Tool
  • L (2)
  • R (3)
Wiper Insert
  • N (13)
Minimum Axial Groove Diameter
  • 0.0 (5)
  • 1.626 (1)
  • 1.874 (1)
  • 2.252 (2)
  • 3.5 (1)
  • 4.173 (8)
  • 5.5 (1)
  • 6.874 (1)
  • 8.252 (2)
  • 8.752 (2)
  • 13.11 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (5)
  • 41.3 (1)
  • 47.6 (1)
  • 57.2 (2)
  • 88.9 (1)
  • 106.0 (8)
  • 139.7 (1)
  • 174.6 (1)
  • 209.6 (2)
  • 222.3 (2)
  • 333.0 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (12)
to
Maximum Axial Groove Diameter
  • 393.661 (12)
to
Cutting Direction
  • E (5)
Rake Angle Style
  • NEUTRAL (ZERO) (5)
Maximum Bore Depth
  • 70.0 (8)
to
Maximum Bore Depth
  • 2.756 (8)
to
frontEnd
Clamp Style
  • N (13)
Insert Shape
  • TN-TOP NOTCH (13)
Cutting Width
  • 1.0 (3)
  • 1.19 (1)
  • 1.194 (3)
  • 1.2 (3)
  • 1.5 (3)
  • 1.57 (3)
  • 1.575 (3)
  • 1.75 (3)
  • 1.829 (3)
  • 1.981 (3)
  • 2.0 (3)
  • 2.2 (3)
  • 2.235 (3)
  • 2.24 (2)
  • 2.25 (1)
  • 2.388 (3)
  • 2.39 (1)
  • 2.464 (3)
  • 2.5 (3)
  • 2.667 (3)
  • 2.743 (3)
  • 2.75 (3)
  • 2.794 (3)
  • 2.997 (3)
  • 3.0 (7)
  • 3.099 (3)
  • 3.17 (3)
  • 3.175 (7)
  • 3.18 (2)
  • 3.2 (7)
  • 3.25 (3)
  • 3.251 (3)
  • 3.32 (2)
  • 3.329 (2)
  • 3.5 (7)
  • 3.607 (3)
  • 3.96 (3)
  • 3.962 (3)
  • 3.974 (2)
  • 3.988 (3)
  • 4.0 (7)
  • 4.24 (1)
  • 4.242 (7)
  • 4.25 (2)
  • 4.3 (3)
  • 4.5 (7)
  • 4.521 (3)
  • 4.699 (5)
  • 4.775 (7)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (3)
  • 4.801 (7)
  • 4.81 (3)
  • 4.88 (2)
  • 4.95 (3)
  • 5.0 (4)
  • 5.004 (8)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.537 (2)
  • 5.563 (4)
  • 6.0 (8)
  • 6.35 (10)
  • 6.36 (2)
  • 6.48 (4)
  • 7.01 (4)
  • 7.137 (6)
  • 7.925 (6)
  • 8.001 (2)
  • 8.738 (4)
  • 8.992 (4)
  • 9.525 (6)
  • 9.65 (4)
  • 9.73 (2)
to
Cutting Width
  • 0.0394 (3)
  • 0.047 (3)
  • 0.0472 (3)
  • 0.0591 (3)
  • 0.062 (3)
  • 0.0689 (3)
  • 0.072 (3)
  • 0.078 (3)
  • 0.0787 (3)
  • 0.079 (2)
  • 0.0866 (3)
  • 0.088 (3)
  • 0.0886 (1)
  • 0.094 (3)
  • 0.097 (3)
  • 0.0984 (3)
  • 0.105 (3)
  • 0.108 (3)
  • 0.1083 (3)
  • 0.11 (3)
  • 0.118 (3)
  • 0.1181 (7)
  • 0.122 (3)
  • 0.125 (7)
  • 0.126 (7)
  • 0.128 (3)
  • 0.131 (2)
  • 0.1378 (7)
  • 0.142 (3)
  • 0.156 (3)
  • 0.157 (3)
  • 0.1574 (7)
  • 0.1575 (7)
  • 0.167 (7)
  • 0.1673 (2)
  • 0.169 (3)
  • 0.1771 (7)
  • 0.1772 (7)
  • 0.178 (3)
  • 0.185 (5)
  • 0.188 (7)
  • 0.189 (7)
  • 0.192 (2)
  • 0.195 (3)
  • 0.1969 (4)
  • 0.197 (8)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.218 (2)
  • 0.219 (4)
  • 0.2362 (8)
  • 0.25 (10)
  • 0.255 (4)
  • 0.276 (4)
  • 0.281 (6)
  • 0.312 (6)
  • 0.315 (2)
  • 0.344 (4)
  • 0.354 (4)
  • 0.375 (6)
  • 0.38 (4)
  • 0.383 (2)
to
Maximum Cutting Depth
  • 5.33 (2)
  • 7.47 (2)
  • 7.61 (2)
  • 10.54 (2)
to
Maximum Cutting Depth
  • 0.21 (2)
  • 0.294 (2)
  • 0.3 (2)
  • 0.415 (2)
to
Insert Size
  • 3 (3)
  • 4 (4)
  • 5 (4)
  • 6 (2)
insertGeometry
Cutting Tool Material
  • B H (7)
  • B L (3)
  • C N (7)
  • D P (5)
  • H T (7)
  • H W (13)
backEnd
Connection Type
  • TAPER SHANK (5)
System Size
  • KM80TS (5)
Back-End Diameter
  • 3.1496 (13)
to
Back-End Diameter
  • 80.0 (13)
to
other
Platform
  • KM80 (3)
  • KM80TS (1)
Tool Unit
  • M (13)
Over All Length [L]
  • 70.0 (11)
  • 80.0 (2)
to
Over All Length [L]
  • 2.7559 (3)
  • 2.756 (8)
  • 3.1496 (2)
to
Insert Hand
  • L (6)
  • R (7)
Display Obsolete Products
  • true (13)
  • false (9)
Cutting Condition Material
  • H-All (13)
  • K-All (13)
  • M-All (13)
  • N-All (13)
  • P-All (13)
  • S-All (13)
No filters matching ""
View Products in
Metric
Inch
KM80TS™ Schneidköpfe

Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
(8 Products)
  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3665053 KM80TSNEL3 KM80TSNEL3 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG3R 2.14 4.72
    3665055 KM80TSNEL4 KM80TSNEL4 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG4R 2.18 4.81
      3665057 KM80TSNEL5 KM80TSNEL5 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG5R 2.28 5.02
        3665059 KM80TSNEL6 KM80TSNEL6 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG6R 2.18 4.80
          3665054 KM80TSNER3 KM80TSNER3 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG3L 2.14 4.72
            3665056 KM80TSNER4 KM80TSNER4 70.0000 2.756 53.0000 2.087 106.0000 4.173 NG4L 2.18 4.81
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              KM80TS™ Schneidköpfe

              Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
              (5 Products)
              • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              3668865 KM80TSNSL4 KM80TSNSL4 70.0000 2.755 53.0000 2.086 NG4L 1.97 4.35
                3668867 KM80TSNSL5 KM80TSNSL5 80.0000 3.149 53.0000 2.086 NG5L 2.27 5.01
                  3668864 KM80TSNSR3 KM80TSNSR3 70.0000 2.755 53.0000 2.086 NG3R 1.96 4.32
                    3668866 KM80TSNSR4 KM80TSNSR4 70.0000 2.755 53.0000 2.086 NG4R 1.94 4.28
                      3668868 KM80TSNSR5 KM80TSNSR5 80.0000 3.149 53.0000 2.086 NG5R 2.25 4.95
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor

                        HILFE

                        Chatten Sie mit einem Zerspanungsexperten.

                        Von 8:00 Uhr bis 18:00 Uhr Eastern Standard Time

                        Produkt

                        E-Mail-Adresse

                        +1 (888) 539 5145

                        Bestellen

                        E-Mail-Adresse

                        +1 (800) 979 4342

                        UNTERNEHMEN

                        Arbeiten Sie in unserem Expertenteam

                        Wir über uns

                         

                        UNSERE MARKEN

                        DOWNLOADS

                        SHOP

                        WIDIA-Werbeartikel kaufen

                        WIDIA-Produkte bei Amazon kaufen


                         

                         

                         


                        BLEIBEN SIE IN KONTAKT

                         

                        © 2021 WIDIA Product Group, Datenschutzrichtlinie

                        If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                        You are about to create a duplicate . Do you want to proceed?
                        You are about to delete Do you want to proceed?
                        What would you like to rename your to?
                        Please enter a valid name
                        Please enter a name for the duplicate
                        Please enter a valid name
                        You are about to add to your My Solutions page. Do you want to proceed?
                        Please enter a valid name
                        Send a copy of

                        Please enter a valid Email
                        Please enter a valid name

                        We have found the following CAD Drawings

                        Select the files you are looking for and download them all at once

                        Can’t find the file type you’re looking for?
                        Request Drawings »

                        You should be logged to see your dashboard information
                        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                        item(s) successfully added to the cart
                        View Cart